[U-Boot] FSL DDR @ 83xx

[Andre Schwarz]

Kim Phillips schrieb:
> On Mon, 08 Dec 2008 18:02:02 +0100
> Andre Schwarz <andre.schwarz at matrix-vision.de> wrote:
>
>   
>> I'd like to change my DDR setup code since it looks like my computed
>> values are not perfectly stable on our 8343 based board.
>>
>> This implies using a fake SPD and the related code to set up the controller.
>>
>> Is the "new" common FSL DDR setup code (cpu/mpc8xxx/ddr/*) stable for
>> 83xx or shall I stick to cpu/mpc83xx/spd_sdram.c for a while ?
>>     
>
> I haven't taken a look at the "new" common ddr code, and there are no
> current 83xx users that I know of, but if you're willing to port it
> over to 83xx, it should work better for you than the current 83xx spd
> code, and give us a basis to work on to move the rest of the 83xx boards
> over.
>
> Kim
>   
ok - thanks. That's why I'm asking ... no 83xx yet.
I'll try the default spd driver with fake EEPROM then.


regards,
André

MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler  - Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner