[U-Boot] [PATCH] Add AMD 29LV160DB FLASH support to SBC2410 board.

[Daniel Schuler]

The new SBC-2410A board from Embest now ships with 2MB NOR FLASH,
for which CONFIG_AMD_LV160 has been defined in include/configs/sbc2410x.h

This chip is already supported in other architectures, so AMD_ID_LV160B
has been used as-is in board/sbc2410x/flash.c

Signed-off-by: Daniel Schuler <dbschuler at gmail.com>
---
 board/sbc2410x/flash.c     |    6 ++++++
 include/configs/sbc2410x.h |   21 ++++++++++++++-------
 2 files changed, 20 insertions(+), 7 deletions(-)

diff --git a/board/sbc2410x/flash.c b/board/sbc2410x/flash.c
index abb0935..81aa9e8 100644
--- a/board/sbc2410x/flash.c
+++ b/board/sbc2410x/flash.c
@@ -69,6 +69,9 @@ ulong flash_init (void)
 #elif defined(CONFIG_AMD_LV800)
             (AMD_MANUFACT & FLASH_VENDMASK) |
             (AMD_ID_LV800B & FLASH_TYPEMASK);
+#elif defined(CONFIG_AMD_LV160)
+            (AMD_MANUFACT & FLASH_VENDMASK) |
+            (AMD_ID_LV160B & FLASH_TYPEMASK);
 #else
 #error "Unknown flash configured"
 #endif
@@ -142,6 +145,9 @@ void flash_print_info (flash_info_t * info)
     case (AMD_ID_LV800B & FLASH_TYPEMASK):
         printf ("1x Amd29LV800BB (8Mbit)\n");
         break;
+    case (AMD_ID_LV160B & FLASH_TYPEMASK):
+        printf ("1x Amd29LV160DB (16Mbit)\n");
+        break;
     default:
         printf ("Unknown Chip Type\n");
         goto Done;
diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
index d7a6ae4..944d85b 100644
--- a/include/configs/sbc2410x.h
+++ b/include/configs/sbc2410x.h
@@ -139,7 +139,7 @@

 #define    CONFIG_SYS_LOAD_ADDR        0x33000000    /* default load
address    */

-/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
+/* the PWM Timer 4 uses a counter of 15625 for 10 ms, so we need */
 /* it to wrap 100 times (total 1562500) to get 1 sec. */
 #define    CONFIG_SYS_HZ            1562500

@@ -173,29 +173,36 @@
  */
 /* #define CONFIG_AMD_LV400    1    /\* uncomment this if you have a
LV400 flash *\/ */

-#define CONFIG_AMD_LV800    1    /* uncomment this if you have a LV800 flash */
+/* #define CONFIG_AMD_LV800    1    /\* uncomment this if you have a
LV800 flash *\/ */
+
+#define CONFIG_AMD_LV160    1    /* uncomment this if you have a LV160 flash */

 #define CONFIG_SYS_MAX_FLASH_BANKS    1    /* max number of memory banks */

+#define CONFIG_ENV_IS_IN_FLASH    1
+#define CONFIG_ENV_SIZE        0x10000    /* Total Size of
Environment Sector */
+
+#ifdef CONFIG_AMD_LV160
+#define PHYS_FLASH_SIZE        0x00200000 /* 2MB */
+#define CONFIG_SYS_MAX_FLASH_SECT    (35)     /* max number of
sectors on one chip */
+#endif
+
 #ifdef CONFIG_AMD_LV800
 #define PHYS_FLASH_SIZE        0x00100000 /* 1MB */
 #define CONFIG_SYS_MAX_FLASH_SECT    (19)    /* max number of sectors
on one chip */
-#define CONFIG_ENV_ADDR        (CONFIG_SYS_FLASH_BASE + 0x0F0000) /*
addr of environment */
 #endif

 #ifdef CONFIG_AMD_LV400
 #define PHYS_FLASH_SIZE        0x00080000 /* 512KB */
 #define CONFIG_SYS_MAX_FLASH_SECT    (11)    /* max number of sectors
on one chip */
-#define CONFIG_ENV_ADDR        (CONFIG_SYS_FLASH_BASE + 0x070000) /*
addr of environment */
 #endif

+#define CONFIG_ENV_ADDR        (CONFIG_SYS_FLASH_BASE +
PHYS_FLASH_SIZE - CONFIG_ENV_SIZE) /* starting addr of environment */
+
 /* timeout values are in ticks */
 #define CONFIG_SYS_FLASH_ERASE_TOUT    (5*CONFIG_SYS_HZ) /* Timeout
for Flash Erase */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    (5*CONFIG_SYS_HZ) /* Timeout
for Flash Write */

-#define    CONFIG_ENV_IS_IN_FLASH    1
-#define CONFIG_ENV_SIZE        0x10000    /* Total Size of
Environment Sector */
-
 /*-----------------------------------------------------------------------
  * NAND flash settings
  */
--
1.5.6.3