[U-Boot-Users] Ethernet port

Yasothabalan Ramaswamy-TLS,Chennai yasothabalanr at hcl.in
Tue Sep 18 14:19:44 CEST 2007

Thanks sughosh,

So we can set two Ethernet addresses. 

How can I set two different IP addresses for these two ports?
[Two different IPs
Two different GATEWAYs
Two different SERVERIPs]

Yasotha Balan R

-----Original Message-----
From: urwithsughosh at gmail.com [mailto:urwithsughosh at gmail.com] 
Sent: Wednesday, September 19, 2007 2:49 AM
To: Yasothabalan Ramaswamy-TLS,Chennai
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] Ethernet port

On Tue Sep 18, 2007 at 05:11:44PM +0530, Yasothabalan
Ramaswamy-TLS,Chennai wrote:

> Can anyone say me whether U-Boot supports two Ethernet ports?

  If your processor supports, u-boot supports :-)

> If so, how to set the IP and MAC address for the second one.

  Check the config file for the board you are referring. For eg, the
  ADS board i refer to have the following configurations for setting
  the ip and the mac respectively.


  #define CONFIG_ETHADDR   00:E0:0C:00:00:FD



The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in 
this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of 
this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have 
received this email in error please delete it and notify the sender immediately. Before opening any mail and 
attachments please check them for viruses and defect.


More information about the U-Boot mailing list