[U-Boot-Users] Still trying to get a stable 2.6.20.4 running on 8349ITX evalboard

[Timur Tabi]

On Thu, 12 Apr 2007 14:58:17 -0700
Bruce_Leonard at selinc.com wrote:

> about memory timing I remembered that the 8349itx u-boot port allows the 
> choice of using SPD for detecting the DDR RAM or using hard coded defaults 
> in the memory controller.  I figured what the heck, I'll give the hard 
> coded values a try even though they were probably wrong for the particular 
> part I've got installed.  And the bloody thing ran!  I had it executing a 

Those numbers were obtained by running the SPD code on the MPC8349E-mITX, and seeing what 
it spit out.  Then I just plugged those numbers into the board header file, with the hopes 
that it might work for someone.  I'm glad it did!

-- 
Timur Tabi
Linux Kernel Developer @ Freescale