[U-Boot-Users] Loadb issue

[Andreas Schweigstill]

Dear Banajit!

Banajit Goswami schrieb:
 > Content-Type: text/html; charset=ISO-8859-1
 > Content-Transfer-Encoding: 7bit
 > Content-Disposition: inline

Please do not post messages in HTML format to this list.

>   3) at u-boot command prompt gave following command
>          => loadb 0x60008000 115200
>   4) From hyperterminal, Transfer->send file with protocol as kermit, 
> selected the file and tried sending, but failed. Everytime  
> hyperterminal poped up "error limit exceeded".

Are you sure that you are using the same baudrate for terminal mode
and kermit mode? Do the RS232 level converters have their own supply
or do they get it from the modem control lines? Although you selected
no handshake this doesn't neccessarily mean that the control lines
don't get toggled.

With best regards
Andreas Schweigstill

-- 
Dipl.-Phys. Andreas Schweigstill
Schweigstill IT | Embedded Systems
Schauenburgerstraße 116, D-24118 Kiel, Germany
Phone: (+49) 431 5606-435, Fax: (+49) 431 5606-436
Mobile: (+49) 171 6921973, Web: http://www.schweigstill.de/