[U-Boot] FSL DDR @ 83xx

[Kim Phillips]

On Mon, 08 Dec 2008 18:02:02 +0100
Andre Schwarz <andre.schwarz at matrix-vision.de> wrote:

> I'd like to change my DDR setup code since it looks like my computed
> values are not perfectly stable on our 8343 based board.
> 
> This implies using a fake SPD and the related code to set up the controller.
> 
> Is the "new" common FSL DDR setup code (cpu/mpc8xxx/ddr/*) stable for
> 83xx or shall I stick to cpu/mpc83xx/spd_sdram.c for a while ?

I haven't taken a look at the "new" common ddr code, and there are no
current 83xx users that I know of, but if you're willing to port it
over to 83xx, it should work better for you than the current 83xx spd
code, and give us a basis to work on to move the rest of the 83xx boards
over.

Kim