[U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1

[Stefan Althoefer]

Jean-Christophe PLAGNIOL-VILLARD schrieb:

>>
>> diff -uprN u-boot-orig//lib_arm/board.c u-boot/lib_arm/board.c
>> --- u-boot-orig//lib_arm/board.c	2008-12-02 17:25:32.000000000 +0100
>> +++ u-boot/lib_arm/board.c	2008-12-02 23:29:36.000000000 +0100
>> @@ -441,6 +441,11 @@ extern void davinci_eth_set_mac_addr (co
>>  	}
>>  #endif
>>  
>> +#if defined(CONFIG_CMD_IDE)
>> +        puts("IDE:   ");
>> +        ide_init();
>> +#endif /* CONFIG_CMD_IDE */
> are you sure it will work?
> 
> Best Regards,
> J.

On my board (Janz emPC-A400 with IXP425) it does. With some more
patches to add IDE to this board.

What is your doubt?

If you see problems, drop this. I can also add IDE to board_late_init().

-- Stefan