[U-Boot] OMAP3: Pending patches

Wolfgang Denk wd at denx.de
Tue Apr 28 00:02:54 CEST 2009


Dear Dirk,

In message <49F5C746.6040204 at googlemail.com> you wrote:
> 
> Short status update after recent merges and patch updates. As usual, 
> please correct if anything is wrong or missing.

Thanks for the summary.

> Dirk Behme wrote:
> > 
> > To avoid loosing the overview, here my list of pending OMAP3 patches 
> > ready to be applied. From my point of view there are no open comments on 
> > these which will prevent to apply them. But please correct if I 
> > overlooked anything or add what (patches? comments?) I missed.
> > 
> > 1. OMAP3: Beagle: Set pinmux conditionally for Rev C boards
> > http://lists.denx.de/pipermail/u-boot/2009-April/051013.html
> 
> Mail
> 
> http://lists.denx.de/pipermail/u-boot/2009-April/051459.html
> 
> tells us that this should be applied to u-boot-arm next. But I can't 
> find it in gitweb
> 
> http://git.denx.de/?p=u-boot/u-boot-arm.git;a=shortlog;h=refs/heads/next
> 
> Did I miss something?

I cannot find it either.

> Btw.: As initial patch and first update was sent ~1 day after merge 
> window close (Apr 4?) I hoped to have a chance to still get it into 
> master ;(

We don't have to bend much to consider this even a bug fix (it fixes a
specific board configuration, doesn't it?).

> > 2. OMAP3: Remove legacy NAND defines
> > http://lists.denx.de/pipermail/u-boot/2009-April/050882.html
> 
> Applied to u-boot-arm next. Request to move to master by Wolfgang.
> 
> > 3. OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000
> > http://lists.denx.de/pipermail/u-boot/2009-April/051178.html
> > 
> > 4. OMAP3: Fix changed mmc init command
> > http://lists.denx.de/pipermail/u-boot/2009-April/051179.html
> 
> Applied to u-boot-arm master.
> 
> > 5. OMAP3: Remove unused board-types
> > http://lists.denx.de/pipermail/u-boot/2009-April/051338.html
> > 
> > 6. OMAP3: Print correct silicon revision
> > http://lists.denx.de/pipermail/u-boot/2009-April/051339.html
> 
> Patches 5 & 6 replaced by update which includes switch to checkboard 
> and print_cpuinfo:
> 
> OMAP3: Board specific updates (3 patches)
> http://lists.denx.de/pipermail/u-boot/2009-April/051505.html
> http://lists.denx.de/pipermail/u-boot/2009-April/051506.html
> http://lists.denx.de/pipermail/u-boot/2009-April/051507.html
> 
> > 7. Zoom2 respin II (10 patches)
> 
> Note: Initial patch series for this was sent 'Wed Apr 1 18:08:38 CEST 
> 2009'
> 
> http://lists.denx.de/pipermail/u-boot/2009-April/050094.html
> 
> IMHO this was while open merge window.
> 
> > http://lists.denx.de/pipermail/u-boot/2009-April/050863.html
> > http://lists.denx.de/pipermail/u-boot/2009-April/050864.html
> > http://lists.denx.de/pipermail/u-boot/2009-April/050865.html
> > http://lists.denx.de/pipermail/u-boot/2009-April/050866.html
> > http://lists.denx.de/pipermail/u-boot/2009-April/050868.html
> > http://lists.denx.de/pipermail/u-boot/2009-April/050867.html
> 
> Applied to u-boot-arm next (see comment about merge window above).
> 
> > http://lists.denx.de/pipermail/u-boot/2009-April/050869.html
> 
> Applied to u-boot-arm next (see comment about merge window above).
> 
> > http://lists.denx.de/pipermail/u-boot/2009-April/050870.html
> > http://lists.denx.de/pipermail/u-boot/2009-April/050871.html
> 
> Applied to u-boot-arm next. Request to move to master by Wolfgang.


I think all the patches listed above could and should go into master
now.

Jean-Cristophe, what do you think? Do you have any specific reasons
for not pulling these into master now?



> > http://lists.denx.de/pipermail/u-boot/2009-April/050872.html
> 
> For the rest of the Zoom2 patches (#1, #2, #3, #4, #5, #8 & #10)
> 
> http://lists.denx.de/pipermail/u-boot/2009-April/051383.html
> http://lists.denx.de/pipermail/u-boot/2009-April/051384.html
> http://lists.denx.de/pipermail/u-boot/2009-April/051385.html
> http://lists.denx.de/pipermail/u-boot/2009-April/051386.html
> http://lists.denx.de/pipermail/u-boot/2009-April/051455.html
> 
> seem to apply.

I'm not sure what you mean here, Dirk. I understand that
Jean-Cristophe requested changes, and we're waiting for a resubmit,
right?



Jean-Cristophe, I really would like to  see  some  progress  in  this
area,  so  I'd appreciate if you could apply the patches listed above
to master and send me a pull request. Thanks.


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Brain off-line, please wait.


More information about the U-Boot mailing list