[U-Boot] CFG_64BIT_xxx and friends

[Jean-Christophe PLAGNIOL-VILLARD]

On 01:12 Sun 07 Sep     , Wolfgang Denk wrote:
> Dear Matthias,
> 
> in message <200809041609.26474.matthias.fuchs at esd-electronics.com> you wrote:
> > 
> > after testing the recent U-Boot code on a couple of 405EP boards I noticed,
> > that the memsize in the output of the "bdinfo" command is always 0x00000000.
> > 
> > This is caused by using 64 types and format directives in printf that only 
> > work when CFG_64BIT_VSPRINTF is defined.
> 
> Yeah, that's one more of these ugly bugs.
> 
> > So what's the best way to fix this?
> > Here are four solutions. My favorite is no. 2.
> > 
> > 1) Define CFG_64BIT_STRTOUL for all effected board. 
> > Currently all 405 boards have memsize output as 0 in bdinfo.
> > 
> > 2) Define CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all 4xx boards in
> > include/ppc4xx.h:
> ...
> > 3) Generally define CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all boards.
> > 
> > 4) Use an (ugly) workaround in common/cmd_bdinfo.c:
> 
> I vote for # 5:
> 
> 5) Delete al references to CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL
> and unconditionally enable it for all boards.
> 
> Any takers to submit a patch?
If possible not because it will increase the size of u-boot for board which
not need it. When we will have kconfig it will be simple to activated it for
ppc and other board automaticly.


Best Regards,
J.