No subject
Tue Aug 19 22:18:26 CEST 2008
not responding to anything
I have what i believe to be the correct environment.
baudrate=38400
ethaddr=00:a0:13:00:0a:8c
preboot=echo;echo
clocks_in_mhz=1
kernel_addr=a0100000
bootargs=root=/dev/nfs rw nfsroot=$(serverip):$(rootpath)
ip=$(ipaddr):$(serveri
p):$(gatewayip):$(netmask):$(hostname)::off
bootcmd=bootm a0100000
filesize=9b949
ipaddr=168.10.10.6
serverip=168.10.1.240
stdin=serial
stdout=serial
stderr=serial
Environment size: 340/4092 bytes
I have a number of questions about the interaction with u-boot and the
kernel, which i am hoping can be answered.
Does the kernel require configuration for custom hardware ? By custom
hardware i mean not an off shelf the standard development board.
How does the kernel find out the flash base address. serial port is running
at 38k4 on smc1, the FEC is to be used. IP address etc etc ?
Thanks in Advance
Steve Gray
More information about the U-Boot
mailing list