[U-Boot-Users] u-boot hangs on boot time

[tony]

>> 
>>     my u-boot-1.1.1 hangs while booting, as follow is the message got from the serial:
>
>General rule: in case of problems  try  using  current  code.  U-Boot
>1.1.1 is obsolete.
yes,I know..but under some reasons we still use this version.and it works well.:)
>
>Second: it would have been really nice if you  had  mentioned  whioch
>board / processor this is.
it's s3c2410.

>
>> after some tests by tracing the sequences of the funtions, I found that the u-boot hangs while comming  to this funtion:
>> device_register (&dev),which is a subfuntion  of drv_system_init (); -------in u-boot-1.1.1/common/devices.c
>
>THis code has been running fine for ages. My guess is memory problems
>on your hardware.
----------maybe,but I have replaced the two sdram for a test,the problem still exists.
>
>> I am so dizzy about what's going on there. the u-boot has been using for months....so I don't think it's the problem of the u-boot.maybe it's about the problem of the hardware, to cause the u-boot hangs???
>
>Did you try it on another board?
>
>> --=====003_Dragon177227050737_=====
>> Content-Type: text/html;
>> 	charset="gb2312"
>> Content-Transfer-Encoding: 7bit
>
>STOP posting HTML here!!!
--------sorry,it's my fault.I don't get used to this email editor.:(

regards

tony