[U-Boot] No prompt on mx25pdk boot

Hugo Holgersson hugoh at student.chalmers.se
Thu Oct 20 18:42:06 CEST 2011


Hi Fabio!

No I have not, I need to find one SD card. 

Meanwhile, do you have any tips and tricks to aid the debugging on this board? 

For example, can the JTAG-connector of the debug board serve me anyhow? 
Unfortunately, I do not own the Abatron BDI2000 device, I only got the Segger J-Link.

By the way, do you develop within CodeWarrior or any other IDE? 

Regards,

Hugo Holgersson


________________________________________
Från: Fabio Estevam [festevam at gmail.com]
Skickat: den 20 oktober 2011 18:19

Hi Hugo,

On Thu, Oct 20, 2011 at 2:04 PM, Hugo Holgersson
<hugoh at student.chalmers.se> wrote:
> Dear readers,
>
> I have problems running U-Boot on my i.MX 25 PDK board.
>
> I have tried two methods:
>
> (A)
> git clone git://www.denx.de/git/u-boot-imx.git master
> nano board/freescale/mx25pdk/imximage.cfg  # change to BOOT_FROM nand
> make CROSS_COMPILE=arm-none-linux-gnueabi- mx25pdk_config
> make CROSS_COMPILE=arm-none-linux-gnueabi- u-boot.imx
>
> The u-boot.imx is flashed using FreeScale AVK to address 0x400 in NAND. This image does not work (no UART output).

I have only tested booting MX25PDK from the SD card. Does this method
work for you?

Regards,

Fabio Estevam




More information about the U-Boot mailing list