[U-Boot] Pull requst u-boot-mpc86xx

[Wolfgang Denk]

Dear Jon Loeliger,

In message <1228151700.24649.1.camel at ld0161-tx32> you wrote:
> 
> The following changes since commit 2077e348c2a84901022ad95311b47b70361e6daa:
>   Scott Wood (1):
>         NAND: Fix misplaced return statement in nand_{read,write}_skip_bad().
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-mpc86xx.git master
> 
> Becky Bruce (1):
>       mpc8641: Fix error in README
> 
> Jon Loeliger (2):
>       86xx: Fix non-64-bit compilation problems.
>       Removed unused CONFIG_L1_INIT_RAM symbol.
> 
>  doc/README.mpc8641hpcn        |   10 +++++-----
>  include/configs/MPC8349EMDS.h |    1 -
>  include/configs/MPC8349ITX.h  |    1 -
>  include/configs/MPC8536DS.h   |    2 --
>  include/configs/MPC8540ADS.h  |    1 -
>  include/configs/MPC8540EVAL.h |    1 -
>  include/configs/MPC8541CDS.h  |    1 -
>  include/configs/MPC8544DS.h   |    2 --
>  include/configs/MPC8548CDS.h  |    1 -
>  include/configs/MPC8555CDS.h  |    1 -
>  include/configs/MPC8560ADS.h  |    1 -
>  include/configs/MPC8568MDS.h  |    1 -
>  include/configs/MPC8572DS.h   |    2 --
>  include/configs/MPC8610HPCD.h |   15 ++++++++++++++-
>  include/configs/MPC8641HPCN.h |    1 -
>  include/configs/MVBLM7.h      |    1 -
>  include/configs/PM854.h       |    1 -
>  include/configs/PM856.h       |    1 -
>  include/configs/SBC8540.h     |    1 -
>  include/configs/TQM834x.h     |    1 -
>  include/configs/TQM85xx.h     |    1 -
>  include/configs/sbc8349.h     |    1 -
>  include/configs/sbc8548.h     |    1 -
>  include/configs/sbc8560.h     |    1 -
>  include/configs/sbc8641d.h    |   15 ++++++++++++++-
>  include/configs/socrates.h    |    1 -
>  include/configs/stxgp3.h      |    1 -
>  include/configs/stxssa.h      |    1 -
>  28 files changed, 33 insertions(+), 35 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
8) Use common sense in routing  cable.  Avoid  wrapping  coax  around
   sources  of  strong  electric  or magnetic fields. Do not wrap the
   cable  around  flourescent  light  ballasts  or  cyclotrons,   for
   example.
- Ethernet Headstart Product, Information and Installation Guide,
   Bell Technologies, pg. 11