[U-Boot] U-Boot hangs in start_armboot()

[Jean-Christophe PLAGNIOL-VILLARD]

On 20:37 Thu 11 Dec     , Roman Mashak wrote:
> Hello
> 
> 2008/12/11 Roman Mashak <romez777 at gmail.com>:
> > Briefly about the memory map: before remap NOR flash is at 0x0 and
> > SDRAM 0x10000000, after remap  -- SDRAM is mapped at 0x0.  I've built
> > a U-Boot image linked to 0x0, as I want to load it in RAM, so I linked
> > it to 0x0.
> >
> > Loading this image via JTAG into target RAM goes fine, but hangs at
> > 'start_armboot()', right after:
> 
> Oops, I've found the part of problem. I should have been linked to
> 0x01000000. It's not hanging in 'start_armboot()', but it outputs
> garbage on console instead of valid text messages. I've checked serial
> port settings, seems to be correct. What else may be the issue?

First could you give us few information as which CPU, Target and U-Boot
version do you work on?

Best Regards,
J.