December 2008 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Dec 1 07:36:15 CET 2008
Ending: Wed Dec 31 22:31:41 CET 2008
Messages: 1219

• [U-Boot] [PATCH] drivers/net/ax88796.h revised   Ben Warren
• [U-Boot] How to backup the working u-boot image from the flash image.   Mohamed Thalib .H
  • [U-Boot] How to backup the working u-boot image from the flash image.   Daniel Mack
    • [U-Boot] How to backup the working u-boot image from the flash image.   Mohamed Thalib .H
• [U-Boot] U-boot freezes on relocate code to RAM   Elison Niven
• [U-Boot] Error compiling UBOOT 1.3.4 for AT91RM9200   Mohamed Thalib .H
• [U-Boot] Fwd: [PATCH] nand booting support (SPL) for phyCORE-i.MX31   Maxim Artamonov
  • [U-Boot] Fwd: [PATCH] nand booting support (SPL) for phyCORE-i.MX31   Magnus Lilja
• [U-Boot] ppc4xx: u-boot sees PCIe endpoint, linux does not.   Benjamin Herrenschmidt
  • [U-Boot] ppc4xx: u-boot sees PCIe endpoint, linux does not.   Leon Woestenberg
    • [U-Boot] ppc4xx: u-boot sees PCIe endpoint, linux does not.   Stefan Roese
• [U-Boot] Error compiling UBOOT 1.3.4 for AT91RM9200   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] Uboot AS Space in MPC85xx Start.S   Vignesh Kumar B
• [U-Boot] Installing Linux kernel, nothing to execute in RAM...   Simon Boman
• [U-Boot] frescale NAND FLASH problems   Carlos kescuin
  • [U-Boot] frescale NAND FLASH problems   Scott Wood
  • [PATCH] tools/mkimage: use lseek rather than fstat for file size for -l option   Peter Korsgaard
    • [U-Boot] [PATCH] tools/mkimage: ignore trailing garbage   Peter Korsgaard
    • [U-Boot] [PATCH] tools/mkimage: use lseek rather than fstat for file size for -l option   Peter Korsgaard
    • [U-Boot] [PATCH] tools/mkimage: use lseek rather than fstat for file size for -l option   Thomas De Schampheleire
    • [U-Boot] [PATCH] tools/mkimage: use lseek rather than fstat for file size for -l option   Peter Korsgaard
    • [U-Boot] [PATCH] tools/mkimage: use lseek rather than fstat for file size for -l option   Wolfgang Denk
    • [U-Boot] [PATCH] tools/mkimage: use lseek rather than fstat for file size for -l option   Peter Korsgaard
    • [U-Boot] [PATCH] tools/mkimage: use lseek rather than fstat for file size for -l option   Wolfgang Denk
    • [U-Boot] [PATCH] tools/mkimage: use lseek rather than fstat for file size for -l option   Peter Korsgaard
  • [U-Boot] [PATCH v2] nand: Fix cache and memory inconsistent issue   Scott Wood
    • [U-Boot] [PATCH v2] nand: Fix cache and memory inconsistent issue   Stefan Roese
      • [U-Boot] [PATCH v2] nand: Fix cache and memory inconsistent issue   Liu Dave
  • [U-Boot] Pull requst u-boot-mpc86xx   Jon Loeliger
    • [U-Boot] Pull requst u-boot-mpc86xx   Wolfgang Denk
  • [U-Boot] [PATCH v2 2/2] XPedite5200 board support   Jon Loeliger
• [U-Boot] iPAQ 21x support (+PXA3xx NAND flash and MMC)   Adrian Filipi
  • [U-Boot] iPAQ 21x support (+PXA3xx NAND flash and MMC)   Oliver Ford
    • [U-Boot] iPAQ 21x support (+PXA3xx NAND flash and MMC)   Daniel Mack
• [U-Boot] [Fwd: Re: iPAQ 21x support (+PXA3xx NAND flash and MMC)]   Oliver Ford
  • [U-Boot] [PATCH] net: Fix TftpStart() ip:filename bug   Peter Tyser
  • [U-Boot] [PATCH v3 0/2] 85xx: Support for XPedite5200   Peter Tyser
    • [U-Boot] [PATCH v3 1/2] 85xx: Add PORDEVSR_PCI1 define   Peter Tyser
    • [U-Boot] [PATCH v3 2/2] XPedite5200 board support   Peter Tyser
    • [U-Boot] [PATCH v3 2/2] XPedite5200 board support   Jon Loeliger
    • [U-Boot] [PATCH v3 2/2] XPedite5200 board support   Peter Tyser
    • [U-Boot] [PATCH v3 2/2] XPedite5200 board support   Jon Loeliger
    • [U-Boot] Problem in Optimizing the Boot Loader in Start.s of MPC85xx   Vignesh Kumar B
    • [U-Boot] Problem in Optimizing the Boot Loader in Start.s of MPC85xx   Scott Wood
    • [U-Boot] [PATCH v3 1/2] 85xx: Add PORDEVSR_PCI1 define   Andy Fleming
    • [U-Boot] [PATCH] Remove unused CONFIG_ADDR_STREAMING defines   Peter Tyser
    • [U-Boot] [PATCH v2] Remove unused CONFIG_ADDR_STREAMING defines   Peter Tyser
    • [U-Boot] [PATCH v2] Remove unused CONFIG_ADDR_STREAMING defines   Wolfgang Denk
  • [U-Boot] [PATCH v2 0/2] net: Additional IP fragmentation check   Peter Tyser
    • [U-Boot] [PATCH v2 1/2] net: Define IP flag field values   Peter Tyser
    • [U-Boot] [PATCH v2 2/2] net: Add additional IP fragmentation check   Peter Tyser
    • [U-Boot] [PATCH v2 0/2] net: Additional IP fragmentation check   Ben Warren
      • [U-Boot] [PATCH v2] net: Fix TftpStart() ip:filename bug   Peter Tyser
      • [U-Boot] [PATCH v2] net: Fix TftpStart() ip:filename bug   Ben Warren
• [U-Boot] pci booting 460ex seems to hang at tlb entries   Ayman M. El-Khashab
  • [U-Boot] Problem building fw_printenv un u-boot 1.3.4   Pink Boy
    • [U-Boot] Problem building fw_printenv un u-boot 1.3.4   Pink Boy
      • [U-Boot] Problem building fw_printenv un u-boot 1.3.4   Wolfgang Denk
      • [U-Boot] Problem building fw_printenv un u-boot 1.3.4   Pink Boy
      • [U-Boot] [PATCH] lib_ppc: rework the flush_cache   Dave Liu
      • [U-Boot] [PATCH] lib_ppc: rework the flush_cache   Scott Wood
      • [U-Boot] [PATCH] lib_ppc: rework the flush_cache   Liu Dave
      • [U-Boot] [PATCH] lib_ppc: rework the flush_cache   Wolfgang Denk
      • [U-Boot] [PATCH v3] nand: Fix cache and memory inconsistent issue   Dave Liu
      • [U-Boot] [PATCH v3] nand: Fix cache and memory inconsistent issue   Stefan Roese
      • [U-Boot] [PATCH v3] nand: Fix cache and memory inconsistent issue   Scott Wood
    • [U-Boot] General Dentists Listing for the United States   Rucker ghost
      • [U-Boot] [PATCH] r2dplus/lowlevel_init: coding style fix   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH] r2dplus/lowlevel_init: coding style fix   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH] Added support for the Guntermann & Drunck PowerPC 440 EP/GR ETX module.   Matthias Fuchs
    • [U-Boot] [PATCH] Added support for the Guntermann & Drunck PowerPC 440 EP/GR ETX module.   Jon Loeliger
• [U-Boot] NAND only (no NOR)   Norbert van Bolhuis
  • [U-Boot] NAND only (no NOR)   Alessandro Rubini
  • [U-Boot] NAND only (no NOR)   Sean MacLennan
    • [U-Boot] NAND only (no NOR)   Stefan Roese
      • [U-Boot] NAND only (no NOR)   Sean MacLennan
      • [U-Boot] NAND only (no NOR)   Trent Piepho
      • [U-Boot] NAND only (no NOR)   Leon Woestenberg
      • [U-Boot] [PATCH] net: tsec: Fix Marvell 88E1121R phy init   Anatolij Gustschin
      • [U-Boot] [PATCH] net: tsec: Fix Marvell 88E1121R phy init   Andy Fleming
      • [U-Boot] [PATCH] net: tsec: Fix Marvell 88E1121R phy init   Ben Warren
• [U-Boot] Does u-boot support custom binaries?   arun c
  • [U-Boot] Does u-boot support custom binaries?   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH v2] UBI: Enable re-initializing of the "ubi part" command   Stefan Roese
    • [U-Boot] [PATCH] OneNAND: Additional sync with 2.6.27   Stefan Roese
    • [U-Boot] [PATCH] OneNAND: Additional sync with 2.6.27   Scott Wood
    • [U-Boot] [PATCH] UBI: Fix size parsing in "ubi create"   Stefan Roese
• [U-Boot] LXT971 Ethernet problem   tomydevasia
  • [U-Boot] LXT971 Ethernet problem   Wolfgang Denk
• [U-Boot] quick easy question (hopefully)   Jim Don
• [U-Boot] LXT971 Ethernet problem   Wolfgang Denk
  • [U-Boot] [PATCH] fix some coding style violations.   Ilko Iliev
  • [U-Boot] [PATCH] fix some coding style violations.   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] mtd/dataflash.c: fix a problem with the last partition   Ilko Iliev
  • [U-Boot] [PATCH] mtd/dataflash.c: fix a problem with the last partition   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] net: Fix download command parsing   Peter Tyser
  • [U-Boot] [PATCH] net: Fix download command parsing   Ben Warren
  • [U-Boot] [PATCH] OneNAND: Add missing mtd info struct before calling onenand_erase()   Scott Wood
    • [U-Boot] [PATCH 1/2] 85xx: seperate PIXIS virtual from physical address   Kumar Gala
    • [U-Boot] [PATCH 1/2] 85xx: seperate PIXIS virtual from physical address   Jon Loeliger
    • [U-Boot] [PATCH 1/2] 85xx: seperate PIXIS virtual from physical address   Kumar Gala
    • [U-Boot] [PATCH 1/2] 85xx: seperate PIXIS virtual from physical address   Becky Bruce
    • [U-Boot] [PATCH 2/2] 85xx: seperate FLASH BASE virtual from physical address   Kumar Gala
    • [U-Boot] [PATCH] AT91: remove non supported board AT91RM9200DF macro   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH] usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH] usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH] usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable   Remy Bohmer
    • [U-Boot] [PATCH] at91rm9200dk: Fix typo   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] AT91 Pull request   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] AT91 Pull request   Wolfgang Denk
• [U-Boot] PHY lib   Andy Fleming
  • [U-Boot] [PATCH 1/5] 85xx: Convert CONFIG_SYS_{PCI*, RIO*}_MEM_BASE to _MEM_BUS for FSL boards   Kumar Gala
  • [U-Boot] [PATCH 2/5] 85xx: Convert CONFIG_SYS_PCI*_IO_BASE to _IO_BUS for FSL boards   Kumar Gala
  • [U-Boot] [PATCH 3/5] 85xx: Use CONFIG_SYS_{PCI*, RIO*}_MEM_PHYS for physical address on FSL boards   Kumar Gala
  • [U-Boot] [PATCH 4/5] 85xx: Introduce CONFIG_SYS_PCI*_MEM_VIRT for FSL boards   Kumar Gala
  • [U-Boot] [PATCH 5/5] 85xx: Introduce CONFIG_SYS_PCI*_IO_VIRT for FSL boards   Kumar Gala
• [U-Boot] u-boot for ixp425   Leon Woestenberg
  • [U-Boot] u-boot for ixp425   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Installing Linux kernel, nothing to execute in RAM...   Kim Phillips
  • [U-Boot] Installing Linux kernel, nothing to execute in RAM...   Simon Boman
• [U-Boot] [PATCH] net/net.c: correct timeout function   Daniel Mack
  • [U-Boot] [PATCH] net/net.c: correct timeout function   Ben Warren
    • [U-Boot] [PATCH] net/net.c: correct timeout function   Daniel Mack
      • [U-Boot] [PATCH] net/net.c: correct timeout function   Ben Warren
• [U-Boot] [PATCH] PXA3xx: fix CKEN[AB]   Daniel Mack
• [U-Boot] [PATCH] net/net.c: correct timeout function   Daniel Mack
  • [U-Boot] [PATCH] net/net.c: correct timeout function   Ben Warren
    • [U-Boot] [PATCH] net/net.c: add get_timer_ms()   Daniel Mack
      • [U-Boot] [PATCH] net/net.c: add get_timer_ms()   Wolfgang Denk
      • [U-Boot] [PATCH] net/net.c: add get_timer_ms()   Daniel Mack
      • [U-Boot] [PATCH] net/net.c: add get_timer_ms()   Wolfgang Denk
      • [U-Boot] [PATCH] net/net.c: add get_timer_ms()   Daniel Mack
      • [U-Boot] [PATCH] net/net.c: add get_timer_ms()   Wolfgang Denk
      • [U-Boot] [PATCH] net/net.c: add get_timer_ms()   Daniel Mack
    • [U-Boot] [PATCH] net/net.c: correct timeout function   Wolfgang Denk
      • [U-Boot] [PATCH] net/net.c: correct timeout function   Ben Warren
• [U-Boot] [PATCH] ne2000: take MAC address from config if available   Daniel Mack
  • [U-Boot] [PATCH] ne2000: take MAC address from config if available   Wolfgang Denk
    • [U-Boot] [PATCH] ne2000: take MAC address from config if available   Daniel Mack
• [U-Boot] [PATCH] bugfix for i.mx31 CCM_UPCTL reg   Maxim Artamonov
  • [U-Boot] [PATCH] bugfix for i.mx31 CCM_UPCTL reg   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Is arm-2008-11-24.iso the right image to compile U Boot for ARM ?   Diptopal Basu
  • [U-Boot] Is arm-2008-11-24.iso the right image to compile U Boot for ARM ?   Wolfgang Denk
• [U-Boot] how compilor know where .text section starts from?   hank.peng
  • [U-Boot] how compilor know where .text section starts from?   Wolfgang Denk
    • [U-Boot] how compilor know where .text section starts from?   hank peng
      • [U-Boot] how compilor know where .text section starts from?   chen gong
• [U-Boot] 短信群发为企业带来变革 615   龙生
  • [U-Boot] [PATCH v2] tools/mkimage: ignore trailing garbage   Peter Korsgaard
  • [U-Boot] [PATCH v2] tools/mkimage: use lseek rather than fstat for file size for -l option   Peter Korsgaard
  • [U-Boot] [PATCH v2] tools/mkimage: use lseek rather than fstat for file size for -l option   Wolfgang Denk
  • [U-Boot] [PATCH v2] tools/mkimage: use lseek rather than fstat for file size for -l option   Peter Korsgaard
  • [U-Boot] [PATCH v2] tools/mkimage: ignore trailing garbage   Wolfgang Denk
  • [U-Boot] [PATCH] Set IVPR to kenrel entry point in second core boot page   Haiying Wang
  • [U-Boot] [PATCH] Set IVPR to kenrel entry point in second core boot page   Kumar Gala
  • [U-Boot] 460EX PCI Boot SUCCESS and question   Ayman M. El-Khashab
• [U-Boot] Dear netexpress.net Email Owner   Email Owner
• [U-Boot] [PATCH] lib_ppc: rework the flush_cache   Scott Wood
  • [U-Boot] [PATCH] lib_ppc: rework the flush_cache   Liu Dave
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Timur Tabi
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Wolfgang Denk
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   ksi at koi8.net
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Timur Tabi
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   ksi at koi8.net
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Timur Tabi
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   ksi at koi8.net
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Timur Tabi
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   ksi at koi8.net
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Jerry Van Baren
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Wolfgang Denk
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   ksi at koi8.net
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Wolfgang Denk
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Timur Tabi
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   ksi at koi8.net
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Wolfgang Denk
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   Scott Wood
    • [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions   ksi at koi8.net
  • [U-Boot] Pull request: nand flash   Scott Wood
    • [U-Boot] Pull request: nand flash   Wolfgang Denk
      • [U-Boot] PCIe based SATA card?   Kumar Gala
      • [U-Boot] PCIe based SATA card?   Ayman El-Khashab
• [U-Boot] What is NetState?   Timur Tabi
  • [U-Boot] What is NetState?   Ben Warren
    • [U-Boot] [PATCH 1/5] mpc8xxx: LCRR[CLKDIV] is sometimes five bits   Trent Piepho
    • [U-Boot] [PATCH 2/5] mpc8568: Double local bus clock divider   Trent Piepho
    • [U-Boot] [PATCH 3/5] mpc86xx: Double local bus clock divider   Trent Piepho
    • [U-Boot] [PATCH 4/5] mpc8[56]xx: Put localbus clock in sysinfo and gd   Trent Piepho
    • [U-Boot] [PATCH 5/5] mpc8[56]xx: Put localbus clock in device tree   Trent Piepho
• [U-Boot] [PATCH] sh: sh7763rdp: Update sh7763rdp config   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH] sbc8641d: Fix PCI mapping concepts   Becky Bruce
  • [U-Boot] [PATCH] mpc8610hpcd: Fix PCI mapping concepts   Becky Bruce
  • [U-Boot] [PATCH 00/11] Allow PCI bus address, PA, and VA to differ   Becky Bruce
  • [U-Boot] [PATCH 01/11] powerpc: fix io.h build warning with CONFIG_PHYS_64BIT   Becky Bruce
  • [U-Boot] [PATCH 01/11] powerpc: fix io.h build warning with CONFIG_PHYS_64BIT   Wolfgang Denk
  • [U-Boot] [PATCH 01/11] powerpc: fix io.h build warning with CONFIG_PHYS_64BIT   Wolfgang Denk
  • [U-Boot] [PATCH 02/11] mpc8641hpcn: Set up outbound pci windows before inbound   Becky Bruce
  • [U-Boot] [PATCH 03/11] drivers/pci: Create pci_map_bar function   Becky Bruce
  • [U-Boot] [PATCH 04/11] powerpc: Move duplicated BAT defines to mmu.h   Becky Bruce
  • [U-Boot] [PATCH 05/11] lib_generic/addr_map: Change size to phys_size_t from ulong   Becky Bruce
  • [U-Boot] [PATCH 05/11] lib_generic/addr_map: Change size to phys_size_t from ulong   Kumar Gala
  • [U-Boot] [PATCH 06/11] mpc86xx: Add support to populate addr map based on BATs   Becky Bruce
  • [U-Boot] [PATCH 07/11] flash/cfi_flash: Use virtual sector start address, not phys   Becky Bruce
  • [U-Boot] [PATCH 08/11] mpc8641hpcn: Clean up PCI mapping concepts   Becky Bruce
  • [U-Boot] [PATCH 09/11] MPC8641HPCN: Enable CONFIG_ADDR_MAP   Becky Bruce
  • [U-Boot] [PATCH 10/11] drivers/block/ahci: Fix pci mapping bug   Becky Bruce
  • [U-Boot] [PATCH 11/11] mpc8641hpcn: Change PCI MEM pci bus address   Becky Bruce
• [U-Boot] u-boot.lds i686-pc-linux-gnu-ld section .start16 overlaps section .text   LanceZ
  • [U-Boot] u-boot.lds i686-pc-linux-gnu-ld section .start16 overlapssection .text   Vignesh Kumar B
  • [U-Boot] u-boot.lds i686-pc-linux-gnu-ld section .start16 overlapssection .text   Lance Zhang
  • [U-Boot] u-boot.lds i686-pc-linux-gnu-ld section .start16 overlapssection .text   Graeme Russ
  • [U-Boot] u-boot.lds i686-pc-linux-gnu-ld section .start16 overlapssection .text   Lance Zhang
  • [U-Boot] u-boot.lds i686-pc-linux-gnu-ld section .start16 overlapssection .text   Graeme Russ
  • [U-Boot] u-boot.lds i686-pc-linux-gnu-ld section .start16 overlapssection .text   LanceZ
• [U-Boot] how do I find out the memory map for my port for at91rm9200dk   Diptopal Basu
  • [U-Boot] how do I find out the memory map for my port forat91rm9200dk   Vignesh Kumar B
• [U-Boot] how do I find out the memory map for my port for at91rm9200dk   Diptopal Basu
• [U-Boot] [PATCH] Coldfire: XL Bus minor fixes   arun c
• [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   stefan.althoefer at web.de
  • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Jerry Van Baren
  • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Ben Warren
  • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Jerry Van Baren
    • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Stefan Althoefer
      • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Wolfgang Denk
      • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Jerry Van Baren
      • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Ben Warren
      • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Wolfgang Denk
      • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Stefan Althoefer
      • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Wolfgang Denk
      • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Stefan Althoefer
      • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Wolfgang Denk
      • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Stefan Althoefer
      • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Wolfgang Denk
      • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Stefan Althoefer
      • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Jerry Van Baren
      • [U-Boot] [PATCH V3] cmd_bdinfo: move implementation to arch instead of common   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH V4] cmd_bdinfo: move implementation to arch instead of common   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH V4] cmd_bdinfo: move implementation to arch instead of common   Joakim Tjernlund
• [U-Boot] Chiropractors Contact List and many more from other medical professions   mt Bunch
  • [U-Boot] [PATCH V3] Fix FIT and fdt blob support to have CONFIG_OF_LIBFDT and CONFIG_FIT independant   Kumar Gala
  • [U-Boot] pci_hose_{bus_to_phys,phys_to_bus} and inbound memory   Kumar Gala
  • [U-Boot] pci_hose_{bus_to_phys,phys_to_bus} and inbound memory   Kumar Gala
  • [U-Boot] pci_hose_{bus_to_phys,phys_to_bus} and inbound memory   Wolfgang Denk
  • [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
  • [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Stefan Althöfer
  • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Ben Warren
  • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Wolfgang Denk
    • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Stefan Althoefer
      • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Ben Warren
      • [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1   Wolfgang Denk
• [U-Boot] Pull Request: u-boot-usb.git   Remy Bohmer
  • [U-Boot] Pull Request: u-boot-usb.git   Wolfgang Denk
• [U-Boot] [PATCH 1/5] fsl-ddr: update the bit mask for DDR3 controller   Andy Fleming
• [U-Boot] [PATCH] Removed unused CONFIG_L1_INIT_RAM symbol.   Andy Fleming
• [U-Boot] [PATCH] fsl ddr skip interleaving if not supported.   Andy Fleming
• [U-Boot] [PATCH] 85xx: socrates: fix DDR SDRAM tlb entry configuration   Andy Fleming
• [U-Boot] [PATCH] Add README file for MPC8572DS board   Andy Fleming
• [U-Boot] [PATCH] 85xx: Add CPU 2 errata workaround to all 8548 boards   Andy Fleming
• [U-Boot] [PATCH 4/5] fsl-ddr: use the 1T timing as default configuration   Andy Fleming
• [U-Boot] [PATCH 5/5] 85xx: enable the auto self refresh for wake up ARP   Andy Fleming
• [U-Boot] [PATCH 2/5] fsl-ddr: clean up the ddr code for DDR3 controller   Andy Fleming
• [U-Boot] [PATCH 1/5] fsl-ddr: update the bit mask for DDR3 controller   Andy Fleming
• [U-Boot] [PATCH 3/5] fsl-ddr: make the self refresh idle threshold configurable   Andy Fleming
• [U-Boot] [PATCH] drivers/fsl_pci_init: Fix inbound window mapping bug   Andy Fleming
• [U-Boot] [PATCH] ARM: Allow cross endian linux boot Part 1/1   Stefan Althoefer
  • [U-Boot] [PATCH] ARM: Allow cross endian linux boot Part 1/1   Wolfgang Denk
• [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1   Stefan Althoefer
  • [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1   Stefan Althoefer
      • [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1   michael
      • [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1   michael
      • [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1   Stefan Althoefer
    • [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1   michael
• [U-Boot] Part 1/0   Stefan Althoefer
  • [U-Boot] Part 1/0   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] IDE: Improving speed on reading data Part 1/1   Stefan Althoefer
  • [U-Boot] [PATCH] IDE: Improving speed on reading data Part 1/1   Wolfgang Denk
    • [U-Boot] [PATCH] IDE: Improving speed on reading data Part 1/1   Stefan Althoefer
• [U-Boot] [PATCH] IXP425: make cmd_go handle caches correctly Part 1/1   Stefan Althoefer
  • [U-Boot] [PATCH] IXP425: make cmd_go handle caches correctly Part 1/1   Wolfgang Denk
    • [U-Boot] [PATCH] IXP425: make cmd_go handle caches correctly Part 1/1   Stefan Althoefer
• [U-Boot] [PATCH] IXP425: Improving print_cpuinfo code Part 1/1   Stefan Althoefer
  • [U-Boot] [PATCH] IXP425: Improving print_cpuinfo code Part 1/1   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH] IXP425: Improving print_cpuinfo code Part 1/1   Stefan Althoefer
      • [U-Boot] [PATCH] IXP425: Improving print_cpuinfo code Part 1/1   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] IXP425: Fixing PCI access Part 1/1   Stefan Althoefer
  • [U-Boot] [PATCH] IXP425: Fixing PCI access Part 1/1   Stefan Althoefer
    • [U-Boot] [PATCH] IXP425: Fixing PCI access Part 1/1   Wolfgang Denk
  • [U-Boot] [PATCH] IXP425: Fixing PCI access Part 1/1   Wolfgang Denk
    • [U-Boot] [PATCH] IXP425: Fixing PCI access Part 1/1   Stefan Althoefer
• [U-Boot] [PATCH] IXP425: Changing serial port initialization sequence Part 1/1   Stefan Althoefer
• [U-Boot] [PATCH] IXP425: Fixing timer code Part 1/1   Stefan Althoefer
  • [U-Boot] [PATCH] IXP425: Fixing timer code Part 1/1   Wolfgang Denk
    • [U-Boot] [PATCH] IXP425: Fixing timer code Part 1/1   Stefan Althoefer
    • [U-Boot] [PATCH] IXP425: Fixing timer code Part 1/1   Stefan Althoefer
• [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2   Stefan Althoefer
  • [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2   Anatolij Gustschin
    • [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2   Stefan Althoefer
    • [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2   Wolfgang Denk
      • [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2   ksi at koi8.net
      • [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2   Wolfgang Denk
      • [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2   ksi at koi8.net
      • [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2   Wolfgang Denk
      • [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2   ksi at koi8.net
      • [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2   Stefan Althoefer
      • [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2   Anatolij Gustschin
• [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 2/2   Stefan Althoefer
  • [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 2/2   Anatolij Gustschin
• [U-Boot] [PATCH] IXP425: Add new IXP425 board emPC-A400 Part 1/2   Stefan Althoefer
• [U-Boot] [PATCH] IXP425: Add new IXP425 board emPC-A400 Part 2/2   Stefan Althoefer
• [U-Boot] [patch] Improve progres bar for booting from USB stick.   Remy Bohmer
  • [U-Boot] [patch] Improve progres bar for booting from USB stick.   Wolfgang Denk
• [U-Boot] [patch] make hello world example work for at91sam9261ek and make readme clearer about this   Remy Bohmer
  • [U-Boot] [patch] make hello world example work for at91sam9261ek and make readme clearer about this   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [patch] make hello world example work for at91sam9261ek and make readme clearer about this   Remy Bohmer
      • [U-Boot] [patch] make hello world example work for at91sam9261ek and make readme clearer about this   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [patch] make hello world example work for at91sam9261ek and make readme clearer about this   Wolfgang Denk
  • [U-Boot] [patch] make hello world example work for at91sam9261ek and make readme clearer about this   Wolfgang Denk
• [U-Boot] [patch] Remove redundant armv4 flag from arm926ejs compile flags   Remy Bohmer
  • [U-Boot] [patch] Remove redundant armv4 flag from arm926ejs compile flags   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch] Print image address the bootm command assumed when it complains about wrong image format.   Remy Bohmer
  • [U-Boot] [patch] Print image address the bootm command assumed when it complains about wrong image format.   Wolfgang Denk
    • [U-Boot] [PATCH] Add secondary CPUs processor frequency for e500 core   Haiying Wang
• [U-Boot] Is arm-2008-11-24.iso the right image to compile U Boot for ARM ?   Diptopal Basu
  • [U-Boot] [PATCH] r2dplus fix register access   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] r2dplus fix register access   Nobuhiro Iwamatsu
• [U-Boot] Pull request - net   Ben Warren
  • [U-Boot] Pull request - net   Wolfgang Denk
    • [U-Boot] [PATCH v1] lib_ppc: rework the flush_cache   Dave Liu
    • [U-Boot] [PATCH v1] lib_ppc: rework the flush_cache   Wolfgang Denk
• [U-Boot] u-boot-2008.10 nand boot not working for SMDK6400   Alagan S
  • [U-Boot] u-boot-2008.10 nand boot not working for SMDK6400   Guennadi Liakhovetski
• [U-Boot] [PATCH] V2 NAND_SPL support for phycore imx31   Maxim Artamonov
  • [U-Boot] [PATCH] V2 NAND_SPL support for phycore imx31   Scott Wood
  • [U-Boot] [PATCH v5 0/3]Support for XPedite5370 and misc GPIO   Peter Tyser
    • [U-Boot] [PATCH v5 1/3] Add support for PCA953x I2C gpio devices   Peter Tyser
    • [U-Boot] [PATCH v5 2/3] Add support for Maxim's DS4510 I2C device   Peter Tyser
    • [U-Boot] [PATCH v5 3/3] XPedite5370 board support   Peter Tyser
    • [U-Boot] [PATCH v4 3/3] XPedite5370 board support   Andy Fleming
    • [U-Boot] [PATCH v4 3/3] XPedite5370 board support   Peter Tyser
    • [U-Boot] [PATCH v4 2/3] Add support for Maxim's DS4510 I2C device   Wolfgang Denk
    • [U-Boot] [PATCH v4 2/3] Add support for Maxim's DS4510 I2C device   Peter Tyser
• [U-Boot] [PATCH v2] Add secondary CPUs processor frequency for e500 core   Haiying Wang
• [U-Boot] [ARM] How up-to-date is http://www.denx.de/wiki/U-Boot/PatchStatus ?   Thomas De Schampheleire
  • [U-Boot] [ARM] How up-to-date is http://www.denx.de/wiki/U-Boot/PatchStatus ?   Wolfgang Denk
    • [U-Boot] [ARM] How up-to-date is http://www.denx.de/wiki/U-Boot/PatchStatus ?   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] FPGA: move fpga drivers to drivers/fpga   Wolfgang Denk
• [U-Boot] [PATCH] ignore .gdb_history files   Wolfgang Denk
• [U-Boot] [PATCH] cmd_elf: CONFIG_ELF_SIMPLE_LOAD: load ELFs according to PHDRs   Wolfgang Denk
  • [U-Boot] [PATCH] cmd_elf: CONFIG_ELF_SIMPLE_LOAD: load ELFs according to PHDRs   Mike Frysinger
    • [U-Boot] [PATCH] cmd_elf: CONFIG_ELF_SIMPLE_LOAD: load ELFs according to PHDRs   Wolfgang Denk
• [U-Boot] [PATCH]: FFS/UFS filesystems support   Wolfgang Denk
• [U-Boot] [PATCH] lwmon, tqm8xx: Fix build errors   Wolfgang Denk
• [U-Boot] [PATCH v5] Update U-Boot's build timestamp on every compile   Wolfgang Denk
• [U-Boot] We have data for Veterinarians, Massage Therapists, Dentists etc..   Hastings U Gail
  • [U-Boot] [PATCH-OMAP3] OMAP3: Check for MMC card   Dirk Behme
  • [U-Boot] [PATCH-OMAP3] OMAP3: Check for MMC card   Jason Kridner
  • [U-Boot] [PATCH-OMAP3] OMAP3: Check for MMC card   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH-OMAP3] OMAP3: Check for MMC card   Dirk Behme
  • [U-Boot] [PATCH-OMAP3] OMAP3: Enable command parser and add boot scripting   Dirk Behme
  • [U-Boot] [PATCH-OMAP3] OMAP3: Enable command parser and add boot scripting   Jason Kridner
  • [U-Boot] [PATCH-OMAP3] OMAP3: Enable command parser and add boot scripting   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] nand: move board_nand_init to nand.h   Mike Frysinger
  • [U-Boot] [PATCH] nand: move board_nand_init to nand.h   Scott Wood
• [U-Boot] [PATCH] at91: Choose environment variables location within make config target   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] AT91 Pull request   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] AT91 Pull request   Wolfgang Denk
• [U-Boot] [PATCH] add support for Toradex Colibri PXA300 module   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] add support for Toradex Colibri PXA300 module   Daniel Mack
• [U-Boot] [PATCH-OMAP3 2/2] OMAP3: Convert register access to structure style, part #2   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3 2/2] OMAP3: Add Pandora configuration   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-OMAP3 1/2] OMAP3: Add Pandora board files   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2 1/1] IXP425: Fixing PCI access   Stefan Althoefer
  • [U-Boot] [PATCH V2 Inc1] IXP425: Fixing PCI access   Stefan Althoefer
  • [U-Boot] [PATCH V2 1/1] IXP425: Fixing PCI access   Wolfgang Denk
• [U-Boot] [PATCH v5] Update U-Boot's build timestamp on every compile   Wolfgang Denk
• [U-Boot] [PATCH] lcd: Let the board code show board-specific info cleanup   Wolfgang Denk
• [U-Boot] [PATCH 1/4]v2: Document CONFIG_SYS parameters for vxworks   Wolfgang Denk
• [U-Boot] [PATCH 3/4]v2: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters   Wolfgang Denk
• [U-Boot] [PATCH 4/4]v2: Use new CONFIG_SYS_VXWORKS parameters for Netstal boards   Wolfgang Denk
  • [U-Boot] [PATCH 00/15] i386 Modifications and new board (eNET)   Graeme Russ
  • [U-Boot] [PATCH 01/15] Added initial eNET board support   Graeme Russ
  • [U-Boot] [PATCH 02/15] Renamed cpu/i386/reset.S to resetvec.S   Graeme Russ
  • [U-Boot] [PATCH 03/15] Updated eNET link script for reset -> resetvec section rename   Graeme Russ
  • [U-Boot] [PATCH 04/15] Moved sc520 specific code into new cpu/i386/sc520 folder   Graeme Russ
  • [U-Boot] [PATCH 03/15] Updated eNET link script for reset -> resetvec section rename   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 05/15] Moved definition of set_vector() to new header file   Graeme Russ
  • [U-Boot] [PATCH 06/15] Moved generic (triple fault) reset code   Graeme Russ
  • [U-Boot] [PATCH 07/15] Added MMCR reset functionality   Graeme Russ
  • [U-Boot] [PATCH 08/15] Remove #ifdef CONFIG_SC520 in source code   Graeme Russ
  • [U-Boot] [PATCH 09/15] Removed all references to CONFIG_SYS_RESET_GENERIC   Graeme Russ
  • [U-Boot] [PATCH 08/15] Remove #ifdef CONFIG_SC520 in source code   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 10/15] Renamed SC520 configuration options   Graeme Russ
  • [U-Boot] [PATCH 11/15] Removed #ifdef CONFIG_SYS_SC520   Graeme Russ
  • [U-Boot] [PATCH 11/15] Removed #ifdef CONFIG_SYS_SC520   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 12/15] Fixed CONFIG_SYS_SC520_RESET for eNET board   Graeme Russ
  • [U-Boot] [PATCH 12/15] Fixed CONFIG_SYS_SC520_RESET for eNET board   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 12/15] Fixed CONFIG_SYS_SC520_RESET for eNET board   Graeme Russ
  • [U-Boot] [PATCH 12/15] Fixed CONFIG_SYS_SC520_RESET for eNET board   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 12/15] Fixed CONFIG_SYS_SC520_RESET for eNET board   Peter Tyser
  • [U-Boot] [PATCH 13/15] Moved ali512x.h from include/asm-i386/ic/ to /include   Graeme Russ
  • [U-Boot] [PATCH 14/15] Added MMCR initialisation to real mode eNET board initialisation   Graeme Russ
  • [U-Boot] [PATCH 15/15] Seperated exception handling functionality out of interrupts.c   Graeme Russ
• [U-Boot] [PATCH] strings: use puts() rather than printf()   Wolfgang Denk
• [U-Boot] [PATCH 1/2 V3] IOMUX: Add console multiplexing support.   Wolfgang Denk
• [U-Boot] [PATCH] common/cmd_ide.c: Corrected endian order printing for compact flash serial number.   Wolfgang Denk
• [U-Boot] [PATCH] drivers/bios_emulator: Move conditional compilation to Makefile   Wolfgang Denk
• [U-Boot] [PATCH] keymile add the common parts of the HDLC driver   Wolfgang Denk
• [U-Boot] [PATCH] mgcoge add the board-specific part of the HDLC driver   Wolfgang Denk
• [U-Boot] [PATCH] mgsuvd add the board-specific part of the HDLC driver   Wolfgang Denk
• [U-Boot] [PATCH] SPARC: Fixed compiler error introduced by commit c160a9544743e80e8889edb2275538e7764ce334   Wolfgang Denk
• [U-Boot] [PATCH] usbtty/omap: update to current API   Wolfgang Denk
  • [U-Boot] [PATCH V2] usbtty/omap: update to current API   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH V2] usbtty/omap: update to current API   Remy Bohmer
  • [U-Boot] [PATCH V2] usbtty/omap: update to current API   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH V2] usbtty/omap: update to current API   Remy Bohmer
  • [U-Boot] [PATCH V2] usbtty/omap: update to current API   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] qemu_mips: update doc to generate and to use qemu flash, ide file   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 1/1] qemu_mips: update doc to generate and to use qemu flash, ide file   Shinya Kuribayashi
    • [U-Boot] [PATCH 1/1] qemu_mips: update doc to generate and to use qemu flash, ide file   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 1/2] qemu_mips: move env storage just after u-boot   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 2/2] qemu_mips: update doc to use all disk and boot linux kernel   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 2/2] qemu_mips: update doc to use all disk and boot linux kernel   Shinya Kuribayashi
• [U-Boot] [patch 2/2] Cleanup patch Fat on non standard sector sizedevices   Remy Bohmer
• [U-Boot] boardname xxx-yyy produce error   Willi Schulte
  • [U-Boot] boardname xxx-yyy produce error   Wolfgang Denk
    • [U-Boot] boardname xxx-yyy produce error   Willi Schulte
      • [U-Boot] boardname xxx-yyy produce error   Wolfgang Denk
  • [PATCH] common: nvedit to protect additional ethernet addresses   Stefan Althoefer
• [U-Boot] [Bug Report] USB: descriptor handling   Stefan Althoefer
  • [U-Boot] [Bug Report] USB: descriptor handling   Remy Bohmer
  • [U-Boot] [Bug Report] USB: descriptor handling   Stefan Althoefer
    • [U-Boot] [PATCH] POST Make: fix the sub-dir dependencies missing.   Wolfgang Denk
    • [U-Boot] [PATCH] POST Make: fix the sub-dir dependencies missing.   Wolfgang Denk
• [U-Boot] Is arm-2008-11-24.iso the right image to compile U Boot for ARM ?   Diptopal Basu
  • [U-Boot] Is arm-2008-11-24.iso the right image to compile U Boot for ARM ?   Wolfgang Denk
    • [U-Boot] [PATCH] Fixed off-by-one errors in lib_m68k/interrupts.c   Graeme Russ
• [U-Boot] Is arm-2008-11-24.iso the right image to compile U Boot for ARM ?   Diptopal Basu
• [U-Boot] gumstix and uboot   Jim Don
  • [U-Boot] gumstix and uboot   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Writing own Standalone programs   Piyush Shah
  • [U-Boot] Writing own Standalone programs   Wolfgang Denk
• [U-Boot] LXT971 ethernet driver   tomydevasia
• [U-Boot] MPC8313RDB evaluation platform hangs on nand configured U-boot   RobertMMorgan at eaton.com
  • [U-Boot] [PATCH v2] ppc4xx: Add GDsys PowerPC 440 ETX board support.   Dirk Eibach
  • [U-Boot] [PATCH v2] ppc4xx: Add GDsys PowerPC 440 ETX board support.   Wolfgang Denk
  • [U-Boot] [PATCH] ppc4xx: Improve DDR autodetect   Dirk Eibach
  • [U-Boot] [PATCH] Added legacy flash ST Micro M29W040B   Niklaus Giger
  • [U-Boot] FSL DDR @ 83xx   Andre Schwarz
    • [U-Boot] FSL DDR @ 83xx   Jon Loeliger
    • [U-Boot] FSL DDR @ 83xx   Andre Schwarz
    • [U-Boot] FSL DDR @ 83xx   Kumar Gala
    • [U-Boot] FSL DDR @ 83xx   Andre Schwarz
    • [U-Boot] FSL DDR @ 83xx   Jon Loeliger
    • [U-Boot] FSL DDR @ 83xx   Jon Loeliger
    • [U-Boot] FSL DDR @ 83xx   Andre Schwarz
    • [U-Boot] FSL DDR @ 83xx   Jon Loeliger
    • [U-Boot] FSL DDR @ 83xx   Kim Phillips
      • [U-Boot] FSL DDR @ 83xx   Andre Schwarz
• [U-Boot] [PATCH 1/2]   Steven A. Falco
  • [U-Boot] [PATCH 1/2]   Ben Warren
• [U-Boot] [PATCH 2/2] Add SPI helpers to Sequoia   Steven A. Falco
  • [U-Boot] [PATCH 2/2] Add SPI helpers to Sequoia   Wolfgang Denk
• [U-Boot] [PATCH 1/2][RESEND] Add an SPI driver for PPC440EPx   Steven A. Falco
  • [U-Boot] [PATCH 1/2][RESEND] Add an SPI driver for PPC440EPx   Ben Warren
  • [U-Boot] [PATCH 1/2][RESEND] Add an SPI driver for PPC440EPx   Stefan Roese
  • [U-Boot] [PATCH 1/2][RESEND] Add an SPI driver for PPC440EPx   Wolfgang Denk
• [U-Boot] [PATCH] OneNAND: Fix compiler warnings   Wolfgang Denk
  • [U-Boot] [PATCH] OneNAND: Fix compiler warnings   Kyungmin Park
    • [U-Boot] [PATCH] OneNAND: Fix compiler warnings   Stefan Roese
      • [U-Boot] [PATCH] OneNAND: Fix compiler warnings   Amit Kumar Sharma
      • [U-Boot] [PATCH] OneNAND: Fix compiler warnings   Stefan Roese
      • [U-Boot] [PATCH] OneNAND: Fix compiler warnings   Amit Kumar Sharma
      • [U-Boot] [PATCH] OneNAND: Fix compiler warnings   Scott Wood
      • [U-Boot] [PATCH] OneNAND: Fix compiler warnings   Wolfgang Denk
      • [U-Boot] [PATCH] OneNAND: Fix compiler warnings   Kyungmin Park
• [U-Boot] [PATCH v2] mgcoge make ether_scc.c work with CONFIG_NET_MULTI   Wolfgang Denk
  • [U-Boot] [PATCH v2] mgcoge make ether_scc.c work with CONFIG_NET_MULTI   Wolfgang Denk
  • [U-Boot] [PATCH v2] mgcoge make ether_scc.c work with CONFIG_NET_MULTI   Ben Warren
    • [U-Boot] [PATCH v2] mgcoge make ether_scc.c work with CONFIG_NET_MULTI   Gary Jennejohn
• [U-Boot] [PATCH v2 1/2] ppc4xx: Add 440EPx SPI driver   Steven A. Falco
  • [U-Boot] [PATCH v2 1/2] ppc4xx: Add 440EPx SPI driver   Stefan Roese
    • [U-Boot] [PATCH v2 1/2] ppc4xx: Add 440EPx SPI driver   Wolfgang Denk
      • [U-Boot] [PATCH v2 1/2] ppc4xx: Add 440EPx SPI driver   Ben Warren
      • [U-Boot] [PATCH v2 1/2] ppc4xx: Add 440EPx SPI driver   Stefan Roese
  • [U-Boot] [PATCH v2 1/2] ppc4xx: Add 440EPx SPI driver   Stefan Roese
• [U-Boot] [PATCH v2 2/2] ppc4xx: Add SPI helper routines for the 440EPX   Steven A. Falco
  • [U-Boot] [PATCH v2 2/2] ppc4xx: Add SPI helper routines for the 440EPX   Stefan Roese
• [U-Boot] TQM8xxL flash memory write problem   Thomas Maenner
  • [U-Boot] TQM8xxL flash memory write problem   Wolfgang Denk
    • [U-Boot] TQM8xxL flash memory write problem   Thomas Maenner
• [U-Boot] [PATCH] jffs2: rename devices_init () in common/jffs2.c   Wolfgang Denk
  • [U-Boot] [PATCH 1/1] Make FAT code comply to coding rules.   Remy Böhmer
  • [U-Boot] [PATCH 1/1] Make FAT code comply to coding rules.   Wolfgang Denk
  • [U-Boot] [PATCH 1/1] Make FAT code comply to coding rules.   Remy Bohmer
  • [U-Boot] [PATCH 1/1] Make FAT code comply to coding rules.   Wolfgang Denk
• [U-Boot] [Bug] ARM: early environment broken   Stefan Althoefer
• [U-Boot] bootlimit for arm? watchdog?   Wolfgang Denk
• [U-Boot] [PATCH] Use bash for default GNU Make shell application   Wolfgang Denk
• [U-Boot] [PATCH] Remove unneeded CONFIG_SHELL references   Wolfgang Denk
• [U-Boot] [PATCH] avr32/cmd_bdinfo: fix printf() format warnings   Wolfgang Denk
• [U-Boot] [PATCH] avr32/bootm: remove unused variable 'ret'   Wolfgang Denk
• [U-Boot] [PATCH] avr32/bootm: remove unused variable 'ret'   Wolfgang Denk
• [U-Boot] [PATCH 3/4]v2: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters   Wolfgang Denk
  • [U-Boot] [PATCH] vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23   Wolfgang Denk
  • [U-Boot] [PATCH] vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23   Niklaus Giger
  • [U-Boot] [PATCH] MAKEALL: Automatically use parallel builds   Wolfgang Denk
  • [U-Boot] [PATCH] MAKEALL: Automatically use parallel builds   Mike Frysinger
  • [U-Boot] [PATCH] MAKEALL: Automatically use parallel builds   Wolfgang Denk
• [U-Boot] [PATCH] Section name should be ".data" not "data"   Wolfgang Denk
• [U-Boot] [PPC4xx] Info about emac   Salvatore Lionetti
• [U-Boot] [PPC4xx] Info about emac   Salvatore Lionetti
  • [U-Boot] [PPC4xx] Info about emac   Ben Warren
• [U-Boot] [PATCH] sh: Update sh2/sh2a timer   Nobuhiro Iwamatsu
• [U-Boot] Two confusing questions about relocation of code on MPC8548CDS board   hank peng
• [U-Boot] Interrupts in standalone application   kishore choudhari
  • [U-Boot] Interrupts in standalone application   Wolfgang Denk
    • [U-Boot] [PATCH v3] ppc4xx: Add GDsys PowerPC 440 ETX board support.   Dirk Eibach
    • [U-Boot] [PATCH v3] ppc4xx: Add GDsys PowerPC 440 ETX board support.   Stefan Roese
    • [U-Boot] [PATCH v2] ppc4xx: Improve DDR autodetect   Dirk Eibach
    • [U-Boot] [PATCH v2] ppc4xx: Improve DDR autodetect   Stefan Roese
• [U-Boot] [ubi] Please pull git://www.denx.de/git/u-boot-ubi.git   Stefan Roese
  • [U-Boot] [ubi] Please pull git://www.denx.de/git/u-boot-ubi.git   Wolfgang Denk
    • [U-Boot] [PATCH v4] ppc4xx: Add GDsys PowerPC 440 ETX board support.   Dirk Eibach
    • [U-Boot] [PATCH v4] ppc4xx: Add GDsys PowerPC 440 ETX board support.   Stefan Roese
    • [U-Boot] [PATCH v3] ppc4xx: Improve DDR autodetect   Dirk Eibach
    • [U-Boot] [PATCH v5] ppc4xx: Add GDsys PowerPC 440 ETX board support.   Dirk Eibach
    • [U-Boot] [PATCH v5] ppc4xx: Add GDsys PowerPC 440 ETX board support.   Stefan Roese
    • [U-Boot] [PATCH v5] ppc4xx: Add GDsys PowerPC 440 ETX board support.   Eibach, Dirk
    • [U-Boot] [PATCH v5] ppc4xx: Add GDsys PowerPC 440 ETX board support.   Stefan Roese
  • [U-Boot] show_boot_progess @ ppc not working   Andre Schwarz
    • [U-Boot] show_boot_progess @ ppc not working   Heiko Schocher
      • [U-Boot] show_boot_progess @ ppc not working   Andre Schwarz
    • [U-Boot] show_boot_progess @ ppc not working   Heiko Schocher
      • [U-Boot] show_boot_progess @ ppc not working   Andre Schwarz
      • [U-Boot] show_boot_progess @ ppc not working   Graeme Russ
      • [U-Boot] show_boot_progess @ ppc not working   Andre Schwarz
      • [U-Boot] [PATCH v6] ppc4xx: Add GDsys PowerPC 440 ETX board support.   Dirk Eibach
• [U-Boot] Increase command line size   Paulo Flabiano Smorigo
  • [U-Boot] Increase command line size   Wolfgang Denk
    • [U-Boot] Increase command line size   Paulo Flabiano Smorigo
      • [U-Boot] Increase command line size   Wolfgang Denk
      • [U-Boot] Increase command line size   Paulo Flabiano Smorigo
• [U-Boot] [PATCH V2] qemu_mips: move env storage just after u-boot   Shinya Kuribayashi
• [U-Boot] Lost of data in board info before relocating U-Boot in SDRAM   Gregory Medwed
• [U-Boot] CPCI405 doesn't build anymore   Stefan Roese
  • [U-Boot] [PATCH] ppc4xx: Update TEXT_BASE for CPCI405 boards   Matthias Fuchs
    • [U-Boot] [PATCH] ppc4xx: Update TEXT_BASE for CPCI405 boards   Stefan Roese
    • [U-Boot] [PATCH V2] ppc4xx: Update TEXT_BASE for CPCI405 boards   Matthias Fuchs
• [U-Boot] alpr U-Boot image too big   Stefan Roese
  • [U-Boot] alpr U-Boot image too big   Pieter Voorthuijsen
    • [U-Boot] alpr U-Boot image too big   Stefan Roese
• [U-Boot] [PATCH v3 1/2] ppc4xx: Add PPC4xx SPI driver   Steven A. Falco
  • [U-Boot] [PATCH v3 1/2] ppc4xx: Add PPC4xx SPI driver   Wolfgang Denk
    • [U-Boot] [PATCH v3 1/2] ppc4xx: Add PPC4xx SPI driver   Stefan Roese
      • [U-Boot] [PATCH v3 1/2] ppc4xx: Add PPC4xx SPI driver   Wolfgang Denk
• [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia   Steven A. Falco
  • [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia   Wolfgang Denk
  • [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia   Ben Warren
    • [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia   Steven A. Falco
    • [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia   Wolfgang Denk
      • [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia   Steven A. Falco
      • [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia   Stefan Roese
      • [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia   Wolfgang Denk
      • [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia   Wolfgang Denk
      • [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia   Ben Warren
      • [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia   Steven A. Falco
      • [U-Boot] [PATCH] drivers/fsl_pci_init: Fix compile warning   Kumar Gala
      • [U-Boot] [PATCH] drivers/fsl_pci_init: Fix compile warning   Wolfgang Denk
• [U-Boot] mtd partitions   Carlos kescuin
  • [U-Boot] mtd partitions   Scott Wood
    • [U-Boot] [PATCH] video: fix FADS823 and RRvision compiling issues   Anatolij Gustschin
    • [U-Boot] [PATCH] video: fix FADS823 and RRvision compiling issues   Wolfgang Denk
• [U-Boot] Pull request: u-boot-video   Anatolij Gustschin
  • [U-Boot] Pull request: u-boot-video   Wolfgang Denk
    • [U-Boot] [PATCH] ppc4xx: Remove some features from ALPR to fit into 256k again   Stefan Roese
    • [U-Boot] [PATCH] ppc4xx: Remove some features from ALPR to fit into 256k again   Pieter Voorthuijsen
    • [U-Boot] [PATCH] ppc4xx: Remove some features from ALPR to fit into 256k again   Stefan Roese
  • [U-Boot] [PATCH] [ONENAND] Reduce OneNAND IPL code size v2   Scott Wood
    • [U-Boot] [PATCH] [ONENAND] Reduce OneNAND IPL code size v2   Kyungmin Park
      • [U-Boot] [PATCH] [ONENAND] Reduce OneNAND IPL code size v2   Scott Wood
  • [U-Boot] Pull request: u-boot-SUBREPO   Wolfgang Denk
• [U-Boot] mtd partitions (Carlos kescuin)   Tom Evans
  • [U-Boot] [PATCH] evb64260: fix "cast to pointer from integer of different size" warnings   Wolfgang Denk
• [U-Boot] Commit 9eb79bd8 breaks building for MBX860T board   Wolfgang Denk
  • [U-Boot] Commit 9eb79bd8 breaks building for MBX860T board   Ben Warren
• [U-Boot] [PATCH 1/6] jffs2: fix searching for latest version in jffs2_1pass_list_inodes()   Wolfgang Denk
• [U-Boot] [PATCH 2/6] jffs2: add sector_size field to part_info structure   Wolfgang Denk
• [U-Boot] [PATCH 3/6] jffs2: rewrite jffs2 scanning code based on Linux one   Wolfgang Denk
• [U-Boot] [PATCH 4/6] jffs2: add buffer to cache flash accesses   Wolfgang Denk
• [U-Boot] [PATCH 5/6] jffs2: summary support   Wolfgang Denk
• [U-Boot] [PATCH 6/6] jffs2: cache data_crc results   Wolfgang Denk
• [U-Boot] add usb_system_autoupdate command.   Wolfgang Denk
  • [U-Boot] [PATCH] sh: Update sh timer function   Wolfgang Denk
• [U-Boot] [PATCH] Add support for boards where the NOR FLASH is not memory-mapped   Wolfgang Denk
  • [U-Boot] [PATCH] Add support for boards where the NOR FLASH is not memory-mapped   Stefan Roese
• [U-Boot] PATCH: mpc8xx PLPRCR (init_pll_866)   Wolfgang Denk
• [U-Boot] [PATCH] serial: Add vcth UART driver   Wolfgang Denk
• [U-Boot] [PATCH 1/2] Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.c   Wolfgang Denk
• [U-Boot] [PATCH 2/2] Minor changes to allow clean creation of new i386/sc520 boards   Wolfgang Denk
• [U-Boot] [PATCH] inka4x0: hardware diagnosis and RTC.   Wolfgang Denk
• [U-Boot] [PATCH] inka4x0: board specific RTC support.   Wolfgang Denk
  • [U-Boot] [PATCH] inka4x0: board specific RTC support.   Detlev Zundel
• [U-Boot] scan jffs2 NAND slow and bad block   Derek Ou
  • [U-Boot] scan jffs2 NAND slow and bad block   Wolfgang Denk
• [U-Boot] [PATCH] Hardware diagnosis for inka4x0 boards.   Wolfgang Denk
  • [U-Boot] [PATCH] Hardware diagnosis for inka4x0 boards.   Detlev Zundel
• [U-Boot] [PATCH] libfdt: Fix redefined uintptr_t warning for USE_HOSTCC   Wolfgang Denk
• [U-Boot] mkimage warning: ISO C99 requires ...   Wolfgang Denk
• [U-Boot] Microblaze patches   Wolfgang Denk
  • [U-Boot] Microblaze patches   Michal Simek
    • [U-Boot] We have data for Physicians, Chiropractors, Physicians etc..   Genevieve clue
    • [U-Boot] [PATCH] fs/fat: handle FAT on SATA   Mike Frysinger
    • [U-Boot] [PATCH] fs/fat: handle FAT on SATA   Wolfgang Denk
    • [U-Boot] [PATCH] tools/netconsole: new script for working with netconsole over UDP   Mike Frysinger
    • [U-Boot] [PATCH] tools/netconsole: new script for working with netconsole over UDP   Wolfgang Denk
    • [U-Boot] [PATCH] tools/netconsole: new script for working with netconsole over UDP   Mike Frysinger
    • [U-Boot] [PATCH] easylogo: add optional gzip support   Mike Frysinger
    • [U-Boot] [PATCH] easylogo: add optional gzip support   Wolfgang Denk
    • [U-Boot] [PATCH v2] easylogo: add optional gzip support   Mike Frysinger
    • [U-Boot] [PATCH v2] easylogo: add optional gzip support   Wolfgang Denk
    • [U-Boot] [PATCH v2] easylogo: add optional gzip support   Mike Frysinger
    • [U-Boot] [PATCH v3] easylogo: add optional gzip support   Mike Frysinger
    • [U-Boot] [PATCH v3] easylogo: add optional gzip support   Wolfgang Denk
    • [U-Boot] [PATCH v4] easylogo: add optional gzip support   Mike Frysinger
• [U-Boot] confirm ab7aa8d57acab3af6153abdd3ca6718a0607f956   Uday Pavadshetty
  • [U-Boot] [PATCH] Fix compile error in building MBX860T.   Ben Warren
  • [U-Boot] [PATCH] Fix compile error in building MBX860T.   Wolfgang Denk
• [U-Boot] HOSTCC version   Andy Pont
  • [U-Boot] HOSTCC version   Wolfgang Denk
    • [U-Boot] HOSTCC version   Andy Pont
      • [U-Boot] HOSTCC version   Wolfgang Denk
      • [U-Boot] HOSTCC version   Mike Frysinger
• [U-Boot] Pull request - microblaze   Michal Simek
  • [U-Boot] Pull request - microblaze   Wolfgang Denk
    • [U-Boot] [PATCH] UBI: Return -ENOMEM upon failing malloc   Stefan Roese
    • [U-Boot] [PATCH] UBI: Set ubi_dev.type back to DEV_TYPE_NONE upon failing initialization   Stefan Roese
    • [U-Boot] [PATCH v2] Add support for boards where the NOR FLASH is not memory-mapped   Stefan Roese
    • [U-Boot] [PATCH v2] Add support for boards where the NOR FLASH is not memory-mapped   Scott Wood
    • [U-Boot] [PATCH v2] Add support for boards where the NOR FLASH is not memory-mapped   Stefan Roese
  • [U-Boot] init FEC @ MPC5200   Andre Schwarz
    • [U-Boot] init FEC @ MPC5200   Ben Warren
      • [U-Boot] init FEC @ MPC5200   André Schwarz
      • [U-Boot] [PATCH v2] UBI: Return -ENOMEM upon failing malloc   Stefan Roese
• [U-Boot] [ubi] Please pull git://www.denx.de/git/u-boot-ubi.git   Stefan Roese
  • [U-Boot] [ubi] Please pull git://www.denx.de/git/u-boot-ubi.git   Wolfgang Denk
• [U-Boot] Create a Bootable DAS U-Boot pen drive   muffie at lavabit.com
• [U-Boot] Create a Bootable DAS U-Boot pen drive   muffie at lavabit.com
• [U-Boot] [PATCH 3/6] jffs2: rewrite jffs2 scanning code based on Linux one   Stefan Roese
  • [U-Boot] [PATCH 3/6] jffs2: rewrite jffs2 scanning code based on Linux one   Ilya Yanok
    • [U-Boot] [PATCH] jffs2: include <linux/mtd/compat.h> instead of defining own min_t   Ilya Yanok
    • [U-Boot] [PATCH] jffs2: include <linux/mtd/compat.h> instead of defining own min_t   Stefan Roese
    • [U-Boot] [PATCH] jffs2: include <linux/mtd/compat.h> instead of defining own min_t   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] ppc4xx: Fix Ethernet PHY LED configuration on PMC440 boards   Matthias Fuchs
  • [U-Boot] [PATCH 2/2] ppc4xx: Disable EEPROM write access on PMC440 boards   Matthias Fuchs
• [U-Boot] Pull request: u-boot-sh   Nobuhiro Iwamatsu
  • [U-Boot] Pull request: u-boot-sh   Wolfgang Denk
• [U-Boot] [PATCH] USB storage cleanup patch   Michael Trimarchi
• [U-Boot] [GIT PULL] MIPS updates   Shinya Kuribayashi
  • [U-Boot] [GIT PULL] MIPS updates   Wolfgang Denk
    • [U-Boot] [PATCH] common/main: support bootdelay=0 for CONFIG_AUTOBOOT_KEYED   Peter Korsgaard
    • [U-Boot] [PATCH] common/main: support bootdelay=0 for CONFIG_AUTOBOOT_KEYED   Wolfgang Denk
    • [U-Boot] [PATCH] common/main: support bootdelay=0 for CONFIG_AUTOBOOT_KEYED   Peter Korsgaard
• [U-Boot] [RFC USB PATCH 1/3 V3] Prepare USB layer for ehci support   Michael Trimarchi
  • [U-Boot] [RFC USB PATCH 1/3 V3] Prepare USB layer for ehci support   Remy Bohmer
    • [U-Boot] [RFC USB PATCH 1/3 V3] Prepare USB layer for ehci support   michael
• [U-Boot] [RFC USB PATCH 2/3 V3] USB ehci core support   Michael Trimarchi
• [U-Boot] [RFC USB PATCH 3/3 V3] USB ehci freescale support   Michael Trimarchi
• [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Stefan Roese
  • [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git   Wolfgang Denk
• [U-Boot] Adding NAND Boot to uboot   Fahd Abidi
  • [U-Boot] Adding NAND Boot to uboot   Scott Wood
• [U-Boot] [RFC USB PATCH] USB ehci fix   Michael Trimarchi
  • [PATCH] Fix EHCI usb. I start to test on a IXP465 board and I find some errors in the code. This patch fix: - descriptor initizialization (config, interface and endpoint must be one next-to the other when the USB_DT_CONFIG message is send. - FIX little/endian bigendian (introduce the CONFIG_EHCI_DESC_BIG_ENDIAN and the CONFIG_EHCI_MMIO_BIG_ENDIAN) - Introduce the linux version of the usb_config_descriptor and usb_interface descriptor. This descriptor does't contains u-boot extension.   michael
• [U-Boot] [RFC USB PATCH V2] USB ehci fix (truncate problem)   Michael Trimarchi
  • [U-Boot] [RFC USB PATCH V2] USB ehci fix (truncate problem)   Remy Bohmer
• [U-Boot] About assign parameters for bootm command   mike xu
  • [U-Boot] About assign parameters for bootm command   Wolfgang Denk
    • [U-Boot] About assign parameters for bootm command   mike xu
• [U-Boot] Commit at91: Choose environment variables location within make config target   Remy Bohmer
  • [U-Boot] [PATCH] at91: Fix Choose environment variables location out of tree build   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] at91: Fix Choose environment variables location out of tree build   Wolfgang Denk
• [U-Boot] bootm command: is there any load address limitation for fdt?   Richard Retanubun
  • [U-Boot] bootm command: is there any load address limitation for fdt?   Wolfgang Denk
    • [U-Boot] bootm command: is there any load address limitation for fdt?   Jerry Van Baren
      • [U-Boot] bootm command: is there any load address limitation for fdt?   Richard Retanubun
      • [U-Boot] [PATCH] smc911x_eeprom: new example app for managing newer SMC parts   Mike Frysinger
      • [U-Boot] [PATCH] smc911x_eeprom: new example app for managing newer SMC parts   Wolfgang Denk
• [U-Boot] SATA/IDE/etc... init   Mike Frysinger
  • [U-Boot] SATA/IDE/etc... init   Wolfgang Denk
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Mike Frysinger
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Kumar Gala
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Mike Frysinger
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Kumar Gala
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Mike Frysinger
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Scott Wood
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Mike Frysinger
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Scott Wood
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Mike Frysinger
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Scott Wood
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Mike Frysinger
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Wolfgang Denk
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Mike Frysinger
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Wolfgang Denk
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Wolfgang Denk
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Mike Frysinger
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Scott Wood
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Mike Frysinger
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Wolfgang Denk
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Wolfgang Denk
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Kumar Gala
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Mike Frysinger
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Wolfgang Denk
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Kumar Gala
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Wolfgang Denk
    • [U-Boot] [PATCH] SATA: do not auto-initialize during boot   Kumar Gala
    • [U-Boot] SATA/IDE/etc... init   Mike Frysinger
      • [U-Boot] SATA/IDE/etc... init   Scott Wood
      • [U-Boot] SATA/IDE/etc... init   Wolfgang Denk
      • [U-Boot] SATA/IDE/etc... init   Mike Frysinger
      • [U-Boot] [PATCH v2] SATA: do not auto-initialize during boot   Mike Frysinger
      • [U-Boot] [PATCH v2] SATA: do not auto-initialize during boot   Kumar Gala
      • [U-Boot] [PATCH v3] SATA: do not auto-initialize during boot   Mike Frysinger
      • [U-Boot] SATA/IDE/etc... init   Stefan Roese
      • [U-Boot] SATA/IDE/etc... init   Mike Frysinger
• [U-Boot] flash erasing: len alignment   Mike Frysinger
  • [U-Boot] flash erasing: len alignment   Wolfgang Denk
    • [U-Boot] flash erasing: len alignment   Mike Frysinger
      • [U-Boot] flash erasing: len alignment   Wolfgang Denk
• [U-Boot] U-boot build failes witharmv5tel-reghat-linux-gnueabi-gcc (4.1.2)   Prafulla Wadaskar
  • [U-Boot] U-boot build failes witharmv5tel-reghat-linux-gnueabi-gcc (4.1.2)   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] U-boot build faileswitharmv5tel-reghat-linux-gnueabi-gcc (4.1.2)   Prafulla Wadaskar
  • [PATCH] nandboot with 2k pages  
• [U-Boot] U-Boot hangs in start_armboot()   Roman Mashak
  • [U-Boot] U-Boot hangs in start_armboot()   Roman Mashak
    • [U-Boot] U-Boot hangs in start_armboot()   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] U-Boot hangs in start_armboot()   Roman Mashak
      • [U-Boot] U-Boot hangs in start_armboot()   Roman Mashak
      • [U-Boot] U-Boot hangs in start_armboot()   Roman Mashak
      • [U-Boot] [PATCH v3] Add support for boards where the NOR FLASH is not memory-mapped   Stefan Roese
      • [U-Boot] [PATCH] env_sf: support embedded environments   Mike Frysinger
      • [U-Boot] [PATCH] env_sf: support embedded environments   Haavard Skinnemoen
      • [U-Boot] [PATCH] env_sf: support embedded environments   Wolfgang Denk
  • [PATCH] This patch add varius fix to the ehci. - fix ehci_readl, ehci_writel - introduce new define in ehci.h - introduce the handshake function for waiting on a register - fix usb_ehci_fsl with the new HC_LENGTH macro   michael
• [U-Boot] [RFC USB PATCH] USB ehci I/O function fix   Michael Trimarchi
  • [U-Boot] [RFC USB PATCH] USB ehci I/O function fix   Remy Bohmer
  • [U-Boot] [U-Boot-v2][PATCH] imx27: nandboot with 2k pages   frederic Rodo
    • [U-Boot] [U-Boot-v2][PATCH] imx27: nandboot with 2k pages   Sascha Hauer
  • [U-Boot] [U-Boot-v2][PATCH] imx27: correct READ ID cmd with 2k pages   frederic Rodo
• [U-Boot] problem doing rebase in fresh git.denx.de/u-boot.git clone   Peter Vollmer
  • [U-Boot] problem doing rebase in fresh git.denx.de/u-boot.git clone   Wolfgang Denk
    • [U-Boot] problem doing rebase in fresh git.denx.de/u-boot.git clone   Peter Vollmer
      • [U-Boot] problem doing rebase in fresh git.denx.de/u-boot.git clone   Wolfgang Denk
      • [U-Boot] problem doing rebase in fresh git.denx.de/u-boot.git clone   Peter Vollmer
      • [U-Boot] problem doing rebase in fresh git.denx.de/u-boot.git clone   Wolfgang Denk
• [U-Boot] [PATCH v2 0/4] Flex-OneNAND support   Rohit Hagargundgi
• [U-Boot] [PATCH v2 1/4] Flex-OneNAND driver   Rohit Hagargundgi
  • [U-Boot] [PATCH v2 1/4] Flex-OneNAND driver   Scott Wood
• [U-Boot] [PATCH v2 2/4] Environment support for Flex-OneNAND   Rohit Hagargundgi
• [U-Boot] [PATCH v2 3/4] JFFS2 commands support for Flex-OneNAND   Rohit Hagargundgi
• [U-Boot] [PATCH v2 4/4] Flex-OneNAND boundary setting command   Rohit Hagargundgi
• [U-Boot] [PATCH 0/3] Bad blocks and Partition support for OneNAND / Flex-OneNAND   Rohit Hagargundgi
• [U-Boot] [PATCH 1/3] Bad block support for environment variables partition in OneNAND   Rohit Hagargundgi
• [U-Boot] [PATCH 2/3] Add partition based OneNAND commands   Rohit Hagargundgi
• [U-Boot] [PATCH 3/3] Create bad block aware partition table   Rohit Hagargundgi
• [U-Boot] nios: Move README.nios_CONFIG_SYS_NIOS_CPU to doc/ dir   Shinya Kuribayashi
  • [U-Boot] nios: Move README.nios_CONFIG_SYS_NIOS_CPU to doc/ dir   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] NetLoop() code ordering   Ben Warren
  • [U-Boot] [PATCH] NAND CMD: Add bad block skipping for nboot   David.Kondrad at onqlegrand.com
    • [U-Boot] [PATCH] NAND CMD: Add bad block skipping for nboot   Scott Wood
• [U-Boot] [PATCH] tsec: report when there is no vendor specific PHY support.   Paul Gortmaker
  • [U-Boot] [PATCH 0/3] sbc8548 PHY fix, cmdline editing.   Paul Gortmaker
• [U-Boot] [PATCH 1/3] sbc8548: don't enable the 3rd and 4th eTSEC   Paul Gortmaker
  • [U-Boot] [PATCH 2/3] sbc8548: use proper PHY address   Paul Gortmaker
• [U-Boot] [PATCH 3/3] sbc8548: enable command line editing by default.   Paul Gortmaker
• [U-Boot] crash when doing `sf probe` multiple times due to API miscommunication   Mike Frysinger
  • [U-Boot] crash when doing `sf probe` multiple times due to API miscommunication   Mike Frysinger
• [U-Boot] spansion spi flash driver ?   Mike Frysinger
• [U-Boot] [PATCH] mtd: SPI Flash: Winbond W25X16/WX2532/WX2564 support   Mike Frysinger
  • [U-Boot] [PATCH] tsec: report when there is no vendor specific PHY support.   Andy Fleming
  • [U-Boot] [PATCH] cmd_sf: rename "speed" to "hz"   Mike Frysinger
  • [U-Boot] [PATCH] cmd_sf: rename "speed" to "hz"   Wolfgang Denk
  • [U-Boot] [PATCH] cmd_sf: rename "speed" to "hz"   Mike Frysinger
  • [U-Boot] [PATCH] cmd_sf: rename "speed" to "hz"   Wolfgang Denk
  • [U-Boot] [PATCH] cmd_sf: rename "speed" to "hz"   Mike Frysinger
  • [U-Boot] [PATCH] cmd_sf: rename "speed" to "hz"   Jerry Van Baren
  • [U-Boot] [PATCH] spi/stmicro: fix debug() display of cmd   Mike Frysinger
  • [U-Boot] [PATCH] spi/stmicro: fix debug() display of cmd   Wolfgang Denk
• [U-Boot] Spansion S29JL032H and detecting problem   Roman Mashak
• [U-Boot] EHCI last patch   michael
  • [U-Boot] EHCI last patch   Stefan Roese
    • [U-Boot] EHCI last patch   michael
      • [U-Boot] EHCI last patch   Stefan Roese
• [U-Boot] [RFC USB PATCH] USB ehci fix and test on ixp4xx hardware   Michael Trimarchi
  • [U-Boot] [RFC USB PATCH] USB ehci fix and test on ixp4xx hardware   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [RFC USB PATCH] USB ehci fix and test on ixp4xx hardware   michael
    • [U-Boot] [RFC USB PATCH] USB ehci fix and test on ixp4xx hardware   Stefan Roese
      • [U-Boot] [RFC USB PATCH] USB ehci fix and test on ixp4xx?hardware   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [RFC USB PATCH] USB ehci fix and test on ixp4xx hardware   Remy Bohmer
• [U-Boot] [RFC USB PATCH V2] USB ehci fix and test on ixp4xx hardware   Michael Trimarchi
  • [U-Boot] [RFC USB PATCH V2] USB ehci fix and test on ixp4xx hardware   Remy Bohmer
    • [U-Boot] [RFC USB PATCH V2] USB ehci fix and test on ixp4xx hardware   michael
• [U-Boot] reducing u-boot.bin size   Fahd Abidi
  • [U-Boot] reducing u-boot.bin size   Wolfgang Denk
• [U-Boot] [HELP]uboot 1.3.4 can't work on my MPC8548 board   hank peng
  • [PATCH] The ending LBA is inclusive. Hence, the partition size should be ((ending-LBA + 1) - starting-LBA) to get the proper partition size.   Richard Retanubun
• [U-Boot] [PATCH] part_efi: Fix partition size calculation due to inclusive ending LBA.   Richard Retanubun
  • [U-Boot] dts to dtb generation   Marco Antônio Possamai
    • [U-Boot] dts to dtb generation   Jerry Van Baren
    • [U-Boot] dts to dtb generation   Detlev Zundel
• [U-Boot] CFI: flash_write_cfiword() slow   Jens Gehrlein
• [U-Boot] FPGA programming driver architecture   Hugo Villeneuve
  • [U-Boot] FPGA programming driver architecture   Hugo Villeneuve
  • [U-Boot] FPGA programming driver architecture   Wolfgang Denk
    • [U-Boot] FPGA programming driver architecture   Hugo Villeneuve
      • [U-Boot] FPGA programming driver architecture   Wolfgang Denk
      • [U-Boot] [PATCH] mpc83xx: Size optimization of start.S   Ron Madrid
      • [U-Boot] [PATCH] mpc83xx: Size optimization of start.S   Jens Gehrlein
      • [U-Boot] [PATCH] mpc83xx: Size optimization of start.S   Scott Wood
      • [U-Boot] [PATCH] mpc83xx: Size optimization of start.S   Jens Gehrlein
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Graeme Russ
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Remy Bohmer
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Graeme Russ
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Mike Frysinger
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Graeme Russ
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Mike Frysinger
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Graeme Russ
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Mike Frysinger
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Shinya Kuribayashi
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Joakim Tjernlund
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Shinya Kuribayashi
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Remy Bohmer
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Shinya Kuribayashi
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Graeme Russ
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Joakim Tjernlund
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Shinya Kuribayashi
      • [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)   Graeme Russ
      • [U-Boot] [PATCH] MTD:NAND Enable nand lock, unlock feature   Nishanth Menon
      • [U-Boot] [PATCH] MTD:NAND Enable nand lock, unlock feature   Scott Wood
• [U-Boot] Warning in ffs2_1pass.c   Dirk Behme
  • [U-Boot] Warning in ffs2_1pass.c   Scott Wood
    • [U-Boot] [PATCH] usb: fix wait_ms declaration   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH] usb: fix wait_ms declaration   Wolfgang Denk
    • [U-Boot] [PATCH] usb: fix wait_ms declaration   Magnus Lilja
    • [U-Boot] [PATCH] integratorap: fix PCI support   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH] move ARM Ltd. to verdor dir   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH] move ARM Ltd. to verdor dir   Wolfgang Denk
• [U-Boot] fat.c:707: warning: array subscript is above array bounds   Wolfgang Denk
  • [U-Boot] fat.c:707: warning: array subscript is above array bounds   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] fat.c:707: warning: array subscript is above array bounds   Wolfgang Denk
      • [U-Boot] fat.c:707: warning: array subscript is above array bounds   David Hawkins
• [U-Boot] [PATCH] Remove compiler warning: target CPU does not support interworking   Wolfgang Denk
• [U-Boot] [PATCH V3] Fix FIT and fdt blob support to have CONFIG_OF_LIBFDT and CONFIG_FIT independant   Wolfgang Denk
  • [U-Boot] [PATCH v4 1/4] Introduce virt_to_phys()   Kumar Gala
  • [U-Boot] [PATCH v4 1/4] Introduce virt_to_phys()   Wolfgang Denk
  • [U-Boot] [PATCH v4 1/4] Introduce virt_to_phys()   Haavard Skinnemoen
  • [U-Boot] [PATCH v4 1/4] Introduce virt_to_phys()   Kumar Gala
  • [U-Boot] [PATCH v4 1/4] Introduce virt_to_phys()   Haavard Skinnemoen
  • [U-Boot] [PATCH v4 1/4] Introduce virt_to_phys()   Kumar Gala
  • [U-Boot] [PATCH v4 1/4] Introduce virt_to_phys()   Haavard Skinnemoen
  • [U-Boot] [PATCH v4 2/4] Introduce addr_map library   Kumar Gala
  • [U-Boot] [PATCH v4 3/4] 85xx: Add support to populate addr map based on TLB settings   Kumar Gala
  • [U-Boot] [PATCH v4 2/4] Introduce addr_map library   Wolfgang Denk
  • [U-Boot] [PATCH v4 2/4] Introduce addr_map library   Kumar Gala
  • [U-Boot] [PATCH v4 2/4] Introduce addr_map library   Wolfgang Denk
  • [U-Boot] [PATCH v4 2/4] Introduce addr_map library   Becky Bruce
  • [U-Boot] [PATCH v4 2/4] Introduce addr_map library   Wolfgang Denk
  • [U-Boot] [PATCH v4 4/4] ppc: Use addrmap in virt_to_phys and map_physmem.   Kumar Gala
  • [U-Boot] [PATCH 00/15 v6] OMAP3: Add support for some of TIs ARM-Cortex A8 OMAP3 boards   Dirk Behme
  • [U-Boot] [PATCH 01/15 v6] OMAP3: Add pin mux, clock and cpu headers   Dirk Behme
  • [U-Boot] [PATCH 00/15 v6] OMAP3: Add support for some of TIs ARM-Cortex A8 OMAP3 boards   Dirk Behme
  • [U-Boot] [PATCH 02/15 v6] OMAP3: Add OMAP3, memory and function prototype headers   Dirk Behme
  • [U-Boot] [PATCH 03/15 v6] OMAP3: Add common cpu and start code   Dirk Behme
  • [U-Boot] [PATCH 04/15 v6] OMAP3: Add common clock, memory and low level code   Dirk Behme
  • [U-Boot] [PATCH 05/15 v6] OMAP3: Add common board, interrupt and system info   Dirk Behme
  • [U-Boot] [PATCH 06/15 v6] OMAP3: Add NAND support   Dirk Behme
  • [U-Boot] [PATCH 07/15 v6] OMAP3: Add MMC support   Dirk Behme
  • [U-Boot] [PATCH 08/15 v6] OMAP3: Add I2C support   Dirk Behme
  • [U-Boot] [PATCH 09/15 v6] OMAP3: Add Beagle board and common power code   Dirk Behme
  • [U-Boot] [PATCH 10/15 v6] OMAP3: Add Overo board   Dirk Behme
  • [U-Boot] [PATCH 11/15 v6] OMAP3: Add Pandora support   Dirk Behme
  • [U-Boot] [PATCH 12/15 v6] OMAP3: Add EVM board   Dirk Behme
  • [U-Boot] [PATCH 13/15 v6] OMAP3: Add Zoom1 board support   Dirk Behme
  • [U-Boot] [PATCH 14/15 v6] OMAP3: Add Beagle, EVM and Overo configuration   Dirk Behme
  • [U-Boot] [PATCH 15/15 v6] OMAP3: Add Pandora config, main Makefile, README, MAKEALL and MAINTAINERS   Dirk Behme
  • [U-Boot] [PATCH 06/15 v6] OMAP3: Add NAND support   Scott Wood
  • [U-Boot] [PATCH] Fix new found CFG_   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] Fix new found CFG_   Wolfgang Denk
  • [U-Boot] [PATCH] Fix new found CFG_   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] cmd_mem: Remove unused variable   Wolfgang Denk
• [U-Boot] question about TEXT_BASE in U-boot   王睿
• [U-Boot] [PATCH] Added optional iteration limit for alternative memory test.   Wolfgang Denk
  • [U-Boot] question about TEXT_BASE in U-boot   wangrui
    • [U-Boot] question about TEXT_BASE in U-boot   tike64 at gmail.com
• [U-Boot] CONGRATULATIONS YOUR EMAIL ADDRESS EMERGED AS A WINNER IN THE NKL 2008   NKL INTERNATIONAL LOTTERY PROGRAM
• [U-Boot] Pluto not work after log message : Errno 28: No space left on device   陈琳涛
• [U-Boot] timer interface   Roman Mashak
• [U-Boot] TFTP server support in U-boot   santosh pattar
  • [U-Boot] [U-Boot-Users] TFTP server support in U-boot   Ben Warren
    • [U-Boot] [U-Boot-Users] TFTP server support in U-boot   Jerry Van Baren
      • [U-Boot] [U-Boot-Users] TFTP server support in U-boot   santosh pattar
      • [U-Boot] [U-Boot-Users] TFTP server support in U-boot   Wolfgang Denk
      • [U-Boot] [U-Boot-Users] TFTP server support in U-boot   Ben Warren
      • [U-Boot] [PATCH] common: Iteration limit for memory test.   Dirk Eibach
      • [U-Boot] [PATCH] common: Iteration limit for memory test.   Wolfgang Denk
• [U-Boot] U-boot to DE2 board with MMC interface (PIO based) and FAT support enabled   ivanchuklist ivanchu
• [U-Boot] DE2 board with MMC interface (PIO based) and FAT support enabled   ivanchuklist ivanchu
  • [U-Boot] DE2 board with MMC interface (PIO based) and FAT support enabled   Wolfgang Denk
• [U-Boot] [PATCH] at91: add at91sam9xeek board support   Nicolas Ferre
• [U-Boot] [RESEND][U-Boot-v2][PATCH] imx27: nandboot with 2k page   frederic rodo
• [U-Boot] [U-Boot-v2][PATCH] imx27: correct READ ID cmd with 2k pages   frederic rodo
• [U-Boot] [U-Boot-v2][PATCH] imx27: set pagesize_2k after probing the nand flash   frederic rodo
  • [U-Boot] [PATCH] at91: Fix Atmel's at91sam9 boards out of tree build   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] fix bmp_logo.h make dependencies to allow parallel build   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH v4] Add support for boards where the NOR FLASH is not memory-mapped   Stefan Roese
  • [U-Boot] [PATCH] serial: Rename driver vcth to vct to support other board variants   Stefan Roese
  • [U-Boot] [PATCH] MIPS: Add VCT board series support (Part 1/3)   Stefan Roese
  • [U-Boot] [PATCH] MIPS: Add VCT board series support (Part 1/3)   Andrew Dyer
  • [U-Boot] [PATCH] MIPS: Add VCT board series support (Part 1/3)   Stefan Roese
  • [U-Boot] [PATCH] MIPS: Add VCT board series support (Part 2/3)   Stefan Roese
  • [U-Boot] [PATCH] MIPS: Add VCT board series support (Part 3/3)   Stefan Roese
• [U-Boot] [PATCH] at91: add at91sam9xeek board support (typo)   Nicolas Ferre
  • [U-Boot] U-Boot hangs after uncompressing image   Marco Antônio Possamai
• [U-Boot] sectoff in asm   youhello youhello
  • [U-Boot] [PATCH 1/3] 85xx: Fix the boot window issue   Dave Liu
  • [U-Boot] [PATCH 2/3] 85xx: Fix the wrong CSIZE mask bit   Dave Liu
  • [U-Boot] [PATCH 2/3] 85xx: Fix the wrong CSIZE mask bit   Kumar Gala
  • [U-Boot] [PATCH 2/3] 85xx: Fix the wrong CSIZE mask bit   Liu Dave
  • [U-Boot] [PATCH 2/3] 85xx: Fix the wrong CSIZE mask bit   Kumar Gala
  • [U-Boot] [PATCH 2/3] 85xx: Fix the wrong CSIZE mask bit   Liu Dave
  • [U-Boot] [PATCH 3/3] Move the LAW definition to fsl_law.h   Dave Liu
  • [U-Boot] [PATCH 3/3] Move the LAW definition to fsl_law.h   Kumar Gala
  • [U-Boot] [PATCH 3/3] Move the LAW definition to fsl_law.h   Liu Dave
  • [U-Boot] [PATCH 3/3] Move the LAW definition to fsl_law.h   Kumar Gala
  • [U-Boot] [PATCH 3/3] Move the LAW definition to fsl_law.h   Liu Dave
• [U-Boot] MPC5121 MSCAN Peripheral in U-Boot   Matteo Canella
  • [U-Boot] MPC5121 MSCAN Peripheral in U-Boot   Wolfgang Denk
    • [U-Boot] MPC5121 MSCAN Peripheral in U-Boot   Matteo Canella
  • [U-Boot] MPC5121 MSCAN Peripheral in U-Boot   Wolfgang Grandegger
    • [U-Boot] [PATCH v2] common: Iteration limit for memory test.   Dirk Eibach
    • [U-Boot] [PATCH v2] common: Iteration limit for memory test.   Wolfgang Denk
    • [U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC support   Thomas Abraham
    • [U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC support   Dirk Behme
    • [U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC support   Subbrathnam, Swaminathan
    • [U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC support   Dirk Behme
    • [U-Boot] [PATCH 1/6] usb : musb : Add high speed field in usb_device structure   Thomas Abraham
    • [U-Boot] [PATCH 1/6] usb : musb : Add high speed field in usb_device structure   Remy Bohmer
    • [U-Boot] [PATCH 1/6] usb : musb : Add high speed field in usb_device structure   Abraham, Thomas
    • [U-Boot] [PATCH 1/6] usb : musb : Add high speed field in usb_device structure   Remy Bohmer
    • [U-Boot] [PATCH 1/6] usb : musb : Add high speed field in usb_device structure   michael
    • [U-Boot] [PATCH 2/6] usb : musb : Adding host controller driver for Mentor USB controller   Thomas Abraham
    • [U-Boot] [PATCH 3/6] usb : musb : Adding USB VBUS enable functionality for DM644x DVEVM   Thomas Abraham
    • [U-Boot] [PATCH 4/6] usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support   Thomas Abraham
    • [U-Boot] [PATCH 5/6] usb : musb : Enabling DM6446 (TI DaVinci) USB module power.   Thomas Abraham
    • [U-Boot] [PATCH 6/6] usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform   Thomas Abraham
• [U-Boot] include/autoconf.mk:212: *** missing separator. Stop.   Wolfgang Denk
  • [U-Boot] include/autoconf.mk:212: *** missing separator. Stop.   Becky Bruce
  • [U-Boot] include/autoconf.mk:212: *** missing separator. Stop.   Wolfgang Denk
• [U-Boot] header intact   chaitanya
  • [U-Boot] [PATCH] Makefile: fix dependency problem with parallel builds   Wolfgang Denk
  • [U-Boot] [PATCH] post/Makefile: fix dependency problem with parallel builds   Wolfgang Denk
  • [U-Boot] [PATCH v3] common: Iteration limit for memory test.   Dirk Eibach
• [U-Boot] CONFIG_ENV_ADDR incorrect in MPC8313ERDB.h   Norbert van Bolhuis
  • [U-Boot] [PATCH] trab: make trab_fkt standalone code independent of libgcc   Wolfgang Denk
  • [U-Boot] [PATCH] trab: make trab_fkt standalone code independent of libgcc   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] trab: make trab_fkt standalone code independent of libgcc   Wolfgang Denk
  • [U-Boot] [PATCH 0/2] CFI: increase performance   Jens Gehrlein
  • [U-Boot] [PATCH 1/2] CFI: avoid redundant function call in single word programming mode   Jens Gehrlein
  • [U-Boot] [PATCH 2/2] CFI: increase performance of function find_sector()   Jens Gehrlein
  • [U-Boot] [PATCH 0/2] CFI: increase performance   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 0/2] CFI: increase performance   Jens Gehrlein
  • [U-Boot] [PATCH 0/2] CFI: increase performance   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 0/2] CFI: increase performance   Jens Gehrlein
  • [U-Boot] [PATCH 0/2] CFI: increase performance   Stefan Roese
  • [U-Boot] [PATCH 0/2] CFI: increase performance   Wolfgang Denk
  • [U-Boot] [PATCH 0/2] CFI: increase performance   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Pull request: u-boot-usb   Remy Bohmer
  • [U-Boot] Pull request: u-boot-usb   Wolfgang Denk
  • [U-Boot] [PATCH] NAND: Mark the BBT as scanned prior to calling scan_bbt.   Scott Wood
    • [U-Boot] [PATCH 1/3] 85xx: Add support to populate addr map based on TLB settings   Kumar Gala
    • [U-Boot] [PATCH 2/3] ppc: Use addrmap in virt_to_phys and map_physmem.   Kumar Gala
    • [U-Boot] [PATCH 3/3] NAND FSL elbc: Use virt_to_phys to determine which bank is in use   Kumar Gala
  • [U-Boot] Pull request: nand flash   Scott Wood
    • [U-Boot] Pull request: nand flash   Liu Dave
      • [U-Boot] Pull request: nand flash   Scott Wood
      • [U-Boot] Pull request: nand flash   Liu Dave
    • [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] (no subject)   Cote, Sylvain
  • [U-Boot] [PATCH] board/trab/memory.c: Fix compile problems.   Wolfgang Denk
  • [U-Boot] [PATCH] include/configs/at91cap9adk.h: fix typo.   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] cmd_i2c: rename EDO, DDR and SDRAM to avoid conflict with at91 memory setup   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 2/2] m501sk: move to the common memory setup   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 1/2] cmd_i2c: rename EDO, DDR and SDRAM to avoid conflict with at91 memory setup   Wolfgang Denk
  • [U-Boot] [PATCH 1/2 V2] cmd_i2c: rename EDO, DDR and SDRAM to avoid conflict with at91 memory setup   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 1/2 V2] cmd_i2c: rename EDO, DDR and SDRAM to avoid conflict with at91 memory setup   Wolfgang Denk
  • [U-Boot] [PATCH 1/2 V2] cmd_i2c: rename EDO, DDR and SDRAM to avoid conflict with at91 memory setup   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 1/2 V2] cmd_i2c: rename EDO, DDR and SDRAM to avoid conflict with at91 memory setup   Wolfgang Denk
  • [U-Boot] [PATCH 1/2 V2] cmd_i2c: rename EDO, DDR and SDRAM to avoid conflict with at91 memory setup   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 1/2 V2] at91rm9200: rename lowlevel init value to CONFIG_SYS_   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 1/2 V2] at91rm9200: rename lowlevel init value to CONFIG_SYS_   Wolfgang Denk
  • [U-Boot] [PATCH 1/2 V2] at91rm9200: rename lowlevel init value to CONFIG_SYS_   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 1/2 V2] at91rm9200: rename lowlevel init value to CONFIG_SYS_   Wolfgang Denk
  • [U-Boot] [PATCH 1/2 V2] at91rm9200: rename lowlevel init value to CONFIG_SYS_   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 1/2 V2] at91rm9200: rename lowlevel init value to CONFIG_SYS_   Wolfgang Denk
• [U-Boot] v2009.01-rc1 is out - update of release schedule   Wolfgang Denk
• [U-Boot] li r0,__got2_entries at sectoff@l   youhello youhello
  • [U-Boot] [PATCH] mpc85xx shrink boot block page to 1M   Ed Swarthout
  • [U-Boot] [PATCH] mpc85xx shrink boot block page to 1M   Liu Dave
  • [U-Boot] [PATCH] mpc85xx shrink boot block page to 1M   Liu Dave
  • [U-Boot] [PATCH v7] ppc4xx: Add GDsys PowerPC 440 ETX board support.   Dirk Eibach
  • [U-Boot] [PATCH v7] ppc4xx: Add GDsys PowerPC 440 ETX board support.   Stefan Roese
  • [U-Boot] [PATCH v7] ppc4xx: Add GDsys PowerPC 440 ETX board support.   Eibach, Dirk
  • [U-Boot] [PATCH v7] ppc4xx: Add GDsys PowerPC 440 ETX board support.   Stefan Roese
• [U-Boot] [U-Boot-Users] TFTP server support in U-boot   Wolfgang Denk
• [U-Boot] [GIT PULL] MIPS updates   Shinya Kuribayashi
  • [U-Boot] [GIT PULL] MIPS updates   Wolfgang Denk
• [U-Boot] [PATCH 1/1] qemu_mips: update doc to generate and to use qemu flash, ide file   Shinya Kuribayashi
• [U-Boot] u-boot didn't mount ramdisk ...   mike xu
  • [U-Boot] u-boot didn't mount ramdisk ...   Wolfgang Denk
    • [U-Boot] u-boot didn't mount ramdisk ...   mike xu
    • [U-Boot] u-boot didn't mount ramdisk ...   mike xu
      • [U-Boot] u-boot didn't mount ramdisk ...   Wolfgang Denk
      • [U-Boot] u-boot didn't mount ramdisk ...   mike xu
      • [U-Boot] u-boot didn't mount ramdisk ...   Wolfgang Denk
      • [U-Boot] u-boot didn't mount ramdisk ...   mike xu
      • [U-Boot] u-boot didn't mount ramdisk ...   Wolfgang Denk
      • [U-Boot] u-boot didn't mount ramdisk ...   mike xu
• [U-Boot] [USB EHCI PATCH 0/2] USB ehci pci initial support   Michael Trimarchi
  • [U-Boot] [USB EHCI PATCH 0/2] USB ehci pci initial support   Remy Bohmer
    • [U-Boot] [USB EHCI PATCH 0/2] USB ehci pci initial support   michael
• [U-Boot] [USB EHCI PATCH 1/2] USB ehci remove infinite loop and use handshake function   Michael Trimarchi
  • [U-Boot] [USB EHCI PATCH 1/2] USB ehci remove infinite loop and use handshake function   Stefan Roese
    • [U-Boot] [USB EHCI PATCH 1/2] USB ehci remove infinite loop and use handshake function   michael
• [U-Boot] [USB EHCI PATCH 2/2] USB ehci ixp4xx support   Michael Trimarchi
  • [U-Boot] [PATCH] pxa: fixing get_timer to return time in miliseconds.   Micha Kalfon
  • [U-Boot] device-tree check MPC5200B Lite   Marco Antônio Possamai
    • [U-Boot] [PATCH 2/2 V2] m501sk: move to the common memory setup   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [mpc8313] objcopy generates huge binary   Matthew L. Creech
  • [U-Boot] [mpc8313] objcopy generates huge binary   Jerry Van Baren
    • [U-Boot] [mpc8313] objcopy generates huge binary   Matthew L. Creech
  • [U-Boot] [PATCH v6 0/3] Support for XPedite5370 and misc GPIO   Peter Tyser
    • [U-Boot] [PATCH v6 1/3] Add support for PCA953x I2C gpio devices   Peter Tyser
    • [U-Boot] [PATCH v6 2/3] Add support for Maxim's DS4510 I2C device   Peter Tyser
    • [U-Boot] [PATCH v6 3/3] XPedite5370 board support   Peter Tyser
    • [U-Boot] [PATCH v2 1/6] usb : musb : Record speed of high speed devices connected to hub   Thomas Abraham
    • [U-Boot] [PATCH v2 1/6] usb : musb : Record speed of high speed devices connected to hub   Gupta, Ajay Kumar
    • [U-Boot] [PATCH v2 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC support   Thomas Abraham
    • [U-Boot] [PATCH v2 2/6] usb : musb : Adding host controller driver for Mentor USB controller   Thomas Abraham
    • [U-Boot] [PATCH v2 3/6] usb : musb : Adding USB VBUS enable functionality for DM644x DVEVM   Thomas Abraham
    • [U-Boot] [PATCH v2 4/6] usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support   Thomas Abraham
    • [U-Boot] [PATCH v2 5/6] usb : musb : Enabling DM6446 (TI DaVinci) USB module power   Thomas Abraham
    • [U-Boot] [PATCH v2 6/6] usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform   Thomas Abraham
    • [U-Boot] [RFC] nand boot for 85xx   Dave Liu
    • [U-Boot] [RFC] nand boot for 85xx   Kumar Gala
    • [U-Boot] [RFC] nand boot for 85xx   Liu Dave
    • [U-Boot] [RFC] nand boot for 85xx   Kumar Gala
    • [U-Boot] [RFC] nand boot for 85xx   Liu Dave
    • [U-Boot] [RFC] nand boot for 85xx   Kumar Gala
• [U-Boot] [USB PATCH] USB change speed   Michael Trimarchi
• [U-Boot] About generate big-endian ramdisk   mike xu
• [U-Boot] What shall u-boot do before passing 'root=/dev/ram0' to kernel?   mike xu
  • [U-Boot] What shall u-boot do before passing 'root=/dev/ram0' to kernel?   Wolfgang Denk
    • [U-Boot] What shall u-boot do before passing 'root=/dev/ram0' to kernel?   mike xu
      • [U-Boot] What shall u-boot do before passing 'root=/dev/ram0' to kernel?   Wolfgang Denk
      • [U-Boot] [PATCH 1/1] ppc4xx: Autocalibration can set RDCC to over aggressive value.   Adam Graham
      • [U-Boot] [PATCH 1/1] ppc4xx: Autocalibration can set RDCC to over aggressive value.   Wolfgang Denk
      • [U-Boot] [PATCH V3] SH7750/51: add register BCR3, BCR4, PCR, RTCOR, RTCNT, RTCSR, SDMR2, SDMR3 and fix BCR2 support   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH V3] SH7750/51: add register BCR3, BCR4, PCR, RTCOR, RTCNT, RTCSR, SDMR2, SDMR3 and fix BCR2 support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] DHCP/BOOP command behavior   Brian S. Park
  • [U-Boot] DHCP/BOOP command behavior   Pawel Pastuszak
• [U-Boot] Write to JFFS2 filesystem   Jayakrishnan M
• [U-Boot] TSEC in loop   Alemao
• [U-Boot] How to initial the new memory within u-boot ?   peter meng
• [U-Boot] [PATCH] FPU POST: fix warnings when building with 2.18 binutils   Yuri Tikhonov
  • [U-Boot] [PATCH] sh: update sh timer coding style   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] sh: update sh2/sh2a timer coding style   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] drivers/net/e1000.c: missing terminator for supported devices   Stefan Althoefer
  • [U-Boot] [PATCH] drivers/net/e1000.c: missing terminator for supported devices   Stefan Althoefer
    • [U-Boot] [PATCH 1/2] sh: lowlevel_init coding style cleanup   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 2/2] sh: use write{8,16,32} in all lowlevel_init   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [Bug] IXP425 and e1000 network driver   Stefan Althoefer
• [U-Boot] hello   tessey geb
• [U-Boot] ARM926EJ-S: defining TEXT_BASE   Roman Mashak
  • [U-Boot] ARM926EJ-S: defining TEXT_BASE   Wolfgang Denk
• [U-Boot] Reg. working with uboot   Vanee S
  • [U-Boot] Reg. working with uboot   Wolfgang Denk
    • [U-Boot] Reg. working with uboot   Vanee S
      • [U-Boot] Reg. working with uboot   Wolfgang Denk
  • [U-Boot] Reg. working with uboot   Jerry Van Baren
  • [U-Boot] Reg. working with uboot   michael
• [U-Boot] Ask a question about compiler with u-boot?   peter meng
  • [U-Boot] [PATCH 1/2] smc911x: split out useful defines/functions into local header   Mike Frysinger
  • [U-Boot] [PATCH 2/2] smc911x_eeprom: new example app for managing newer SMC parts   Mike Frysinger
• [U-Boot] jffs2_1pass and jffs2_nand_1pass   Derek Ou
  • [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
  • [U-Boot] Please pull u-boot-mpc85xx.git   Peter Tyser
  • [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
  • [U-Boot] Please pull u-boot-mpc85xx.git   Peter Tyser
  • [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] ftp area ftp://ftp.denx.de/pub/u-boot/   Dusek, Richard (Richard)** CTR **
  • [U-Boot] ftp area ftp://ftp.denx.de/pub/u-boot/   Ben Warren
  • [U-Boot] ftp area ftp://ftp.denx.de/pub/u-boot/   Dirk Behme
• [U-Boot] [PATCH] NIOS2: Added DE2 board with SD support   ivanchuklist ivanchu
• [U-Boot] nand sector size is zero in jffs2 cmds   Derek Ou
  • [U-Boot] nand sector size is zero in jffs2 cmds   Derek Ou
• [U-Boot] [PATCH v2 2/6] usb : musb : Adding host controller driver for Mentor USB controller   Bryan Wu
  • [U-Boot] U-Boot on Xilinx ML510   Felix Radensky
    • [U-Boot] U-Boot on Xilinx ML510   Michal Simek
      • [U-Boot] U-Boot on Xilinx ML510   Felix Radensky
      • [U-Boot] U-Boot on Xilinx ML510   Michal Simek
• [U-Boot] Debugging U-Boot with BDI2000   Tommy Wang
  • [U-Boot] [PATCH 1/2] XPedite5200 board support cleanup   Peter Tyser
  • [U-Boot] [PATCH 1/2] XPedite5200 board support cleanup   Andy Fleming
  • [U-Boot] [PATCH 1/2] XPedite5200 board support cleanup   Peter Tyser
  • [U-Boot] [PATCH 2/2] 85xx: Enable inbound PCI config cycles for X-ES boards cleanup   Peter Tyser
• [U-Boot] Error in buffer data for NAND flash write, read on OMAP3430SDP.   Radha Krishna
  • [U-Boot] Error in buffer data for NAND flash write, read on OMAP3430SDP.   Dirk Behme
    • [U-Boot] Error in buffer data for NAND flash write, read on OMAP3430SDP.   Radha Krishna
      • [U-Boot] Error in buffer data for NAND flash write, read on OMAP3430SDP.   Nishanth Menon
      • [U-Boot] Error in buffer data for NAND flash write, read on OMAP3430SDP.   Nishanth Menon
• [U-Boot] hush shell script commands(eval)   rudresh
• [U-Boot] u-boot configurations for custom board with MPC 8265   Jyotshna Cherukuri
  • [U-Boot] u-boot configurations for custom board with MPC 8265   Jayakrishnan M
• [U-Boot] debug uboot from ram for x86 board   LanceZ
  • [U-Boot] debug uboot from ram for x86 board   Graeme Russ
    • [U-Boot] debug uboot from ram for x86 board   Lance Zhang
• [U-Boot] My Linux kernel hangs at the Uncompressing Linux ... phase   Diptopal Basu
  • [U-Boot] My Linux kernel hangs at the Uncompressing Linux ... phase   Piyush Shah
  • [U-Boot] My Linux kernel hangs at the Uncompressing Linux ... phase   Pink Boy
• [U-Boot] How does U boot pass kernel parameters to Operating System ...   Diptopal Basu
• [U-Boot] debug uboot from ram for x86 board   Lance Zhang
• [U-Boot] run_command() / do_run() fails in standalone application   rudresh
  • [U-Boot] run_command() / do_run() fails in standalone application   Remy Bohmer
    • [U-Boot] run_command() / do_run() fails in standalone application   Wolfgang Denk
      • [U-Boot] run_command() / do_run() fails in standalone application   Remy Bohmer
      • [U-Boot] run_command() / do_run() fails in standalone application   Wolfgang Denk
• [U-Boot] no console output when booting kernel!   tjzkzs
• [U-Boot] GOOD DAY,   MR AHMED HABIB
• [U-Boot] no kernel console output !   tjzkzs
  • [U-Boot] no kernel console output !   Jerry Van Baren
  • [U-Boot] no kernel console output !   Pawel Pastuszak
  • [U-Boot] [PATCH] ppc4xx: Fix UART baudrate setup by FDT   Matthias Fuchs
  • [U-Boot] [PATCH] ppc4xx: Enable auto RS485 mode on PLU405 boards   Matthias Fuchs
• [U-Boot] Uboot   石涛
• [U-Boot] Old version of u-boot(OF not supported) loads latest linux kernel(OF supported), any problem？   pengxihan
  • [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] [PATCH] soft_i2c.c add option for repeated start in i2c_read()   Andrew Dyer
• [U-Boot] [PATCH] Fix up rsk7203 target for out of tree build   Kieran Bingham
• [U-Boot] [PATCH] [update] Fix up rsk7203 target for out of tree build   Kieran Bingham
• [U-Boot] Minor bug found in board/zylonite/lowlevel_init.S. 0x300 changed to 300.   Tom Evans
• [U-Boot] [PATCH][u-boot-85xx]The 32bit errata fix for 8572 for DDR2 (fwd)   Poonam_Aggrwal-b10812
• [U-Boot] Spansion Flash File system   Naveen A
  • [U-Boot] Spansion Flash File system   Marc Leeman
  • [U-Boot] Spansion Flash File system   Wolfgang Denk
• [U-Boot] [PATCH] Add AMD 29LV160DB FLASH support to SBC2410 board.   Daniel Schuler
• [U-Boot] [PATCH] Blackfin: fix linker scripts to work with --gc-sections   Mike Frysinger
  • [U-Boot] [PATCH] usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive   Mike Frysinger
  • [U-Boot] [PATCH] usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive   Wolfgang Denk
  • [U-Boot] [PATCH] usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive   Bryan Wu
  • [U-Boot] [PATCH] usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive   Mike Frysinger
  • [U-Boot] [PATCH] usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive   Wolfgang Denk
  • [U-Boot] [PATCH] spi/atmel: add AT45DB321D support   Mike Frysinger
  • [U-Boot] [PATCH] saveenv: standardize enablement   Mike Frysinger
• [U-Boot] Too Large patch   kenneth johansson
  • [U-Boot] Too Large patch   Mike Frysinger
    • [U-Boot] Too Large patch   Wolfgang Denk
      • [U-Boot] Too Large patch   Mike Frysinger
      • [U-Boot] Too Large patch   Wolfgang Denk
      • [U-Boot] Too Large patch   Mike Frysinger
• [U-Boot] [PATCH] make make quiet   kenneth johansson
  • [U-Boot] [PATCH] make make quiet   Wolfgang Denk
    • [U-Boot] [PATCH] make make quiet   kenneth johansson
      • [U-Boot] [PATCH] make make quiet   Wolfgang Denk
  • [U-Boot] [PATCH] make make quiet   Mike Frysinger
• [U-Boot] Copy environment variables to another board   Giuseppe Modugno
  • [U-Boot] Copy environment variables to another board   Wolfgang Denk
    • [U-Boot] Copy environment variables to another board   Giuseppe Modugno
      • [U-Boot] Copy environment variables to another board   Alessandro Rubini
      • [U-Boot] Copy environment variables to another board   Giuseppe Modugno
      • [U-Boot] Copy environment variables to another board   Wolfgang Denk
    • [U-Boot] Copy environment variables to another board   Giuseppe Modugno
• [U-Boot] [PATCH] make make quiet   kenneth johansson
  • [U-Boot] [PATCH] make make quiet   Wolfgang Denk
    • [U-Boot] [PATCH] make make quiet   Scott Wood
      • [U-Boot] [PATCH] make make quiet   Wolfgang Denk
    • [U-Boot] [PATCH] make make quiet   kenneth johansson
      • [U-Boot] [PATCH] make make quiet   Mike Frysinger
      • [U-Boot] [PATCH] make make quiet   kenneth johansson
      • [U-Boot] [PATCH] make make quiet   Mike Frysinger
      • [U-Boot] [PATCH] make make quiet   kenneth johansson
      • [U-Boot] [PATCH] make make quiet   Wolfgang Denk
• [U-Boot] ARM: set up endianess   Roman Mashak
• [U-Boot] Is it possible to use 2GB or DDR on MPC834x?   Valeriy Glushkov
  • [U-Boot] Is it possible to use 2GB or DDR on MPC834x?   Scott Wood
• [U-Boot] [PATCH 1/1] jffs2: Fix zero sector_size when not using CONFIG_JFFS2_CMDLINE   Tomasz Figa
  • [U-Boot] [PATCH] README: update mailing list name and hits to patch submission.   Wolfgang Denk
• [U-Boot] nand potential div0   Ryan J M
• [U-Boot] [USB EHCI V2 PATCH 0/2] Add initial support for USB ehci pci   Michael Trimarchi
  • [U-Boot] [USB EHCI V2 PATCH 0/2] Add initial support for USB ehci pci   Remy Bohmer
    • [U-Boot] [USB EHCI V2 PATCH 0/2] Add initial support for USB ehci pci   michael
• [U-Boot] [USB EHCI V2 PATCH 1/2] USB ehci remove infinite loop and use handshake function   Michael Trimarchi
• [U-Boot] [USB EHCI V2 PATCH 2/2] USB ehci ixp4xx support   Michael Trimarchi
• [U-Boot] [PATCH] Add AMD 29LV160DB FLASH support to SBC-2410A board.   Daniel Schuler
  • [U-Boot] [PATCH 0/5] Command usage cleanup   Peter Tyser
  • [U-Boot] [PATCH 1/5] Clean up diufb command definitions   Peter Tyser
  • [U-Boot] [PATCH 2/5] pcs440ep: Clean up led command definition   Peter Tyser
  • [U-Boot] [PATCH 3/5] Standardize command usage messages with cmd_usage()   Peter Tyser
  • [U-Boot] [PATCH 4/5] amcc: Clean up command usage output   Peter Tyser
  • [U-Boot] [PATCH 5/5] Command usage cleanup   Peter Tyser
• [U-Boot] Bug in nand_default_bbt?   Nishanth Menon

Last message date: Wed Dec 31 22:31:41 CET 2008
Archived on: Wed Dec 31 22:31:47 CET 2008

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...