[U-Boot-Users] Latest git not working for MPC8349EMDS
David Hawkins
dwh at ovro.caltech.edu
Wed May 2 20:32:37 CEST 2007
> Thank all for your help with both platforms. I found the value to boot!
Great!
> => md.b f8000000 20
> f8000000: 2f 0c 40 08 82 af 07 33 ff ff 43 12 ff ff ff 02
> /. at ....3..C.....
> f8000010: 22 07 05 19 24 ff ff ff ff ff ff ff ff ff ff ff
> "...$...........
>
> The BMS was high before, so BCSR4 was 86, but for low boot it needs to
> be 82.
>
> Oddly, changing the SW4.5 did not seem to change this(?) I was able to
> write it from u-boot
>
> => mw.b f8000004 82
>
> And that did the trick!
>
> Thank you all. Any ideas why the switch is not working? Currently I
> have to turn the board on, issue the above instruction to set low boot
> mode, then reset. I should be able to power off/on and boot into low
> memory. Any guesses what I am missing?
Sorry, no idea. Perhaps its a change between the E and the EA board.
Let us know if you figure it out :)
Dave
More information about the U-Boot
mailing list