[U-Boot-Users] closer to nboot

Charles Krinke ckrinke at istor.com
Mon Dec 18 01:09:49 CET 2006


I'm definitely getting closer so will answer part of my own question, but propose the next one.
 
The following is working (mostly)
 
uboot> tftp 0x1000000 uImage (its slightly smaller then 1Mbyte) 
uboot> nand write.jffs2 0x1000000 0x0 0x1000000
uboot> setenv bootdevice 0
uboot> nboot 0x1000000
 
At this point, I see:
 
Loading from NAND 256MiB 3.3V, 8-bit, offset 0x0
  Image Name: Linux-2.6.17.11
  Image Type: PowerPC Linux Kernel Image (gzip compressed)
  Data Size: 937470 Bytes
  Load Address: 00000000
  Entry Point: 00000000
 
And then I get the uboot prompt back.
 
I had thought that giving the address to the nboot command would get me a bit further, but apparently not. Also, I should note that I dont have mtdids or mtdparts defined at this stage. My assumption is that we are doing a raw write and read from the flash and that the .jffs2 argument just deals with the oob (out-of-band) bytes in a jffs2 manner.
 
Charles


More information about the U-Boot mailing list