[U-Boot-Users] HELP! can't save environment variables

[Joe Culler]

On 3/17/06, Wolfgang Denk  wrote:
> In message  you wrote:
> >
> > I ported u-boot to my customized s3c2410 board. My board uses
> > NOR flash SST39xF1601(2MB). Everything seems to be ok except it
> > can't save environment variables using saveenv command.
>
> Then your flash configuration does not match your hardware.
>
> > Would you tell me how to solve that issue? Thanks.
>
> Fix your configuration.

Thank you for your quick reply. As you mentioned, you mean I should modify
 board/smdk2410/flash.c for my s3c2410 customized board? I guess my
include/configs/smdk2410.h with no problem...

Thanks again,
Joe.