[U-Boot] u-boot-2008.10 nand boot not working for SMDK6400

[Alagan S]

hi Guennadi
thanks for ur immediate reply...
i had flash u-boot-nand.bin into nand, after reseting nothing is coming in console but 4 LEDs(D11-D14) are glowing.i'm using SMDK6400 rev0.1
Thanks & Regards
Alagan.S

--- On Fri, 5/12/08, Guennadi Liakhovetski <g.liakhovetski at gmx.de> wrote:
From: Guennadi Liakhovetski <g.liakhovetski at gmx.de>
Subject: Re: u-boot-2008.10 nand boot not working for SMDK6400
To: "Alagan S" <contact_ssa82 at yahoo.in>
Date: Friday, 5 December, 2008, 8:07 AM

Hi Alagan,

On Fri, 5 Dec 2008, Alagan S wrote:

> hi Guennadi,

> Â Â Â Â Â Â Â Â Â Â Â  i am working on smdk6400
board.i've downloaded 
> u-boot-2008.10.i've compiled successfully and loaded u-boot.bin image 
> into nand flash(say F2) using working u-boot-1.1.6(say F1).
> step i followed....

Please, write to the u-boot mailing list with any u-boot questions. If you 
feel that one specific person can help better than the others you can add 
him or her to CC, but you _have_ to have the mailing list among 
recepients. Also if you reply to this mail, please, write to the list, 
otherwise, I do not think I will be able to reply to you.

> 1.booting board with nand-boot using F1 nand flash (u-boot-1.1.6)
> 2.removed F1 from nand socket
> 3.placed F2(fresh nand) in nand socket
> 4.downloaded u-boot.bin in memory(tftp c0008000 u-boot.bin) using tftp
> 5.erased F2 (nand erase 0 40000)
> 6.has written u-boot.bin into F2 (nand write c0008000 0 40000)
> 7.then reset the board with F2
> 
> but board is not booting.
> nand boot support is there??
> what is u-boot-nand.bin??i was trying to write into F2 but i has given
error??

u-boot-nand.bin _IS_ the image you need. It is this image that you have to 
flash to NAND.

Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer



      Add more friends to your messenger and enjoy! Go to http://messenger.yahoo.com/invite/