[U-Boot-Users] [PATCH] cfi_flash.c: use addr2info

[Ladislav Michl]

On Wed, May 02, 2007 at 04:50:48PM -0500, Tolunay Orkun wrote:
> I looked at your patch when you submitted but did not carefully review 
> yet. I feel like the function should reside inside the flash driver 
> where it is most often used and flash driver should export it.

I disagree. This function (addr2info) is used also by board specific
drivers as well as by common/cmd_load.c, common/cmd_bootm.c and
common/cmd_mem.c. Therefore it should reside in common/flash.c - to
be used by either board specific driver or cfi driver.

Best regards,
	ladis