[U-Boot-Users] Booting ELDK 4.0 kernel on MPC8548CDS
Thomas Schafer
thomas.schaefer at kontron.com
Wed Nov 22 19:55:46 CET 2006
Hi,
I'm using a MPC8548CDS eval system with u-boot 1.1.6 running on it. When
trying to boot an ELDK 4.0 kernel, the board hangs immediately after
decompression of the kernel. I've set the disable_of environment
variable to avoid usage of the flat device tree.
The same kernel boots properly when using u-boot 1.1.3 which is
delivered with the eval system.
Any hints would be appreciated.
Best regards,
Thomas Schafer
____________________________________
Kontron Modular Computers GmbH
Heinrich-Barth-Str. 1a
66115 Saarbrucken
Tel.: + 49 (0)681 / 95916 - 203
Fax: + 49 (0)681 / 95916 - 100
E-mail: thomas.schaefer at kontron.com
More information about the U-Boot
mailing list