[U-Boot-Users] R: Booting with attached BDI butnot alone (onlyICTRL remained in BDI cfg)

[Andreas Schweigstill]

Hello!

DI BACCO ANTONIO - technolabs schrieb:
> Thank you for your suggestions but my board is an evaluation board named
> adder875.

Many development boards do not have a quality which would be
acceptable for industrial or even consumer products... Forgotten
pull-up and series resistors or capacitors are quite common.

Keep in mind that many of those boards have been designed before
the processor chip has been available. And marketing/sales departments
force development to release such a board to customers long before it
has been tested.

I have never seen a development board from a semiconductor manufacturer
which doesn't contains any bugs.

With best regards
Andreas Schweigstill

-- 
Dipl.-Phys. Andreas Schweigstill
Schweigstill IT | Embedded Systems
Schauenburgerstraße 116, D-24118 Kiel, Germany
Phone: (+49) 431 5606-435, Fax: (+49) 431 5606-436
Mobile: (+49) 171 6921973, Web: http://www.schweigstill.de/