[U-Boot] [PATCH v3] nand: Fix cache and memory inconsistent issue

[Stefan Roese]

On Tuesday 02 December 2008, Dave Liu wrote:
> we load the secondary stage u-boot image from NAND to
> system memory by nand_load, but we did not flush d-cache
> to memory, not invalidate i-cache before we jump to RAM.
> when the system is cache enable and the TLB/page attribute
> of system memory is cacheable, it will cause issue.
>
> - 83xx family is using the d-cache lock, so all of d-cache
>   access is cache-inhibited. so you can't see the issue.
> - 85xx family is using d-cache, i-cache enable, partial
>   cache lock. you will see the issue.
>
> The patch fix the cache issue.
>
> Signed-off-by: Dave Liu <daveliu at freescale.com>
> ---
> Stefan,
>
> I'm not familiar with ppc4xx, could you workout one
> patch for nand_boot.c?

All 4xx platforms using nand_boot.c run with D-Cache disabled at that time. So 
it's currently not needed here.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================