[U-Boot-Users] Atmel AT49BV320C support in Uboot

[Wolfgang Denk]

In message <926455.96023.qm at web7701.mail.in.yahoo.com> you wrote:
> I tried to use the CFI driver by adding the CFI macros
> in the .h file. But the size of my flash is 2MB, but
> it shows 4MB. 

So you misconfigured something...

> I have one doubt, in the board .h file we specify the
> sectore size. what size i must give the sector size in
> board .h file.

The CFI driver will auto-detect the sector sizes.  You  must  confuse
something here.. Which exact #define are you talking about?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Have you lived in this village all your life?"        "No, not yet."