[U-Boot-Users] Are there any instructions how to compile U-boot for ixp425 target?

[nitinn]

Hi ,

     I too am new in this field but working on same thing but on IXP420
Platform for Router board.

     Will Let u know once i am done . 

     Keep going till then . Best of luck . Hope others also reply to us
.....

Warm Regards
   Nitin 



Queenie wrote:
> 
> Hi,
> 
> Iam a newbie to this field. I too Iam trying to port a bootloader on my
> customed IXP425 board.
> Iam using Ixdp425 as my reference. 
> 
> I have downloaded U-boot 1.1.3 verson. Also I have downloaded a cross
> compiler from gnu site cross-3.0 for arm architecture. 
> My first step was to untar the arm cross-3.0 toolchain and place it in the
> /usr/local/ directory.
> Then I added this path in the .bash_profile file
> ($PATH=/usr/local/3.0/bin)
> Then i untarred the u-boot 1.1.3 source, went into the directory and did a
> make ixdp425_config
> It did successfully, later I tried compiling the source for U-boot by
> giving a simple make.
> it started fine but later gave the error searching for IxNpeMicrocode.c.
> I went to the download centre, and downloaded the npe (IxNpeMicrocode.c
> and placed it in the u-boot-1.1.6/ixp/cpu/ixp/npe)
> then did the "make" again. 
> Now its again giving error for the file IxEthAccDataPlane.c
> 
> Can you please help me how to go ahaed with this?
> 
> Is my cross complier the wrong one? Is there any place where I can check
> it the endianness ?
> 
> Please help!
> 
> Warm Regards
> Queenie
> 
> 
> 
> Stefan Roese wrote:
>> 
>> On Thursday 07 June 2007, Teemu Keskinarkaus wrote:
>>> I took the advice and tried fresh u-boot. I pulled latest u-boot-ixp
>>> from GIT and modified the include/configs/ixdp425.h file so that it
>>> would match my current one on those parts that has something to do with
>>> the hardware. That's only file I modified.
>> 
>> OK.
>> 
>>> Then I gave commands:
>>>
>>> make ARCH=arm CROSS_COMPILE=armeb-unknown-linux-gnu-  ixpd425_config
>>>
>>> make ARCH=arm CROSS_COMPILE=armeb-unknown-linux-gnu-
>>>
>>> The latter command stopped to error:
>>>
>>> make -C cpu/ixp/npe/
>>>
>>> make[1]: Entering directory
>>> `/home/teemu/tmp/u-boot/u-boot-ixp/cpu/ixp/npe'
>>>
>>> make[1]: *** No rule to make target `IxNpeMicrocode.c', needed by
>>> `.depend'.  Stop.
>> 
>> 
>> Yes, that's expected. Unfortunately not documented. Sorry.
>> 
>>> I checked and that file is missing so I'm guessing here comes the part
>>> where I need the Intel library?
>> 
>> Right.
>> 
>>> I tried to search for instructions what 
>>> to do, but I couldn't find any and I vaguely remember someone telling
>>> that there isn't at least for ixp. This is first time I'm trying to get
>>> the U-boot to work from the scratch so (detailed) instructions would
>>> help a lot.
>> 
>> You have to download the NPE microcode binary (exactly this missing file
>> from 
>> the Intel download site). Here a link for the newest microcode (I have
>> *not* 
>> tested with this microcode version):
>> 
>> http://downloadcenter.intel.com/detail_desc.aspx?ProductID=2100&DwnldID=12954&agr=Y
>> 
>> Could be that you have to register to access this file though.
>> 
>> Best regards,
>> Stefan
>> 
>> =====================================================================
>> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
>> =====================================================================
>> 
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by DB2 Express
>> Download DB2 Express C - the FREE version of DB2 express and take
>> control of your XML. No limits. Just data. Click to get it now.
>> http://sourceforge.net/powerbar/db2/
>> _______________________________________________
>> U-Boot-Users mailing list
>> U-Boot-Users at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>> 
>> 
> 
> 

-- 
View this message in context: http://www.nabble.com/Are-there-any-instructions-how-to-compile-U-boot-for-ixp425-target--tf3882453.html#a11093703
Sent from the Uboot - Users mailing list archive at Nabble.com.