[U-Boot-Users] Latest git not working for MPC8349EMDS
MBenedict at twacs.com
Tue May 1 23:12:35 CEST 2007
David Hawkins wrote:
>> I am trying to update U-Boot on my MPC8349EA-MDS.
> How old was the U-Boot version that you upgraded from?
I am upgrading from 1.1.3, that shipped on the board.
> The MPC9349E boot sequence was modified at one point, and
> so to boot a new kernel you had to also change the HRCW.
> I forget the details, but here's my notes ...
> see the comments on p18.
I am pretty confused by your notes as they relate to my image. For me,
I am flashing at fff00000. This is sufficient to brick the board :-D.
It seemed like your notes were reflecting a change in the boot address
between versions? I tried to use the addresses you mention and 1)
fe000000 tells me it is not erased, even after I erase it (?) and 2)
fe700000 seems to have no effect. I thought those were the u-boot
locations for the mpc8349ITX (?).
Just to be clear, I am not even at the point of booting the kernel, just
trying to get to the u-boot prompt of a new u-boot.
I really appreciate the help! Unfortunately, I am just more confused at
More information about the U-Boot