[U-Boot] [PATCH-OMAP3] OMAP3: Check for MMC card

[Jason Kridner]

I've run u-boot with all of these patches and see it working well on  
Beagle.

On Dec 6, 2008, at 1:00 AM, Dirk Behme wrote:

> mmc_init was always returning success -- now returns failure if
> no card is present.
>
> Signed-off-by: Steve Sakoman <sakoman at gmail.com>
> Signed-off-by: Dirk Behme <dirk.behme at googlemail.com>
>
> ---
>
> * This patch applies on top of last 5 pending OMAP3 patches (in this  
> order):
>
> http://lists.denx.de/pipermail/u-boot/2008-November/043771.html
> http://lists.denx.de/pipermail/u-boot/2008-November/043898.html
> http://lists.denx.de/pipermail/u-boot/2008-November/043899.html
> http://lists.denx.de/pipermail/u-boot/2008-November/044026.html
> http://lists.denx.de/pipermail/u-boot/2008-November/044027.html
>
> * Compile tested for Beagle, Overo, Panora and EVM. Boot tested on  
> Beagle.
>
> drivers/mmc/omap3_mmc.c |   32 ++++++++++++++++----------------
> 1 files changed, 16 insertions(+), 16 deletions(-)
>
> Index: u-boot-arm/drivers/mmc/omap3_mmc.c
> ===================================================================
> --- u-boot-arm.orig/drivers/mmc/omap3_mmc.c
> +++ u-boot-arm/drivers/mmc/omap3_mmc.c
> @@ -523,22 +523,22 @@ unsigned long mmc_bread(int dev_num, uns
>
> int mmc_init(int verbose)
> {
> -	configure_mmc(&cur_card_data);
> -
> -	mmc_blk_dev.if_type = IF_TYPE_MMC;
> -	mmc_blk_dev.part_type = PART_TYPE_DOS;
> -	mmc_blk_dev.dev = 0;
> -	mmc_blk_dev.lun = 0;
> -	mmc_blk_dev.type = 0;
> -
> -	/* FIXME fill in the correct size (is set to 32MByte) */
> -	mmc_blk_dev.blksz = MMCSD_SECTOR_SIZE;
> -	mmc_blk_dev.lba = 0x10000;
> -	mmc_blk_dev.removable = 0;
> -	mmc_blk_dev.block_read = mmc_bread;
> -
> -	fat_register_device(&mmc_blk_dev, 1);
> -	return 0;
> +	if (configure_mmc(&cur_card_data) == 1) {
> +		mmc_blk_dev.if_type = IF_TYPE_MMC;
> +		mmc_blk_dev.part_type = PART_TYPE_DOS;
> +		mmc_blk_dev.dev = 0;
> +		mmc_blk_dev.lun = 0;
> +		mmc_blk_dev.type = 0;
> +
> +		/* FIXME fill in the correct size (is set to 32MByte) */
> +		mmc_blk_dev.blksz = MMCSD_SECTOR_SIZE;
> +		mmc_blk_dev.lba = 0x10000;
> +		mmc_blk_dev.removable = 0;
> +		mmc_blk_dev.block_read = mmc_bread;
> +
> +		fat_register_device(&mmc_blk_dev, 1);
> +		return 0;
> +	} else return 1;
> }
>
> int mmc_read(ulong src, uchar *dst, int size)
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot