[U-Boot-Users] error with patches and u-boot build

[Stefan Roese]

Hi Magda,

On Monday 07 May 2007, Magda Abdelbasit wrote:
> I am building u-boot for the KB9202B board. I got the patches available
> from:
> http://sourceforge.net/tracker/index.php?func=detail&aid=1570316&group_id=6
>5938&atid=512789
>
> http://sourceforge.net/tracker/index.php?func=detail&aid=1576917&group_id=6
>5938&atid=512789
>
> and applied them to u-boot. The kb9202_patch was fine, but the nand patch
> gave the following message:
>
> patching file board/kb9202/Makefile
> Hunk #1 FAILED at 28.
> 1 out of 1 hunk FAILED -- saving rejects to file board/kb9202/Makefile.rej
> patching file board/kb9202/nand.c
> patching file include/configs/kb9202.h
>
>
> The makefile.rej file contains:
>
> ***************
> *** 28,34 ****
>
>   LIB	= lib$(BOARD).a
>
> - OBJS	:= kb9202.o
>
>   $(LIB):	$(OBJS) $(SOBJS)
>   	$(AR) crv $@ $(OBJS) $(SOBJS)
> --- 28,34 ----
>
>   LIB	= lib$(BOARD).a
>
> + OBJS	:= kb9202.o nand.o
>
>   $(LIB):	$(OBJS) $(SOBJS)
>   	$(AR) crv $@ $(OBJS) $(SOBJS)
>
>
> If I continue and build the u-boot I get the following error :
>
> drivers/nand/libnand.a(nand.o): In function `nand_init_chip':
> /home/magda/u-boot-1.1.6/drivers/nand/nand.c:50: undefined reference to
> `board_nand_init'
> make: *** [u-boot] Error 1

The nand_init_chip() function is missing. I assume that you don't compile the 
board nand driver because of the patch conflict with the Makefile. Please 
resolve the conflict manually (use "OBJS := kb9202.o nand.o" instead 
of "OBJS := kb9202.o" and try again.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office:  Kirchenstr. 5,       D-82194 Groebenzell,            Germany
=====================================================================