[U-Boot] Support for MB86R01 cpu

Thirumalai thirumalai.p at datapatterns.co.in
Tue May 18 08:29:03 CEST 2010


Hi Matthias,
        I am going to use u-boot alone for my development. Which debugger is 
suitable for debugging u-boot and initial board bringup activity?
My choice is BDI2000. Is it ok.
Also tell me what toolchains need to be used. Is ELDK supports?
Whether the video driver is available on u-boot ?
-Thirumalai

----- Original Message ----- 
From: "Matthias Weißer" <weisserm at arcor.de>
To: "Thirumalai" <thirumalai.p at datapatterns.co.in>
Cc: <u-boot at lists.denx.de>
Sent: Tuesday, May 18, 2010 11:18 AM
Subject: Re: [U-Boot] Support for MB86R01 cpu


> Hello Thirumalai
>
> Am 18.05.2010 07:37, schrieb Thirumalai:
>> Hi Matthias,
>>          We are using MB86R01 processor in our design. We just want to 
>> know
>> what emulator/debugger can be used for initial board bring-up activity 
>> and
>> also whether the latest u-boot(2010.03) is supporting this processor ?
>
> I recently posted a patch series adding support for MB86R01 to u-boot. I 
> did not receive any comments on V2 so I thinks its more or less fine and I 
> hope it will be merged within the upcoming merge window.
>
> See http://lists.denx.de/pipermail/u-boot/2010-May/071097.html for the 
> initial mail of the patch series.
>
> I am using a BDI2000 (http://www.abatron.ch/products/bdi-family.html) for 
> initial flash programming. A Segger JLink 
> (http://www.segger.com/cms/jlink.html) works also.
>
> Hope this helped.
>
> Matthias 



More information about the U-Boot mailing list