[U-Boot] [PATCH v3] net: allow setting env enetaddr from net device setting
Rob Herring
robherring2 at gmail.com
Thu Feb 2 00:27:34 CET 2012
From: Rob Herring <rob.herring at calxeda.com>
If the net driver has setup a valid ethernet address and an ethernet
address is not set in the environment already, then set the environment
variables from the net driver setting.
This enables pxe booting on boards which don't set ethaddr env variable.
Signed-off-by: Rob Herring <rob.herring at calxeda.com>
---
Wolfgang,
This now prints a warning. If both env and device mac's are set, then the
behavior is unchanged and the env setting is used.
v3:
- print a warning if using mac address from the net device
v2:
- Re-wrote to always setup ethaddr env variables
Rob
doc/README.enetaddr | 4 +++-
net/eth.c | 21 ++++++++++++++++++---
2 files changed, 21 insertions(+), 4 deletions(-)
diff --git a/doc/README.enetaddr b/doc/README.enetaddr
index 2d8e24f..6c61817 100644
--- a/doc/README.enetaddr
+++ b/doc/README.enetaddr
@@ -32,7 +32,9 @@ Correct flow of setting up the MAC address (summarized):
1. Read from hardware in initialize() function
2. Read from environment in net/eth.c after initialize()
-3. Give priority to the value in the environment if a conflict
+3. Write value to environment if setup in struct eth_device->enetaddr by driver
+ initialize() function. Give priority to the value in the environment if a
+ conflict.
4. Program the address into hardware if the following conditions are met:
a) The relevant driver has a 'write_addr' function
b) The user hasn't set an 'ethmacskip' environment variable
diff --git a/net/eth.c b/net/eth.c
index b4b9b43..f75a944 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -62,6 +62,15 @@ int eth_getenv_enetaddr_by_index(const char *base_name, int index,
return eth_getenv_enetaddr(enetvar, enetaddr);
}
+int eth_setenv_enetaddr_by_index(const char *base_name, int index,
+ uchar *enetaddr)
+{
+ char enetvar[32];
+ sprintf(enetvar, index ? "%s%daddr" : "%saddr", base_name, index);
+ return eth_setenv_enetaddr(enetvar, enetaddr);
+}
+
+
static int eth_mac_skip(int index)
{
char enetvar[15];
@@ -175,9 +184,15 @@ int eth_write_hwaddr(struct eth_device *dev, const char *base_name,
unsigned char env_enetaddr[6];
int ret = 0;
- if (!eth_getenv_enetaddr_by_index(base_name, eth_number, env_enetaddr))
- return -1;
-
+ if (!eth_getenv_enetaddr_by_index(base_name, eth_number, env_enetaddr)) {
+ if (!is_valid_ether_addr(dev->enetaddr))
+ return -1;
+ eth_setenv_enetaddr_by_index(base_name, eth_number,
+ dev->enetaddr);
+ printf("\nWarning: %s using MAC address from net device\n",
+ dev->name);
+ return 0;
+ }
if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) {
if (memcmp(dev->enetaddr, "\0\0\0\0\0\0", 6) &&
memcmp(dev->enetaddr, env_enetaddr, 6)) {
--
1.7.5.4
More information about the U-Boot
mailing list