December 2008 Archives by subject
Starting: Mon Dec 1 07:36:15 CET 2008
Ending: Wed Dec 31 22:31:41 CET 2008
Messages: 1219
- [U-Boot] (no subject)
Cote, Sylvain
- [U-Boot] 460EX PCI Boot SUCCESS and question
Ayman M. El-Khashab
- [U-Boot] [ARM] How up-to-date is http://www.denx.de/wiki/U-Boot/PatchStatus ?
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [ARM] How up-to-date is http://www.denx.de/wiki/U-Boot/PatchStatus ?
Thomas De Schampheleire
- [U-Boot] [ARM] How up-to-date is http://www.denx.de/wiki/U-Boot/PatchStatus ?
Wolfgang Denk
- [U-Boot] [Bug Report] USB: descriptor handling
Stefan Althoefer
- [U-Boot] [Bug Report] USB: descriptor handling
Remy Bohmer
- [U-Boot] [Bug Report] USB: descriptor handling
Stefan Althoefer
- [U-Boot] [Bug] ARM: early environment broken
Stefan Althoefer
- [U-Boot] [Bug] IXP425 and e1000 network driver
Stefan Althoefer
- [U-Boot] [Fwd: Re: iPAQ 21x support (+PXA3xx NAND flash and MMC)]
Oliver Ford
- [U-Boot] [GIT PULL] MIPS updates
Shinya Kuribayashi
- [U-Boot] [GIT PULL] MIPS updates
Wolfgang Denk
- [U-Boot] [GIT PULL] MIPS updates
Shinya Kuribayashi
- [U-Boot] [GIT PULL] MIPS updates
Wolfgang Denk
- [U-Boot] [HELP]uboot 1.3.4 can't work on my MPC8548 board
hank peng
- [U-Boot] [mpc8313] objcopy generates huge binary
Matthew L. Creech
- [U-Boot] [mpc8313] objcopy generates huge binary
Jerry Van Baren
- [U-Boot] [mpc8313] objcopy generates huge binary
Matthew L. Creech
- [U-Boot] [PATCH 0/2] CFI: increase performance
Jens Gehrlein
- [U-Boot] [PATCH 0/2] CFI: increase performance
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 0/2] CFI: increase performance
Jens Gehrlein
- [U-Boot] [PATCH 0/2] CFI: increase performance
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 0/2] CFI: increase performance
Jens Gehrlein
- [U-Boot] [PATCH 0/2] CFI: increase performance
Stefan Roese
- [U-Boot] [PATCH 0/2] CFI: increase performance
Wolfgang Denk
- [U-Boot] [PATCH 0/2] CFI: increase performance
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH v2 0/2] net: Additional IP fragmentation check
Peter Tyser
- [U-Boot] [PATCH 0/3] Bad blocks and Partition support for OneNAND / Flex-OneNAND
Rohit Hagargundgi
- [U-Boot] [PATCH 0/3] sbc8548 PHY fix, cmdline editing.
Paul Gortmaker
- [U-Boot] [PATCH 0/5] Command usage cleanup
Peter Tyser
- [U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC support
Thomas Abraham
- [U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC support
Dirk Behme
- [U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC support
Subbrathnam, Swaminathan
- [U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC support
Dirk Behme
- [U-Boot] [PATCH 00/11] Allow PCI bus address, PA, and VA to differ
Becky Bruce
- [U-Boot] [PATCH 00/15 v6] OMAP3: Add support for some of TIs ARM-Cortex A8 OMAP3 boards
Dirk Behme
- [U-Boot] [PATCH 00/15 v6] OMAP3: Add support for some of TIs ARM-Cortex A8 OMAP3 boards
Dirk Behme
- [U-Boot] [PATCH 00/15] i386 Modifications and new board (eNET)
Graeme Russ
- [U-Boot] [PATCH 01/11] powerpc: fix io.h build warning with CONFIG_PHYS_64BIT
Becky Bruce
- [U-Boot] [PATCH 01/11] powerpc: fix io.h build warning with CONFIG_PHYS_64BIT
Wolfgang Denk
- [U-Boot] [PATCH 01/11] powerpc: fix io.h build warning with CONFIG_PHYS_64BIT
Wolfgang Denk
- [U-Boot] [PATCH 01/15 v6] OMAP3: Add pin mux, clock and cpu headers
Dirk Behme
- [U-Boot] [PATCH 01/15] Added initial eNET board support
Graeme Russ
- [U-Boot] [PATCH 02/11] mpc8641hpcn: Set up outbound pci windows before inbound
Becky Bruce
- [U-Boot] [PATCH 02/15 v6] OMAP3: Add OMAP3, memory and function prototype headers
Dirk Behme
- [U-Boot] [PATCH 02/15] Renamed cpu/i386/reset.S to resetvec.S
Graeme Russ
- [U-Boot] [PATCH 03/11] drivers/pci: Create pci_map_bar function
Becky Bruce
- [U-Boot] [PATCH 03/15 v6] OMAP3: Add common cpu and start code
Dirk Behme
- [U-Boot] [PATCH 03/15] Updated eNET link script for reset -> resetvec section rename
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 03/15] Updated eNET link script for reset -> resetvec section rename
Graeme Russ
- [U-Boot] [PATCH 04/11] powerpc: Move duplicated BAT defines to mmu.h
Becky Bruce
- [U-Boot] [PATCH 04/15 v6] OMAP3: Add common clock, memory and low level code
Dirk Behme
- [U-Boot] [PATCH 04/15] Moved sc520 specific code into new cpu/i386/sc520 folder
Graeme Russ
- [U-Boot] [PATCH 05/11] lib_generic/addr_map: Change size to phys_size_t from ulong
Becky Bruce
- [U-Boot] [PATCH 05/11] lib_generic/addr_map: Change size to phys_size_t from ulong
Kumar Gala
- [U-Boot] [PATCH 05/15 v6] OMAP3: Add common board, interrupt and system info
Dirk Behme
- [U-Boot] [PATCH 05/15] Moved definition of set_vector() to new header file
Graeme Russ
- [U-Boot] [PATCH 06/11] mpc86xx: Add support to populate addr map based on BATs
Becky Bruce
- [U-Boot] [PATCH 06/15 v6] OMAP3: Add NAND support
Dirk Behme
- [U-Boot] [PATCH 06/15 v6] OMAP3: Add NAND support
Scott Wood
- [U-Boot] [PATCH 06/15] Moved generic (triple fault) reset code
Graeme Russ
- [U-Boot] [PATCH 07/11] flash/cfi_flash: Use virtual sector start address, not phys
Becky Bruce
- [U-Boot] [PATCH 07/15 v6] OMAP3: Add MMC support
Dirk Behme
- [U-Boot] [PATCH 07/15] Added MMCR reset functionality
Graeme Russ
- [U-Boot] [PATCH 08/11] mpc8641hpcn: Clean up PCI mapping concepts
Becky Bruce
- [U-Boot] [PATCH 08/15 v6] OMAP3: Add I2C support
Dirk Behme
- [U-Boot] [PATCH 08/15] Remove #ifdef CONFIG_SC520 in source code
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 08/15] Remove #ifdef CONFIG_SC520 in source code
Graeme Russ
- [U-Boot] [PATCH 09/11] MPC8641HPCN: Enable CONFIG_ADDR_MAP
Becky Bruce
- [U-Boot] [PATCH 09/15 v6] OMAP3: Add Beagle board and common power code
Dirk Behme
- [U-Boot] [PATCH 09/15] Removed all references to CONFIG_SYS_RESET_GENERIC
Graeme Russ
- [U-Boot] [PATCH 1/1] jffs2: Fix zero sector_size when not using CONFIG_JFFS2_CMDLINE
Tomasz Figa
- [U-Boot] [PATCH 1/1] Make FAT code comply to coding rules.
Remy Böhmer
- [U-Boot] [PATCH 1/1] Make FAT code comply to coding rules.
Wolfgang Denk
- [U-Boot] [PATCH 1/1] Make FAT code comply to coding rules.
Remy Bohmer
- [U-Boot] [PATCH 1/1] Make FAT code comply to coding rules.
Wolfgang Denk
- [U-Boot] [PATCH 1/1] ppc4xx: Autocalibration can set RDCC to over aggressive value.
Wolfgang Denk
- [U-Boot] [PATCH 1/1] ppc4xx: Autocalibration can set RDCC to over aggressive value.
Adam Graham
- [U-Boot] [PATCH 1/1] qemu_mips: update doc to generate and to use qemu flash, ide file
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 1/1] qemu_mips: update doc to generate and to use qemu flash, ide file
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 1/1] qemu_mips: update doc to generate and to use qemu flash, ide file
Shinya Kuribayashi
- [U-Boot] [PATCH 1/1] qemu_mips: update doc to generate and to use qemu flash, ide file
Shinya Kuribayashi
- [U-Boot] [PATCH 1/2 V2] at91rm9200: rename lowlevel init value to CONFIG_SYS_
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 1/2 V2] at91rm9200: rename lowlevel init value to CONFIG_SYS_
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 1/2 V2] at91rm9200: rename lowlevel init value to CONFIG_SYS_
Wolfgang Denk
- [U-Boot] [PATCH 1/2 V2] at91rm9200: rename lowlevel init value to CONFIG_SYS_
Wolfgang Denk
- [U-Boot] [PATCH 1/2 V2] at91rm9200: rename lowlevel init value to CONFIG_SYS_
Wolfgang Denk
- [U-Boot] [PATCH 1/2 V2] at91rm9200: rename lowlevel init value to CONFIG_SYS_
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 1/2 V2] cmd_i2c: rename EDO, DDR and SDRAM to avoid conflict with at91 memory setup
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 1/2 V2] cmd_i2c: rename EDO, DDR and SDRAM to avoid conflict with at91 memory setup
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 1/2 V2] cmd_i2c: rename EDO, DDR and SDRAM to avoid conflict with at91 memory setup
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 1/2 V2] cmd_i2c: rename EDO, DDR and SDRAM to avoid conflict with at91 memory setup
Wolfgang Denk
- [U-Boot] [PATCH 1/2 V2] cmd_i2c: rename EDO, DDR and SDRAM to avoid conflict with at91 memory setup
Wolfgang Denk
- [U-Boot] [PATCH 1/2 V3] IOMUX: Add console multiplexing support.
Wolfgang Denk
- [U-Boot] [PATCH 1/2]
Steven A. Falco
- [U-Boot] [PATCH 1/2]
Ben Warren
- [U-Boot] [PATCH 1/2] 85xx: seperate PIXIS virtual from physical address
Jon Loeliger
- [U-Boot] [PATCH 1/2] 85xx: seperate PIXIS virtual from physical address
Kumar Gala
- [U-Boot] [PATCH 1/2] 85xx: seperate PIXIS virtual from physical address
Kumar Gala
- [U-Boot] [PATCH 1/2] 85xx: seperate PIXIS virtual from physical address
Becky Bruce
- [U-Boot] [PATCH 1/2] CFI: avoid redundant function call in single word programming mode
Jens Gehrlein
- [U-Boot] [PATCH 1/2] cmd_i2c: rename EDO, DDR and SDRAM to avoid conflict with at91 memory setup
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 1/2] cmd_i2c: rename EDO, DDR and SDRAM to avoid conflict with at91 memory setup
Wolfgang Denk
- [U-Boot] [PATCH 1/2] Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.c
Wolfgang Denk
- [U-Boot] [PATCH v2 1/2] net: Define IP flag field values
Peter Tyser
- [U-Boot] [PATCH 1/2] ppc4xx: Fix Ethernet PHY LED configuration on PMC440 boards
Matthias Fuchs
- [U-Boot] [PATCH 1/2] qemu_mips: move env storage just after u-boot
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 1/2] sh: lowlevel_init coding style cleanup
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 1/2] smc911x: split out useful defines/functions into local header
Mike Frysinger
- [U-Boot] [PATCH 1/2] XPedite5200 board support cleanup
Peter Tyser
- [U-Boot] [PATCH 1/2] XPedite5200 board support cleanup
Andy Fleming
- [U-Boot] [PATCH 1/2] XPedite5200 board support cleanup
Peter Tyser
- [U-Boot] [PATCH 1/2][RESEND] Add an SPI driver for PPC440EPx
Steven A. Falco
- [U-Boot] [PATCH 1/2][RESEND] Add an SPI driver for PPC440EPx
Ben Warren
- [U-Boot] [PATCH 1/2][RESEND] Add an SPI driver for PPC440EPx
Stefan Roese
- [U-Boot] [PATCH 1/2][RESEND] Add an SPI driver for PPC440EPx
Wolfgang Denk
- [U-Boot] [PATCH 1/3] 85xx: Add support to populate addr map based on TLB settings
Kumar Gala
- [U-Boot] [PATCH 1/3] 85xx: Fix the boot window issue
Dave Liu
- [U-Boot] [PATCH 1/3] Bad block support for environment variables partition in OneNAND
Rohit Hagargundgi
- [U-Boot] [PATCH 1/3] sbc8548: don't enable the 3rd and 4th eTSEC
Paul Gortmaker
- [U-Boot] [PATCH 1/4]v2: Document CONFIG_SYS parameters for vxworks
Wolfgang Denk
- [U-Boot] [PATCH 1/5] 85xx: Convert CONFIG_SYS_{PCI*, RIO*}_MEM_BASE to _MEM_BUS for FSL boards
Kumar Gala
- [U-Boot] [PATCH 1/5] Clean up diufb command definitions
Peter Tyser
- [U-Boot] [PATCH 1/5] fsl-ddr: update the bit mask for DDR3 controller
Andy Fleming
- [U-Boot] [PATCH 1/5] fsl-ddr: update the bit mask for DDR3 controller
Andy Fleming
- [U-Boot] [PATCH 1/5] mpc8xxx: LCRR[CLKDIV] is sometimes five bits
Trent Piepho
- [U-Boot] [PATCH 1/6] jffs2: fix searching for latest version in jffs2_1pass_list_inodes()
Wolfgang Denk
- [U-Boot] [PATCH 1/6] usb : musb : Add high speed field in usb_device structure
Thomas Abraham
- [U-Boot] [PATCH 1/6] usb : musb : Add high speed field in usb_device structure
Remy Bohmer
- [U-Boot] [PATCH 1/6] usb : musb : Add high speed field in usb_device structure
Remy Bohmer
- [U-Boot] [PATCH 1/6] usb : musb : Add high speed field in usb_device structure
Abraham, Thomas
- [U-Boot] [PATCH 1/6] usb : musb : Add high speed field in usb_device structure
michael
- [U-Boot] [PATCH 10/11] drivers/block/ahci: Fix pci mapping bug
Becky Bruce
- [U-Boot] [PATCH 10/15 v6] OMAP3: Add Overo board
Dirk Behme
- [U-Boot] [PATCH 10/15] Renamed SC520 configuration options
Graeme Russ
- [U-Boot] [PATCH 11/11] mpc8641hpcn: Change PCI MEM pci bus address
Becky Bruce
- [U-Boot] [PATCH 11/15 v6] OMAP3: Add Pandora support
Dirk Behme
- [U-Boot] [PATCH 11/15] Removed #ifdef CONFIG_SYS_SC520
Graeme Russ
- [U-Boot] [PATCH 11/15] Removed #ifdef CONFIG_SYS_SC520
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 12/15 v6] OMAP3: Add EVM board
Dirk Behme
- [U-Boot] [PATCH 12/15] Fixed CONFIG_SYS_SC520_RESET for eNET board
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 12/15] Fixed CONFIG_SYS_SC520_RESET for eNET board
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 12/15] Fixed CONFIG_SYS_SC520_RESET for eNET board
Graeme Russ
- [U-Boot] [PATCH 12/15] Fixed CONFIG_SYS_SC520_RESET for eNET board
Graeme Russ
- [U-Boot] [PATCH 12/15] Fixed CONFIG_SYS_SC520_RESET for eNET board
Peter Tyser
- [U-Boot] [PATCH 13/15 v6] OMAP3: Add Zoom1 board support
Dirk Behme
- [U-Boot] [PATCH 13/15] Moved ali512x.h from include/asm-i386/ic/ to /include
Graeme Russ
- [U-Boot] [PATCH 14/15 v6] OMAP3: Add Beagle, EVM and Overo configuration
Dirk Behme
- [U-Boot] [PATCH 14/15] Added MMCR initialisation to real mode eNET board initialisation
Graeme Russ
- [U-Boot] [PATCH 15/15 v6] OMAP3: Add Pandora config, main Makefile, README, MAKEALL and MAINTAINERS
Dirk Behme
- [U-Boot] [PATCH 15/15] Seperated exception handling functionality out of interrupts.c
Graeme Russ
- [U-Boot] [PATCH 2/2 V2] m501sk: move to the common memory setup
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 2/2] 85xx: Enable inbound PCI config cycles for X-ES boards cleanup
Peter Tyser
- [U-Boot] [PATCH 2/2] 85xx: seperate FLASH BASE virtual from physical address
Kumar Gala
- [U-Boot] [PATCH 2/2] Add SPI helpers to Sequoia
Steven A. Falco
- [U-Boot] [PATCH 2/2] Add SPI helpers to Sequoia
Wolfgang Denk
- [U-Boot] [PATCH 2/2] CFI: increase performance of function find_sector()
Jens Gehrlein
- [U-Boot] [patch 2/2] Cleanup patch Fat on non standard sector sizedevices
Remy Bohmer
- [U-Boot] [PATCH 2/2] m501sk: move to the common memory setup
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 2/2] Minor changes to allow clean creation of new i386/sc520 boards
Wolfgang Denk
- [U-Boot] [PATCH v2 2/2] net: Add additional IP fragmentation check
Peter Tyser
- [U-Boot] [PATCH 2/2] ppc4xx: Disable EEPROM write access on PMC440 boards
Matthias Fuchs
- [U-Boot] [PATCH 2/2] qemu_mips: update doc to use all disk and boot linux kernel
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 2/2] qemu_mips: update doc to use all disk and boot linux kernel
Shinya Kuribayashi
- [U-Boot] [PATCH 2/2] sh: use write{8,16,32} in all lowlevel_init
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH 2/2] smc911x_eeprom: new example app for managing newer SMC parts
Mike Frysinger
- [U-Boot] [PATCH 2/3] 85xx: Fix the wrong CSIZE mask bit
Dave Liu
- [U-Boot] [PATCH 2/3] 85xx: Fix the wrong CSIZE mask bit
Kumar Gala
- [U-Boot] [PATCH 2/3] 85xx: Fix the wrong CSIZE mask bit
Liu Dave
- [U-Boot] [PATCH 2/3] 85xx: Fix the wrong CSIZE mask bit
Kumar Gala
- [U-Boot] [PATCH 2/3] 85xx: Fix the wrong CSIZE mask bit
Liu Dave
- [U-Boot] [PATCH 2/3] Add partition based OneNAND commands
Rohit Hagargundgi
- [U-Boot] [PATCH 2/3] ppc: Use addrmap in virt_to_phys and map_physmem.
Kumar Gala
- [U-Boot] [PATCH 2/3] sbc8548: use proper PHY address
Paul Gortmaker
- [U-Boot] [PATCH 2/5] 85xx: Convert CONFIG_SYS_PCI*_IO_BASE to _IO_BUS for FSL boards
Kumar Gala
- [U-Boot] [PATCH 2/5] fsl-ddr: clean up the ddr code for DDR3 controller
Andy Fleming
- [U-Boot] [PATCH 2/5] mpc8568: Double local bus clock divider
Trent Piepho
- [U-Boot] [PATCH 2/5] pcs440ep: Clean up led command definition
Peter Tyser
- [U-Boot] [PATCH 2/6] jffs2: add sector_size field to part_info structure
Wolfgang Denk
- [U-Boot] [PATCH 2/6] usb : musb : Adding host controller driver for Mentor USB controller
Thomas Abraham
- [U-Boot] [PATCH 3/3] Create bad block aware partition table
Rohit Hagargundgi
- [U-Boot] [PATCH 3/3] Move the LAW definition to fsl_law.h
Dave Liu
- [U-Boot] [PATCH 3/3] Move the LAW definition to fsl_law.h
Kumar Gala
- [U-Boot] [PATCH 3/3] Move the LAW definition to fsl_law.h
Liu Dave
- [U-Boot] [PATCH 3/3] Move the LAW definition to fsl_law.h
Kumar Gala
- [U-Boot] [PATCH 3/3] Move the LAW definition to fsl_law.h
Liu Dave
- [U-Boot] [PATCH 3/3] NAND FSL elbc: Use virt_to_phys to determine which bank is in use
Kumar Gala
- [U-Boot] [PATCH 3/3] sbc8548: enable command line editing by default.
Paul Gortmaker
- [U-Boot] [PATCH 3/4]v2: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters
Wolfgang Denk
- [U-Boot] [PATCH 3/4]v2: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters
Wolfgang Denk
- [U-Boot] [PATCH 3/5] 85xx: Use CONFIG_SYS_{PCI*, RIO*}_MEM_PHYS for physical address on FSL boards
Kumar Gala
- [U-Boot] [PATCH 3/5] fsl-ddr: make the self refresh idle threshold configurable
Andy Fleming
- [U-Boot] [PATCH 3/5] mpc86xx: Double local bus clock divider
Trent Piepho
- [U-Boot] [PATCH 3/5] Standardize command usage messages with cmd_usage()
Peter Tyser
- [U-Boot] [PATCH 3/6] jffs2: rewrite jffs2 scanning code based on Linux one
Wolfgang Denk
- [U-Boot] [PATCH 3/6] jffs2: rewrite jffs2 scanning code based on Linux one
Stefan Roese
- [U-Boot] [PATCH 3/6] jffs2: rewrite jffs2 scanning code based on Linux one
Ilya Yanok
- [U-Boot] [PATCH 3/6] usb : musb : Adding USB VBUS enable functionality for DM644x DVEVM
Thomas Abraham
- [U-Boot] [PATCH 4/4]v2: Use new CONFIG_SYS_VXWORKS parameters for Netstal boards
Wolfgang Denk
- [U-Boot] [PATCH 4/5] 85xx: Introduce CONFIG_SYS_PCI*_MEM_VIRT for FSL boards
Kumar Gala
- [U-Boot] [PATCH 4/5] amcc: Clean up command usage output
Peter Tyser
- [U-Boot] [PATCH 4/5] fsl-ddr: use the 1T timing as default configuration
Andy Fleming
- [U-Boot] [PATCH 4/5] mpc8[56]xx: Put localbus clock in sysinfo and gd
Trent Piepho
- [U-Boot] [PATCH 4/6] jffs2: add buffer to cache flash accesses
Wolfgang Denk
- [U-Boot] [PATCH 4/6] usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support
Thomas Abraham
- [U-Boot] [PATCH 5/5] 85xx: enable the auto self refresh for wake up ARP
Andy Fleming
- [U-Boot] [PATCH 5/5] 85xx: Introduce CONFIG_SYS_PCI*_IO_VIRT for FSL boards
Kumar Gala
- [U-Boot] [PATCH 5/5] Command usage cleanup
Peter Tyser
- [U-Boot] [PATCH 5/5] mpc8[56]xx: Put localbus clock in device tree
Trent Piepho
- [U-Boot] [PATCH 5/6] jffs2: summary support
Wolfgang Denk
- [U-Boot] [PATCH 5/6] usb : musb : Enabling DM6446 (TI DaVinci) USB module power.
Thomas Abraham
- [U-Boot] [PATCH 6/6] jffs2: cache data_crc results
Wolfgang Denk
- [U-Boot] [PATCH 6/6] usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform
Thomas Abraham
- [U-Boot] [PATCH v1] lib_ppc: rework the flush_cache
Dave Liu
- [U-Boot] [PATCH v1] lib_ppc: rework the flush_cache
Wolfgang Denk
- [U-Boot] [PATCH v2 0/2] net: Additional IP fragmentation check
Peter Tyser
- [U-Boot] [PATCH v2 0/2] net: Additional IP fragmentation check
Ben Warren
- [U-Boot] [PATCH v2 0/4] Flex-OneNAND support
Rohit Hagargundgi
- [U-Boot] [PATCH v2 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC support
Thomas Abraham
- [U-Boot] [PATCH V2 1/1] IXP425: Fixing PCI access
Stefan Althoefer
- [U-Boot] [PATCH V2 1/1] IXP425: Fixing PCI access
Wolfgang Denk
- [U-Boot] [PATCH v2 1/2] net: Define IP flag field values
Peter Tyser
- [U-Boot] [PATCH v2 1/2] ppc4xx: Add 440EPx SPI driver
Steven A. Falco
- [U-Boot] [PATCH v2 1/2] ppc4xx: Add 440EPx SPI driver
Stefan Roese
- [U-Boot] [PATCH v2 1/2] ppc4xx: Add 440EPx SPI driver
Stefan Roese
- [U-Boot] [PATCH v2 1/2] ppc4xx: Add 440EPx SPI driver
Wolfgang Denk
- [U-Boot] [PATCH v2 1/2] ppc4xx: Add 440EPx SPI driver
Ben Warren
- [U-Boot] [PATCH v2 1/2] ppc4xx: Add 440EPx SPI driver
Stefan Roese
- [U-Boot] [PATCH v2 1/4] Flex-OneNAND driver
Rohit Hagargundgi
- [U-Boot] [PATCH v2 1/4] Flex-OneNAND driver
Scott Wood
- [U-Boot] [PATCH v2 1/6] usb : musb : Record speed of high speed devices connected to hub
Thomas Abraham
- [U-Boot] [PATCH v2 1/6] usb : musb : Record speed of high speed devices connected to hub
Gupta, Ajay Kumar
- [U-Boot] [PATCH v2 2/2] net: Add additional IP fragmentation check
Peter Tyser
- [U-Boot] [PATCH v2 2/2] ppc4xx: Add SPI helper routines for the 440EPX
Steven A. Falco
- [U-Boot] [PATCH v2 2/2] ppc4xx: Add SPI helper routines for the 440EPX
Stefan Roese
- [U-Boot] [PATCH v2 2/2] XPedite5200 board support
Jon Loeliger
- [U-Boot] [PATCH v2 2/4] Environment support for Flex-OneNAND
Rohit Hagargundgi
- [U-Boot] [PATCH v2 2/6] usb : musb : Adding host controller driver for Mentor USB controller
Bryan Wu
- [U-Boot] [PATCH v2 2/6] usb : musb : Adding host controller driver for Mentor USB controller
Thomas Abraham
- [U-Boot] [PATCH v2 3/4] JFFS2 commands support for Flex-OneNAND
Rohit Hagargundgi
- [U-Boot] [PATCH v2 3/6] usb : musb : Adding USB VBUS enable functionality for DM644x DVEVM
Thomas Abraham
- [U-Boot] [PATCH v2 4/4] Flex-OneNAND boundary setting command
Rohit Hagargundgi
- [U-Boot] [PATCH v2 4/6] usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support
Thomas Abraham
- [U-Boot] [PATCH v2 5/6] usb : musb : Enabling DM6446 (TI DaVinci) USB module power
Thomas Abraham
- [U-Boot] [PATCH v2 6/6] usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform
Thomas Abraham
- [U-Boot] [PATCH V2 Inc1] IXP425: Fixing PCI access
Stefan Althoefer
- [U-Boot] [PATCH v2] Add secondary CPUs processor frequency for e500 core
Haiying Wang
- [U-Boot] [PATCH v2] Add support for boards where the NOR FLASH is not memory-mapped
Scott Wood
- [U-Boot] [PATCH v2] Add support for boards where the NOR FLASH is not memory-mapped
Stefan Roese
- [U-Boot] [PATCH v2] Add support for boards where the NOR FLASH is not memory-mapped
Stefan Roese
- [U-Boot] [PATCH v2] common: Iteration limit for memory test.
Dirk Eibach
- [U-Boot] [PATCH v2] common: Iteration limit for memory test.
Wolfgang Denk
- [U-Boot] [PATCH v2] easylogo: add optional gzip support
Mike Frysinger
- [U-Boot] [PATCH v2] easylogo: add optional gzip support
Wolfgang Denk
- [U-Boot] [PATCH v2] easylogo: add optional gzip support
Mike Frysinger
- [U-Boot] [PATCH V2] FPGA: move fpga drivers to drivers/fpga
Wolfgang Denk
- [U-Boot] [PATCH v2] mgcoge make ether_scc.c work with CONFIG_NET_MULTI
Wolfgang Denk
- [U-Boot] [PATCH v2] mgcoge make ether_scc.c work with CONFIG_NET_MULTI
Wolfgang Denk
- [U-Boot] [PATCH v2] mgcoge make ether_scc.c work with CONFIG_NET_MULTI
Ben Warren
- [U-Boot] [PATCH v2] mgcoge make ether_scc.c work with CONFIG_NET_MULTI
Gary Jennejohn
- [U-Boot] [PATCH v2] nand: Fix cache and memory inconsistent issue
Scott Wood
- [U-Boot] [PATCH v2] nand: Fix cache and memory inconsistent issue
Stefan Roese
- [U-Boot] [PATCH v2] nand: Fix cache and memory inconsistent issue
Liu Dave
- [U-Boot] [PATCH v2] net: Fix TftpStart() ip:filename bug
Peter Tyser
- [U-Boot] [PATCH v2] net: Fix TftpStart() ip:filename bug
Ben Warren
- [U-Boot] [PATCH v2] ppc4xx: Add GDsys PowerPC 440 ETX board support.
Wolfgang Denk
- [U-Boot] [PATCH v2] ppc4xx: Add GDsys PowerPC 440 ETX board support.
Dirk Eibach
- [U-Boot] [PATCH v2] ppc4xx: Improve DDR autodetect
Dirk Eibach
- [U-Boot] [PATCH v2] ppc4xx: Improve DDR autodetect
Stefan Roese
- [U-Boot] [PATCH V2] ppc4xx: Update TEXT_BASE for CPCI405 boards
Matthias Fuchs
- [U-Boot] [PATCH V2] qemu_mips: move env storage just after u-boot
Shinya Kuribayashi
- [U-Boot] [PATCH v2] Remove unused CONFIG_ADDR_STREAMING defines
Peter Tyser
- [U-Boot] [PATCH v2] Remove unused CONFIG_ADDR_STREAMING defines
Wolfgang Denk
- [U-Boot] [PATCH v2] SATA: do not auto-initialize during boot
Mike Frysinger
- [U-Boot] [PATCH v2] SATA: do not auto-initialize during boot
Kumar Gala
- [U-Boot] [PATCH v2] tools/mkimage: ignore trailing garbage
Peter Korsgaard
- [U-Boot] [PATCH v2] tools/mkimage: ignore trailing garbage
Wolfgang Denk
- [U-Boot] [PATCH v2] tools/mkimage: use lseek rather than fstat for file size for -l option
Wolfgang Denk
- [U-Boot] [PATCH v2] tools/mkimage: use lseek rather than fstat for file size for -l option
Peter Korsgaard
- [U-Boot] [PATCH v2] tools/mkimage: use lseek rather than fstat for file size for -l option
Peter Korsgaard
- [U-Boot] [PATCH v2] UBI: Enable re-initializing of the "ubi part" command
Stefan Roese
- [U-Boot] [PATCH v2] UBI: Return -ENOMEM upon failing malloc
Stefan Roese
- [U-Boot] [PATCH V2] usbtty/omap: update to current API
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH V2] usbtty/omap: update to current API
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH V2] usbtty/omap: update to current API
Remy Bohmer
- [U-Boot] [PATCH V2] usbtty/omap: update to current API
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH V2] usbtty/omap: update to current API
Remy Bohmer
- [U-Boot] [PATCH v3 0/2] 85xx: Support for XPedite5200
Peter Tyser
- [U-Boot] [PATCH v3 1/2] 85xx: Add PORDEVSR_PCI1 define
Peter Tyser
- [U-Boot] [PATCH v3 1/2] 85xx: Add PORDEVSR_PCI1 define
Andy Fleming
- [U-Boot] [PATCH v3 1/2] ppc4xx: Add PPC4xx SPI driver
Steven A. Falco
- [U-Boot] [PATCH v3 1/2] ppc4xx: Add PPC4xx SPI driver
Wolfgang Denk
- [U-Boot] [PATCH v3 1/2] ppc4xx: Add PPC4xx SPI driver
Stefan Roese
- [U-Boot] [PATCH v3 1/2] ppc4xx: Add PPC4xx SPI driver
Wolfgang Denk
- [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia
Wolfgang Denk
- [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia
Ben Warren
- [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia
Steven A. Falco
- [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia
Wolfgang Denk
- [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia
Steven A. Falco
- [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia
Ben Warren
- [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia
Stefan Roese
- [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia
Wolfgang Denk
- [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia
Wolfgang Denk
- [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia
Steven A. Falco
- [U-Boot] [PATCH v3 2/2] ppc4xx: Add PPC4xx SPI helpers to Sequoia
Steven A. Falco
- [U-Boot] [PATCH v3 2/2] XPedite5200 board support
Peter Tyser
- [U-Boot] [PATCH v3 2/2] XPedite5200 board support
Jon Loeliger
- [U-Boot] [PATCH v3 2/2] XPedite5200 board support
Peter Tyser
- [U-Boot] [PATCH v3 2/2] XPedite5200 board support
Jon Loeliger
- [U-Boot] [PATCH v3] Add support for boards where the NOR FLASH is not memory-mapped
Stefan Roese
- [U-Boot] [PATCH V3] cmd_bdinfo: move implementation to arch instead of common
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH v3] common: Iteration limit for memory test.
Dirk Eibach
- [U-Boot] [PATCH v3] easylogo: add optional gzip support
Mike Frysinger
- [U-Boot] [PATCH v3] easylogo: add optional gzip support
Wolfgang Denk
- [U-Boot] [PATCH V3] Fix FIT and fdt blob support to have CONFIG_OF_LIBFDT and CONFIG_FIT independant
Kumar Gala
- [U-Boot] [PATCH V3] Fix FIT and fdt blob support to have CONFIG_OF_LIBFDT and CONFIG_FIT independant
Wolfgang Denk
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
Timur Tabi
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
Wolfgang Denk
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
Scott Wood
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
Wolfgang Denk
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
Wolfgang Denk
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
Wolfgang Denk
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
ksi at koi8.net
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
Timur Tabi
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
ksi at koi8.net
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
Timur Tabi
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
ksi at koi8.net
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
ksi at koi8.net
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
Timur Tabi
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
ksi at koi8.net
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
Jerry Van Baren
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
Timur Tabi
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
ksi at koi8.net
- [U-Boot] [PATCH v3] i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
ksi at koi8.net
- [U-Boot] [PATCH v3] nand: Fix cache and memory inconsistent issue
Stefan Roese
- [U-Boot] [PATCH v3] nand: Fix cache and memory inconsistent issue
Scott Wood
- [U-Boot] [PATCH v3] nand: Fix cache and memory inconsistent issue
Dave Liu
- [U-Boot] [PATCH v3] ppc4xx: Add GDsys PowerPC 440 ETX board support.
Stefan Roese
- [U-Boot] [PATCH v3] ppc4xx: Add GDsys PowerPC 440 ETX board support.
Dirk Eibach
- [U-Boot] [PATCH v3] ppc4xx: Improve DDR autodetect
Dirk Eibach
- [U-Boot] [PATCH v3] SATA: do not auto-initialize during boot
Mike Frysinger
- [U-Boot] [PATCH V3] SH7750/51: add register BCR3, BCR4, PCR, RTCOR, RTCNT, RTCSR, SDMR2, SDMR3 and fix BCR2 support
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH V3] SH7750/51: add register BCR3, BCR4, PCR, RTCOR, RTCNT, RTCSR, SDMR2, SDMR3 and fix BCR2 support
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH v5 0/3]Support for XPedite5370 and misc GPIO
Peter Tyser
- [U-Boot] [PATCH v5 1/3] Add support for PCA953x I2C gpio devices
Peter Tyser
- [U-Boot] [PATCH v4 1/4] Introduce virt_to_phys()
Kumar Gala
- [U-Boot] [PATCH v4 1/4] Introduce virt_to_phys()
Wolfgang Denk
- [U-Boot] [PATCH v4 1/4] Introduce virt_to_phys()
Haavard Skinnemoen
- [U-Boot] [PATCH v4 1/4] Introduce virt_to_phys()
Kumar Gala
- [U-Boot] [PATCH v4 1/4] Introduce virt_to_phys()
Haavard Skinnemoen
- [U-Boot] [PATCH v4 1/4] Introduce virt_to_phys()
Kumar Gala
- [U-Boot] [PATCH v4 1/4] Introduce virt_to_phys()
Haavard Skinnemoen
- [U-Boot] [PATCH v4 2/3] Add support for Maxim's DS4510 I2C device
Wolfgang Denk
- [U-Boot] [PATCH v5 2/3] Add support for Maxim's DS4510 I2C device
Peter Tyser
- [U-Boot] [PATCH v4 2/3] Add support for Maxim's DS4510 I2C device
Peter Tyser
- [U-Boot] [PATCH v4 2/4] Introduce addr_map library
Kumar Gala
- [U-Boot] [PATCH v4 2/4] Introduce addr_map library
Wolfgang Denk
- [U-Boot] [PATCH v4 2/4] Introduce addr_map library
Kumar Gala
- [U-Boot] [PATCH v4 2/4] Introduce addr_map library
Wolfgang Denk
- [U-Boot] [PATCH v4 2/4] Introduce addr_map library
Becky Bruce
- [U-Boot] [PATCH v4 2/4] Introduce addr_map library
Wolfgang Denk
- [U-Boot] [PATCH v5 3/3] XPedite5370 board support
Peter Tyser
- [U-Boot] [PATCH v4 3/3] XPedite5370 board support
Andy Fleming
- [U-Boot] [PATCH v4 3/3] XPedite5370 board support
Peter Tyser
- [U-Boot] [PATCH v4 3/4] 85xx: Add support to populate addr map based on TLB settings
Kumar Gala
- [U-Boot] [PATCH v4 4/4] ppc: Use addrmap in virt_to_phys and map_physmem.
Kumar Gala
- [U-Boot] [PATCH v4] Add support for boards where the NOR FLASH is not memory-mapped
Stefan Roese
- [U-Boot] [PATCH V4] cmd_bdinfo: move implementation to arch instead of common
Joakim Tjernlund
- [U-Boot] [PATCH V4] cmd_bdinfo: move implementation to arch instead of common
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH v4] easylogo: add optional gzip support
Mike Frysinger
- [U-Boot] [PATCH v4] ppc4xx: Add GDsys PowerPC 440 ETX board support.
Stefan Roese
- [U-Boot] [PATCH v4] ppc4xx: Add GDsys PowerPC 440 ETX board support.
Dirk Eibach
- [U-Boot] [PATCH v5 0/3]Support for XPedite5370 and misc GPIO
Peter Tyser
- [U-Boot] [PATCH v5 1/3] Add support for PCA953x I2C gpio devices
Peter Tyser
- [U-Boot] [PATCH v5 2/3] Add support for Maxim's DS4510 I2C device
Peter Tyser
- [U-Boot] [PATCH v5 3/3] XPedite5370 board support
Peter Tyser
- [U-Boot] [PATCH v5] ppc4xx: Add GDsys PowerPC 440 ETX board support.
Stefan Roese
- [U-Boot] [PATCH v5] ppc4xx: Add GDsys PowerPC 440 ETX board support.
Stefan Roese
- [U-Boot] [PATCH v5] ppc4xx: Add GDsys PowerPC 440 ETX board support.
Dirk Eibach
- [U-Boot] [PATCH v5] ppc4xx: Add GDsys PowerPC 440 ETX board support.
Eibach, Dirk
- [U-Boot] [PATCH v5] Update U-Boot's build timestamp on every compile
Wolfgang Denk
- [U-Boot] [PATCH v5] Update U-Boot's build timestamp on every compile
Wolfgang Denk
- [U-Boot] [PATCH v6 0/3] Support for XPedite5370 and misc GPIO
Peter Tyser
- [U-Boot] [PATCH v6 1/3] Add support for PCA953x I2C gpio devices
Peter Tyser
- [U-Boot] [PATCH v6 2/3] Add support for Maxim's DS4510 I2C device
Peter Tyser
- [U-Boot] [PATCH v6 3/3] XPedite5370 board support
Peter Tyser
- [U-Boot] [PATCH v6] ppc4xx: Add GDsys PowerPC 440 ETX board support.
Dirk Eibach
- [U-Boot] [PATCH v7] ppc4xx: Add GDsys PowerPC 440 ETX board support.
Stefan Roese
- [U-Boot] [PATCH v7] ppc4xx: Add GDsys PowerPC 440 ETX board support.
Stefan Roese
- [U-Boot] [PATCH v7] ppc4xx: Add GDsys PowerPC 440 ETX board support.
Dirk Eibach
- [U-Boot] [PATCH v7] ppc4xx: Add GDsys PowerPC 440 ETX board support.
Eibach, Dirk
- [U-Boot] [PATCH-OMAP3 1/2] OMAP3: Add Pandora board files
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH-OMAP3 2/2] OMAP3: Add Pandora configuration
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH-OMAP3 2/2] OMAP3: Convert register access to structure style, part #2
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH-OMAP3] OMAP3: Check for MMC card
Dirk Behme
- [U-Boot] [PATCH-OMAP3] OMAP3: Check for MMC card
Jason Kridner
- [U-Boot] [PATCH-OMAP3] OMAP3: Check for MMC card
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH-OMAP3] OMAP3: Check for MMC card
Dirk Behme
- [U-Boot] [PATCH-OMAP3] OMAP3: Enable command parser and add boot scripting
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH-OMAP3] OMAP3: Enable command parser and add boot scripting
Jason Kridner
- [U-Boot] [PATCH-OMAP3] OMAP3: Enable command parser and add boot scripting
Dirk Behme
- [U-Boot] [PATCH] 85xx: Add CPU 2 errata workaround to all 8548 boards
Andy Fleming
- [U-Boot] [PATCH] 85xx: socrates: fix DDR SDRAM tlb entry configuration
Andy Fleming
- [U-Boot] [PATCH] [ONENAND] Reduce OneNAND IPL code size v2
Scott Wood
- [U-Boot] [PATCH] [ONENAND] Reduce OneNAND IPL code size v2
Kyungmin Park
- [U-Boot] [PATCH] [ONENAND] Reduce OneNAND IPL code size v2
Scott Wood
- [U-Boot] [PATCH] [update] Fix up rsk7203 target for out of tree build
Kieran Bingham
- [U-Boot] [PATCH] Add AMD 29LV160DB FLASH support to SBC-2410A board.
Daniel Schuler
- [U-Boot] [PATCH] Add AMD 29LV160DB FLASH support to SBC2410 board.
Daniel Schuler
- [U-Boot] [PATCH] Add README file for MPC8572DS board
Andy Fleming
- [U-Boot] [PATCH] Add secondary CPUs processor frequency for e500 core
Haiying Wang
- [U-Boot] [PATCH] Add support for boards where the NOR FLASH is not memory-mapped
Wolfgang Denk
- [U-Boot] [PATCH] Add support for boards where the NOR FLASH is not memory-mapped
Stefan Roese
- [U-Boot] [PATCH] add support for Toradex Colibri PXA300 module
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] add support for Toradex Colibri PXA300 module
Daniel Mack
- [U-Boot] [PATCH] Added legacy flash ST Micro M29W040B
Niklaus Giger
- [U-Boot] [PATCH] Added optional iteration limit for alternative memory test.
Wolfgang Denk
- [U-Boot] [PATCH] Added support for the Guntermann & Drunck PowerPC 440 EP/GR ETX module.
Jon Loeliger
- [U-Boot] [PATCH] Added support for the Guntermann & Drunck PowerPC 440 EP/GR ETX module.
Matthias Fuchs
- [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1
michael
- [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1
michael
- [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1
michael
- [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] ARM: Allow cross endian linux boot Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] ARM: Allow cross endian linux boot Part 1/1
Wolfgang Denk
- [U-Boot] [PATCH] at91: add at91sam9xeek board support
Nicolas Ferre
- [U-Boot] [PATCH] at91: add at91sam9xeek board support (typo)
Nicolas Ferre
- [U-Boot] [PATCH] at91: Choose environment variables location within make config target
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] at91: Fix Atmel's at91sam9 boards out of tree build
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] at91: Fix Choose environment variables location out of tree build
Wolfgang Denk
- [U-Boot] [PATCH] at91: Fix Choose environment variables location out of tree build
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] AT91: remove non supported board AT91RM9200DF macro
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] at91rm9200dk: Fix typo
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] avr32/bootm: remove unused variable 'ret'
Wolfgang Denk
- [U-Boot] [PATCH] avr32/bootm: remove unused variable 'ret'
Wolfgang Denk
- [U-Boot] [PATCH] avr32/cmd_bdinfo: fix printf() format warnings
Wolfgang Denk
- [U-Boot] [PATCH] Blackfin: fix linker scripts to work with --gc-sections
Mike Frysinger
- [U-Boot] [PATCH] board/trab/memory.c: Fix compile problems.
Wolfgang Denk
- [U-Boot] [PATCH] bugfix for i.mx31 CCM_UPCTL reg
Maxim Artamonov
- [U-Boot] [PATCH] bugfix for i.mx31 CCM_UPCTL reg
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] cmd_elf: CONFIG_ELF_SIMPLE_LOAD: load ELFs according to PHDRs
Wolfgang Denk
- [U-Boot] [PATCH] cmd_elf: CONFIG_ELF_SIMPLE_LOAD: load ELFs according to PHDRs
Mike Frysinger
- [U-Boot] [PATCH] cmd_elf: CONFIG_ELF_SIMPLE_LOAD: load ELFs according to PHDRs
Wolfgang Denk
- [U-Boot] [PATCH] cmd_mem: Remove unused variable
Wolfgang Denk
- [U-Boot] [PATCH] cmd_sf: rename "speed" to "hz"
Mike Frysinger
- [U-Boot] [PATCH] cmd_sf: rename "speed" to "hz"
Wolfgang Denk
- [U-Boot] [PATCH] cmd_sf: rename "speed" to "hz"
Mike Frysinger
- [U-Boot] [PATCH] cmd_sf: rename "speed" to "hz"
Wolfgang Denk
- [U-Boot] [PATCH] cmd_sf: rename "speed" to "hz"
Jerry Van Baren
- [U-Boot] [PATCH] cmd_sf: rename "speed" to "hz"
Mike Frysinger
- [U-Boot] [PATCH] Coldfire: XL Bus minor fixes
arun c
- [U-Boot] [PATCH] common/cmd_ide.c: Corrected endian order printing for compact flash serial number.
Wolfgang Denk
- [U-Boot] [PATCH] common/main: support bootdelay=0 for CONFIG_AUTOBOOT_KEYED
Peter Korsgaard
- [U-Boot] [PATCH] common/main: support bootdelay=0 for CONFIG_AUTOBOOT_KEYED
Wolfgang Denk
- [U-Boot] [PATCH] common/main: support bootdelay=0 for CONFIG_AUTOBOOT_KEYED
Peter Korsgaard
- [U-Boot] [PATCH] common: Iteration limit for memory test.
Dirk Eibach
- [U-Boot] [PATCH] common: Iteration limit for memory test.
Wolfgang Denk
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Wolfgang Denk
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Wolfgang Denk
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Wolfgang Denk
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Wolfgang Denk
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Wolfgang Denk
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Wolfgang Denk
- [PATCH] common: nvedit to protect additional ethernet addresses
Stefan Althoefer
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
stefan.althoefer at web.de
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Jerry Van Baren
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Ben Warren
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Stefan Althöfer
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Jerry Van Baren
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Ben Warren
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Jerry Van Baren
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Ben Warren
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Jerry Van Baren
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Wolfgang Denk
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Ben Warren
- [U-Boot] [PATCH] common: nvedit to protect additional ethernet addresses Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] drivers/bios_emulator: Move conditional compilation to Makefile
Wolfgang Denk
- [U-Boot] [PATCH] drivers/fsl_pci_init: Fix compile warning
Kumar Gala
- [U-Boot] [PATCH] drivers/fsl_pci_init: Fix compile warning
Wolfgang Denk
- [U-Boot] [PATCH] drivers/fsl_pci_init: Fix inbound window mapping bug
Andy Fleming
- [U-Boot] [PATCH] drivers/net/ax88796.h revised
Ben Warren
- [U-Boot] [PATCH] drivers/net/e1000.c: missing terminator for supported devices
Stefan Althoefer
- [U-Boot] [PATCH] drivers/net/e1000.c: missing terminator for supported devices
Stefan Althoefer
- [U-Boot] [PATCH] easylogo: add optional gzip support
Mike Frysinger
- [U-Boot] [PATCH] easylogo: add optional gzip support
Wolfgang Denk
- [U-Boot] [PATCH] env_sf: support embedded environments
Mike Frysinger
- [U-Boot] [PATCH] env_sf: support embedded environments
Haavard Skinnemoen
- [U-Boot] [PATCH] env_sf: support embedded environments
Wolfgang Denk
- [U-Boot] [PATCH] evb64260: fix "cast to pointer from integer of different size" warnings
Wolfgang Denk
- [U-Boot] [PATCH] fix bmp_logo.h make dependencies to allow parallel build
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] Fix compile error in building MBX860T.
Ben Warren
- [U-Boot] [PATCH] Fix compile error in building MBX860T.
Wolfgang Denk
- [PATCH] Fix EHCI usb. I start to test on a IXP465 board and I find some errors in the code. This patch fix: - descriptor initizialization (config, interface and endpoint must be one next-to the other when the USB_DT_CONFIG message is send. - FIX little/endian bigendian (introduce the CONFIG_EHCI_DESC_BIG_ENDIAN and the CONFIG_EHCI_MMIO_BIG_ENDIAN) - Introduce the linux version of the usb_config_descriptor and usb_interface descriptor. This descriptor does't contains u-boot extension.
michael
- [U-Boot] [PATCH] Fix new found CFG_
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] Fix new found CFG_
Wolfgang Denk
- [U-Boot] [PATCH] Fix new found CFG_
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] fix some coding style violations.
Ilko Iliev
- [U-Boot] [PATCH] fix some coding style violations.
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] Fix up rsk7203 target for out of tree build
Kieran Bingham
- [U-Boot] [PATCH] Fixed off-by-one errors in lib_m68k/interrupts.c
Graeme Russ
- [U-Boot] [PATCH] FPU POST: fix warnings when building with 2.18 binutils
Yuri Tikhonov
- [U-Boot] [PATCH] fs/fat: handle FAT on SATA
Mike Frysinger
- [U-Boot] [PATCH] fs/fat: handle FAT on SATA
Wolfgang Denk
- [U-Boot] [PATCH] fsl ddr skip interleaving if not supported.
Andy Fleming
- [U-Boot] [PATCH] Hardware diagnosis for inka4x0 boards.
Wolfgang Denk
- [U-Boot] [PATCH] Hardware diagnosis for inka4x0 boards.
Detlev Zundel
- [U-Boot] [PATCH] IDE: Improving speed on reading data Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] IDE: Improving speed on reading data Part 1/1
Wolfgang Denk
- [U-Boot] [PATCH] IDE: Improving speed on reading data Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] ignore .gdb_history files
Wolfgang Denk
- [U-Boot] [patch] Improve progres bar for booting from USB stick.
Remy Bohmer
- [U-Boot] [patch] Improve progres bar for booting from USB stick.
Wolfgang Denk
- [U-Boot] [PATCH] include/configs/at91cap9adk.h: fix typo.
Wolfgang Denk
- [U-Boot] [PATCH] inka4x0: board specific RTC support.
Wolfgang Denk
- [U-Boot] [PATCH] inka4x0: board specific RTC support.
Detlev Zundel
- [U-Boot] [PATCH] inka4x0: hardware diagnosis and RTC.
Wolfgang Denk
- [U-Boot] [PATCH] integratorap: fix PCI support
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] IXP425: Add new IXP425 board emPC-A400 Part 1/2
Stefan Althoefer
- [U-Boot] [PATCH] IXP425: Add new IXP425 board emPC-A400 Part 2/2
Stefan Althoefer
- [U-Boot] [PATCH] IXP425: Changing serial port initialization sequence Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] IXP425: Fixing PCI access Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] IXP425: Fixing PCI access Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] IXP425: Fixing PCI access Part 1/1
Wolfgang Denk
- [U-Boot] [PATCH] IXP425: Fixing PCI access Part 1/1
Wolfgang Denk
- [U-Boot] [PATCH] IXP425: Fixing PCI access Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] IXP425: Fixing timer code Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] IXP425: Fixing timer code Part 1/1
Wolfgang Denk
- [U-Boot] [PATCH] IXP425: Fixing timer code Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] IXP425: Fixing timer code Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] IXP425: Improving print_cpuinfo code Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] IXP425: Improving print_cpuinfo code Part 1/1
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] IXP425: Improving print_cpuinfo code Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] IXP425: Improving print_cpuinfo code Part 1/1
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] IXP425: make cmd_go handle caches correctly Part 1/1
Wolfgang Denk
- [U-Boot] [PATCH] IXP425: make cmd_go handle caches correctly Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] IXP425: make cmd_go handle caches correctly Part 1/1
Stefan Althoefer
- [U-Boot] [PATCH] jffs2: include <linux/mtd/compat.h> instead of defining own min_t
Ilya Yanok
- [U-Boot] [PATCH] jffs2: include <linux/mtd/compat.h> instead of defining own min_t
Stefan Roese
- [U-Boot] [PATCH] jffs2: include <linux/mtd/compat.h> instead of defining own min_t
Wolfgang Denk
- [U-Boot] [PATCH] jffs2: rename devices_init () in common/jffs2.c
Wolfgang Denk
- [U-Boot] [PATCH] keymile add the common parts of the HDLC driver
Wolfgang Denk
- [U-Boot] [PATCH] lcd: Let the board code show board-specific info cleanup
Wolfgang Denk
- [U-Boot] [PATCH] lib_ppc: rework the flush_cache
Dave Liu
- [U-Boot] [PATCH] lib_ppc: rework the flush_cache
Scott Wood
- [U-Boot] [PATCH] lib_ppc: rework the flush_cache
Liu Dave
- [U-Boot] [PATCH] lib_ppc: rework the flush_cache
Scott Wood
- [U-Boot] [PATCH] lib_ppc: rework the flush_cache
Liu Dave
- [U-Boot] [PATCH] lib_ppc: rework the flush_cache
Wolfgang Denk
- [U-Boot] [PATCH] libfdt: Fix redefined uintptr_t warning for USE_HOSTCC
Wolfgang Denk
- [U-Boot] [PATCH] lwmon, tqm8xx: Fix build errors
Wolfgang Denk
- [U-Boot] [patch] make hello world example work for at91sam9261ek and make readme clearer about this
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [patch] make hello world example work for at91sam9261ek and make readme clearer about this
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [patch] make hello world example work for at91sam9261ek and make readme clearer about this
Remy Bohmer
- [U-Boot] [patch] make hello world example work for at91sam9261ek and make readme clearer about this
Wolfgang Denk
- [U-Boot] [patch] make hello world example work for at91sam9261ek and make readme clearer about this
Wolfgang Denk
- [U-Boot] [patch] make hello world example work for at91sam9261ek and make readme clearer about this
Remy Bohmer
- [U-Boot] [PATCH] make make quiet
kenneth johansson
- [U-Boot] [PATCH] make make quiet
Wolfgang Denk
- [U-Boot] [PATCH] make make quiet
kenneth johansson
- [U-Boot] [PATCH] make make quiet
kenneth johansson
- [U-Boot] [PATCH] make make quiet
Wolfgang Denk
- [U-Boot] [PATCH] make make quiet
Wolfgang Denk
- [U-Boot] [PATCH] make make quiet
Scott Wood
- [U-Boot] [PATCH] make make quiet
Wolfgang Denk
- [U-Boot] [PATCH] make make quiet
Mike Frysinger
- [U-Boot] [PATCH] make make quiet
kenneth johansson
- [U-Boot] [PATCH] make make quiet
Mike Frysinger
- [U-Boot] [PATCH] make make quiet
kenneth johansson
- [U-Boot] [PATCH] make make quiet
Mike Frysinger
- [U-Boot] [PATCH] make make quiet
kenneth johansson
- [U-Boot] [PATCH] make make quiet
Wolfgang Denk
- [U-Boot] [PATCH] MAKEALL: Automatically use parallel builds
Wolfgang Denk
- [U-Boot] [PATCH] MAKEALL: Automatically use parallel builds
Mike Frysinger
- [U-Boot] [PATCH] MAKEALL: Automatically use parallel builds
Wolfgang Denk
- [U-Boot] [PATCH] Makefile: fix dependency problem with parallel builds
Wolfgang Denk
- [U-Boot] [PATCH] mgcoge add the board-specific part of the HDLC driver
Wolfgang Denk
- [U-Boot] [PATCH] mgsuvd add the board-specific part of the HDLC driver
Wolfgang Denk
- [U-Boot] [PATCH] MIPS: Add VCT board series support (Part 1/3)
Stefan Roese
- [U-Boot] [PATCH] MIPS: Add VCT board series support (Part 1/3)
Andrew Dyer
- [U-Boot] [PATCH] MIPS: Add VCT board series support (Part 1/3)
Stefan Roese
- [U-Boot] [PATCH] MIPS: Add VCT board series support (Part 2/3)
Stefan Roese
- [U-Boot] [PATCH] MIPS: Add VCT board series support (Part 3/3)
Stefan Roese
- [U-Boot] [PATCH] move ARM Ltd. to verdor dir
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] move ARM Ltd. to verdor dir
Wolfgang Denk
- [U-Boot] [PATCH] mpc83xx: Size optimization of start.S
Ron Madrid
- [U-Boot] [PATCH] mpc83xx: Size optimization of start.S
Jens Gehrlein
- [U-Boot] [PATCH] mpc83xx: Size optimization of start.S
Scott Wood
- [U-Boot] [PATCH] mpc83xx: Size optimization of start.S
Jens Gehrlein
- [U-Boot] [PATCH] mpc85xx shrink boot block page to 1M
Ed Swarthout
- [U-Boot] [PATCH] mpc85xx shrink boot block page to 1M
Liu Dave
- [U-Boot] [PATCH] mpc85xx shrink boot block page to 1M
Liu Dave
- [U-Boot] [PATCH] mpc8610hpcd: Fix PCI mapping concepts
Becky Bruce
- [U-Boot] [PATCH] mtd/dataflash.c: fix a problem with the last partition
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] mtd/dataflash.c: fix a problem with the last partition
Ilko Iliev
- [U-Boot] [PATCH] mtd: SPI Flash: Winbond W25X16/WX2532/WX2564 support
Mike Frysinger
- [U-Boot] [PATCH] MTD:NAND Enable nand lock, unlock feature
Nishanth Menon
- [U-Boot] [PATCH] MTD:NAND Enable nand lock, unlock feature
Scott Wood
- [U-Boot] [PATCH] NAND CMD: Add bad block skipping for nboot
David.Kondrad at onqlegrand.com
- [U-Boot] [PATCH] NAND CMD: Add bad block skipping for nboot
Scott Wood
- [U-Boot] [PATCH] NAND: Mark the BBT as scanned prior to calling scan_bbt.
Scott Wood
- [U-Boot] [PATCH] nand: move board_nand_init to nand.h
Mike Frysinger
- [U-Boot] [PATCH] nand: move board_nand_init to nand.h
Scott Wood
- [PATCH] nandboot with 2k pages
- [U-Boot] [PATCH] ne2000: take MAC address from config if available
Daniel Mack
- [U-Boot] [PATCH] ne2000: take MAC address from config if available
Daniel Mack
- [U-Boot] [PATCH] ne2000: take MAC address from config if available
Wolfgang Denk
- [U-Boot] [PATCH] net/net.c: add get_timer_ms()
Daniel Mack
- [U-Boot] [PATCH] net/net.c: add get_timer_ms()
Wolfgang Denk
- [U-Boot] [PATCH] net/net.c: add get_timer_ms()
Daniel Mack
- [U-Boot] [PATCH] net/net.c: add get_timer_ms()
Wolfgang Denk
- [U-Boot] [PATCH] net/net.c: add get_timer_ms()
Daniel Mack
- [U-Boot] [PATCH] net/net.c: add get_timer_ms()
Wolfgang Denk
- [U-Boot] [PATCH] net/net.c: add get_timer_ms()
Daniel Mack
- [U-Boot] [PATCH] net/net.c: correct timeout function
Daniel Mack
- [U-Boot] [PATCH] net/net.c: correct timeout function
Ben Warren
- [U-Boot] [PATCH] net/net.c: correct timeout function
Daniel Mack
- [U-Boot] [PATCH] net/net.c: correct timeout function
Daniel Mack
- [U-Boot] [PATCH] net/net.c: correct timeout function
Ben Warren
- [U-Boot] [PATCH] net/net.c: correct timeout function
Ben Warren
- [U-Boot] [PATCH] net/net.c: correct timeout function
Wolfgang Denk
- [U-Boot] [PATCH] net/net.c: correct timeout function
Ben Warren
- [U-Boot] [PATCH] net: Fix download command parsing
Peter Tyser
- [U-Boot] [PATCH] net: Fix download command parsing
Ben Warren
- [U-Boot] [PATCH] net: Fix TftpStart() ip:filename bug
Peter Tyser
- [U-Boot] [PATCH] net: tsec: Fix Marvell 88E1121R phy init
Anatolij Gustschin
- [U-Boot] [PATCH] net: tsec: Fix Marvell 88E1121R phy init
Andy Fleming
- [U-Boot] [PATCH] net: tsec: Fix Marvell 88E1121R phy init
Ben Warren
- [U-Boot] [PATCH] NIOS2: Added DE2 board with SD support
ivanchuklist ivanchu
- [U-Boot] [PATCH] OneNAND: Add missing mtd info struct before calling onenand_erase()
Scott Wood
- [U-Boot] [PATCH] OneNAND: Additional sync with 2.6.27
Stefan Roese
- [U-Boot] [PATCH] OneNAND: Additional sync with 2.6.27
Scott Wood
- [U-Boot] [PATCH] OneNAND: Fix compiler warnings
Wolfgang Denk
- [U-Boot] [PATCH] OneNAND: Fix compiler warnings
Kyungmin Park
- [U-Boot] [PATCH] OneNAND: Fix compiler warnings
Stefan Roese
- [U-Boot] [PATCH] OneNAND: Fix compiler warnings
Amit Kumar Sharma
- [U-Boot] [PATCH] OneNAND: Fix compiler warnings
Stefan Roese
- [U-Boot] [PATCH] OneNAND: Fix compiler warnings
Amit Kumar Sharma
- [U-Boot] [PATCH] OneNAND: Fix compiler warnings
Scott Wood
- [U-Boot] [PATCH] OneNAND: Fix compiler warnings
Wolfgang Denk
- [U-Boot] [PATCH] OneNAND: Fix compiler warnings
Kyungmin Park
- [U-Boot] [PATCH] part_efi: Fix partition size calculation due to inclusive ending LBA.
Richard Retanubun
- [U-Boot] [PATCH] POST Make: fix the sub-dir dependencies missing.
Wolfgang Denk
- [U-Boot] [PATCH] POST Make: fix the sub-dir dependencies missing.
Wolfgang Denk
- [U-Boot] [PATCH] post/Makefile: fix dependency problem with parallel builds
Wolfgang Denk
- [U-Boot] [PATCH] ppc4xx: Enable auto RS485 mode on PLU405 boards
Matthias Fuchs
- [U-Boot] [PATCH] ppc4xx: Fix UART baudrate setup by FDT
Matthias Fuchs
- [U-Boot] [PATCH] ppc4xx: Improve DDR autodetect
Dirk Eibach
- [U-Boot] [PATCH] ppc4xx: Remove some features from ALPR to fit into 256k again
Pieter Voorthuijsen
- [U-Boot] [PATCH] ppc4xx: Remove some features from ALPR to fit into 256k again
Stefan Roese
- [U-Boot] [PATCH] ppc4xx: Remove some features from ALPR to fit into 256k again
Stefan Roese
- [U-Boot] [PATCH] ppc4xx: Update TEXT_BASE for CPCI405 boards
Matthias Fuchs
- [U-Boot] [PATCH] ppc4xx: Update TEXT_BASE for CPCI405 boards
Stefan Roese
- [U-Boot] [patch] Print image address the bootm command assumed when it complains about wrong image format.
Wolfgang Denk
- [U-Boot] [patch] Print image address the bootm command assumed when it complains about wrong image format.
Remy Bohmer
- [U-Boot] [PATCH] PXA3xx: fix CKEN[AB]
Daniel Mack
- [U-Boot] [PATCH] pxa: fixing get_timer to return time in miliseconds.
Micha Kalfon
- [U-Boot] [PATCH] r2dplus fix register access
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] r2dplus fix register access
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] r2dplus/lowlevel_init: coding style fix
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] r2dplus/lowlevel_init: coding style fix
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] README: update mailing list name and hits to patch submission.
Wolfgang Denk
- [U-Boot] [PATCH] Remove compiler warning: target CPU does not support interworking
Wolfgang Denk
- [U-Boot] [patch] Remove redundant armv4 flag from arm926ejs compile flags
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [patch] Remove redundant armv4 flag from arm926ejs compile flags
Remy Bohmer
- [U-Boot] [PATCH] Remove unneeded CONFIG_SHELL references
Wolfgang Denk
- [U-Boot] [PATCH] Remove unused CONFIG_ADDR_STREAMING defines
Peter Tyser
- [U-Boot] [PATCH] Removed unused CONFIG_L1_INIT_RAM symbol.
Andy Fleming
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Mike Frysinger
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Kumar Gala
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Kumar Gala
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Mike Frysinger
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Mike Frysinger
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Kumar Gala
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Mike Frysinger
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Scott Wood
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Mike Frysinger
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Scott Wood
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Mike Frysinger
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Scott Wood
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Mike Frysinger
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Wolfgang Denk
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Kumar Gala
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Wolfgang Denk
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Wolfgang Denk
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Wolfgang Denk
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Wolfgang Denk
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Wolfgang Denk
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Mike Frysinger
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Wolfgang Denk
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Kumar Gala
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Scott Wood
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Mike Frysinger
- [U-Boot] [PATCH] SATA: do not auto-initialize during boot
Mike Frysinger
- [U-Boot] [PATCH] saveenv: standardize enablement
Mike Frysinger
- [U-Boot] [PATCH] sbc8641d: Fix PCI mapping concepts
Becky Bruce
- [U-Boot] [PATCH] Section name should be ".data" not "data"
Wolfgang Denk
- [U-Boot] [PATCH] serial: Add vcth UART driver
Wolfgang Denk
- [U-Boot] [PATCH] serial: Rename driver vcth to vct to support other board variants
Stefan Roese
- [U-Boot] [PATCH] Set IVPR to kenrel entry point in second core boot page
Kumar Gala
- [U-Boot] [PATCH] Set IVPR to kenrel entry point in second core boot page
Haiying Wang
- [U-Boot] [PATCH] sh: sh7763rdp: Update sh7763rdp config
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] sh: update sh timer coding style
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] sh: Update sh timer function
Wolfgang Denk
- [U-Boot] [PATCH] sh: Update sh2/sh2a timer
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] sh: update sh2/sh2a timer coding style
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] smc911x_eeprom: new example app for managing newer SMC parts
Wolfgang Denk
- [U-Boot] [PATCH] smc911x_eeprom: new example app for managing newer SMC parts
Mike Frysinger
- [U-Boot] [PATCH] soft_i2c.c add option for repeated start in i2c_read()
Andrew Dyer
- [U-Boot] [PATCH] SPARC: Fixed compiler error introduced by commit c160a9544743e80e8889edb2275538e7764ce334
Wolfgang Denk
- [U-Boot] [PATCH] spi/atmel: add AT45DB321D support
Mike Frysinger
- [U-Boot] [PATCH] spi/stmicro: fix debug() display of cmd
Mike Frysinger
- [U-Boot] [PATCH] spi/stmicro: fix debug() display of cmd
Wolfgang Denk
- [U-Boot] [PATCH] strings: use puts() rather than printf()
Wolfgang Denk
- [PATCH] The ending LBA is inclusive. Hence, the partition size should be ((ending-LBA + 1) - starting-LBA) to get the proper partition size.
Richard Retanubun
- [PATCH] This patch add varius fix to the ehci. - fix ehci_readl, ehci_writel - introduce new define in ehci.h - introduce the handshake function for waiting on a register - fix usb_ehci_fsl with the new HC_LENGTH macro
michael
- [U-Boot] [PATCH] tools/mkimage: ignore trailing garbage
Peter Korsgaard
- [U-Boot] [PATCH] tools/mkimage: use lseek rather than fstat for file size for -l option
Peter Korsgaard
- [U-Boot] [PATCH] tools/mkimage: use lseek rather than fstat for file size for -l option
Thomas De Schampheleire
- [U-Boot] [PATCH] tools/mkimage: use lseek rather than fstat for file size for -l option
Peter Korsgaard
- [U-Boot] [PATCH] tools/mkimage: use lseek rather than fstat for file size for -l option
Wolfgang Denk
- [U-Boot] [PATCH] tools/mkimage: use lseek rather than fstat for file size for -l option
Peter Korsgaard
- [U-Boot] [PATCH] tools/mkimage: use lseek rather than fstat for file size for -l option
Wolfgang Denk
- [U-Boot] [PATCH] tools/mkimage: use lseek rather than fstat for file size for -l option
Peter Korsgaard
- [PATCH] tools/mkimage: use lseek rather than fstat for file size for -l option
Peter Korsgaard
- [U-Boot] [PATCH] tools/netconsole: new script for working with netconsole over UDP
Mike Frysinger
- [U-Boot] [PATCH] tools/netconsole: new script for working with netconsole over UDP
Wolfgang Denk
- [U-Boot] [PATCH] tools/netconsole: new script for working with netconsole over UDP
Mike Frysinger
- [U-Boot] [PATCH] trab: make trab_fkt standalone code independent of libgcc
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] trab: make trab_fkt standalone code independent of libgcc
Wolfgang Denk
- [U-Boot] [PATCH] trab: make trab_fkt standalone code independent of libgcc
Wolfgang Denk
- [U-Boot] [PATCH] tsec: report when there is no vendor specific PHY support.
Andy Fleming
- [U-Boot] [PATCH] tsec: report when there is no vendor specific PHY support.
Paul Gortmaker
- [U-Boot] [PATCH] UBI: Fix size parsing in "ubi create"
Stefan Roese
- [U-Boot] [PATCH] UBI: Return -ENOMEM upon failing malloc
Stefan Roese
- [U-Boot] [PATCH] UBI: Set ubi_dev.type back to DEV_TYPE_NONE upon failing initialization
Stefan Roese
- [U-Boot] [PATCH] USB storage cleanup patch
Michael Trimarchi
- [U-Boot] [PATCH] usb: fix wait_ms declaration
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] usb: fix wait_ms declaration
Wolfgang Denk
- [U-Boot] [PATCH] usb: fix wait_ms declaration
Magnus Lilja
- [U-Boot] [PATCH] usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [PATCH] usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable
Remy Bohmer
- [U-Boot] [PATCH] usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive
Wolfgang Denk
- [U-Boot] [PATCH] usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive
Bryan Wu
- [U-Boot] [PATCH] usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive
Mike Frysinger
- [U-Boot] [PATCH] usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive
Wolfgang Denk
- [U-Boot] [PATCH] usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive
Mike Frysinger
- [U-Boot] [PATCH] usbtty/omap: update to current API
Wolfgang Denk
- [U-Boot] [PATCH] Use bash for default GNU Make shell application
Wolfgang Denk
- [U-Boot] [PATCH] V2 NAND_SPL support for phycore imx31
Maxim Artamonov
- [U-Boot] [PATCH] V2 NAND_SPL support for phycore imx31
Scott Wood
- [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2
Stefan Althoefer
- [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2
Anatolij Gustschin
- [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2
Wolfgang Denk
- [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2
Wolfgang Denk
- [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2
Wolfgang Denk
- [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 2/2
Stefan Althoefer
- [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 2/2
Anatolij Gustschin
- [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2
Stefan Althoefer
- [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2
ksi at koi8.net
- [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2
Stefan Althoefer
- [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2
ksi at koi8.net
- [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2
ksi at koi8.net
- [U-Boot] [PATCH] video: Add new driver for Silicon Motion SM501/SM502 Part 1/2
Anatolij Gustschin
- [U-Boot] [PATCH] video: fix FADS823 and RRvision compiling issues
Wolfgang Denk
- [U-Boot] [PATCH] video: fix FADS823 and RRvision compiling issues
Anatolij Gustschin
- [U-Boot] [PATCH] vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23
Niklaus Giger
- [U-Boot] [PATCH] vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23
Wolfgang Denk
- [U-Boot] [PATCH]: FFS/UFS filesystems support
Wolfgang Denk
- [U-Boot] [PATCH][u-boot-85xx]The 32bit errata fix for 8572 for DDR2 (fwd)
Poonam_Aggrwal-b10812
- [U-Boot] [PPC4xx] Info about emac
Salvatore Lionetti
- [U-Boot] [PPC4xx] Info about emac
Salvatore Lionetti
- [U-Boot] [PPC4xx] Info about emac
Ben Warren
- [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Stefan Roese
- [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
Wolfgang Denk
- [U-Boot] [RESEND][U-Boot-v2][PATCH] imx27: nandboot with 2k page
frederic rodo
- [U-Boot] [RFC USB PATCH 1/3 V3] Prepare USB layer for ehci support
Remy Bohmer
- [U-Boot] [RFC USB PATCH 1/3 V3] Prepare USB layer for ehci support
michael
- [U-Boot] [RFC USB PATCH 1/3 V3] Prepare USB layer for ehci support
Michael Trimarchi
- [U-Boot] [RFC USB PATCH 2/3 V3] USB ehci core support
Michael Trimarchi
- [U-Boot] [RFC USB PATCH 3/3 V3] USB ehci freescale support
Michael Trimarchi
- [U-Boot] [RFC USB PATCH V2] USB ehci fix (truncate problem)
Michael Trimarchi
- [U-Boot] [RFC USB PATCH V2] USB ehci fix (truncate problem)
Remy Bohmer
- [U-Boot] [RFC USB PATCH V2] USB ehci fix and test on ixp4xx hardware
Remy Bohmer
- [U-Boot] [RFC USB PATCH V2] USB ehci fix and test on ixp4xx hardware
michael
- [U-Boot] [RFC USB PATCH V2] USB ehci fix and test on ixp4xx hardware
Michael Trimarchi
- [U-Boot] [RFC USB PATCH] USB ehci fix
Michael Trimarchi
- [U-Boot] [RFC USB PATCH] USB ehci fix and test on ixp4xx?hardware
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [RFC USB PATCH] USB ehci fix and test on ixp4xx hardware
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] [RFC USB PATCH] USB ehci fix and test on ixp4xx hardware
michael
- [U-Boot] [RFC USB PATCH] USB ehci fix and test on ixp4xx hardware
Stefan Roese
- [U-Boot] [RFC USB PATCH] USB ehci fix and test on ixp4xx hardware
Remy Bohmer
- [U-Boot] [RFC USB PATCH] USB ehci fix and test on ixp4xx hardware
Michael Trimarchi
- [U-Boot] [RFC USB PATCH] USB ehci I/O function fix
Michael Trimarchi
- [U-Boot] [RFC USB PATCH] USB ehci I/O function fix
Remy Bohmer
- [U-Boot] [RFC] nand boot for 85xx
Dave Liu
- [U-Boot] [RFC] nand boot for 85xx
Kumar Gala
- [U-Boot] [RFC] nand boot for 85xx
Kumar Gala
- [U-Boot] [RFC] nand boot for 85xx
Liu Dave
- [U-Boot] [RFC] nand boot for 85xx
Liu Dave
- [U-Boot] [RFC] nand boot for 85xx
Kumar Gala
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Graeme Russ
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Remy Bohmer
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Graeme Russ
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Mike Frysinger
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Graeme Russ
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Graeme Russ
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Mike Frysinger
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Mike Frysinger
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Shinya Kuribayashi
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Joakim Tjernlund
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Shinya Kuribayashi
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Remy Bohmer
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Shinya Kuribayashi
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Graeme Russ
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Graeme Russ
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Joakim Tjernlund
- [U-Boot] [RFC][PATCH] Code Clean-up (weak functions)
Shinya Kuribayashi
- [U-Boot] [U-Boot-Users] TFTP server support in U-boot
Ben Warren
- [U-Boot] [U-Boot-Users] TFTP server support in U-boot
Jerry Van Baren
- [U-Boot] [U-Boot-Users] TFTP server support in U-boot
santosh pattar
- [U-Boot] [U-Boot-Users] TFTP server support in U-boot
Wolfgang Denk
- [U-Boot] [U-Boot-Users] TFTP server support in U-boot
Wolfgang Denk
- [U-Boot] [U-Boot-Users] TFTP server support in U-boot
Ben Warren
- [U-Boot] [U-Boot-v2][PATCH] imx27: correct READ ID cmd with 2k pages
frederic Rodo
- [U-Boot] [U-Boot-v2][PATCH] imx27: correct READ ID cmd with 2k pages
frederic rodo
- [U-Boot] [U-Boot-v2][PATCH] imx27: nandboot with 2k pages
frederic Rodo
- [U-Boot] [U-Boot-v2][PATCH] imx27: nandboot with 2k pages
Sascha Hauer
- [U-Boot] [U-Boot-v2][PATCH] imx27: set pagesize_2k after probing the nand flash
frederic rodo
- [U-Boot] [ubi] Please pull git://www.denx.de/git/u-boot-ubi.git
Stefan Roese
- [U-Boot] [ubi] Please pull git://www.denx.de/git/u-boot-ubi.git
Stefan Roese
- [U-Boot] [ubi] Please pull git://www.denx.de/git/u-boot-ubi.git
Wolfgang Denk
- [U-Boot] [ubi] Please pull git://www.denx.de/git/u-boot-ubi.git
Wolfgang Denk
- [U-Boot] [USB EHCI PATCH 0/2] USB ehci pci initial support
Michael Trimarchi
- [U-Boot] [USB EHCI PATCH 0/2] USB ehci pci initial support
Remy Bohmer
- [U-Boot] [USB EHCI PATCH 0/2] USB ehci pci initial support
michael
- [U-Boot] [USB EHCI PATCH 1/2] USB ehci remove infinite loop and use handshake function
Michael Trimarchi
- [U-Boot] [USB EHCI PATCH 1/2] USB ehci remove infinite loop and use handshake function
Stefan Roese
- [U-Boot] [USB EHCI PATCH 1/2] USB ehci remove infinite loop and use handshake function
michael
- [U-Boot] [USB EHCI PATCH 2/2] USB ehci ixp4xx support
Michael Trimarchi
- [U-Boot] [USB EHCI V2 PATCH 0/2] Add initial support for USB ehci pci
Remy Bohmer
- [U-Boot] [USB EHCI V2 PATCH 0/2] Add initial support for USB ehci pci
michael
- [U-Boot] [USB EHCI V2 PATCH 0/2] Add initial support for USB ehci pci
Michael Trimarchi
- [U-Boot] [USB EHCI V2 PATCH 1/2] USB ehci remove infinite loop and use handshake function
Michael Trimarchi
- [U-Boot] [USB EHCI V2 PATCH 2/2] USB ehci ixp4xx support
Michael Trimarchi
- [U-Boot] [USB PATCH] USB change speed
Michael Trimarchi
- [U-Boot] About assign parameters for bootm command
mike xu
- [U-Boot] About assign parameters for bootm command
Wolfgang Denk
- [U-Boot] About assign parameters for bootm command
mike xu
- [U-Boot] About generate big-endian ramdisk
mike xu
- [U-Boot] add usb_system_autoupdate command.
Wolfgang Denk
- [U-Boot] Adding NAND Boot to uboot
Fahd Abidi
- [U-Boot] Adding NAND Boot to uboot
Scott Wood
- [U-Boot] alpr U-Boot image too big
Stefan Roese
- [U-Boot] alpr U-Boot image too big
Pieter Voorthuijsen
- [U-Boot] alpr U-Boot image too big
Stefan Roese
- [U-Boot] ARM926EJ-S: defining TEXT_BASE
Roman Mashak
- [U-Boot] ARM926EJ-S: defining TEXT_BASE
Wolfgang Denk
- [U-Boot] ARM: set up endianess
Roman Mashak
- [U-Boot] Ask a question about compiler with u-boot?
peter meng
- [U-Boot] AT91 Pull request
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] AT91 Pull request
Wolfgang Denk
- [U-Boot] AT91 Pull request
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] AT91 Pull request
Wolfgang Denk
- [U-Boot] boardname xxx-yyy produce error
Willi Schulte
- [U-Boot] boardname xxx-yyy produce error
Wolfgang Denk
- [U-Boot] boardname xxx-yyy produce error
Willi Schulte
- [U-Boot] boardname xxx-yyy produce error
Wolfgang Denk
- [U-Boot] bootlimit for arm? watchdog?
Wolfgang Denk
- [U-Boot] bootm command: is there any load address limitation for fdt?
Wolfgang Denk
- [U-Boot] bootm command: is there any load address limitation for fdt?
Richard Retanubun
- [U-Boot] bootm command: is there any load address limitation for fdt?
Jerry Van Baren
- [U-Boot] bootm command: is there any load address limitation for fdt?
Richard Retanubun
- [U-Boot] Bug in nand_default_bbt?
Nishanth Menon
- [U-Boot] CFI: flash_write_cfiword() slow
Jens Gehrlein
- [U-Boot] Chiropractors Contact List and many more from other medical professions
mt Bunch
- [U-Boot] Commit 9eb79bd8 breaks building for MBX860T board
Wolfgang Denk
- [U-Boot] Commit 9eb79bd8 breaks building for MBX860T board
Ben Warren
- [U-Boot] Commit at91: Choose environment variables location within make config target
Remy Bohmer
- [U-Boot] CONFIG_ENV_ADDR incorrect in MPC8313ERDB.h
Norbert van Bolhuis
- [U-Boot] confirm ab7aa8d57acab3af6153abdd3ca6718a0607f956
Uday Pavadshetty
- [U-Boot] CONGRATULATIONS YOUR EMAIL ADDRESS EMERGED AS A WINNER IN THE NKL 2008
NKL INTERNATIONAL LOTTERY PROGRAM
- [U-Boot] Copy environment variables to another board
Giuseppe Modugno
- [U-Boot] Copy environment variables to another board
Wolfgang Denk
- [U-Boot] Copy environment variables to another board
Giuseppe Modugno
- [U-Boot] Copy environment variables to another board
Giuseppe Modugno
- [U-Boot] Copy environment variables to another board
Alessandro Rubini
- [U-Boot] Copy environment variables to another board
Giuseppe Modugno
- [U-Boot] Copy environment variables to another board
Wolfgang Denk
- [U-Boot] CPCI405 doesn't build anymore
Stefan Roese
- [U-Boot] crash when doing `sf probe` multiple times due to API miscommunication
Mike Frysinger
- [U-Boot] crash when doing `sf probe` multiple times due to API miscommunication
Mike Frysinger
- [U-Boot] Create a Bootable DAS U-Boot pen drive
muffie at lavabit.com
- [U-Boot] Create a Bootable DAS U-Boot pen drive
muffie at lavabit.com
- [U-Boot] DE2 board with MMC interface (PIO based) and FAT support enabled
Wolfgang Denk
- [U-Boot] DE2 board with MMC interface (PIO based) and FAT support enabled
ivanchuklist ivanchu
- [U-Boot] Dear netexpress.net Email Owner
Email Owner
- [U-Boot] debug uboot from ram for x86 board
LanceZ
- [U-Boot] debug uboot from ram for x86 board
Graeme Russ
- [U-Boot] debug uboot from ram for x86 board
Lance Zhang
- [U-Boot] debug uboot from ram for x86 board
Lance Zhang
- [U-Boot] Debugging U-Boot with BDI2000
Tommy Wang
- [U-Boot] device-tree check MPC5200B Lite
Marco Antônio Possamai
- [U-Boot] DHCP/BOOP command behavior
Brian S. Park
- [U-Boot] DHCP/BOOP command behavior
Pawel Pastuszak
- [U-Boot] Does u-boot support custom binaries?
arun c
- [U-Boot] Does u-boot support custom binaries?
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] dts to dtb generation
Marco Antônio Possamai
- [U-Boot] dts to dtb generation
Jerry Van Baren
- [U-Boot] dts to dtb generation
Detlev Zundel
- [U-Boot] EHCI last patch
michael
- [U-Boot] EHCI last patch
Stefan Roese
- [U-Boot] EHCI last patch
michael
- [U-Boot] EHCI last patch
Stefan Roese
- [U-Boot] Error compiling UBOOT 1.3.4 for AT91RM9200
Mohamed Thalib .H
- [U-Boot] Error compiling UBOOT 1.3.4 for AT91RM9200
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] Error in buffer data for NAND flash write, read on OMAP3430SDP.
Radha Krishna
- [U-Boot] Error in buffer data for NAND flash write, read on OMAP3430SDP.
Dirk Behme
- [U-Boot] Error in buffer data for NAND flash write, read on OMAP3430SDP.
Radha Krishna
- [U-Boot] Error in buffer data for NAND flash write, read on OMAP3430SDP.
Nishanth Menon
- [U-Boot] Error in buffer data for NAND flash write, read on OMAP3430SDP.
Nishanth Menon
- [U-Boot] fat.c:707: warning: array subscript is above array bounds
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] fat.c:707: warning: array subscript is above array bounds
David Hawkins
- [U-Boot] fat.c:707: warning: array subscript is above array bounds
Wolfgang Denk
- [U-Boot] fat.c:707: warning: array subscript is above array bounds
Wolfgang Denk
- [U-Boot] flash erasing: len alignment
Mike Frysinger
- [U-Boot] flash erasing: len alignment
Wolfgang Denk
- [U-Boot] flash erasing: len alignment
Mike Frysinger
- [U-Boot] flash erasing: len alignment
Wolfgang Denk
- [U-Boot] FPGA programming driver architecture
Hugo Villeneuve
- [U-Boot] FPGA programming driver architecture
Hugo Villeneuve
- [U-Boot] FPGA programming driver architecture
Wolfgang Denk
- [U-Boot] FPGA programming driver architecture
Hugo Villeneuve
- [U-Boot] FPGA programming driver architecture
Wolfgang Denk
- [U-Boot] frescale NAND FLASH problems
Carlos kescuin
- [U-Boot] frescale NAND FLASH problems
Scott Wood
- [U-Boot] FSL DDR @ 83xx
Andre Schwarz
- [U-Boot] FSL DDR @ 83xx
Jon Loeliger
- [U-Boot] FSL DDR @ 83xx
Kim Phillips
- [U-Boot] FSL DDR @ 83xx
Andre Schwarz
- [U-Boot] FSL DDR @ 83xx
Andre Schwarz
- [U-Boot] FSL DDR @ 83xx
Kumar Gala
- [U-Boot] FSL DDR @ 83xx
Andre Schwarz
- [U-Boot] FSL DDR @ 83xx
Andre Schwarz
- [U-Boot] FSL DDR @ 83xx
Jon Loeliger
- [U-Boot] FSL DDR @ 83xx
Jon Loeliger
- [U-Boot] FSL DDR @ 83xx
Jon Loeliger
- [U-Boot] ftp area ftp://ftp.denx.de/pub/u-boot/
Dusek, Richard (Richard)** CTR **
- [U-Boot] ftp area ftp://ftp.denx.de/pub/u-boot/
Ben Warren
- [U-Boot] ftp area ftp://ftp.denx.de/pub/u-boot/
Dirk Behme
- [U-Boot] Fwd: [PATCH] nand booting support (SPL) for phyCORE-i.MX31
Magnus Lilja
- [U-Boot] Fwd: [PATCH] nand booting support (SPL) for phyCORE-i.MX31
Maxim Artamonov
- [U-Boot] General Dentists Listing for the United States
Rucker ghost
- [U-Boot] GOOD DAY,
MR AHMED HABIB
- [U-Boot] gumstix and uboot
Jim Don
- [U-Boot] gumstix and uboot
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] header intact
chaitanya
- [U-Boot] hello
tessey geb
- [U-Boot] HOSTCC version
Andy Pont
- [U-Boot] HOSTCC version
Wolfgang Denk
- [U-Boot] HOSTCC version
Andy Pont
- [U-Boot] HOSTCC version
Wolfgang Denk
- [U-Boot] HOSTCC version
Mike Frysinger
- [U-Boot] how compilor know where .text section starts from?
hank.peng
- [U-Boot] how compilor know where .text section starts from?
Wolfgang Denk
- [U-Boot] how compilor know where .text section starts from?
hank peng
- [U-Boot] how compilor know where .text section starts from?
chen gong
- [U-Boot] how do I find out the memory map for my port forat91rm9200dk
Vignesh Kumar B
- [U-Boot] how do I find out the memory map for my port for at91rm9200dk
Diptopal Basu
- [U-Boot] how do I find out the memory map for my port for at91rm9200dk
Diptopal Basu
- [U-Boot] How does U boot pass kernel parameters to Operating System ...
Diptopal Basu
- [U-Boot] How to backup the working u-boot image from the flash image.
Daniel Mack
- [U-Boot] How to backup the working u-boot image from the flash image.
Mohamed Thalib .H
- [U-Boot] How to backup the working u-boot image from the flash image.
Mohamed Thalib .H
- [U-Boot] How to initial the new memory within u-boot ?
peter meng
- [U-Boot] hush shell script commands(eval)
rudresh
- [U-Boot] include/autoconf.mk:212: *** missing separator. Stop.
Wolfgang Denk
- [U-Boot] include/autoconf.mk:212: *** missing separator. Stop.
Becky Bruce
- [U-Boot] include/autoconf.mk:212: *** missing separator. Stop.
Wolfgang Denk
- [U-Boot] Increase command line size
Paulo Flabiano Smorigo
- [U-Boot] Increase command line size
Wolfgang Denk
- [U-Boot] Increase command line size
Paulo Flabiano Smorigo
- [U-Boot] Increase command line size
Wolfgang Denk
- [U-Boot] Increase command line size
Paulo Flabiano Smorigo
- [U-Boot] init FEC @ MPC5200
Andre Schwarz
- [U-Boot] init FEC @ MPC5200
Ben Warren
- [U-Boot] init FEC @ MPC5200
André Schwarz
- [U-Boot] Installing Linux kernel, nothing to execute in RAM...
Simon Boman
- [U-Boot] Installing Linux kernel, nothing to execute in RAM...
Kim Phillips
- [U-Boot] Installing Linux kernel, nothing to execute in RAM...
Simon Boman
- [U-Boot] Interrupts in standalone application
kishore choudhari
- [U-Boot] Interrupts in standalone application
Wolfgang Denk
- [U-Boot] iPAQ 21x support (+PXA3xx NAND flash and MMC)
Adrian Filipi
- [U-Boot] iPAQ 21x support (+PXA3xx NAND flash and MMC)
Oliver Ford
- [U-Boot] iPAQ 21x support (+PXA3xx NAND flash and MMC)
Daniel Mack
- [U-Boot] Is arm-2008-11-24.iso the right image to compile U Boot for ARM ?
Wolfgang Denk
- [U-Boot] Is arm-2008-11-24.iso the right image to compile U Boot for ARM ?
Diptopal Basu
- [U-Boot] Is arm-2008-11-24.iso the right image to compile U Boot for ARM ?
Diptopal Basu
- [U-Boot] Is arm-2008-11-24.iso the right image to compile U Boot for ARM ?
Diptopal Basu
- [U-Boot] Is arm-2008-11-24.iso the right image to compile U Boot for ARM ?
Wolfgang Denk
- [U-Boot] Is arm-2008-11-24.iso the right image to compile U Boot for ARM ?
Diptopal Basu
- [U-Boot] Is it possible to use 2GB or DDR on MPC834x?
Valeriy Glushkov
- [U-Boot] Is it possible to use 2GB or DDR on MPC834x?
Scott Wood
- [U-Boot] jffs2_1pass and jffs2_nand_1pass
Derek Ou
- [U-Boot] li r0,__got2_entries at sectoff@l
youhello youhello
- [U-Boot] Lost of data in board info before relocating U-Boot in SDRAM
Gregory Medwed
- [U-Boot] LXT971 Ethernet problem
tomydevasia
- [U-Boot] LXT971 ethernet driver
tomydevasia
- [U-Boot] LXT971 Ethernet problem
Wolfgang Denk
- [U-Boot] LXT971 Ethernet problem
Wolfgang Denk
- [U-Boot] Microblaze patches
Wolfgang Denk
- [U-Boot] Microblaze patches
Michal Simek
- [U-Boot] Minor bug found in board/zylonite/lowlevel_init.S. 0x300 changed to 300.
Tom Evans
- [U-Boot] mkimage warning: ISO C99 requires ...
Wolfgang Denk
- [U-Boot] MPC5121 MSCAN Peripheral in U-Boot
Matteo Canella
- [U-Boot] MPC5121 MSCAN Peripheral in U-Boot
Wolfgang Denk
- [U-Boot] MPC5121 MSCAN Peripheral in U-Boot
Matteo Canella
- [U-Boot] MPC5121 MSCAN Peripheral in U-Boot
Wolfgang Grandegger
- [U-Boot] MPC8313RDB evaluation platform hangs on nand configured U-boot
RobertMMorgan at eaton.com
- [U-Boot] mtd partitions
Carlos kescuin
- [U-Boot] mtd partitions
Scott Wood
- [U-Boot] mtd partitions (Carlos kescuin)
Tom Evans
- [U-Boot] My Linux kernel hangs at the Uncompressing Linux ... phase
Piyush Shah
- [U-Boot] My Linux kernel hangs at the Uncompressing Linux ... phase
Pink Boy
- [U-Boot] My Linux kernel hangs at the Uncompressing Linux ... phase
Diptopal Basu
- [U-Boot] NAND only (no NOR)
Norbert van Bolhuis
- [U-Boot] NAND only (no NOR)
Alessandro Rubini
- [U-Boot] NAND only (no NOR)
Sean MacLennan
- [U-Boot] NAND only (no NOR)
Stefan Roese
- [U-Boot] NAND only (no NOR)
Sean MacLennan
- [U-Boot] NAND only (no NOR)
Trent Piepho
- [U-Boot] NAND only (no NOR)
Leon Woestenberg
- [U-Boot] nand potential div0
Ryan J M
- [U-Boot] nand sector size is zero in jffs2 cmds
Derek Ou
- [U-Boot] nand sector size is zero in jffs2 cmds
Derek Ou
- [U-Boot] NetLoop() code ordering
Ben Warren
- [U-Boot] nios: Move README.nios_CONFIG_SYS_NIOS_CPU to doc/ dir
Shinya Kuribayashi
- [U-Boot] nios: Move README.nios_CONFIG_SYS_NIOS_CPU to doc/ dir
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] no console output when booting kernel!
tjzkzs
- [U-Boot] no kernel console output !
tjzkzs
- [U-Boot] no kernel console output !
Jerry Van Baren
- [U-Boot] no kernel console output !
Pawel Pastuszak
- [U-Boot] Old version of u-boot(OF not supported) loads latest linux kernel(OF supported), any problem?
pengxihan
- [U-Boot] Part 1/0
Stefan Althoefer
- [U-Boot] Part 1/0
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] PATCH: mpc8xx PLPRCR (init_pll_866)
Wolfgang Denk
- [U-Boot] pci booting 460ex seems to hang at tlb entries
Ayman M. El-Khashab
- [U-Boot] pci_hose_{bus_to_phys,phys_to_bus} and inbound memory
Kumar Gala
- [U-Boot] pci_hose_{bus_to_phys,phys_to_bus} and inbound memory
Kumar Gala
- [U-Boot] pci_hose_{bus_to_phys,phys_to_bus} and inbound memory
Wolfgang Denk
- [U-Boot] PCIe based SATA card?
Kumar Gala
- [U-Boot] PCIe based SATA card?
Ayman El-Khashab
- [U-Boot] PHY lib
Andy Fleming
- [U-Boot] Please pull u-boot-mpc85xx.git
Andy Fleming
- [U-Boot] Please pull u-boot-mpc85xx.git
Wolfgang Denk
- [U-Boot] Please pull u-boot-mpc85xx.git
Andy Fleming
- [U-Boot] Please pull u-boot-mpc85xx.git
Peter Tyser
- [U-Boot] Please pull u-boot-mpc85xx.git
Andy Fleming
- [U-Boot] Please pull u-boot-mpc85xx.git
Peter Tyser
- [U-Boot] Please pull u-boot-mpc85xx.git
Andy Fleming
- [U-Boot] Please pull u-boot-mpc85xx.git
Wolfgang Denk
- [U-Boot] Pluto not work after log message : Errno 28: No space left on device
陈琳涛
- [U-Boot] ppc4xx: u-boot sees PCIe endpoint, linux does not.
Benjamin Herrenschmidt
- [U-Boot] ppc4xx: u-boot sees PCIe endpoint, linux does not.
Leon Woestenberg
- [U-Boot] ppc4xx: u-boot sees PCIe endpoint, linux does not.
Stefan Roese
- [U-Boot] Problem building fw_printenv un u-boot 1.3.4
Pink Boy
- [U-Boot] Problem building fw_printenv un u-boot 1.3.4
Pink Boy
- [U-Boot] Problem building fw_printenv un u-boot 1.3.4
Wolfgang Denk
- [U-Boot] Problem building fw_printenv un u-boot 1.3.4
Pink Boy
- [U-Boot] problem doing rebase in fresh git.denx.de/u-boot.git clone
Wolfgang Denk
- [U-Boot] problem doing rebase in fresh git.denx.de/u-boot.git clone
Wolfgang Denk
- [U-Boot] problem doing rebase in fresh git.denx.de/u-boot.git clone
Wolfgang Denk
- [U-Boot] problem doing rebase in fresh git.denx.de/u-boot.git clone
Peter Vollmer
- [U-Boot] problem doing rebase in fresh git.denx.de/u-boot.git clone
Peter Vollmer
- [U-Boot] problem doing rebase in fresh git.denx.de/u-boot.git clone
Peter Vollmer
- [U-Boot] Problem in Optimizing the Boot Loader in Start.s of MPC85xx
Scott Wood
- [U-Boot] Problem in Optimizing the Boot Loader in Start.s of MPC85xx
Vignesh Kumar B
- [U-Boot] Pull request - microblaze
Michal Simek
- [U-Boot] Pull request - microblaze
Wolfgang Denk
- [U-Boot] Pull request - net
Ben Warren
- [U-Boot] Pull request - net
Wolfgang Denk
- [U-Boot] Pull request: nand flash
Scott Wood
- [U-Boot] Pull request: nand flash
Wolfgang Denk
- [U-Boot] Pull request: nand flash
Scott Wood
- [U-Boot] Pull request: nand flash
Liu Dave
- [U-Boot] Pull request: nand flash
Scott Wood
- [U-Boot] Pull request: nand flash
Liu Dave
- [U-Boot] Pull request: nand flash
Wolfgang Denk
- [U-Boot] Pull request: u-boot-sh
Nobuhiro Iwamatsu
- [U-Boot] Pull request: u-boot-sh
Wolfgang Denk
- [U-Boot] Pull request: u-boot-SUBREPO
Wolfgang Denk
- [U-Boot] Pull request: u-boot-usb
Remy Bohmer
- [U-Boot] Pull request: u-boot-usb
Wolfgang Denk
- [U-Boot] Pull Request: u-boot-usb.git
Remy Bohmer
- [U-Boot] Pull Request: u-boot-usb.git
Wolfgang Denk
- [U-Boot] Pull request: u-boot-video
Anatolij Gustschin
- [U-Boot] Pull request: u-boot-video
Wolfgang Denk
- [U-Boot] Pull requst u-boot-mpc86xx
Jon Loeliger
- [U-Boot] Pull requst u-boot-mpc86xx
Wolfgang Denk
- [U-Boot] question about TEXT_BASE in U-boot
王睿
- [U-Boot] question about TEXT_BASE in U-boot
wangrui
- [U-Boot] question about TEXT_BASE in U-boot
tike64 at gmail.com
- [U-Boot] quick easy question (hopefully)
Jim Don
- [U-Boot] reducing u-boot.bin size
Fahd Abidi
- [U-Boot] reducing u-boot.bin size
Wolfgang Denk
- [U-Boot] Reg. working with uboot
Vanee S
- [U-Boot] Reg. working with uboot
Wolfgang Denk
- [U-Boot] Reg. working with uboot
Jerry Van Baren
- [U-Boot] Reg. working with uboot
michael
- [U-Boot] Reg. working with uboot
Vanee S
- [U-Boot] Reg. working with uboot
Wolfgang Denk
- [U-Boot] run_command() / do_run() fails in standalone application
Remy Bohmer
- [U-Boot] run_command() / do_run() fails in standalone application
Wolfgang Denk
- [U-Boot] run_command() / do_run() fails in standalone application
Remy Bohmer
- [U-Boot] run_command() / do_run() fails in standalone application
Wolfgang Denk
- [U-Boot] run_command() / do_run() fails in standalone application
rudresh
- [U-Boot] SATA/IDE/etc... init
Mike Frysinger
- [U-Boot] SATA/IDE/etc... init
Wolfgang Denk
- [U-Boot] SATA/IDE/etc... init
Mike Frysinger
- [U-Boot] SATA/IDE/etc... init
Scott Wood
- [U-Boot] SATA/IDE/etc... init
Wolfgang Denk
- [U-Boot] SATA/IDE/etc... init
Mike Frysinger
- [U-Boot] SATA/IDE/etc... init
Stefan Roese
- [U-Boot] SATA/IDE/etc... init
Mike Frysinger
- [U-Boot] scan jffs2 NAND slow and bad block
Derek Ou
- [U-Boot] scan jffs2 NAND slow and bad block
Wolfgang Denk
- [U-Boot] sectoff in asm
youhello youhello
- [U-Boot] show_boot_progess @ ppc not working
Andre Schwarz
- [U-Boot] show_boot_progess @ ppc not working
Heiko Schocher
- [U-Boot] show_boot_progess @ ppc not working
Andre Schwarz
- [U-Boot] show_boot_progess @ ppc not working
Heiko Schocher
- [U-Boot] show_boot_progess @ ppc not working
Andre Schwarz
- [U-Boot] show_boot_progess @ ppc not working
Graeme Russ
- [U-Boot] show_boot_progess @ ppc not working
Andre Schwarz
- [U-Boot] Spansion Flash File system
Naveen A
- [U-Boot] Spansion Flash File system
Marc Leeman
- [U-Boot] Spansion Flash File system
Wolfgang Denk
- [U-Boot] Spansion S29JL032H and detecting problem
Roman Mashak
- [U-Boot] spansion spi flash driver ?
Mike Frysinger
- [U-Boot] TFTP server support in U-boot
santosh pattar
- [U-Boot] timer interface
Roman Mashak
- [U-Boot] Too Large patch
kenneth johansson
- [U-Boot] Too Large patch
Mike Frysinger
- [U-Boot] Too Large patch
Wolfgang Denk
- [U-Boot] Too Large patch
Mike Frysinger
- [U-Boot] Too Large patch
Wolfgang Denk
- [U-Boot] Too Large patch
Mike Frysinger
- [U-Boot] TQM8xxL flash memory write problem
Thomas Maenner
- [U-Boot] TQM8xxL flash memory write problem
Wolfgang Denk
- [U-Boot] TQM8xxL flash memory write problem
Thomas Maenner
- [U-Boot] TSEC in loop
Alemao
- [U-Boot] Two confusing questions about relocation of code on MPC8548CDS board
hank peng
- [U-Boot] U-boot build failes witharmv5tel-reghat-linux-gnueabi-gcc (4.1.2)
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] U-boot build faileswitharmv5tel-reghat-linux-gnueabi-gcc (4.1.2)
Prafulla Wadaskar
- [U-Boot] U-boot build failes witharmv5tel-reghat-linux-gnueabi-gcc (4.1.2)
Prafulla Wadaskar
- [U-Boot] u-boot configurations for custom board with MPC 8265
Jyotshna Cherukuri
- [U-Boot] u-boot configurations for custom board with MPC 8265
Jayakrishnan M
- [U-Boot] u-boot didn't mount ramdisk ...
mike xu
- [U-Boot] u-boot didn't mount ramdisk ...
Wolfgang Denk
- [U-Boot] u-boot didn't mount ramdisk ...
mike xu
- [U-Boot] u-boot didn't mount ramdisk ...
mike xu
- [U-Boot] u-boot didn't mount ramdisk ...
Wolfgang Denk
- [U-Boot] u-boot didn't mount ramdisk ...
mike xu
- [U-Boot] u-boot didn't mount ramdisk ...
Wolfgang Denk
- [U-Boot] u-boot didn't mount ramdisk ...
mike xu
- [U-Boot] u-boot didn't mount ramdisk ...
Wolfgang Denk
- [U-Boot] u-boot didn't mount ramdisk ...
mike xu
- [U-Boot] u-boot for ixp425
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] u-boot for ixp425
Leon Woestenberg
- [U-Boot] U-boot freezes on relocate code to RAM
Elison Niven
- [U-Boot] U-Boot hangs after uncompressing image
Marco Antônio Possamai
- [U-Boot] U-Boot hangs in start_armboot()
Roman Mashak
- [U-Boot] U-Boot hangs in start_armboot()
Roman Mashak
- [U-Boot] U-Boot hangs in start_armboot()
Jean-Christophe PLAGNIOL-VILLARD
- [U-Boot] U-Boot hangs in start_armboot()
Roman Mashak
- [U-Boot] U-Boot hangs in start_armboot()
Roman Mashak
- [U-Boot] U-Boot hangs in start_armboot()
Roman Mashak
- [U-Boot] U-Boot on Xilinx ML510
Felix Radensky
- [U-Boot] U-Boot on Xilinx ML510
Michal Simek
- [U-Boot] U-Boot on Xilinx ML510
Felix Radensky
- [U-Boot] U-Boot on Xilinx ML510
Michal Simek
- [U-Boot] U-boot to DE2 board with MMC interface (PIO based) and FAT support enabled
ivanchuklist ivanchu
- [U-Boot] u-boot-2008.10 nand boot not working for SMDK6400
Alagan S
- [U-Boot] u-boot-2008.10 nand boot not working for SMDK6400
Guennadi Liakhovetski
- [U-Boot] u-boot.lds i686-pc-linux-gnu-ld section .start16 overlapssection .text
Vignesh Kumar B
- [U-Boot] u-boot.lds i686-pc-linux-gnu-ld section .start16 overlapssection .text
Lance Zhang
- [U-Boot] u-boot.lds i686-pc-linux-gnu-ld section .start16 overlapssection .text
Lance Zhang
- [U-Boot] u-boot.lds i686-pc-linux-gnu-ld section .start16 overlaps section .text
LanceZ
- [U-Boot] u-boot.lds i686-pc-linux-gnu-ld section .start16 overlapssection .text
Graeme Russ
- [U-Boot] u-boot.lds i686-pc-linux-gnu-ld section .start16 overlapssection .text
Graeme Russ
- [U-Boot] u-boot.lds i686-pc-linux-gnu-ld section .start16 overlapssection .text
LanceZ
- [U-Boot] Uboot
石涛
- [U-Boot] Uboot AS Space in MPC85xx Start.S
Vignesh Kumar B
- [U-Boot] v2009.01-rc1 is out - update of release schedule
Wolfgang Denk
- [U-Boot] Warning in ffs2_1pass.c
Dirk Behme
- [U-Boot] Warning in ffs2_1pass.c
Scott Wood
- [U-Boot] We have data for Physicians, Chiropractors, Physicians etc..
Genevieve clue
- [U-Boot] We have data for Veterinarians, Massage Therapists, Dentists etc..
Hastings U Gail
- [U-Boot] What is NetState?
Timur Tabi
- [U-Boot] What is NetState?
Ben Warren
- [U-Boot] What shall u-boot do before passing 'root=/dev/ram0' to kernel?
Wolfgang Denk
- [U-Boot] What shall u-boot do before passing 'root=/dev/ram0' to kernel?
mike xu
- [U-Boot] What shall u-boot do before passing 'root=/dev/ram0' to kernel?
Wolfgang Denk
- [U-Boot] What shall u-boot do before passing 'root=/dev/ram0' to kernel?
mike xu
- [U-Boot] Write to JFFS2 filesystem
Jayakrishnan M
- [U-Boot] Writing own Standalone programs
Piyush Shah
- [U-Boot] Writing own Standalone programs
Wolfgang Denk
- [U-Boot] 短信群发为企业带来变革 615
龙生
Last message date:
Wed Dec 31 22:31:41 CET 2008
Archived on: Wed Dec 31 22:31:47 CET 2008
This archive was generated by
Pipermail 0.09 (Mailman edition).