[U-Boot] Is it possible to load the uboot.bin file to RAM area instead FLASH?

[Wolfgang Denk]

Dear Lei Wen,

In message <AANLkTin7zsxVqjKp1Htovf44mtfkNsJR2DF9bSBkTBFR at mail.gmail.com> you wrote:
>
> If your sdram is large enough, or the uboot code is small enough, you don't need
> the dram init. But begin at the TEXT_BASE still is a must.

Hugh?  You _always_ must make sure the RAM has been initialized first.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Perl itself is  usually  pretty  good  about  telling  you  what  you
shouldn't do. :-)     - Larry Wall in <11091 at jpl-devvax.JPL.NASA.GOV>