[U-Boot-Users] No serial output from mips/au1550

[Leonid]

I have x86 host and PPC440E target. I tried to step through code, but
looks like my GDB version is wrong. Do you have any good HOWTO for such
a setup with BDI2000 (it' 1st time I am using it)?

Thanks,

Leonid. 

-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net
[mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of mitsy
Sent: Wednesday, July 19, 2006 12:43 PM
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] No serial output from mips/au1550

I'm using BDI2000 to debug my version of u-boot, which is still under
development. I can step through the code via telnet with bdi, but I'm
not seeing any output on serial port when it's supposed to be writing
stuff out. The only time I see anything on the serial console is when
I reset the target, before running anything. It spits put some
garbage.

Within board_init_f(), both init_baudrate and serial_init seem to be
running fine. Has anybody experienced something similar to this? If
so, what am I missing to make it work?

TIA!

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE
V
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users