[U-Boot-Users] MMC/SD support for AT91SAM9261EK-board

Ulf Samuelsson ulf at atmel.com
Mon Dec 4 22:17:13 CET 2006

Haavard Skinnemoen skrev:
> On 12/1/06, Lutz Ballaschke <lutz.ballaschke at i2se.com> wrote:
>> Hi there,
>> has anyone tried this before?
>> I just know this board being supported by the atmel-patch for
>> u-boot-1.1.4 and there is no MMC/SD support included.
>> Might it be possible to adapt any existing source code?
>> (possibly the AT91RM9200dk sources)?
> I've got one for AT32AP7000, which uses basically the same MMC
> controller. I'll see if I can get it cleaned up for submission in a
> couple of days, although I've got some quite intrusive changes for
> AVR32 waiting for approval at the moment...
> If you're using 1.1.4, you could of course try to pull the driver out
> of the patch at
> http://avr32linux.org/twiki/pub/Main/UbootPatches/u-boot-1.1.4-avr32-20060621.patch...
> Håvard

There is SD/MMC support in one of the AT91 Forums at www.at91.com
Either Linux or ARM9.
This was ported to U-.Boot 1.1.3 but I assume it is not a big deal
to port it to 1.1.4 or later.
/Ulf Samuelsson

More information about the U-Boot mailing list