[U-Boot] Problems with USB mass storage on at91sam9263

Paal Bakken pabakken at online.no
Thu Jan 15 14:43:24 CET 2009


I also found another non-working stick.... This one was also a first generation USB 2.0 stick.

But anyway - It seems like you guys has done a great job and made usb mass storage useful! A few non-working sticks is good enough for me :-)

Best regards

Pål Bakken



> From: Remy Bohmer [linux at bohmer.net]
> Sent: 2009-01-15 13:03:20 CET
> To: Paal Bakken [pabakken at online.no]
> Cc: Jean-Christophe PLAGNIOL-VILLARD [plagnioj at jcrosoft.com], u-boot at lists.denx.de
> Subject: Re: [U-Boot] Problems with USB mass storage on at91sam9263
> 
> Hello,
> 
> > So - I'm willing to rest my case :-) BUT there is something strange, since the "bad" stick works fine in Linux and Windows...
> > -Any ideas about possible reasons for the difference?
> 
> There has been many improvements to the USB stack lately that at least
> it works nowadays on these cores.
> However, there are still a number of bugs to solve, so we are not there yet.
> Besides, the USB stack only supports a single device at a time, and
> does not really support hotplug, it is a completely different USB
> stick than Linux is currently using.
> The FAT driver also only supports read-only.
> 
> So, you cannot really compare the U-boot USB stack with the Linux/Windows stack.
> It shows, however, that there are still bugs in the U-boot USB/FAT code.
> 
> > -Is there any specific known requirements for the sticks (except for FAT)
> 
> FAT32 and VFAT should also work, but if I knew the exact
> 'requirements', I also knew how to solve the bugs...
> 
> 
> Kind Regards,
> 
> Remy
> 


More information about the U-Boot mailing list