[U-Boot] [PATCH 03/11] drivers/pci: Create pci_map_bar function
Becky Bruce
beckyb at kernel.crashing.org
Thu Dec 4 06:04:39 CET 2008
It is no longer always true that the pci bus address can be
used as the virtual address for pci accesses. pci_map_bar()
is created to return the virtual address for a pci region.
Signed-off-by: Becky Bruce <beckyb at kernel.crashing.org>
---
drivers/pci/pci.c | 19 +++++++++++++++++++
include/pci.h | 28 ++++++++++++++++++++++++----
2 files changed, 43 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e2b05d8..cb1217f 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -116,6 +116,25 @@ PCI_READ_VIA_DWORD_OP(word, u16 *, 0x02)
PCI_WRITE_VIA_DWORD_OP(byte, u8, 0x03, 0x000000ff)
PCI_WRITE_VIA_DWORD_OP(word, u16, 0x02, 0x0000ffff)
+/* Get a virtual address associated with a BAR region */
+void *pci_map_bar(pci_dev_t pdev, int bar, int flags)
+{
+ pci_addr_t pci_bus_addr;
+ u32 bar_response;
+
+ /* read BAR address */
+ pci_read_config_dword(pdev, bar, &bar_response);
+ pci_bus_addr = (pci_addr_t)(bar_response & ~0xf);
+
+ /*
+ * Pass "0" as the length argument to pci_bus_to_virt. The arg
+ * isn't actualy used on any platform because u-boot assumes a static
+ * linear mapping. In the future, this could read the BAR size
+ * and pass that as the size if needed.
+ */
+ return pci_bus_to_virt(pdev, pci_bus_addr, flags, 0, MAP_NOCACHE);
+}
+
/*
*
*/
diff --git a/include/pci.h b/include/pci.h
index eebe8a8..0d29a10 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -450,10 +450,29 @@ extern pci_addr_t pci_hose_phys_to_bus(struct pci_controller* hose,
#define pci_bus_to_phys(dev, addr, flags) \
pci_hose_bus_to_phys(pci_bus_to_hose(PCI_BUS(dev)), (addr), (flags))
-#define pci_phys_to_mem(dev, addr) pci_phys_to_bus((dev), (addr), PCI_REGION_MEM)
-#define pci_mem_to_phys(dev, addr) pci_bus_to_phys((dev), (addr), PCI_REGION_MEM)
-#define pci_phys_to_io(dev, addr) pci_phys_to_bus((dev), (addr), PCI_REGION_IO)
-#define pci_io_to_phys(dev, addr) pci_bus_to_phys((dev), (addr), PCI_REGION_IO)
+#define pci_virt_to_bus(dev, addr, flags) \
+ pci_hose_phys_to_bus(pci_bus_to_hose(PCI_BUS(dev)), \
+ (virt_to_phys(addr)), (flags))
+#define pci_bus_to_virt(dev, addr, flags, len, map_flags) \
+ map_physmem(pci_hose_bus_to_phys(pci_bus_to_hose(PCI_BUS(dev)), \
+ (addr), (flags)), \
+ (len), (map_flags))
+
+#define pci_phys_to_mem(dev, addr) \
+ pci_phys_to_bus((dev), (addr), PCI_REGION_MEM)
+#define pci_mem_to_phys(dev, addr) \
+ pci_bus_to_phys((dev), (addr), PCI_REGION_MEM)
+#define pci_phys_to_io(dev, addr) pci_phys_to_bus((dev), (addr), PCI_REGION_IO)
+#define pci_io_to_phys(dev, addr) pci_bus_to_phys((dev), (addr), PCI_REGION_IO)
+
+#define pci_virt_to_mem(dev, addr) \
+ pci_virt_to_bus((dev), (addr), PCI_REGION_MEM)
+#define pci_mem_to_virt(dev, addr, len, map_flags) \
+ pci_bus_to_virt((dev), (addr), PCI_REGION_MEM, (len), (map_flags))
+#define pci_virt_to_io(dev, addr) \
+ pci_virt_to_bus((dev), (addr), PCI_REGION_IO)
+#define pci_io_to_virt(dev, addr, len, map_flags) \
+ pci_bus_to_virt((dev), (addr), PCI_REGION_IO, (len), (map_flags))
extern int pci_hose_read_config_byte(struct pci_controller *hose,
pci_dev_t dev, int where, u8 *val);
@@ -484,6 +503,7 @@ extern int pci_hose_write_config_byte_via_dword(struct pci_controller *hose,
extern int pci_hose_write_config_word_via_dword(struct pci_controller *hose,
pci_dev_t dev, int where, u16 val);
+extern void *pci_map_bar(pci_dev_t pdev, int bar, int flags);
extern void pci_register_hose(struct pci_controller* hose);
extern struct pci_controller* pci_bus_to_hose(int bus);
--
1.5.6.5
More information about the U-Boot
mailing list