[U-Boot-Users] Start with u-boot on at91rm9200 on AT91RM9200-EK

[Wolfgang Denk]

In message <F6726C3E89A64840A5E10310E342A38F01BE93CA at xchback01.back.harting.intra> you wrote:
>
> for the first step of reproducing a runnig u-boot i use the original
> Atmel Board.
> Here the u-boot does nothing after load with loader.bin.
> The Atmel delivered u-boot.bin does normal work.
> U-boot is build with the desribed steps without any Error Messages.
> 
> make at91rm9200dk_config
> make all

What makes you think the default configuration of U-Boot  would  need
any loader.bin stuff? Instead, it will boot directly.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Wisdom is one of the few things that looks bigger the further away it
is.                               - Terry Pratchett, _Witches Abroad_