[U-Boot-Users] NAND driver updates

[Stefan Roese]

On Thursday 10 January 2008, Stefan Roese wrote:
> > New:
> > ...
> > FLASH:  1 MB
> > NAND:  NAND device: Manufacturer ID: 0xec, Chip ID: 0x75 (Samsung NAND
> > 32MiB 3,3V 8-bit) Scanning device for bad blocks
> > Bad eraseblock 261 at 0x00414000
> > Bad eraseblock 352 at 0x00580000
> > Bad eraseblock 846 at 0x00d38000
> > Bad eraseblock 848 at 0x00d40000
> > 32 MiB
> > PCI:   Bus Dev VenId DevId Class Int
> > ...
> >
> > Perhaps we should calme is down by using the option
> > 'CFG_NAND_QUIET_TEST'. Also the formatting of the output is not very
> > pretty.
>
> Yes, we should remove those lines. I suggest to use debug() for here, so
> that they are printed when DEBUG is defined.

I already changed this in the NAND custodian repo.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================