[U-Boot] [PATCH v4 6/8] mpc5121: add support for PDM360NG board

[Michael Zaidman]

On Sat, Apr 24, 2010 at 8:27 PM, Anatolij Gustschin <agust at denx.de> wrote:
> PDM360NG is a MPC5121E based board by ifm ecomatic gmbh.
>

[snip]

+#define CONFIG_SYS_INIT_RAM_END                CONFIG_SYS_SRAM_SIZE
/* End of area */
+
+#define CONFIG_SYS_GBL_DATA_SIZE       0x100   /* num bytes of initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - \
+                                        CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_POST_WORD_ADDR      (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)

The CONFIG_SYS_POST_WORD_ADDR is not defined correctly. The base
address is absent.

This will be fixed by POST cleanup consolidated patch anyway.

Regards,
Michael