February 2012 Archives by subject
Starting: Wed Feb 1 00:04:31 CET 2012
Ending: Wed Feb 29 23:54:36 CET 2012
Messages: 2068
- [U-Boot] 85xx custodianship
Andy Fleming
- [U-Boot] 85xx custodianship
Mike Frysinger
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Albert ARIBAUD
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Stefano Babic
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Stefano Babic
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Albert ARIBAUD
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Stefano Babic
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Albert ARIBAUD
- [U-Boot] [i2c] Pull request
Wolfgang Denk
- [U-Boot] [i2c] Pull request
Heiko Schocher
- [U-Boot] [i2c] Pull request
Wolfgang Denk
- [U-Boot] [PATCH 0/1] am335x_evm: Change MAINTAINERS
Tom Rini
- [U-Boot] [PATCH 0/2] da850evm: add board specific functions
Manjunath Hadli
- [U-Boot] [PATCH 0/2] da850evm: add board specific functions
Christian Riesch
- [U-Boot] [PATCH 0/2] da850evm: add board specific functions
Hadli, Manjunath
- [U-Boot] [PATCH 0/2] Highbank fixes for 2012.03
Rob Herring
- [U-Boot] [PATCH 0/2] Highbank fixes for 2012.03
Albert ARIBAUD
- [U-Boot] [PATCH 0/2] Highbank fixes for 2012.03
Rob Herring
- [U-Boot] [PATCH 0/2] i.mx28: Elimintated magic numbers for scratch register addresses
Marek Vasut
- [U-Boot] [PATCH 0/2] i.mx28: Elimintated magic numbers for scratch register addresses
robert at delien.nl
- [U-Boot] [PATCH 0/2] i.mx28: Elimintated magic numbers for scratch register addresses
Matthias Fuchs
- [U-Boot] [PATCH 0/2] i.mx28: Elimintated magic numbers for scratch register addresses
Matthias Fuchs
- [U-Boot] [PATCH 0/2] i.mx28: Elimintated magic numbers for scratch register addresses
Stefano Babic
- [U-Boot] [PATCH 0/2] mmc: card status polling fixes
Jan Kloetzke
- [U-Boot] [PATCH 0/2] usb/mx6q: USB EHCI support for MX6Q boards
Wolfgang Grandegger
- [U-Boot] [PATCH 0/3] addition of clocks command for davinci
Manjunath Hadli
- [U-Boot] [PATCH 0/3] mtd/NAND: Support for FSMC controller
Amit Virdi
- [U-Boot] [PATCH 0/3] mxc_spi refactoring (for mx6q and mx6qsabrelite)
Jason Hui
- [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Robert at domain.unknown
- [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Wolfgang Denk
- [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Wolfgang Denk
- [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Fabio Estevam
- [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Albert ARIBAUD
- [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Stefano Babic
- [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Albert ARIBAUD
- [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Fabio Estevam
- [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2
Prafulla Wadaskar
- [U-Boot] [PATCH 0/4] Enable Thumb build for ARM platforms
Aneesh V
- [U-Boot] [PATCH 0/4] i.MX28: Small correction to pin configuration
robert at delien.nl
- [U-Boot] [PATCH 0/4] USB cleanup
Marek Vasut
- [U-Boot] [PATCH 0/4] USB: Add support for designware UDC
Amit Virdi
- [U-Boot] [PATCH 0/4] USB: Add support for designware UDC
Amit Virdi
- [U-Boot] [PATCH 0/5] Support for qualcomm msm7630 board
mohamed.haneef at lntinfotech.com
- [U-Boot] [PATCH 0/6] Highbank platform updates
Rob Herring
- [U-Boot] [PATCH 0/6] Highbank platform updates
Albert ARIBAUD
- [U-Boot] [PATCH 0/6] Highbank platform updates
Rob Herring
- [U-Boot] [PATCH 0/7] net/designware: Bug fixes
Amit Virdi
- [U-Boot] [PATCH 0/7] Set of various i.MX28 patches
Marek Vasut
- [U-Boot] [PATCH 0/9] Fix a few warnings that bug me
Simon Glass
- [U-Boot] [PATCH 0/9] Fix a few warnings that bug me
Stefano Babic
- [U-Boot] [PATCH 0/9] Fix a few warnings that bug me
Stefano Babic
- [U-Boot] [PATCH 0/9] Fix a few warnings that bug me
Mike Frysinger
- [U-Boot] [PATCH 0/9] Fix a few warnings that bug me
Stefano Babic
- [U-Boot] [PATCH 0/9] Fix a few warnings that bug me
Simon Glass
- [U-Boot] [PATCH 0/9] Fix a few warnings that bug me
Mike Frysinger
- [U-Boot] [PATCH 0/9] Fix a few warnings that bug me
Stefano Babic
- [U-Boot] [PATCH 00/11] mtd/SMI: Add support for ST SMI controller
Amit Virdi
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Pali Rohár
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Marek Vasut
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Pali Rohár
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Marek Vasut
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Mike Frysinger
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Pali Rohár
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Marek Vasut
- [U-Boot] [PATCH 00/17] OMAP5: Add the Changes required for OMAP5 ES1.0 silicon.
R Sricharan
- [U-Boot] [PATCH 00/28] Add link-local addressing support
Mike Frysinger
- [U-Boot] [PATCH 00/28] Add link-local addressing support
Stefano Babic
- [U-Boot] [PATCH 00/28] Add link-local addressing support
Mike Frysinger
- [U-Boot] [PATCH 01/11] st_smi: Add support for SPEAr SMI driver
Amit Virdi
- [U-Boot] [PATCH 01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only
Pali Rohár
- [U-Boot] [PATCH 01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only
Marek Vasut
- [U-Boot] [PATCH 01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only
Tom Rini
- [U-Boot] [PATCH 01/17] OMAP5: clocks: Change clock settings as required for ES1.0 silicon.
R Sricharan
- [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface
Mike Frysinger
- [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface
Mike Frysinger
- [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface
Joe Hershberger
- [U-Boot] [PATCH 02/11] st_smi: Remove compilation warning
Amit Virdi
- [U-Boot] [PATCH 02/17] OMAP5: board: Add pinmux data for omap5_evm board.
R Sricharan
- [U-Boot] [PATCH 02/28] net: cosmetic: checkpatch compliance
Mike Frysinger
- [U-Boot] [PATCH 03/11] st_smi: Return error in case TFF is not set
Stefan Roese
- [U-Boot] [PATCH 03/11] st_smi: Return error in case TFF is not set
Amit Virdi
- [U-Boot] [PATCH 03/11] st_smi: Return error in case TFF is not set
Amit Virdi
- [U-Boot] [PATCH 03/17] omap5: io: Configure the io settings for omap5430 sevm board.
R Sricharan
- [U-Boot] [PATCH 03/28] net: Move mv64x6x_eth_initialize() to board_eth_init()
Mike Frysinger
- [U-Boot] [PATCH 03/28] net: Move mv64x6x_eth_initialize() to board_eth_init()
Stefan Roese
- [U-Boot] [PATCH 04/11] st_smi: Change SMI timeout values
Amit Virdi
- [U-Boot] [PATCH 04/14] Fix function readline in main.c
Mike Frysinger
- [U-Boot] [PATCH 04/17] OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.
R Sricharan
- [U-Boot] [PATCH 04/17] OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.
Tom Rini
- [U-Boot] [PATCH 04/17] OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.
R, Sricharan
- [U-Boot] [PATCH 04/28] net: Make the MAC-seeded random number generator available to /net
Mike Frysinger
- [U-Boot] [PATCH 04/28] net: Make the MAC-seeded random number generator available to /net
Mike Frysinger
- [U-Boot] [PATCH 04/28] net: Make the MAC-seeded random number generator available to /net
Joe Hershberger
- [U-Boot] [PATCH 05/11] st_smi: Enhance the error handling
Amit Virdi
- [U-Boot] [PATCH 05/15] common/main.c: Fix function readline
Mike Frysinger
- [U-Boot] [PATCH 05/15] common/main.c: Fix function readline
Pali Rohár
- [U-Boot] [PATCH 05/15] common/main.c: Fix function readline
Mike Frysinger
- [U-Boot] [PATCH 05/17] OMAP5: palmas: Configure nominal opp vdd values
R Sricharan
- [U-Boot] [PATCH 05/28] net: Move CDP out of net.c
Mike Frysinger
- [U-Boot] [PATCH 06/11] st_smi: Read status until timeout happens
Amit Virdi
- [U-Boot] [PATCH 06/17] OMAP5: hwinit: Add the missing break statement
R Sricharan
- [U-Boot] [PATCH 06/28] net: Move ARP out of net.c
Mike Frysinger
- [U-Boot] [PATCH 07/11] st_smi: Move status register read before modifying ctrl register
Amit Virdi
- [U-Boot] [PATCH 07/17] OMAP4/5: Make the silicon revision variable common.
R Sricharan
- [U-Boot] [PATCH 07/28] net: Move PING out of net.c
Mike Frysinger
- [U-Boot] [PATCH 07/28] net: Move PING out of net.c
Mike Frysinger
- [U-Boot] [PATCH 07/28] net: Move PING out of net.c
Mike Frysinger
- [U-Boot] [PATCH 07/28] net: Move PING out of net.c
Joe Hershberger
- [U-Boot] [PATCH 07/28] net: Move PING out of net.c
Mike Frysinger
- [U-Boot] [PATCH 08/11] st_smi: Fix smi read status
Amit Virdi
- [U-Boot] [PATCH 08/17] OMAP5: SRAM: Change the SRAM base address.
R Sricharan
- [U-Boot] [PATCH 08/28] net: Move RARP receive logic out of net.c
Mike Frysinger
- [U-Boot] [PATCH 09/11] st_smi: Removed no needed dependency on ST_M25Pxx_ID
Amit Virdi
- [U-Boot] [PATCH 09/14] New command clear: Clear the ANSI terminal
Mike Frysinger
- [U-Boot] [PATCH 09/17] OMAP4/5: Make the sysctrl structure common
R Sricharan
- [U-Boot] [PATCH 09/28] net: cosmetic: Un-typedef variables in net
Mike Frysinger
- [U-Boot] [PATCH 09/28] net: cosmetic: Un-typedef variables in net
Joe Hershberger
- [U-Boot] [PATCH 1/1] arm: mmc: omap: spl size reduction by removing write/erase ops
Balaji T K
- [U-Boot] [PATCH 1/1] arm: mmc: omap: spl size reduction by removing write/erase ops
Tom Rini
- [U-Boot] [PATCH 1/1] arm: mmc: omap: spl size reduction by removing write/erase ops
Aneesh V
- [U-Boot] [PATCH 1/1] arm: mmc: omap: spl size reduction by removing write/erase ops
Tom Rini
- [U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO
Bud Miljkovic
- [U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO
Jason Liu
- [U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO
Stefano Babic
- [U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO
Bud Miljkovic
- [U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO
Marek Vasut
- [U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO
Stefano Babic
- [U-Boot] [PATCH 1/1] nios2 - adjust gbl data off to account for bd_info
Alex Hornung
- [U-Boot] [PATCH 1/1] nios2 - adjust gbl data off to account for bd_info
Mike Frysinger
- [U-Boot] [PATCH 1/1] nios2 - adjust gbl data off to account for bd_info
Thomas Chou
- [U-Boot] [PATCH 1/1] nios2 - adjust gbl data off to account for bd_info
Graeme Russ
- [U-Boot] [PATCH 1/1] nios2 - adjust gbl data off to account for bd_info
Alex Hornung
- [U-Boot] [PATCH 1/1] nios2 - adjust gbl data off to account for bd_info
Graeme Russ
- [PATCH 1/1] nios2-generic: Fix logic around choosing UART
Alex Hornung
- [U-Boot] [PATCH 1/2 V3] arm926: Flush the data cache before disabling it
Christian Riesch
- [U-Boot] [PATCH 1/2 V3] arm926: Flush the data cache before disabling it
Albert ARIBAUD
- [U-Boot] [PATCH 1/2 V4] arm926: Flush the data cache before disabling it
Albert ARIBAUD
- [U-Boot] [PATCH 1/2] Add run_command_list() to run a list of commands
Simon Glass
- [U-Boot] [PATCH 1/2] Add run_command_list() to run a list of commands
Michael Walle
- [U-Boot] [PATCH 1/2] Add run_command_list() to run a list of commands
Simon Glass
- [U-Boot] [PATCH 1/2] Add run_command_list() to run a list of commands
Michael Walle
- [U-Boot] [PATCH 1/2] Add run_command_list() to run a list of commands
Simon Glass
- [U-Boot] [PATCH 1/2] arm/km: speed up i2c access for keymile boards
Holger Brunck
- [U-Boot] [PATCH 1/2] arm/km: speed up i2c access for keymile boards
Prafulla Wadaskar
- [U-Boot] [PATCH 1/2] ARM: highbank: fix warning for calxedaxgmac_initialize
Rob Herring
- [U-Boot] [PATCH 1/2] at91: modified NAND flash timing on meesc board
Albert ARIBAUD
- [U-Boot] [PATCH 1/2] at91: modified NAND flash timing on meesc board
Daniel Gorsulowski
- [U-Boot] [PATCH 1/2] at91: modified NAND flash timing on meesc board
Albert ARIBAUD
- [U-Boot] [PATCH 1/2] command, log: Coding Style cleanup
Heiko Schocher
- [U-Boot] [PATCH 1/2] command, log: Coding Style cleanup
Detlev Zundel
- [U-Boot] [PATCH 1/2] command, log: Coding Style cleanup
Heiko Schocher
- [U-Boot] [PATCH 1/2] da850evm: add support to read mac address from spi flash
Mike Frysinger
- [U-Boot] [PATCH 1/2] da850evm: add support to read mac address from spi flash
Manjunath Hadli
- [U-Boot] [PATCH 1/2] easylogo: add lzma support
Mike Frysinger
- [U-Boot] [PATCH 1/2] i.mx28: Added register definitions for DIGCTL registers
Marek Vasut
- [U-Boot] [PATCH 1/2] i.mx28: Added register definitions for DIGCTL registers
robert at delien.nl
- [U-Boot] [PATCH 1/2] i.mx28: Added register definitions for DIGCTL registers
Robert Deliën
- [U-Boot] [PATCH 1/2] i.mx28: Added register definitions for DIGCTL registers
Stefano Babic
- [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup
Fabio Estevam
- [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup
Fabio Estevam
- [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup
Fabio Estevam
- [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 1/2] i.MX28: Reformat the DRAM memory configuration data
Marek Vasut
- [U-Boot] [PATCH 1/2] image: add support for Android's boot image format
Tom Rini
- [U-Boot] [PATCH 1/2] image: add support for Android's boot image format
Aneesh V
- [U-Boot] [PATCH 1/2] mmc: fix card busy polling
Jan Kloetzke
- [U-Boot] [PATCH 1/2] mx35pdk: Remove duplicate CPU revision and reset cause information
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx35pdk: Remove duplicate CPU revision and reset cause information
Stefano Babic
- [U-Boot] [PATCH 1/2] mx35pdk: Remove duplicate CPU revision and reset cause information
Stefano Babic
- [U-Boot] [PATCH 1/2] nios2-generic: Fix logic around choosing UART
Alex Hornung
- [U-Boot] [PATCH 1/2] nios2-generic: Fix logic around choosing UART
Thomas Chou
- [U-Boot] [PATCH 1/2] nios2-generic: Fix logic around choosing UART
Alex Hornung
- [U-Boot] [PATCH 1/2] openrisc/bitops: add hweightX defines
Stefan Kristiansson
- [U-Boot] [PATCH 1/2] openrisc/bitops: add hweightX defines
Stefan Kristiansson
- [U-Boot] [PATCH 1/2] openrisc/bitops: add hweightX defines
Marek Vasut
- [U-Boot] [PATCH 1/2] openrisc/bitops: add hweightX defines
Mike Frysinger
- [U-Boot] [PATCH 1/2] openrisc/bitops: add hweightX defines
Marek Vasut
- [U-Boot] [PATCH 1/2] openrisc/bitops: add hweightX defines
Graeme Russ
- [U-Boot] [PATCH 1/2] powerpc/85xx:Avoid hardcoded vector address for IVORs
Prabhakar Kushwaha
- [U-Boot] [PATCH 1/2] powerpc/p2041rdb: add NAND and NAND boot support
Shaohui Xie
- [U-Boot] [PATCH 1/2] Revert "ARM: AM33XX: Add AM33XX I2C driver support"
tom.rini at gmail.com
- [U-Boot] [PATCH 1/2] Revert "ARM: AM33XX: Add AM33XX I2C driver support"
Heiko Schocher
- [U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds
Troy Kisky
- [U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds
Mike Frysinger
- [U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds
Graeme Russ
- [U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds
Mike Frysinger
- [U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds
Graeme Russ
- [U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds
Mike Frysinger
- [U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds
Graeme Russ
- [U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds
Mike Frysinger
- [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support
Christian Riesch
- [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support
Wolfgang Denk
- [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support
Tom Rini
- [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support
Tom Rini
- [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support
Scott Wood
- [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support
Tom Rini
- [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support
Wolfgang Denk
- [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support
Tom Rini
- [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support
Wolfgang Denk
- [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support
Wolfgang Denk
- [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support
Wolfgang Denk
- [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support
Tom Rini
- [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support
Tom Rini
- [U-Boot] [PATCH 1/2] usb/ehci: Add USB support for the MX6Q
Wolfgang Grandegger
- [U-Boot] [PATCH 1/2] usb/ehci: Add USB support for the MX6Q
Dirk Behme
- [U-Boot] [PATCH 1/2] usb: align buffers at cacheline
Puneet Saxena
- [U-Boot] [PATCH 1/2] usb: align buffers at cacheline
Mike Frysinger
- [U-Boot] [PATCH 1/2] usb: align buffers at cacheline
puneets
- [U-Boot] [PATCH 1/2] usb: align buffers at cacheline
Simon Glass
- [U-Boot] [PATCH 1/2] usb: align buffers at cacheline
puneets
- [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 1/3 v2] common: add possibility for readline_into_buffer timeout
Mike Frysinger
- [U-Boot] [PATCH 1/3 v2] common: add possibility for readline_into_buffer timeout
Stephan Linz
- [U-Boot] [PATCH 1/3 v8] arm926ejs: add NXP LPC32x0 cpu series support
Albert ARIBAUD
- [U-Boot] [PATCH 1/3 v8] arm926ejs: add NXP LPC32x0 cpu series support
Vladimir Zapolskiy
- [U-Boot] [PATCH 1/3 v8] arm926ejs: add NXP LPC32x0 cpu series support
Albert ARIBAUD
- [U-Boot] [PATCH 1/3] davinci: move clock related functions to new file
Manjunath Hadli
- [U-Boot] [PATCH 1/3] davinci: move clock related functions to new file
Sughosh Ganu
- [U-Boot] [PATCH 1/3] doc: complete, typos
Peter Meerwald
- [U-Boot] [PATCH 1/3] doc: complete, typos
Mike Frysinger
- [U-Boot] [PATCH 1/3] doc: complete, typos
Marek Vasut
- [U-Boot] [PATCH 1/3] mtd/NAND: Add FSMC driver support
Amit Virdi
- [U-Boot] [PATCH 1/3] mx28evk: add RTC support
Fabio Estevam
- [U-Boot] [PATCH 1/3] mx28evk: add RTC support
Stefano Babic
- [U-Boot] [PATCH 1/3] mx28evk: add RTC support
Stefano Babic
- [U-Boot] [PATCH 1/3] MX35: add missing get_ticks() and get_tbclk()
Stefano Babic
- [U-Boot] [PATCH 1/3] sandbox: add concept of sandbox state
Mike Frysinger
- [U-Boot] [PATCH 1/3] sandbox: add concept of sandbox state
Simon Glass
- [U-Boot] [PATCH 1/3] tt01: fix environment size
Stefano Babic
- [U-Boot] [PATCH 1/3] USB: Armada100: Add UTMI PHY interface driver
Marek Vasut
- [U-Boot] [PATCH 1/4 v3] i.MX28: Fix ref_cpu clock setup
robert at delien.nl
- [U-Boot] [PATCH 1/4 v4] Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8
robert at delien.nl
- [U-Boot] [PATCH 1/4 v5] Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8
Wolfgang Denk
- [U-Boot] [PATCH 1/4 v5] Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8
Wolfgang Denk
- [U-Boot] [PATCH 1/4 v5] Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8
Robert at domain.unknown
- [U-Boot] [PATCH 1/4 v5] Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8
Robert Deliën
- [U-Boot] [PATCH 1/4] ARM: enable Thumb build
Aneesh V
- [U-Boot] [PATCH 1/4] Debug UART pins configured to 3v3, instead of 1v8
robert at delien.nl
- [U-Boot] [PATCH 1/4] doc: Add documentation for mpc85xx debugger support
Prabhakar Kushwaha
- [U-Boot] [PATCH 1/4] net: ll_temac: Add LL TEMAC driver to u-boot
Stephan Linz
- [U-Boot] [PATCH 1/4] SMDK5250: LPDDR2: Renaming the dmc_init.c file to dmc_init_lpddr2.c
Hatim Ali
- [U-Boot] [PATCH 1/4] USB: Staticize internal functions
Marek Vasut
- [U-Boot] [PATCH 1/4] USB: Staticize internal functions
Mike Frysinger
- [U-Boot] [PATCH 1/4] USB:gadget:designware USB device controller (UDC) implementation
Amit Virdi
- [U-Boot] [PATCH 1/5 v2.1] sandbox: add lseek helper
Mike Frysinger
- [U-Boot] [PATCH 1/5 v2.1] sandbox: add lseek helper
Simon Glass
- [U-Boot] [PATCH 1/5 v2.2] sandbox: add lseek helper
Mike Frysinger
- [U-Boot] [PATCH 1/5 v2] sandbox: add lseek helper
Simon Glass
- [U-Boot] [PATCH 1/5 v2] sandbox: add lseek helper
Mike Frysinger
- [U-Boot] [PATCH 1/5] msm7x30: Add support for low speed uart on msm7x30
mohamed.haneef at lntinfotech.com
- [U-Boot] [PATCH 1/5] msm7x30: Add support for low speed uart on msm7x30
Albert ARIBAUD
- [U-Boot] [PATCH 1/5] mx31ads: Provide proper range for memtest
Fabio Estevam
- [U-Boot] [PATCH 1/5] mx31ads: Provide proper range for memtest
Marek Vasut
- [U-Boot] [PATCH 1/5] mx31pdk: Fix CONFIG_SYS_MEMTEST_END
Fabio Estevam
- [U-Boot] [PATCH 1/5] mx53loco: Use gpio_direction_input prior to gpio_get_value
Stefano Babic
- [U-Boot] [PATCH 1/5] mx53loco: Use gpio_direction_input prior to gpio_get_value
Fabio Estevam
- [U-Boot] [PATCH 1/5] mx53loco: Use gpio_direction_input prior to gpio_get_value
Stefano Babic
- [U-Boot] [PATCH 1/5] mx53loco: Use gpio_direction_input prior to gpio_get_value
Jason Liu
- [U-Boot] [PATCH 1/5] mx53loco: Use gpio_direction_input prior to gpio_get_value
Stefano Babic
- [U-Boot] [PATCH 1/5] mx53loco: Use gpio_direction_input prior to gpio_get_value
Fabio Estevam
- [U-Boot] [PATCH 1/5] SMDK5250: LPDDR2: Renaming the dmc_init.c file to dmc_init_lpddr2.c
Hatim Ali
- [U-Boot] [PATCH 1/6] .gitignore: Add .su files
Tom Rini
- [U-Boot] [PATCH 1/6] .gitignore: Add .su files
Mike Frysinger
- [U-Boot] [PATCH 1/6] ARM: highbank: fix us_to_tick calculation
Rob Herring
- [U-Boot] [PATCH 1/7] M28: Fix LCD PINMUX
Marek Vasut
- [U-Boot] [PATCH 1/7] net/designware: Fix to restore hw mac address
Mike Frysinger
- [U-Boot] [PATCH 1/7] net/designware: Fix to restore hw mac address
Amit Virdi
- [U-Boot] [PATCH 1/8] net: ll_temac: Add LL TEMAC driver to u-boot
Michal Simek
- [U-Boot] [PATCH 1/9] Define UART4 and UART5 base addresses
Stefano Babic
- [U-Boot] [PATCH 10/11] st_smi: Change the flash probing method
Amit Virdi
- [U-Boot] [PATCH 10/14] New config variable CONFIG_MENUCMD
Mike Frysinger
- [U-Boot] [PATCH 10/17] arm: Add control over cachability of memory regions
Albert ARIBAUD
- [U-Boot] [PATCH 10/17] OMAP4/5: device: Add support to get the device type.
R Sricharan
- [U-Boot] [PATCH 10/28] net: cosmetic: Improve variable names and code readability
Mike Frysinger
- [U-Boot] [PATCH 10/28] net: cosmetic: Improve variable names and code readability
Mike Frysinger
- [U-Boot] [PATCH 11/11] st_smi: Fix bug in flash_print_info()
Amit Virdi
- [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR
Mike Frysinger
- [U-Boot] [PATCH 11/17] OMAP5: defconfig: Align the defconfig for 5430 ES1.0
R Sricharan
- [U-Boot] [PATCH 11/17] OMAP5: defconfig: Align the defconfig for 5430 ES1.0
Tom Rini
- [U-Boot] [PATCH 11/17] OMAP5: defconfig: Align the defconfig for 5430 ES1.0
R, Sricharan
- [U-Boot] [PATCH 11/17] OMAP5: defconfig: Align the defconfig for 5430 ES1.0
Tom Rini
- [U-Boot] [PATCH 11/17] OMAP5: defconfig: Align the defconfig for 5430 ES1.0
R, Sricharan
- [U-Boot] [PATCH 11/28] net: Refactor IP, UPD, and ICMP header writing functions
Mike Frysinger
- [U-Boot] [PATCH 12/17] OMAP5: ddr: Change the ddr device name.
R Sricharan
- [U-Boot] [PATCH 12/28] net: Refactor packet length computations
Mike Frysinger
- [U-Boot] [PATCH 13/14] New command bootmenu: ANSI terminal Boot Menu support
Mike Frysinger
- [U-Boot] [PATCH 13/17] OMAP4/5: emif: Correct the emif power mgt shadow register bit fields.
R Sricharan
- [U-Boot] [PATCH 13/28] net: Refactor bootp packet length computations
Mike Frysinger
- [U-Boot] [PATCH 14/17] arm: omap5: correct boot device mode7 for eMMC
R Sricharan
- [U-Boot] [PATCH 14/28] net: Refactor ping recieve handler
Mike Frysinger
- [U-Boot] [PATCH 15/17] power: twl6035: add palmas PMIC support
R Sricharan
- [U-Boot] [PATCH 15/17] power: twl6035: add palmas PMIC support
Tom Rini
- [U-Boot] [PATCH 15/17] power: twl6035: add palmas PMIC support
R, Sricharan
- [U-Boot] [PATCH 15/28] net: Refactor to call NetSendPacket() instead of calling eth_send()
Mike Frysinger
- [U-Boot] [PATCH 16/17] omap5: pbias ldo9 turn on
R Sricharan
- [U-Boot] [PATCH 16/17] omap5: pbias ldo9 turn on
Tom Rini
- [U-Boot] [PATCH 16/28] net: Refactor to protect access to the NetState variable
Mike Frysinger
- [U-Boot] [PATCH 17/17] mmc: omap5evm: Add eMMC saveenv support
R Sricharan
- [U-Boot] [PATCH 17/28] net: Refactor to separate the UDP handler from the ARP handler
Mike Frysinger
- [U-Boot] [PATCH 17/28] net: Refactor to separate the UDP handler from the ARP handler
Mike Frysinger
- [U-Boot] [PATCH 17/28] net: Refactor to separate the UDP handler from the ARP handler
Joe Hershberger
- [U-Boot] [PATCH 18/28] net: Add NetUpdateEther() to handle ARP or Ping replies (VLAN or SNAP)
Mike Frysinger
- [U-Boot] [PATCH 18/28] net: Add NetUpdateEther() to handle ARP or Ping replies (VLAN or SNAP)
Joe Hershberger
- [U-Boot] [PATCH 19/28] net: Don't write the "serverip" env var if told not to in the config
Mike Frysinger
- [U-Boot] [PATCH 2/2] Allow newlines within command environment vars
Wolfgang Denk
- [U-Boot] [PATCH 2/2] Allow newlines within command environment vars
Simon Glass
- [U-Boot] [PATCH 2/2] Allow newlines within command environment vars
Wolfgang Denk
- [U-Boot] [PATCH 2/2] Allow newlines within command environment vars
Simon Glass
- [U-Boot] [PATCH 2/2] Allow newlines within command environment vars
Simon Glass
- [U-Boot] [PATCH 2/2] ARM: highbank: add missing get_tbclk
Rob Herring
- [U-Boot] [PATCH 2/2] at91: modified NAND flash timing on otc570 board
Albert ARIBAUD
- [U-Boot] [PATCH 2/2] Blackfin: easylogo: add lzma logos
Mike Frysinger
- [U-Boot] [PATCH 2/2] Blackfin: easylogo: add lzma logos
Marek Vasut
- [U-Boot] [PATCH 2/2] Blackfin: easylogo: add lzma logos
Mike Frysinger
- [U-Boot] [PATCH 2/2] Blackfin: easylogo: add lzma logos
Marek Vasut
- [U-Boot] [PATCH 2/2] Blackfin: easylogo: add lzma logos
Mike Frysinger
- [U-Boot] [PATCH 2/2] command, log: print log->v2.con value in the "log info" command
Heiko Schocher
- [U-Boot] [PATCH 2/2] command, log: print log->v2.con value in the "log info" command
Detlev Zundel
- [U-Boot] [PATCH 2/2] da850evm: read mac address from I2C EEPROM on AM18x EVM
Wolfgang Denk
- [U-Boot] [PATCH 2/2] da850evm: read mac address from I2C EEPROM on AM18x EVM
Wolfgang Denk
- [U-Boot] [PATCH 2/2] da850evm: read mac address from I2C EEPROM on AM18x EVM
Manjunath Hadli
- [U-Boot] [PATCH 2/2] da850evm: read mac address from I2C EEPROM on AM18x EVM
Hadli, Manjunath
- [U-Boot] [PATCH 2/2] i.MX28: Enable additional DRAM address bits
Marek Vasut
- [U-Boot] [PATCH 2/2] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 2/2] i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH 2/2] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 2/2] i.mx28: Replaced magic numbers for scratch register addresses with register definitions
robert at delien.nl
- [U-Boot] [PATCH 2/2] i.mx28: Replaced magic numbers for scratch register addresses with register definitions
Marek Vasut
- [U-Boot] [PATCH 2/2] i.mx28: Replaced magic numbers for scratch register addresses with register definitions
Stefano Babic
- [U-Boot] [PATCH 2/2] mmc: make mmc_send_status() more reliable
Jan Kloetzke
- [U-Boot] [PATCH 2/2] mx35: generic: Let get_reset_cause be defined only when CONFIG_DISPLAY_CPUINFO is selected
Fabio Estevam
- [U-Boot] [PATCH 2/2] mx35: generic: Let get_reset_cause be defined only when CONFIG_DISPLAY_CPUINFO is selected
Stefano Babic
- [U-Boot] [PATCH 2/2] mx6qsabrelite: add and enable USB Host 1 support
Wolfgang Grandegger
- [U-Boot] [PATCH 2/2] mx6qsabrelite: add and enable USB Host 1 support
Fabio Estevam
- [U-Boot] [PATCH 2/2] mx6qsabrelite: add and enable USB Host 1 support
Dirk Behme
- [U-Boot] [PATCH 2/2] mx6qsabrelite: add and enable USB Host 1 support
Wolfgang Grandegger
- [U-Boot] [PATCH 2/2] nios2: implement get_ticks and get_tbclk
Alex Hornung
- [U-Boot] [PATCH 2/2] nios2: implement get_ticks and get_tbclk
Thomas Chou
- [U-Boot] [PATCH 2/2] omap3logic: Add missing GPMC pinmux for LAN92xx access
Peter Barada
- [U-Boot] [PATCH 2/2] powerpc/85xx:Fix IVORs addr after vector table relocation
Prabhakar Kushwaha
- [U-Boot] [PATCH 2/2] powerpc/p2041rdb: add env in NAND support
Shaohui Xie
- [U-Boot] [PATCH 2/2] Revert "ARM: I2C: I2C Multi byte address support"
tom.rini at gmail.com
- [U-Boot] [PATCH 2/2] Revert "ARM: I2C: I2C Multi byte address support"
Heiko Schocher
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Troy Kisky
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Mike Frysinger
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Dirk Behme
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Albert ARIBAUD
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Mike Frysinger
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Troy Kisky
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Mike Frysinger
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Troy Kisky
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Albert ARIBAUD
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Albert ARIBAUD
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Mike Frysinger
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Albert ARIBAUD
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Troy Kisky
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Mike Frysinger
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Mike Frysinger
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Albert ARIBAUD
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Mike Frysinger
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Albert ARIBAUD
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Mike Frysinger
- [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
Albert ARIBAUD
- [U-Boot] [PATCH 2/2] usb: Add quirk "USB_QUIRK_STRING_FETCH_255"
Puneet Saxena
- [U-Boot] [PATCH 2/2] usb: Add quirk "USB_QUIRK_STRING_FETCH_255"
Tom Rini
- [U-Boot] [PATCH 2/2] usb: Add quirk "USB_QUIRK_STRING_FETCH_255"
Tom Warren
- [U-Boot] [PATCH 2/2] usb: Add quirk "USB_QUIRK_STRING_FETCH_255"
puneets
- [U-Boot] [PATCH 2/2][v2] powerpc/85xx:Add PSC9131 RDB Support
Prabhakar Kushwaha
- [U-Boot] [PATCH 2/3] cmd_eeprom: typo
Peter Meerwald
- [U-Boot] [PATCH 2/3] cmd_eeprom: typo
Mike Frysinger
- [U-Boot] [PATCH 2/3] davinci: remove macro CONFIG_DISPLAY_CPUINFO
Manjunath Hadli
- [U-Boot] [PATCH 2/3] mx28evk: add USB support
Stefano Babic
- [U-Boot] [PATCH 2/3] MX31: add missing get_tbclk()
Stefano Babic
- [U-Boot] [PATCH 2/3] sandbox: allow processing before main loop
Mike Frysinger
- [U-Boot] [PATCH 2/3] sandbox: allow processing before main loop
Simon Glass
- [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface
Stefan Roese
- [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface
Amit Virdi
- [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface
Scott Wood
- [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface
Amit Virdi
- [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface
Amit Virdi
- [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface
Scott Wood
- [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface
Amit Virdi
- [U-Boot] [PATCH 2/3] tt01: add video support
Stefano Babic
- [U-Boot] [PATCH 2/4 v3] i.MX28: Fix ref_cpu clock setup
robert at delien.nl
- [U-Boot] [PATCH 2/4 v3] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 2/4 v4] Introducing 8-bit wide register, mx28_register_8
robert at delien.nl
- [U-Boot] [PATCH 2/4 v5] Introducing 8-bit wide register, mx28_register_8
Robert at domain.unknown
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Aneesh V
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Aneesh V
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Mike Frysinger
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Albert ARIBAUD
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Aneesh V
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Albert ARIBAUD
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Aneesh V
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Albert ARIBAUD
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Simon Glass
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Mike Frysinger
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Aneesh V
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Simon Glass
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Mike Frysinger
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Mike Frysinger
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Simon Glass
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Mike Frysinger
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Mike Frysinger
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Aneesh V
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Aneesh V
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Albert ARIBAUD
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Tom Rini
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Tom Rini
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Aneesh V
- [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions
Aneesh V
- [U-Boot] [PATCH 2/4] Correction to SSP0 drive strengths
robert at delien.nl
- [U-Boot] [PATCH 2/4] microblaze: Enable several ethernet driver compilation
Stephan Linz
- [U-Boot] [PATCH 2/4] microblaze: Enable several ethernet driver compilation
Stephan Linz
- [U-Boot] [PATCH 2/4] net: fec_mxc: add PHYLIB support
Andy Fleming
- [U-Boot] [PATCH 2/4] net: fec_mxc: add PHYLIB support
Troy Kisky
- [U-Boot] [PATCH 2/4] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger
Prabhakar Kushwaha
- [U-Boot] [PATCH 2/4] SMDK5250: LPDDR2: Renaming the PHY_RESET_VAL macro and fixing a minor typo.
Hatim Ali
- [U-Boot] [PATCH 2/4] USB: Separate out USB hub driver
Marek Vasut
- [U-Boot] [PATCH 2/4] USB: Separate out USB hub driver
Mike Frysinger
- [U-Boot] [PATCH 2/4] USB: Separate out USB hub driver
Marek Vasut
- [U-Boot] [PATCH 2/4] USB:gadget:designware Device controller bugfixes
Amit Virdi
- [U-Boot] [PATCH 2/5] msm7x30: Add support for interprocessor communication
mohamed.haneef at lntinfotech.com
- [U-Boot] [PATCH 2/5] msm7x30: Add support for interprocessor communication
Albert ARIBAUD
- [U-Boot] [PATCH 2/5] mx35pdk: Provide proper range for memtest
Fabio Estevam
- [U-Boot] [PATCH 2/5] mx35pdk: Provide proper range for memtest
Stefano Babic
- [U-Boot] [PATCH 2/5] mx51evk: Fix CONFIG_SYS_MEMTEST_END
Fabio Estevam
- [U-Boot] [PATCH 2/5] mx53ard: Use gpio_direction_input prior to gpio_get_value
Fabio Estevam
- [U-Boot] [PATCH 2/5] mx53ard: Use gpio_direction_input prior to gpio_get_value
Stefano Babic
- [U-Boot] [PATCH 2/5] SMDK5250: LPDDR2: Renaming the PHY_RESET_VAL macro and fixing a minor typo.
Hatim Ali
- [U-Boot] [PATCH 2/6] ARM: highbank: change TEXT_BASE to 0x8000
Rob Herring
- [U-Boot] [PATCH 2/6] config.mk: Make cc-option create a file under include/generated
Tom Rini
- [U-Boot] [PATCH 2/7] M28: Support for the old M28 SoM v1.0
Marek Vasut
- [U-Boot] [PATCH 2/7] net/designware: Fix the max frame length size
Amit Virdi
- [U-Boot] [PATCH 2/8] microblaze: Enable several ethernet driver compilation
Michal Simek
- [U-Boot] [PATCH 2/9] NET: fec_mxc.c: Add support for MII for MX5 SOCs
Stefano Babic
- [U-Boot] [PATCH 20/28] net: Fix compile warning if CONFIG_BOOTP_SERVERIP is not defined
Mike Frysinger
- [U-Boot] [PATCH 21/28] net: Remove unneeded static allocation for MAC address in PingSend()
Mike Frysinger
- [U-Boot] [PATCH 22/28] net: Fix net buffer initialization
Mike Frysinger
- [U-Boot] [PATCH 22/28] net: Fix net buffer initialization
Joe Hershberger
- [U-Boot] [PATCH 25/28] net: Add option CONFIG_BOOTP_CAN_FAIL
Mike Frysinger
- [U-Boot] [PATCH 26/28] net: Add link-local addressing support
Mike Frysinger
- [U-Boot] [PATCH 26/28] net: Add link-local addressing support
Joe Hershberger
- [U-Boot] [PATCH 26/28] net: Add link-local addressing support
Mike Frysinger
- [U-Boot] [PATCH 27/28] net: Work-around for brain-damaged Cisco routers with arp-proxy
Mike Frysinger
- [U-Boot] [PATCH 28/28] net: Allow filtering on debug traces in the net subsystem
Mike Frysinger
- [U-Boot] [PATCH 3/3] davinci: add clocks command
Manjunath Hadli
- [U-Boot] [PATCH 3/3] davinci: add clocks command
Tom Rini
- [U-Boot] [PATCH 3/3] davinci: add clocks command
Hadli, Manjunath
- [U-Boot] [PATCH 3/3] imx31: tt01: fix hush parser config, add release config
Helmut Raiger
- [U-Boot] [PATCH 3/3] imx31: tt01: fix hush parser config, add release config
Stefano Babic
- [U-Boot] [PATCH 3/3] mtd/NAND: Remove obsolete SPEAr specific NAND drivers
Amit Virdi
- [U-Boot] [PATCH 3/3] mx28evk: add SPI support
Stefano Babic
- [U-Boot] [PATCH 3/3] MX5/MX6: add missing get_ticks() and get_tbclk()
Stefano Babic
- [U-Boot] [PATCH 3/3] sandbox: add getopt support
Mike Frysinger
- [U-Boot] [PATCH 3/3] sandbox: add getopt support
Simon Glass
- [U-Boot] [PATCH 3/3] sandbox: add getopt support
Mike Frysinger
- [U-Boot] [PATCH 3/3] sandbox: add getopt support
Simon Glass
- [U-Boot] [PATCH 3/3] sandbox: add getopt support
Mike Frysinger
- [U-Boot] [PATCH 3/3] sandbox: add getopt support
Simon Glass
- [U-Boot] [PATCH 3/3] tt01: fix hush parser config, add release config
Stefano Babic
- [U-Boot] [PATCH 3/3] usb_ether: fix typo
Peter Meerwald
- [U-Boot] [PATCH 3/3] usb_ether: fix typo
Mike Frysinger
- [U-Boot] [PATCH 3/4 v3] i.MX28: Fix ref_cpu clock setup
robert at delien.nl
- [U-Boot] [PATCH 3/4 v3] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 3/4 v4] Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1 registers
robert at delien.nl
- [U-Boot] [PATCH 3/4 v5] Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1 registers
Robert at domain.unknown
- [U-Boot] [PATCH 3/4] armv7: Use -march=armv7-a and thereby enable Thumb-2
Aneesh V
- [U-Boot] [PATCH 3/4] microblaze: Add faked LL_TEMAC driver configuration
Stephan Linz
- [U-Boot] [PATCH 3/4] powerpc/85xx:Update NOR code base to support debugger
Prabhakar Kushwaha
- [U-Boot] [PATCH 3/4] SMDK5250: Creating a common file to be used by all variants of DDR
Hatim Ali
- [U-Boot] [PATCH 3/4] SSP1 pins configured for MMC1
robert at delien.nl
- [U-Boot] [PATCH 3/4] USB: Make struct devrequest setup_packet local
Mike Frysinger
- [U-Boot] [PATCH 3/4] USB: Make struct devrequest setup_packet local
Marek Vasut
- [U-Boot] [PATCH 3/4] USB:gadget:designware Support high speed
Amit Virdi
- [U-Boot] [PATCH 3/5] flea3: Provide proper range for memtest
Fabio Estevam
- [U-Boot] [PATCH 3/5] msm7x30: Add support for Qualcomm msm7630 soc
Albert ARIBAUD
- [U-Boot] [PATCH 3/5] msm7x30: Add support for Qualcomm msm7630 soc
mohamed.haneef at lntinfotech.com
- [U-Boot] [PATCH 3/5] mx53evk: Fix CONFIG_SYS_MEMTEST_END
Fabio Estevam
- [U-Boot] [PATCH 3/5] mx53evk: Use gpio_direction_input prior to gpio_get_value
Fabio Estevam
- [U-Boot] [PATCH 3/5] mx53evk: Use gpio_direction_input prior to gpio_get_value
Jason Liu
- [U-Boot] [PATCH 3/5] mx53evk: Use gpio_direction_input prior to gpio_get_value
Stefano Babic
- [U-Boot] [PATCH 3/5] SMDK5250: Creating a common file to be used by all variants of DDR
Hatim Ali
- [U-Boot] [PATCH 3/6] arm: Check for -fstack-usage support
Tom Rini
- [U-Boot] [PATCH 3/6] arm: Check for -fstack-usage support
Wolfgang Denk
- [U-Boot] [PATCH 3/6] ARM: highbank: Add boot counter support
Rob Herring
- [U-Boot] [PATCH 3/7] i.MX28: Reformat the DRAM memory configuration data
Marek Vasut
- [U-Boot] [PATCH 3/7] net/designware: Phy address fix
Amit Virdi
- [U-Boot] [PATCH 3/8] microblaze: Enable phylib and mii support
Michal Simek
- [U-Boot] [PATCH 3/9] NET: fec_mxc.c: Add a way to disable auto negotiation
Stefano Babic
- [U-Boot] [PATCH 4/4 v3] i.MX28: Fix ref_cpu clock setup
robert at delien.nl
- [U-Boot] [PATCH 4/4 v3] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH 4/4 v3] i.MX28: Fix ref_cpu clock setup
Fabio Estevam
- [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL
Marek Vasut
- [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL
Marek Vasut
- [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL
Marek Vasut
- [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL
robert at delien.nl
- [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL
Fabio Estevam
- [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL
Fabio Estevam
- [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL
Robert Deliën
- [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL
Robert Deliën
- [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL
Robert Deliën
- [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL
Robert Deliën
- [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL
Robert Deliën
- [U-Boot] [PATCH 4/4 v5] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL
Robert at domain.unknown
- [U-Boot] [PATCH 4/4] Added NAND flash pin configuration
robert at delien.nl
- [U-Boot] [PATCH 4/4] Added NAND flash pin configuration
Marek Vasut
- [U-Boot] [PATCH 4/4] Added NAND flash pin configuration
Matthias Fuchs
- [U-Boot] [PATCH 4/4] Added NAND flash pin configuration
Robert Deliën
- [U-Boot] [PATCH 4/4] Added NAND flash pin configuration
Matthias Fuchs
- [U-Boot] [PATCH 4/4] Added NAND flash pin configuration
Robert Deliën
- [U-Boot] [PATCH 4/4] Added NAND flash pin configuration
Robert Deliën
- [U-Boot] [PATCH 4/4] microblaze: Wire up LL_TEMAC driver initialization
Stephan Linz
- [U-Boot] [PATCH 4/4] OMAP4: enable Thumb build
Aneesh V
- [U-Boot] [PATCH 4/4] powerpc/85xx:Update NAND code base to support debugger
Prabhakar Kushwaha
- [U-Boot] [PATCH 4/4] SMDK5250: DDR3: Add memory initialization code for DDR3.
Hatim Ali
- [U-Boot] [PATCH 4/4] USB: Staticize usb_storage.c
Marek Vasut
- [U-Boot] [PATCH 4/4] USB: Staticize usb_storage.c
Mike Frysinger
- [U-Boot] [PATCH 4/4] USB:gadget:designware Fix memory nonalignment issue
Amit Virdi
- [U-Boot] [PATCH 4/5] Add support for mmc read and writes
mohamed.haneef at lntinfotech.com
- [U-Boot] [PATCH 4/5] Add support for mmc read and writes
Albert ARIBAUD
- [U-Boot] [PATCH 4/5] imx31_litekit: Provide proper range for memtest
Fabio Estevam
- [U-Boot] [PATCH 4/5] mx53smd: Fix CONFIG_SYS_MEMTEST_END
Fabio Estevam
- [U-Boot] [PATCH 4/5] mx53smd: Use gpio_direction_input prior to gpio_get_value
Fabio Estevam
- [U-Boot] [PATCH 4/5] mx53smd: Use gpio_direction_input prior to gpio_get_value
Stefano Babic
- [U-Boot] [PATCH 4/5] SMDK5250: DDR3: Add memory initialization code for DDR3.
Hatim Ali
- [U-Boot] [PATCH 4/6] ARM: highbank: add reset support
Rob Herring
- [U-Boot] [PATCH 4/6] spl.c: Use __noreturn decorator
Tom Rini
- [U-Boot] [PATCH 4/7] i.MX28: Enable additional DRAM address bits
Marek Vasut
- [U-Boot] [PATCH 4/7] net/designware: Consecutive writes must have delay
Amit Virdi
- [U-Boot] [PATCH 4/7] tegra: Add I2C driver
Simon Glass
- [U-Boot] [PATCH 4/8] microblaze: Enable TFTP put command
Michal Simek
- [U-Boot] [PATCH 4/9] MX5: Add definitions for SATA controller
Stefano Babic
- [U-Boot] [PATCH 5/5] efikamx: Fix CONFIG_SYS_MEMTEST_END
Fabio Estevam
- [U-Boot] [PATCH 5/5] efikamx: Fix CONFIG_SYS_MEMTEST_END
Marek Vasut
- [U-Boot] [PATCH 5/5] imx31_phycore: Provide proper range for memtest
Fabio Estevam
- [U-Boot] [PATCH 5/5] msm7x30: Add support for msm7630_surf board
mohamed.haneef at lntinfotech.com
- [U-Boot] [PATCH 5/5] mx51evk: Use gpio_direction_input prior to gpio_get_value
Fabio Estevam
- [U-Boot] [PATCH 5/5] mx51evk: Use gpio_direction_input prior to gpio_get_value
Stefano Babic
- [U-Boot] [PATCH 5/5] SMDK5250: Selecting DDR3 memory by default.
Hatim Ali
- [U-Boot] [PATCH 5/6] ARM: highbank: change env config to use nvram
Rob Herring
- [U-Boot] [PATCH 5/6] README: Add more SPL config options
Tom Rini
- [U-Boot] [PATCH 5/7] net/designware: Try configuring phy on each dw_eth_init
Mike Frysinger
- [U-Boot] [PATCH 5/7] net/designware: Try configuring phy on each dw_eth_init
Amit Virdi
- [U-Boot] [PATCH 5/7] Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8
Marek Vasut
- [U-Boot] [PATCH 5/9] SATA: check for return value from sata functions
Stefano Babic
- [U-Boot] [PATCH 6/6] ARM: highbank: setup env from boot source register
Rob Herring
- [U-Boot] [PATCH 6/6] SPL: Add README.omap3
Tom Rini
- [U-Boot] [PATCH 6/6] SPL: Add README.omap3
Peter Meerwald
- [U-Boot] [PATCH 6/6] SPL: Add README.omap3
Tom Rini
- [U-Boot] [PATCH 6/7] Introducing 8-bit wide register, mx28_register_8
Marek Vasut
- [U-Boot] [PATCH 6/7] net/designware: Program phy registers when auto-negotiation is ON
Amit Virdi
- [U-Boot] [PATCH 6/8] microblaze: Add faked LL_TEMAC driver configuration
Michal Simek
- [U-Boot] [PATCH 6/9] MX53: add function to set SATA clock to internal
Stefano Babic
- [U-Boot] [PATCH 7/7] Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1 registers
Marek Vasut
- [U-Boot] [PATCH 7/7] net/designware: Set ANAR to 0x1e1
Amit Virdi
- [U-Boot] [PATCH 7/9] Remove CONFIG_SYS_EXTBDINFO from snapper9260.h
Stefano Babic
- [U-Boot] [PATCH 7/9] SATA: add driver for MX5 / MX6 SOCs
Stefano Babic
- [U-Boot] [PATCH 8/8] microblaze: ll_temac: export xilinx_ll_temac_eth_init() for evaluation
Michal Simek
- [U-Boot] [PATCH 8/8] microblaze: ll_temac: export xilinx_ll_temac_eth_init() for evaluation
Stephan Linz
- [U-Boot] [PATCH 8/9] m68k: Change memsz to a signed char to avoid warning
Stefano Babic
- [U-Boot] [PATCH 8/9] MX53: Add support to ESG ima3 board
Stefano Babic
- [U-Boot] [PATCH 8/9] MX53: Add support to ESG ima3 board
Dirk Behme
- [U-Boot] [PATCH 8/9] MX53: Add support to ESG ima3 board
Stefano Babic
- [U-Boot] [PATCH 8/9] MX53: Add support to ESG ima3 board
Dirk Behme
- [U-Boot] [PATCH 9/9] MX53: mx53loco: Add SATA support
Stefano Babic
- [U-Boot] [PATCH 9/9] MX53: mx53loco: Add SATA support
Jason Hui
- [U-Boot] [PATCH 9/9] ppc: Change memsz variable to signed char
Stefano Babic
- [U-Boot] [PATCH resend] ARMV7/Vexpress: add missing get_ticks() and get_tbclk()
walimis
- [U-Boot] [PATCH V13 01/12] Add cmd_spl command
Stefano Babic
- [U-Boot] [PATCH V13 01/12] Add cmd_spl command
Tom Rini
- [U-Boot] [PATCH V13 01/12] Add cmd_spl command
Tom Rini
- [U-Boot] [PATCH V13 01/12] Add cmd_spl command
Tom Rini
- [U-Boot] [PATCH V13 01/12] Add cmd_spl command
Heiko Schocher
- [U-Boot] [PATCH V13 01/12] Add cmd_spl command
Wolfgang Denk
- [U-Boot] [PATCH V13 01/12] Add cmd_spl command
Stefano Babic
- [U-Boot] [PATCH V13 01/12] Add cmd_spl command
Thomas Weber
- [U-Boot] [PATCH V13 02/12] devkit8000: add config for spl command
Stefano Babic
- [U-Boot] [PATCH V13 03/12] omap-common: Add NAND SPL linux booting
Stefano Babic
- [U-Boot] [PATCH V13 04/12] devkit8000/spl: init GPMC for dm9000 in SPL
Stefano Babic
- [U-Boot] [PATCH V13 04/12] devkit8000/spl: init GPMC for dm9000 in SPL
Thomas Weber
- [U-Boot] [PATCH V13 04/12] devkit8000/spl: init GPMC for dm9000 in SPL
Stefano Babic
- [U-Boot] [PATCH V13 05/12] omap-common/spl: Add linux boot to SPL
Stefano Babic
- [U-Boot] [PATCH V13 06/12] omap/spl: change output of spl_parse_image_header
Stefano Babic
- [U-Boot] [PATCH V13 07/12] devkit8000: Implement and activate direct OS boot
Stefano Babic
- [U-Boot] [PATCH V13 08/12] Add cache functions to SPL for armv7
Stefano Babic
- [U-Boot] [PATCH V13 09/12] OMAP3: SPL: do not call I2C init if no I2C is set.
Stefano Babic
- [U-Boot] [PATCH V13 10/12] SPL: call cleanup_before_linux() before booting Linux
Stefano Babic
- [U-Boot] [PATCH V13 11/12] OMAP3: twister: add support to boot Linux from SPL
Stefano Babic
- [U-Boot] [PATCH V13 12/12] arm: Add Prep subcommand support to bootm
Tom Rini
- [U-Boot] [PATCH V13 12/12] arm: Add Prep subcommand support to bootm
Tom Rini
- [U-Boot] [PATCH V13 12/12] arm: Add Prep subcommand support to bootm
Stefano Babic
- [U-Boot] [PATCH V13 12/12] arm: Add Prep subcommand support to bootm
Albert ARIBAUD
- [U-Boot] [PATCH V13 12/12] arm: Add Prep subcommand support to bootm
Stefano Babic
- [U-Boot] [PATCH v2 0/2] add support for printing of clock information as part of 'bdinfo' command
Manjunath Hadli
- [U-Boot] [PATCH v2 0/2] da850evm: add board specific functions
Manjunath Hadli
- [U-Boot] [PATCH v2 0/2] usb/mx6q: USB EHCI support for MX6Q boards
Dirk Behme
- [U-Boot] [PATCH v2 0/2] usb/mx6q: USB EHCI support for MX6Q boards
Wolfgang Grandegger
- [U-Boot] [PATCH v2 0/3] Enable access to FAT filesystem in an ISO9660 El-Torito volume
Marek Vasut
- [U-Boot] [PATCH v2 0/4] Add DDR3 memory support for SMDK5250.
Hatim Ali
- [U-Boot] [PATCH v2 0/4] Clean up ehci-omap and extend support for omap3/4 socs
Marek Vasut
- [U-Boot] [PATCH v2 0/4] Clean up ehci-omap and extend support for omap3/4 socs
Marek Vasut
- [U-Boot] [PATCH v2 0/4] Clean up ehci-omap and extend support for omap3/4 socs
Marek Vasut
- [U-Boot] [PATCH v2 0/4] Clean up ehci-omap and extend support for omap3/4 socs
Govindraj
- [U-Boot] [PATCH v2 0/4] Clean up ehci-omap and extend support for omap3/4 socs
Tom Rini
- [U-Boot] [PATCH v2 0/6] SPL-related documentation / checking
Tom Rini
- [U-Boot] [PATCH v2 0/7] Tidy up ARM link scripts
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/7] Tidy up ARM link scripts
Marek Vasut
- [U-Boot] [PATCH v2 0/7] Tidy up ARM link scripts
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/7] Tidy up ARM link scripts
Simon Glass
- [U-Boot] [PATCH v2 0/7] Tidy up ARM link scripts
Marek Vasut
- [U-Boot] [PATCH v2 1/2] cosmetic: command, log: Coding Style cleanup
Heiko Schocher
- [U-Boot] [PATCH v2 1/2] da850evm: add support to read mac address from SPI flash
Mike Frysinger
- [U-Boot] [PATCH v2 1/2] da850evm: add support to read mac address from SPI flash
Manjunath Hadli
- [U-Boot] [PATCH v2 1/2] da850evm: add support to read mac address from SPI flash
Hadli, Manjunath
- [U-Boot] [PATCH v2 1/2] davinci: remove macro CONFIG_DISPLAY_CPUINFO
Manjunath Hadli
- [U-Boot] [PATCH v2 1/2] mx35pdk: Remove duplicate CPU revision and reset cause information
Fabio Estevam
- [U-Boot] [PATCH v2 1/2] mx35pdk: Remove duplicate CPU revision and reset cause information
Stefano Babic
- [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds
Troy Kisky
- [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds
Graeme Russ
- [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds
Troy Kisky
- [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds
Graeme Russ
- [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds
Graeme Russ
- [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds
Graeme Russ
- [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds
Troy Kisky
- [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds
Graeme Russ
- [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds
Troy Kisky
- [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds
Graeme Russ
- [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q
Wolfgang Grandegger
- [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q
Marek Vasut
- [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q
Marek Vasut
- [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q
Fabio Estevam
- [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q
Dirk Behme
- [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q
Marek Vasut
- [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q
Shilpa Budhihal
- [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q
Marek Vasut
- [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q
Marek Vasut
- [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q
Wolfgang Grandegger
- [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q
Marek Vasut
- [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q
Stefano Babic
- [U-Boot] [PATCH v2 1/2] usb: align buffers at cacheline
Puneet Saxena
- [U-Boot] [PATCH v2 1/2] usb: align buffers at cacheline
Marek Vasut
- [U-Boot] [PATCH v2 1/2] usb: align buffers at cacheline
Simon Glass
- [U-Boot] [PATCH v2 1/2] usb: align buffers at cacheline
Marek Vasut
- [U-Boot] [PATCH v2 1/2] usb: align buffers at cacheline
Simon Glass
- [U-Boot] [PATCH v2 1/2] usb: align buffers at cacheline
puneets
- [U-Boot] [PATCH v2 1/2] usb: align buffers at cacheline
Marek Vasut
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Igor Grinberg
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Stefano Babic
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Igor Grinberg
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Govindraj
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Govindraj
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Igor Grinberg
- [U-Boot] [PATCH v2 1/5] arm: adapt asm/linkage.h from Linux
Aneesh V
- [U-Boot] [PATCH v2 1/5] arm: adapt asm/linkage.h from Linux
Aneesh V
- [U-Boot] [PATCH v2 1/6] .gitignore: Add .su files
Tom Rini
- [U-Boot] [PATCH v2 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL
Simon Glass
- [U-Boot] [PATCH v2 18/20] tegra: i2c: Add function to find DVC bus
Simon Glass
- [U-Boot] [PATCH v2 18/20] tegra: i2c: Add function to find DVC bus
Heiko Schocher
- [U-Boot] [PATCH v2 2/2] da850evm: read mac address from I2C EEPROM on AM18x EVM
Manjunath Hadli
- [U-Boot] [PATCH v2 2/2] davinci: add support for printing clock frequency
Manjunath Hadli
- [U-Boot] [PATCH v2 2/2] davinci: add support for printing clock frequency
Laurence Withers
- [U-Boot] [PATCH v2 2/2] davinci: add support for printing clock frequency
Tom Rini
- [U-Boot] [PATCH v2 2/2] mx6qsabrelite: add and enable USB Host 1 support
Stefano Babic
- [U-Boot] [PATCH v2 2/2] mx6qsabrelite: add and enable USB Host 1 support
Wolfgang Grandegger
- [U-Boot] [PATCH v2 2/2] nds32/ag101/watchdog.S: add linkage support
Macpaul Lin
- [U-Boot] [PATCH v2 2/2] RFC: Let linker create phy array
Troy Kisky
- [U-Boot] [PATCH v2 2/2] usb: Add CONFIG to fetch string descriptor
Mike Frysinger
- [U-Boot] [PATCH v2 2/2] usb: Add CONFIG to fetch string descriptor
Puneet Saxena
- [U-Boot] [PATCH V2 2/3] tt01: add video support
Helmut Raiger
- [U-Boot] [PATCH V2 2/3] tt01: add video support
Stefano Babic
- [U-Boot] [PATCH v2 2/5] armv7: add appropriate headers for assembly functions
Aneesh V
- [U-Boot] [PATCH v2 2/6] config.mk: Make cc-option create a file under include/generated
Tom Rini
- [U-Boot] [PATCH v2 2/6] config.mk: Make cc-option create a file under include/generated
Mike Frysinger
- [U-Boot] [PATCH v2 2/6] config.mk: Make cc-option create a file under include/generated
Tom Rini
- [U-Boot] [PATCH v2 2/8] sandbox: config: Enable fdt and snprintf() options
Simon Glass
- [U-Boot] [PATCH v2 2/8] sandbox: config: Enable fdt and snprintf() options
Mike Frysinger
- [U-Boot] [PATCH v2 2/8] sandbox: config: Enable fdt and snprintf() options
Simon Glass
- [U-Boot] [PATCH v2 2/8] sandbox: config: Enable fdt and snprintf() options
Mike Frysinger
- [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build
Aneesh V
- [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build
Mike Frysinger
- [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build
Aneesh V
- [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build
Tom Rini
- [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build
Aneesh V
- [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build
Tom Rini
- [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build
Mike Frysinger
- [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build
Mike Frysinger
- [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build
Aneesh V
- [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build
Aneesh V
- [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build
Aneesh V
- [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number
Albert ARIBAUD
- [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number
Igor Grinberg
- [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number
Albert ARIBAUD
- [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number
Tom Rini
- [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number
Albert ARIBAUD
- [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number
Igor Grinberg
- [U-Boot] [PATCH v2 3/6] config.mk: Check for -fstack-usage support
Mike Frysinger
- [U-Boot] [PATCH v2 3/6] config.mk: Check for -fstack-usage support
Tom Rini
- [U-Boot] [PATCH v2 3/7] tegra: fdt: Add extra I2C bindings for U-Boot
Simon Glass
- [U-Boot] [PATCH v2 3/8] sandbox: gpio: Add basic driver for simulating GPIOs
Simon Glass
- [U-Boot] [PATCH v2 4/5] armv7: Use -march=armv7-a and thereby enable Thumb-2
Aneesh V
- [U-Boot] [PATCH v2 4/6] spl.c: Use __noreturn decorator
Tom Rini
- [U-Boot] [PATCH v2 4/6] spl.c: Use __noreturn decorator
Mike Frysinger
- [U-Boot] [PATCH v2 4/7] tegra: Add I2C driver
Simon Glass
- [U-Boot] [PATCH v2 4/7] tegra: Add I2C driver
Yen Lin
- [U-Boot] [PATCH v2 4/7] tegra: Add I2C driver
Simon Glass
- [U-Boot] [PATCH v2 5/5] OMAP4: enable Thumb build
Aneesh V
- [U-Boot] [PATCH v2 5/6] README: Add more SPL config options
Tom Rini
- [U-Boot] [PATCH v2 5/6] README: Add more SPL config options
Mike Frysinger
- [U-Boot] [PATCH v2 6/6] SPL: Add README.omap3
Tom Rini
- [U-Boot] [PATCH v2 6/7] arm: add a common .lds link script
Albert ARIBAUD
- [U-Boot] [PATCH v2 6/7] arm: add a common .lds link script
Simon Glass
- [U-Boot] [PATCH v2 6/7] arm: add a common .lds link script
Albert ARIBAUD
- [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard
Simon Glass
- [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard
Stephen Warren
- [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard
Simon Glass
- [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard
Stephen Warren
- [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard
Simon Glass
- [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard
Stephen Warren
- [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard
Simon Glass
- [U-Boot] [PATCH v2] arm, arm-kirkwood: disable l2c before linux boot
Wolfgang Denk
- [U-Boot] [PATCH v2] arm, davinci: cam_enc_4xx board updates
Tom Rini
- [U-Boot] [PATCH v2] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load
Tom Warren
- [U-Boot] [PATCH v2] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load
Tom Warren
- [U-Boot] [PATCH v2] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load
Simon Glass
- [U-Boot] [PATCH v2] ARM:OMAP+:MMC: Add parameters to MMC init
Jonathan Solnit
- [U-Boot] [PATCH v2] ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition
Peter Barada
- [U-Boot] [PATCH v2] ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition
Peter Barada
- [U-Boot] [PATCH V2] bugfix: all Marvell specific build fails due to undefined reference to `get_ticks'
Mike Frysinger
- [U-Boot] [PATCH V2] bugfix: all Marvell specific build fails due to undefined reference to `get_ticks'
Prafulla Wadaskar
- [U-Boot] [PATCH V2] bugfix: all Marvell specific build fails due to undefined reference to `get_ticks'
Prafulla Wadaskar
- [U-Boot] [PATCH V2] bugfix: all Marvell specific build fails due to undefined reference to `get_ticks'
Prafulla Wadaskar
- [U-Boot] [PATCH v2] Change kernel address in dataflash to match u-boot's size
Albert ARIBAUD
- [U-Boot] [PATCH v2] Change kernel address in dataflash to match u-boot's size
Albert ARIBAUD
- [U-Boot] [PATCH v2] Change kernel address in dataflash to match u-boot's size
Alexandre Belloni
- [U-Boot] [PATCH v2] Change kernel address in dataflash to match u-boot's size
Albert ARIBAUD
- [U-Boot] [PATCH v2] Change kernel address in dataflash to match u-boot's size
Alexandre Belloni
- [U-Boot] [PATCH v2] davinci: cleanup davinci_sync_env_enetaddr() fucntion
Mike Frysinger
- [U-Boot] [PATCH v2] davinci: cleanup davinci_sync_env_enetaddr() fucntion
Hadli, Manjunath
- [U-Boot] [PATCH v2] davinci: cleanup davinci_sync_env_enetaddr() fucntion
Mike Frysinger
- [U-Boot] [PATCH v2] davinci: cleanup davinci_sync_env_enetaddr() fucntion
Manjunath Hadli
- [U-Boot] [PATCH V2] edminiv2: add hush parser, cmdline editing and long help
Prafulla Wadaskar
- [U-Boot] [PATCH V2] edminiv2: add hush parser, cmdline editing and long help
Albert ARIBAUD
- [U-Boot] [PATCH v2] Ethernut 5: fix build error
Prabhakar Lad
- [U-Boot] [PATCH v2] Ethernut 5: fix build error
Albert ARIBAUD
- [U-Boot] [PATCH v2] EXYNOS: SMDK5250: Support all 4 UARTs
Doug Anderson
- [U-Boot] [PATCH v2] EXYNOS: SMDK5250: Support all 4 UARTs
Chander Kashyap
- [U-Boot] [PATCH v2] fix CFI flash driver for 8-bit bus support
Luka Perkov
- [U-Boot] [PATCH v2] fix CFI flash driver for 8-bit bus support
Wolfgang Denk
- [U-Boot] [PATCH v2] fix CFI flash driver for 8-bit bus support
Luka Perkov
- [U-Boot] [PATCH v2] imximage: Remove overwriting of flash_offset
Dirk Behme
- [U-Boot] [PATCH v2] imximage: Remove overwriting of flash_offset
Stefano Babic
- [U-Boot] [PATCH v2] imximage: Remove overwriting of flash_offset
Dirk Behme
- [U-Boot] [PATCH v2] MAKEALL: display SPL size if present
Scott Wood
- [U-Boot] [PATCH v2] MAKEALL: display SPL size if present
Tom Rini
- [U-Boot] [PATCH V2] MX27: add missing get_tbclk()
Stefano Babic
- [U-Boot] [PATCH V2] mx28: fix SPL code to make USB booting work
Matthias Fuchs
- [U-Boot] [PATCH V2] mx28: fix SPL code to make USB booting work
Marek Vasut
- [U-Boot] [PATCH V2] mx28: fix SPL code to make USB booting work
Matthias Fuchs
- [U-Boot] [PATCH v2] mx31: Setup AIPS registers
Fabio Estevam
- [U-Boot] [PATCH v2] mx31: Setup AIPS registers
Dirk Behme
- [U-Boot] [PATCH v2] mx31: Setup AIPS registers
Fabio Estevam
- [U-Boot] [PATCH v2] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Dirk Behme
- [U-Boot] [PATCH v2] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Simon Glass
- [U-Boot] [PATCH V2] OMAP3: TAM3517: update ehci interface
Stefano Babic
- [U-Boot] [PATCH V2] OMAP3: TAM3517: update ehci interface
Igor Grinberg
- [U-Boot] [PATCH v2] sh: i2c: Add support I2C controller of SH7734
Heiko Schocher
- [U-Boot] [PATCH v2] sh: i2c: Add support I2C controller of SH7734
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2] sh: i2c: Add support I2C controller of SH7734
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2] skat91: add support for SK-AT91SAM9/SIM508 board
Albert ARIBAUD
- [U-Boot] [PATCH v2] SMDK5250: Add ethernet support
Chander Kashyap
- [U-Boot] [PATCH v2] SMDK5250: Add ethernet support
Mike Frysinger
- [U-Boot] [PATCH v2] SMDK5250: Add ethernet support
Simon Glass
- [U-Boot] [PATCH v2] SMDK5250: Add ethernet support
Minkyu Kang
- [U-Boot] [PATCH v3 0/16] tegra: Add fdt definitions and USB driver
Marek Vasut
- [U-Boot] [PATCH v3 0/16] tegra: Add fdt definitions and USB driver
Simon Glass
- [U-Boot] [PATCH v3 0/16] tegra: Add fdt definitions and USB driver
Marek Vasut
- [U-Boot] [PATCH v3 0/28] Create generic board init for ARM, x86, PPC
Simon Glass
- [U-Boot] [PATCH v3 0/5] Add DDR3 memory support for SMDK5250
Hatim Ali
- [U-Boot] [PATCH v3 0/6] Introduce generic relocation feature
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/6] Introduce generic relocation feature
Simon Glass
- [U-Boot] [PATCH v3 0/6] SPL-related documentation / checking
Tom Rini
- [U-Boot] [PATCH v3 0/7] Clean up ehci-omap and extend support for omap3/4 socs
Govindraj.R
- [U-Boot] [PATCH v3 0/7] Clean up ehci-omap and extend support for omap3/4 socs
Tom Rini
- [U-Boot] [PATCH v3 0/9] tegra: Add I2C driver and associated parts
Heiko Schocher
- [U-Boot] [PATCH v3 0/9] tegra: Add I2C driver and associated parts
Heiko Schocher
- [U-Boot] [PATCH v3 0/9] tegra: Add I2C driver and associated parts
Simon Glass
- [U-Boot] [PATCH v3 0/9] tegra: Add I2C driver and associated parts
Tom Warren
- [U-Boot] [PATCH v3 01/28] arm: Change board baud_rate to ulong
Simon Glass
- [U-Boot] [PATCH v3 02/28] x86: Change board baud_rate to ulong
Simon Glass
- [U-Boot] [PATCH v3 03/28] arm: Only display frame buffer info if there is LCD/video support
Simon Glass
- [U-Boot] [PATCH v3 04/28] x86: Remove compiler warning in sc520_timer.c
Simon Glass
- [U-Boot] [PATCH v3 05/28] x86: Remove dead code in eNET
Simon Glass
- [U-Boot] [PATCH v3 06/28] x86: Add initial memory barrier macros
Simon Glass
- [U-Boot] [PATCH v3 07/28] ppc: Add initial memory barrier macros
Simon Glass
- [U-Boot] [PATCH v3 08/28] Introduce generic global_data
Simon Glass
- [U-Boot] [PATCH v3 09/28] Introduce generic u-boot.h file
Simon Glass
- [U-Boot] [PATCH v3 1/2] usb: align buffers at cacheline
Puneet Saxena
- [U-Boot] [PATCH v3 1/2] usb: align buffers at cacheline
Marek Vasut
- [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support
Thomas Weber
- [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support
T Krishnamoorthy, Balaji
- [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support
Thomas Weber
- [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support
Patil, Rachna
- [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support
Thomas Weber
- [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support
Thomas Weber
- [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support
Heiko Schocher
- [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support
Tom Rini
- [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support
Thomas Weber
- [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support
Tom Rini
- [U-Boot] [PATCH v3 1/4] nds32/ag102: add header support of ag102 soc
Macpaul Lin
- [U-Boot] [PATCH v3 1/5] net: fec_mxc: add 1000 Mbps selection
Troy Kisky
- [U-Boot] [PATCH v3 1/5] net: fec_mxc: add 1000 Mbps selection
Troy Kisky
- [U-Boot] [PATCH v3 1/6] .gitignore: Add .su files
Tom Rini
- [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux
Aneesh V
- [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux
Mike Frysinger
- [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux
Tom Rini
- [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux
Mike Frysinger
- [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux
Aneesh V
- [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux
Mike Frysinger
- [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux
Aneesh V
- [U-Boot] [PATCH v3 1/7] ehci-omap: driver for EHCI host on OMAP3
Govindraj.R
- [U-Boot] [PATCH v3 1/9] tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE
Simon Glass
- [U-Boot] [PATCH v3 10/28] Introduce generic link symbol file
Simon Glass
- [U-Boot] [PATCH v3 11/28] arm: Use sections header to obtain link symbols
Simon Glass
- [U-Boot] [PATCH v3 12/28] x86: Change stub example to use asm-generic/sections.h
Simon Glass
- [U-Boot] [PATCH v3 13/28] Introduce a basic initcall implementation
Simon Glass
- [U-Boot] [PATCH v3 14/28] Define CONFIG_SYS_LEGACY_BOARD everywhere
Simon Glass
- [U-Boot] [PATCH v3 15/28] Introduce generic pre-relocation board_f.c
Simon Glass
- [U-Boot] [PATCH v3 16/28] Introduce generic post-relocation board_r.c
Simon Glass
- [U-Boot] [PATCH v3 17/28] Add spl load feature
Simon Glass
- [U-Boot] [PATCH v3 18/28] arm: Enable generic board support
Simon Glass
- [U-Boot] [PATCH v3 19/28] Add CONFIG_SYS_SYM_OFFSETS to support offset symbols
Simon Glass
- [U-Boot] [PATCH v3 2/2] usb: Add CONFIG to fetch string descriptor
Marek Vasut
- [U-Boot] [PATCH v3 2/2] usb: Add CONFIG to fetch string descriptor
Puneet Saxena
- [U-Boot] [PATCH v3 2/4] nds32/ag102: add ag102 soc support
Macpaul Lin
- [U-Boot] [PATCH v3 2/5] net: fec_mxc: add PHYLIB support
Troy Kisky
- [U-Boot] [PATCH v3 2/6] armv7: add appropriate headers for assembly functions
Mike Frysinger
- [U-Boot] [PATCH v3 2/6] armv7: add appropriate headers for assembly functions
Aneesh V
- [U-Boot] [PATCH v3 2/6] config.mk: Make cc-option create a file under include/generated
Tom Rini
- [U-Boot] [PATCH v3 2/7] ehci-omap: Clean up added ehci-omap.c
Govindraj.R
- [U-Boot] [PATCH v3 2/7] ehci-omap: Clean up added ehci-omap.c
Igor Grinberg
- [U-Boot] [PATCH v3 2/9] fdt: Add function to allow aliases to refer to multiple nodes
Simon Glass
- [U-Boot] [PATCH v3 20/28] x86: Use sections header to obtain link symbols
Simon Glass
- [U-Boot] [PATCH v3 21/28] Add x86 fields to generic global_data
Simon Glass
- [U-Boot] [PATCH v3 22/28] x86: Enable generic board support
Simon Glass
- [U-Boot] [PATCH v3 23/28] Add ppc fields to generic global data
Simon Glass
- [U-Boot] [PATCH v3 24/28] Adjust board_f for ppc
Simon Glass
- [U-Boot] [PATCH v3 25/28] Adjust board_r.c for PowerPC
Simon Glass
- [U-Boot] [PATCH v3 26/28] ppc: Enable generic board board
Simon Glass
- [U-Boot] [PATCH v3 27/28] tegra: Mark board init files for ARMv4t
Simon Glass
- [U-Boot] [PATCH v3 28/28] tegra: Enable generic board for Seaboard.
Simon Glass
- [U-Boot] [PATCH v3 3/4] board/adp-ag102: add board specific files
Macpaul Lin
- [U-Boot] [PATCH v3 3/5] net: phy: add support for Micrel's KSZ9021
Troy Kisky
- [U-Boot] [PATCH v3 3/6] ARM: enable Thumb build
Aneesh V
- [U-Boot] [PATCH v3 3/6] config.mk: Check for -fstack-usage support
Tom Rini
- [U-Boot] [PATCH v3 3/7] OMAP3+: Clock: Adding ehci clock enabling
Igor Grinberg
- [U-Boot] [PATCH v3 3/7] OMAP3+: Clock: Adding ehci clock enabling
Govindraj
- [U-Boot] [PATCH v3 3/7] OMAP3+: Clock: Adding ehci clock enabling
Igor Grinberg
- [U-Boot] [PATCH v3 3/7] OMAP3+: Clock: Adding ehci clock enabling
Govindraj.R
- [U-Boot] [PATCH v3 3/9] tegra: Enhance clock support to handle 16-bit clock divisors
Simon Glass
- [U-Boot] [PATCH v3 3/9] tegra: Enhance clock support to handle 16-bit clock divisors
Tom Warren
- [U-Boot] [PATCH v3 4/4] board/adp-ag102: add configuration of adp-ag102
Macpaul Lin
- [U-Boot] [PATCH v3 4/5] net: phy: make board_phy_config responsible for calling drv->config
Troy Kisky
- [U-Boot] [PATCH v3 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2
Aneesh V
- [U-Boot] [PATCH v3 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2
Mike Frysinger
- [U-Boot] [PATCH v3 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2
Aneesh V
- [U-Boot] [PATCH v3 4/6] spl.c: Use __noreturn decorator
Tom Rini
- [U-Boot] [PATCH v3 4/7] OMAP4: clock-common: Move the usb dppl configuration to new func
Govindraj.R
- [U-Boot] [PATCH v3 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot
Simon Glass
- [U-Boot] [PATCH v3 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot
Heiko Schocher
- [U-Boot] [PATCH v3 5/5] i.mx6q: mx6qsabrelite: Update the network configuration
Troy Kisky
- [U-Boot] [PATCH v3 5/5] i.mx6q: mx6qsabrelite: Update the network configuration
Jason Hui
- [U-Boot] [PATCH v3 5/5] i.mx6q: mx6qsabrelite: Update the network configuration
Troy Kisky
- [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__))
Aneesh V
- [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__))
Tom Rini
- [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__))
Aneesh V
- [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__))
Mike Frysinger
- [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__))
Mike Frysinger
- [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__))
Aneesh V
- [U-Boot] [PATCH v3 5/6] README: document more SPL config options
Tom Rini
- [U-Boot] [PATCH v3 5/7] OMAP3+: ehci-omap: enable usb host ports for beagle/panda
Govindraj.R
- [U-Boot] [PATCH v3 5/7] OMAP3+: ehci-omap: enable usb host ports for beagle/panda
Igor Grinberg
- [U-Boot] [PATCH v3 5/8] sandbox: Add concept of sandbox state
Simon Glass
- [U-Boot] [PATCH v3 5/9] tegra: i2c: Add I2C driver
Simon Glass
- [U-Boot] [PATCH v3 5/9] tegra: i2c: Add I2C driver
Yen Lin
- [U-Boot] [PATCH v3 5/9] tegra: i2c: Add I2C driver
Heiko Schocher
- [U-Boot] [PATCH v3 6/6] OMAP4: enable Thumb build
Aneesh V
- [U-Boot] [PATCH v3 6/6] SPL: Add README.omap3
Tom Rini
- [U-Boot] [PATCH v3 6/6] SPL: Add README.omap3
Mike Frysinger
- [U-Boot] [PATCH v3 6/6] SPL: Add README.omap3
Tom Rini
- [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script
Simon Glass
- [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script
Albert ARIBAUD
- [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script
Albert ARIBAUD
- [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script
Simon Glass
- [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script
Albert ARIBAUD
- [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script
Simon Glass
- [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script
Marek Vasut
- [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script
Simon Glass
- [U-Boot] [PATCH v3 6/7] usb: ulpi: Extend the existing ulpi framework.
Govindraj.R
- [U-Boot] [PATCH v3 6/7] usb: ulpi: Extend the existing ulpi framework.
Igor Grinberg
- [U-Boot] [PATCH v3 6/7] usb: ulpi: Extend the existing ulpi framework.
Govindraj
- [U-Boot] [PATCH v3 6/7] usb: ulpi: Extend the existing ulpi framework.
Igor Grinberg
- [U-Boot] [PATCH v3 6/7] usb: ulpi: Extend the existing ulpi framework.
SUBHASHINI MANNE
- [U-Boot] [PATCH v3 6/7] usb: ulpi: Extend the existing ulpi framework.
Govindraj
- [U-Boot] [PATCH v3 6/9] tegra: i2c: Initialise I2C on Nvidia boards
Heiko Schocher
- [U-Boot] [PATCH v3 6/9] tegra: i2c: Initialise I2C on Nvidia boards
Simon Glass
- [U-Boot] [PATCH v3 7/7] arm: Use common .lds file where possible
Simon Glass
- [U-Boot] [PATCH v3 7/7] usb: ulpi: Add omap-ulpi-view port support
Igor Grinberg
- [U-Boot] [PATCH v3 7/7] usb: ulpi: Add omap-ulpi-view port support
Govindraj.R
- [U-Boot] [PATCH v3 7/8] sandbox: Add flags for open() call
Simon Glass
- [U-Boot] [PATCH v3 7/8] sandbox: Add flags for open() call
Mike Frysinger
- [U-Boot] [PATCH v3 7/9] tegra: i2c: Select I2C ordering for Seaboard
Heiko Schocher
- [U-Boot] [PATCH v3 7/9] tegra: i2c: Select I2C ordering for Seaboard
Simon Glass
- [U-Boot] [PATCH v3 8/9] tegra: i2c: Select number of controllers for Tegra2 boards
Simon Glass
- [U-Boot] [PATCH v3 8/9] tegra: i2c: Select number of controllers for Tegra2 boards
Heiko Schocher
- [U-Boot] [PATCH v3 9/9] tegra: i2c: Enable I2C on Seaboard
Simon Glass
- [U-Boot] [PATCH v3 9/9] tegra: i2c: Enable I2C on Seaboard
Heiko Schocher
- [U-Boot] [PATCH v3] arm, arm-kirkwood: disable l2c before linux boot
Prafulla Wadaskar
- [U-Boot] [PATCH v3] arm, arm-kirkwood: disable l2c before linux boot
Michael Walle
- [U-Boot] [PATCH V3] ARM: fix s3c2410 timer code
Albert ARIBAUD
- [U-Boot] [PATCH V3] ARM: fix s3c2410 timer code
Minkyu Kang
- [U-Boot] [PATCH v3] ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition
Peter Barada
- [U-Boot] [PATCH v3] AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Ulf Samuelsson
- [U-Boot] [PATCH v3] AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Alexandre Belloni
- [U-Boot] [PATCH v3] AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Ulf Samuelsson
- [U-Boot] [PATCH v3] AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Alexandre Belloni
- [U-Boot] [PATCH v3] AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Alexandre Belloni
- [U-Boot] [PATCH v3] AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Ulf Samuelsson
- [U-Boot] [PATCH v3] AVR32: fix timer_init() function
Wolfgang Denk
- [U-Boot] [PATCH v3] AVR32: fix timer_init() function
Sven Schnelle
- [U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high
Simon Glass
- [U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high
Simon Glass
- [U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high
Shawn Guo
- [U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high
Simon Glass
- [U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high
Stefano Babic
- [U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high
Stefano Babic
- [U-Boot] [PATCH v3] davinci: cleanup davinci_sync_env_enetaddr() fucntion
Mike Frysinger
- [U-Boot] [PATCH v3] davinci: cleanup davinci_sync_env_enetaddr() fucntion
Manjunath Hadli
- [U-Boot] [PATCH V3] mx28: fix SPL code to make USB booting work
Matthias Fuchs
- [U-Boot] [PATCH V3] mx28: fix SPL code to make USB booting work
Marek Vasut
- [U-Boot] [PATCH V3] mx28: fix SPL code to make USB booting work
Stefano Babic
- [U-Boot] [PATCH V3] mx28: fix SPL code to make USB booting work
Stefano Babic
- [U-Boot] [PATCH v3] net: allow setting env enetaddr from net device setting
Rob Herring
- [U-Boot] [PATCH v4 0/13] Introduce generic relocation feature
Simon Glass
- [U-Boot] [PATCH v4 0/13] Introduce generic relocation feature
Albert ARIBAUD
- [U-Boot] [PATCH v4 0/13] Introduce generic relocation feature
Simon Glass
- [U-Boot] [PATCH v4 0/13] Introduce generic relocation feature
Graeme Russ
- [U-Boot] [PATCH v4 0/13] Introduce generic relocation feature
Simon Glass
- [U-Boot] [PATCH v4 0/7] Add and Clean up ehci-omap and extend support for omap3/4 socs
Govindraj.R
- [U-Boot] [PATCH v4 01/13] Define CONFIG_SYS_SKIP_RELOC for all archs
Simon Glass
- [U-Boot] [PATCH v4 02/13] Add generic relocation feature
Simon Glass
- [U-Boot] [PATCH v4 02/13] Add generic relocation feature
Albert ARIBAUD
- [U-Boot] [PATCH v4 02/13] Add generic relocation feature
Simon Glass
- [U-Boot] [PATCH v4 03/13] arm: Export and promote relocation symbols
Simon Glass
- [U-Boot] [PATCH v4 04/13] arm: Add start_call_board_init_r() to each start.S
Simon Glass
- [U-Boot] [PATCH v4 04/13] arm: Add start_call_board_init_r() to each start.S
Albert ARIBAUD
- [U-Boot] [PATCH v4 04/13] arm: Add start_call_board_init_r() to each start.S
Simon Glass
- [U-Boot] [PATCH v4 04/13] arm: Add start_call_board_init_r() to each start.S
Simon Glass
- [U-Boot] [PATCH v4 04/20] arm: fdt: Ensure that an embedded fdt is word-aligned
Albert ARIBAUD
- [U-Boot] [PATCH v4 04/20] arm: fdt: Ensure that an embedded fdt is word-aligned
Simon Glass
- [U-Boot] [PATCH v4 04/20] arm: fdt: Ensure that an embedded fdt is word-aligned
Albert ARIBAUD
- [U-Boot] [PATCH v4 04/20] arm: fdt: Ensure that an embedded fdt is word-aligned
Simon Glass
- [U-Boot] [PATCH v4 04/20] arm: fdt: Ensure that an embedded fdt is word-aligned
Albert ARIBAUD
- [U-Boot] [PATCH v4 04/20] arm: fdt: Ensure that an embedded fdt is word-aligned
Simon Glass
- [U-Boot] [PATCH v4 05/13] Move memcpy(), memset() into new lib/membasic.c
Simon Glass
- [U-Boot] [PATCH v4 06/13] arm: Add explicit __image_copy_end symbol for ARM926EJ-S
Simon Glass
- [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata
Simon Glass
- [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata
Simon Glass
- [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata
Christian Riesch
- [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata
Christian Riesch
- [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata
Tom Rini
- [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata
Sughosh Ganu
- [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata
Sughosh Ganu
- [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata
Sughosh Ganu
- [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata
Sughosh Ganu
- [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata
Albert ARIBAUD
- [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata
Scott Wood
- [U-Boot] [PATCH v4 08/13] tx25: Modify to work with generic relocation
Simon Glass
- [U-Boot] [PATCH v4 09/13] hawkboard: Modify to work with generic relocation
Sughosh Ganu
- [U-Boot] [PATCH v4 09/13] hawkboard: Modify to work with generic relocation
Simon Glass
- [U-Boot] [PATCH v4 09/13] hawkboard: Modify to work with generic relocation
Simon Glass
- [U-Boot] [PATCH v4 09/13] hawkboard: Modify to work with generic relocation
Tom Rini
- [U-Boot] [PATCH v4 09/13] hawkboard: Modify to work with generic relocation
Sughosh Ganu
- [U-Boot] [PATCH v4 1/5] net: fec_mxc: add 1000 Mbps selection
Troy Kisky
- [U-Boot] [PATCH v4 1/5] net: fec_mxc: add 1000 Mbps selection
Dirk Behme
- [U-Boot] [PATCH v4 1/5] net: fec_mxc: add 1000 Mbps selection
Stefano Babic
- [U-Boot] [PATCH v4 1/5] net: fec_mxc: add 1000 Mbps selection
Troy Kisky
- [U-Boot] [PATCH v4 1/7] usb: ulpi: Extend the existing ulpi framework.
Govindraj.R
- [U-Boot] [PATCH v4 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL
Simon Glass
- [U-Boot] [PATCH v4 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL
Mike Frysinger
- [U-Boot] [PATCH v4 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL
Marek Vasut
- [U-Boot] [PATCH v4 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL
Simon Glass
- [U-Boot] [PATCH v4 10/13] mx31pdk: Modify to work with generic relocation
Simon Glass
- [U-Boot] [PATCH v4 11/13] smdk6400: Modify to work with generic relocation
Simon Glass
- [U-Boot] [PATCH v4 12/13] arm: Move over to generic relocation
Simon Glass
- [U-Boot] [PATCH v4 12/15] bootstage: Replace show_boot_progress/error() with bootstage_...()
Simon Glass
- [U-Boot] [PATCH v4 13/13] arm: Remove unused code in start.S
Simon Glass
- [U-Boot] [PATCH v4 13/15] bootstage: Implement core microsecond boot time measurement
Simon Glass
- [U-Boot] [PATCH v4 15/15] bootstage: arm: Add bootstage calls in board and bootm
Simon Glass
- [U-Boot] [PATCH v4 2/5] net: fec_mxc: add PHYLIB support
Troy Kisky
- [U-Boot] [PATCH v4 2/7] usb: ulpi: Add omap-ulpi-view port support
Govindraj.R
- [U-Boot] [PATCH v4 2/8] sandbox: config: Enable fdt and snprintf() options
Mike Frysinger
- [U-Boot] [PATCH v4 2/8] sandbox: config: Enable fdt and snprintf() options
Simon Glass
- [U-Boot] [PATCH v4 2/9] Rename run_command() to builtin_run_command()
Mike Frysinger
- [U-Boot] [PATCH v4 2/9] Rename run_command() to builtin_run_command()
Simon Glass
- [U-Boot] [PATCH v4 3/5] net: phy: add support for Micrel's KSZ9021
Troy Kisky
- [U-Boot] [PATCH v4 3/6] config.mk: Check for -fstack-usage support
Tom Rini
- [U-Boot] [PATCH v4 3/7] ehci-omap: driver for EHCI host on OMAP3
Govindraj.R
- [U-Boot] [PATCH v4 3/7] ehci-omap: driver for EHCI host on OMAP3
Stefano Babic
- [U-Boot] [PATCH v4 3/8] sandbox: gpio: Add basic driver for simulating GPIOs
Simon Glass
- [U-Boot] [PATCH v4 3/8] sandbox: gpio: Add basic driver for simulating GPIOs
Mike Frysinger
- [U-Boot] [PATCH v4 3/8] sandbox: gpio: Add basic driver for simulating GPIOs
Simon Glass
- [U-Boot] [PATCH v4 3/8] sandbox: gpio: Add basic driver for simulating GPIOs
Mike Frysinger
- [U-Boot] [PATCH v4 3/8] sandbox: gpio: Add basic driver for simulating GPIOs
Simon Glass
- [U-Boot] [PATCH v4 3/8] sandbox: gpio: Add basic driver for simulating GPIOs
Mike Frysinger
- [U-Boot] [PATCH v4 3/8] sandbox: gpio: Add basic driver for simulating GPIOs
Simon Glass
- [U-Boot] [PATCH v4 4/5] net: phy: make board_phy_config responsible for calling drv->config
Troy Kisky
- [U-Boot] [PATCH v4 4/7] ehci-omap: Clean up added ehci-omap.c
Govindraj.R
- [U-Boot] [PATCH v4 4/7] ehci-omap: Clean up added ehci-omap.c
Govindraj
- [U-Boot] [PATCH v4 4/7] ehci-omap: Clean up added ehci-omap.c
Stefano Babic
- [U-Boot] [PATCH v4 4/8] sandbox: Enable GPIO driver
Simon Glass
- [U-Boot] [PATCH v4 4/9] Stop using builtin_run_command()
Mike Frysinger
- [U-Boot] [PATCH v4 4/9] Stop using builtin_run_command()
Simon Glass
- [U-Boot] [PATCH v4 4/9] Stop using builtin_run_command()
Simon Glass
- [U-Boot] [PATCH v4 4/9] Stop using builtin_run_command()
Simon Glass
- [U-Boot] [PATCH v4 4/9] Stop using builtin_run_command()
Michael Walle
- [U-Boot] [PATCH v4 4/9] Stop using builtin_run_command()
Simon Glass
- [U-Boot] [PATCH v4 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot
Stephen Warren
- [U-Boot] [PATCH v4 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot
Simon Glass
- [U-Boot] [PATCH v4 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot
Stephen Warren
- [U-Boot] [PATCH v4 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot
Simon Glass
- [U-Boot] [PATCH v4 5/5] i.mx6q: mx6qsabrelite: Update the network configuration
Troy Kisky
- [U-Boot] [PATCH v4 5/7] OMAP3+: Clock: Adding ehci clock enabling
Stefano Babic
- [U-Boot] [PATCH v4 5/7] OMAP3+: Clock: Adding ehci clock enabling
Govindraj.R
- [U-Boot] [PATCH v4 5/8] sandbox: Add concept of sandbox state
Simon Glass
- [U-Boot] [PATCH v4 5/9] Don't include standard parser if hush is used
Mike Frysinger
- [U-Boot] [PATCH v4 5/9] Don't include standard parser if hush is used
Simon Glass
- [U-Boot] [PATCH v4 5/9] tegra: i2c: Add I2C driver
Simon Glass
- [U-Boot] [PATCH v4 5/9] tegra: i2c: Add I2C driver
Stephen Warren
- [U-Boot] [PATCH v4 6/6] SPL: Add README.omap3
Tom Rini
- [U-Boot] [PATCH v4 6/7] arm: add a common .lds link script
Simon Glass
- [U-Boot] [PATCH v4 6/7] OMAP4: clock-common: Move the usb dppl configuration to new func
Govindraj.R
- [U-Boot] [PATCH v4 6/7] OMAP4: clock-common: Move the usb dppl configuration to new func
Stefano Babic
- [U-Boot] [PATCH v4 6/8] sandbox: Allow processing instead of or before main loop
Simon Glass
- [U-Boot] [PATCH v4 6/9] Create a single cmd_call() function to handle command execution
Mike Frysinger
- [U-Boot] [PATCH v4 6/9] Create a single cmd_call() function to handle command execution
Simon Glass
- [U-Boot] [PATCH v4 7/7] OMAP4: ehci-omap: enable ehci-omap for panda boards
Govindraj.R
- [U-Boot] [PATCH v4 7/7] OMAP4: ehci-omap: enable ehci-omap for panda boards
Stefano Babic
- [U-Boot] [PATCH v4 7/8] sandbox: Add flags for open() call
Simon Glass
- [U-Boot] [PATCH v4 7/8] sandbox: Add flags for open() call
Mike Frysinger
- [U-Boot] [PATCH v4 7/8] sandbox: Add flags for open() call
Simon Glass
- [U-Boot] [PATCH v4 7/9] Remove interleave of non-U-Boot code in hush
Mike Frysinger
- [U-Boot] [PATCH v4 7/9] tegra: i2c: Select I2C ordering for Seaboard
Stephen Warren
- [U-Boot] [PATCH v4 7/9] tegra: i2c: Select I2C ordering for Seaboard
Simon Glass
- [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing
Simon Glass
- [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing
Mike Frysinger
- [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing
Simon Glass
- [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing
Mike Frysinger
- [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing
Simon Glass
- [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing
Mike Frysinger
- [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing
Simon Glass
- [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing
Mike Frysinger
- [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing
Simon Glass
- [U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script
Albert ARIBAUD
- [U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script
Simon Glass
- [U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script
Albert ARIBAUD
- [U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script
Simon Glass
- [U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script
Albert ARIBAUD
- [U-Boot] [PATCH v4] arm, arm-kirkwood: disable l2c before linux boot
Albert ARIBAUD
- [U-Boot] [PATCH v4] arm, arm-kirkwood: disable l2c before linux boot
Prafulla Wadaskar
- [U-Boot] [PATCH v4] arm, arm-kirkwood: disable l2c before linux boot
Michael Walle
- [U-Boot] [PATCH v4] arm, arm-kirkwood: disable l2c before linux boot
Ian Campbell
- [U-Boot] [PATCH V4] ARM: omap3: Added Teejet mt_ventoux
Stefano Babic
- [U-Boot] [PATCH V4] AT91: pio: Add PIO3 features
Hong Xu
- [U-Boot] [PATCH V4] nand_spl_simple: store ecc data on the stack
Albert ARIBAUD
- [U-Boot] [PATCH V4] nand_spl_simple: store ecc data on the stack
Tom Rini
- [U-Boot] [PATCH v4] tools/env: add posibility to inject configuration
Andreas Bießmann
- [U-Boot] [PATCH v5 0/18] tegra: Add fdt definitions and USB driver
Marek Vasut
- [U-Boot] [PATCH v5 0/18] tegra: Add fdt definitions and USB driver
Simon Glass
- [U-Boot] [PATCH v5 0/18] tegra: Add fdt definitions and USB driver
Simon Glass
- [U-Boot] [PATCH v5 0/18] tegra: Add fdt definitions and USB driver
Marek Vasut
- [U-Boot] [PATCH v5 0/18] tegra: Add fdt definitions and USB driver
Simon Glass
- [U-Boot] [PATCH v5 0/18] tegra: Add fdt definitions and USB driver
Tom Warren
- [U-Boot] [PATCH v5 0/7] Change ARM926EJ-S startup code, hawkboard and calimain
Sughosh Ganu
- [U-Boot] [PATCH v5 0/9] Unified command execution in one place
Simon Glass
- [U-Boot] [PATCH v5 03/14] Add generic relocation feature
Simon Glass
- [U-Boot] [PATCH v5 05/14] arm: Add pivot_to_board_init_r() to each start.S
Simon Glass
- [U-Boot] [PATCH v5 08/18] tegra: fdt: Add additional USB binding
Stephen Warren
- [U-Boot] [PATCH v5 08/18] tegra: fdt: Add additional USB binding
Simon Glass
- [U-Boot] [PATCH v5 1/5] net: fec_mxc: add 1000 Mbps selection
Troy Kisky
- [U-Boot] [PATCH v5 1/7] arm, davinci: Add lowlevel_init for SoCs other than DM644X
Heiko Schocher
- [U-Boot] [PATCH v5 1/9] Remove CMD_PXE's static on run_command()
Simon Glass
- [U-Boot] [PATCH v5 10/18] tegra: usb: fdt: Add additional device tree definitions for USB ports
Stephen Warren
- [U-Boot] [PATCH v5 10/18] tegra: usb: fdt: Add additional device tree definitions for USB ports
Simon Glass
- [U-Boot] [PATCH v5 18/18] tegra: fdt: Enable FDT support for Seaboard
Stephen Warren
- [U-Boot] [PATCH v5 18/18] tegra: fdt: Enable FDT support for Seaboard
Simon Glass
- [U-Boot] [PATCH v5 2/5] net: fec_mxc: add PHYLIB support
Troy Kisky
- [U-Boot] [PATCH v5 2/7] arm, arm926ejs: Do cpu critical inits only for boards that require it
Heiko Schocher
- [U-Boot] [PATCH v5 2/9] Rename run_command() to builtin_run_command()
Simon Glass
- [U-Boot] [PATCH v5 3/5] net: phy: add support for Micrel's KSZ9021
Troy Kisky
- [U-Boot] [PATCH v5 3/7] arm, arm926ejs: Flush the data cache before disabling it
Heiko Schocher
- [U-Boot] [PATCH v5 3/9] Rename run_command2() to run_command()
Simon Glass
- [U-Boot] [PATCH v5 4/5] net: phy: make board_phy_config responsible for calling drv->config
Troy Kisky
- [U-Boot] [PATCH v5 4/7] arm, arm926ejs: Do not clear the V bit on DA850 SoCs
Heiko Schocher
- [U-Boot] [PATCH v5 4/7] arm, arm926ejs: Do not clear the V bit on DA850 SoCs
Heiko Schocher
- [U-Boot] [PATCH v5 4/7] arm, arm926ejs: Do not clear the V bit on DA850 SoCs
Christian Riesch
- [U-Boot] [PATCH v5 4/7] arm, arm926ejs: Do not clear the V bit on DA850 SoCs
Heiko Schocher
- [U-Boot] [PATCH v5 4/9] Stop using builtin_run_command()
Simon Glass
- [U-Boot] [PATCH v5 5/5] i.mx6q: mx6qsabrelite: Update the network configuration
Troy Kisky
- [U-Boot] [PATCH v5 5/5] i.mx6q: mx6qsabrelite: Update the network configuration
Stefano Babic
- [U-Boot] [PATCH v5 5/5] i.mx6q: mx6qsabrelite: Update the network configuration
Troy Kisky
- [U-Boot] [PATCH v5 5/7] arm, arm926ejs: Enable icache only if CONFIG_SYS_ICACHE_OFF is not defined
Heiko Schocher
- [U-Boot] [PATCH v5 5/9] Don't include standard parser if hush is used
Simon Glass
- [U-Boot] [PATCH v5 6/9] Create a single cmd_call() function to handle command execution
Simon Glass
- [U-Boot] [PATCH v5 7/9] Remove interleave of non-U-Boot code in hush
Simon Glass
- [U-Boot] [PATCH v5 7/9] sandbox: Add flags for open() call
Simon Glass
- [U-Boot] [PATCH v5 7/9] sandbox: Add flags for open() call
Mike Frysinger
- [U-Boot] [PATCH v5 8/9] Add cmd_process() to process commands in one place
Simon Glass
- [U-Boot] [PATCH v5 9/9] Convert cmd_usage() calls in common to use a return value
Simon Glass
- [U-Boot] [PATCH V5] ARM: omap3: Added Teejet mt_ventoux
Stefano Babic
- [U-Boot] [PATCH V5] ARM: omap3: Added Teejet mt_ventoux
Igor Grinberg
- [U-Boot] [PATCH v5] sandbox: gpio: Add basic driver for simulating GPIOs
Simon Glass
- [U-Boot] [PATCH v5] sandbox: gpio: Add basic driver for simulating GPIOs
Mike Frysinger
- [U-Boot] [PATCH v5] sandbox: gpio: Add basic driver for simulating GPIOs
Mike Frysinger
- [U-Boot] [PATCH V6 - Part 1 - 1/1] mx6q: define GPIO macros for translating between ordinals and port:index
Stefano Babic
- [U-Boot] [PATCH V6 - Part 2 - 1/3] mxc_spi: move machine specifics into CPU headers
Jason Hui
- [U-Boot] [PATCH V6 - Part 2 - 1/3] mxc_spi: move machine specifics into CPU headers
Stefano Babic
- [U-Boot] [PATCH V6 - Part 2 - 2/2] README: Add description of SPI Flash (SF) command configuration
Jason Hui
- [U-Boot] [PATCH V6 - Part 2 - 2/3] mx6q: Add support for ECSPI through mxc_spi driver
Jason Hui
- [U-Boot] [PATCH V6 - Part 2 - 2/3] mx6q: Add support for ECSPI through mxc_spi driver
Stefano Babic
- [U-Boot] [PATCH V6 - Part 2 - 3/3] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
Jason Hui
- [U-Boot] [PATCH V6 - Part 2 - 3/3] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
Stefano Babic
- [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects
Mike Frysinger
- [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects
Mike Frysinger
- [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects
Mike Frysinger
- [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects
Stefano Babic
- [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects
Dirk Behme
- [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects
Eric Nelson
- [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects
Stefano Babic
- [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects
Eric Nelson
- [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects
Stefano Babic
- [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects
Dirk Behme
- [U-Boot] [PATCH V6 - Part 3 - 1/2] sf command: allow default bus and chip selects
Jason Hui
- [U-Boot] [PATCH V6 - Part 4 - 1/1] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
Jason Hui
- [U-Boot] [PATCH V6 - Part 4 - 1/1] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
Stefano Babic
- [U-Boot] [PATCH V6 - Part 5 - 1/1] mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash
Jason Hui
- [U-Boot] [PATCH V6 - Part 5 - 1/1] mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash
Stefano Babic
- [U-Boot] [PATCH v6 0/20] tegra: Add fdt definitions and USB driver
Stephen Warren
- [U-Boot] [PATCH v6 0/20] tegra: Add fdt definitions and USB driver
Simon Glass
- [U-Boot] [PATCH v6 0/20] tegra: Add fdt definitions and USB driver
Simon Glass
- [U-Boot] [PATCH v6 0/20] tegra: Add fdt definitions and USB driver
Simon Glass
- [U-Boot] [PATCH v6 0/7] Change ARM926EJ-S startup code, hawkboard and calimain
Christian Riesch
- [U-Boot] [PATCH v6 0/7] Change ARM926EJ-S startup code, hawkboard and calimain
Albert ARIBAUD
- [U-Boot] [PATCH v6 01/20] fdt: Tidy up a few fdtdec problems
Simon Glass
- [U-Boot] [PATCH v6 02/20] fdt: Add functions to access phandles, arrays and bools
Simon Glass
- [U-Boot] [PATCH v6 03/20] fdt: Add basic support for decoding GPIO definitions
Simon Glass
- [U-Boot] [PATCH v6 04/20] arm: fdt: Add skeleton device tree file from kernel
Simon Glass
- [U-Boot] [PATCH v6 05/20] tegra: fdt: Add Tegra2x device tree file from kernel
Simon Glass
- [U-Boot] [PATCH v6 06/20] tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel
Simon Glass
- [U-Boot] [PATCH v6 07/20] fdt: Add staging area for device tree binding documentation
Simon Glass
- [U-Boot] [PATCH v6 08/20] fdt: Add tegra-usb bindings file from linux
Simon Glass
- [U-Boot] [PATCH v6 09/20] tegra: fdt: Add additional USB binding
Simon Glass
- [U-Boot] [PATCH v6 09/20] tegra: fdt: Add additional USB binding
Stephen Warren
- [U-Boot] [PATCH v6 1/7] arm, davinci: Add lowlevel_init for SoCs other than DM644X
Christian Riesch
- [U-Boot] [PATCH v6 1/7] arm, davinci: Add lowlevel_init for SoCs other than DM644X
Albert ARIBAUD
- [U-Boot] [PATCH v6 10/18] tegra: usb: fdt: Add additional device tree definitions for USB ports
Marek Vasut
- [U-Boot] [PATCH v6 10/18] tegra: usb: fdt: Add additional device tree definitions for USB ports
Simon Glass
- [U-Boot] [PATCH v6 10/18] tegra: usb: fdt: Add additional device tree definitions for USB ports
Stephen Warren
- [U-Boot] [PATCH v6 10/18] tegra: usb: fdt: Add additional device tree definitions for USB ports
Simon Glass
- [U-Boot] [PATCH v6 10/20] tegra: fdt: Add clock bindings
Simon Glass
- [U-Boot] [PATCH v6 11/18] tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard
Simon Glass
- [U-Boot] [PATCH v6 11/18] tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard
Stephen Warren
- [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard
Stephen Warren
- [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard
Simon Glass
- [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard
Simon Glass
- [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard
Simon Glass
- [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard
Simon Glass
- [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard
Simon Glass
- [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard
Stephen Warren
- [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard
Stephen Warren
- [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard
Stephen Warren
- [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard
Albert ARIBAUD
- [U-Boot] [PATCH v6 12/20] tegra: usb: fdt: Add additional device tree definitions for USB ports
Simon Glass
- [U-Boot] [PATCH v6 13/20] tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard
Simon Glass
- [U-Boot] [PATCH v6 14/20] usb: Add support for txfifo threshold
Simon Glass
- [U-Boot] [PATCH v6 15/20] tegra: fdt: Add function to return peripheral/clock ID
Simon Glass
- [U-Boot] [PATCH v6 15/20] tegra: fdt: Add function to return peripheral/clock ID
Stephen Warren
- [U-Boot] [PATCH v6 15/20] tegra: fdt: Add function to return peripheral/clock ID
Simon Glass
- [U-Boot] [PATCH v6 15/20] tegra: fdt: Add function to return peripheral/clock ID
Stephen Warren
- [U-Boot] [PATCH v6 15/20] tegra: fdt: Add function to return peripheral/clock ID
Simon Glass
- [U-Boot] [PATCH v6 15/20] tegra: fdt: Add function to return peripheral/clock ID
Stephen Warren
- [U-Boot] [PATCH v6 15/20] tegra: fdt: Add function to return peripheral/clock ID
Simon Glass
- [U-Boot] [PATCH v6 15/20] tegra: fdt: Add function to return peripheral/clock ID
Stephen Warren
- [U-Boot] [PATCH v6 16/20] tegra: usb: Add support for Tegra USB peripheral
Simon Glass
- [U-Boot] [PATCH v6 17/20] tegra: usb: Add USB support to nvidia boards
Simon Glass
- [U-Boot] [PATCH v6 18/20] tegra: usb: Add common USB defines for tegra2 boards
Simon Glass
- [U-Boot] [PATCH v6 19/20] tegra: usb: Enable USB on Seaboard
Simon Glass
- [U-Boot] [PATCH v6 2/7] arm, arm926ejs: Do cpu critical inits only for boards that require it
Christian Riesch
- [U-Boot] [PATCH v6 20/20] tegra: fdt: Enable FDT support for Seaboard
Simon Glass
- [U-Boot] [PATCH v6 3/4] EXYNOS: Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v6 3/7] arm, arm926ejs: Flush the data cache before disabling it
Christian Riesch
- [U-Boot] [PATCH v6 4/7] arm, arm926ejs: Add option CONFIG_SYS_EXCEPTION_VECTORS_HIGH
Christian Riesch
- [U-Boot] [PATCH v6 5/7] arm, arm926ejs: Enable icache only if CONFIG_SYS_ICACHE_OFF is not defined
Christian Riesch
- [U-Boot] [PATCH v6 6/7] Changes to move hawkboard to the new spl infrastructure
Christian Riesch
- [U-Boot] [PATCH v6 7/7] arm, davinci: Add support for the Calimain board from OMICRON electronics
Christian Riesch
- [U-Boot] [PATCH v7 0/4] Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v7 09/20] tegra: fdt: Add additional USB binding
Simon Glass
- [U-Boot] [PATCH v7 09/20] tegra: fdt: Add additional USB binding
Stephen Warren
- [U-Boot] [PATCH v7 09/20] tegra: fdt: Add additional USB binding
Simon Glass
- [U-Boot] [PATCH v7 09/20] tegra: fdt: Add additional USB binding
Stephen Warren
- [U-Boot] [PATCH v7 1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro
Chander Kashyap
- [U-Boot] [PATCH v7 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard
Simon Glass
- [U-Boot] [PATCH v7 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard
Simon Glass
- [U-Boot] [PATCH v7 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard
Stephen Warren
- [U-Boot] [PATCH v7 15/20] tegra: fdt: Add function to return peripheral/clock ID
Simon Glass
- [U-Boot] [PATCH v7 15/20] tegra: fdt: Add function to return peripheral/clock ID
Stephen Warren
- [U-Boot] [PATCH v7 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs
Chander Kashyap
- [U-Boot] [PATCH v7 3/4] EXYNOS: Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v7 4/4] EXYNOS: SMDK5250: Add MMC SPL support
Chander Kashyap
- [U-Boot] [PATCH v7 4/4] EXYNOS: SMDK5250: Add MMC SPL support
Mike Frysinger
- [U-Boot] [PATCH v7 4/4] EXYNOS: SMDK5250: Add MMC SPL support
Chander Kashyap
- [U-Boot] [PATCH v7 4/4] EXYNOS: SMDK5250: Add MMC SPL support
Doug Anderson
- [U-Boot] [PATCH v7 4/4] EXYNOS: SMDK5250: Add MMC SPL support
Mike Frysinger
- [U-Boot] [PATCH V7] mcx: support for HTKW mcx board
Stefano Babic
- [U-Boot] [PATCH V7] mcx: support for HTKW mcx board
Igor Grinberg
- [U-Boot] [PATCH v8 0/4] Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v8 1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro
Chander Kashyap
- [U-Boot] [PATCH v8 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs
Chander Kashyap
- [U-Boot] [PATCH v8 3/4] EXYNOS: Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v8 4/4] EXYNOS: SMDK5250: Add MMC SPL support
Chander Kashyap
- [U-Boot] [PATCH v8 4/4] EXYNOS: SMDK5250: Add MMC SPL support
Mike Frysinger
- [U-Boot] [PATCH v8 4/4] EXYNOS: SMDK5250: Add MMC SPL support
Chander Kashyap
- [U-Boot] [PATCH V8] mcx: support for HTKW mcx board
Stefano Babic
- [U-Boot] [PATCH V8] mcx: support for HTKW mcx board
Igor Grinberg
- [U-Boot] [PATCH v9 0/4] Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v9 0/4] Add SMDK5250 board support
Minkyu Kang
- [U-Boot] [PATCH v9 1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro
Chander Kashyap
- [U-Boot] [PATCH v9 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs
Chander Kashyap
- [U-Boot] [PATCH v9 3/4] EXYNOS: Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v9 4/4] EXYNOS: SMDK5250: Add MMC SPL support
Chander Kashyap
- [U-Boot] [PATCH] * Fix: watchdog timed out, if flash blank (0xFF) blocks
Stefan Roese
- [U-Boot] [PATCH] [OMAP3] Pass timings structure pointer to board_get_mem_timings()
Peter Barada
- [U-Boot] [PATCH] [OMAP3] Pass timings structure pointer to board_get_mem_timings()
Igor Grinberg
- [U-Boot] [PATCH] [v2] mtd/nand: Fix IFC driver to support 2K NAND page
Scott Wood
- [U-Boot] [PATCH] add STM29F400BB to table of supported legacy flashs
Stefan Roese
- [U-Boot] [PATCH] add STM29F400BB to table of supported legacy flashs
"David Müller (ELSOFT AG)"
- [U-Boot] [PATCH] am335x_evm: Change MAINTAINERS entry
Tom Rini
- [U-Boot] [PATCH] am33xx: ddr_defs.h: Change DDR timings
Tom Rini
- [U-Boot] [PATCH] AM3517: Changed default clock rate for AM3517
Stefano Babic
- [U-Boot] [PATCH] ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: Add .data/.rodata/.bss section starts to gd_t
Peter Barada
- [U-Boot] [PATCH] ARM: Add .data/.rodata/.bss section starts to gd_t
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: Add .data/.rodata/.bss section starts to gd_t
Peter Barada
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Simon Glass
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Mike Frysinger
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Marek Vasut
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Marek Vasut
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Wolfgang Denk
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Mike Frysinger
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Simon Glass
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Wolfgang Denk
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Graeme Russ
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Simon Glass
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Simon Glass
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Graeme Russ
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Simon Glass
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Graeme Russ
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Wolfgang Denk
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Graeme Russ
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Tom Rini
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Mike Frysinger
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Tom Rini
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Graeme Russ
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Albert ARIBAUD
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Wolfgang Denk
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Dirk Behme
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Dirk Behme
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Aneesh V
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Graeme Russ
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Wolfgang Denk
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Graeme Russ
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Wolfgang Denk
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Graeme Russ
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Dirk Behme
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Dirk Behme
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Simon Glass
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Dirk Behme
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Wolfgang Denk
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Graeme Russ
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Graeme Russ
- [U-Boot] [PATCH] arm: Add option to disable code relocation
Simon Glass
- [U-Boot] [PATCH] ARM: Convert spear3xx and spear6xx boards to boards.cfg
Amit Virdi
- [U-Boot] [PATCH] ARM: Convert spear3xx and spear6xx boards to boards.cfg
Stefan Roese
- [U-Boot] [PATCH] ARM: Convert spear3xx and spear6xx boards to boards.cfg
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: Define change_bit routine
Amit Virdi
- [U-Boot] [PATCH] ARM: Define change_bit routine
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: Define change_bit routine
Amit Virdi
- [U-Boot] [PATCH] ARM: dreamplug: Enable FDT support
Ian Campbell
- [U-Boot] [PATCH] ARM: dreamplug: Enable FDT support
Jason
- [U-Boot] [PATCH] ARM: dreamplug: Enable FDT support
Ian Campbell
- [U-Boot] [PATCH] ARM: dreamplug: Enable FDT support
Prafulla Wadaskar
- [U-Boot] [patch] ARM: Faraday SoC support
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: omap3: temporary disable USB on TAM3517 boards
Marek Vasut
- [U-Boot] [PATCH] ARM: omap3: temporary disable USB on TAM3517 boards
Marek Vasut
- [U-Boot] [PATCH] ARM: omap3: temporary disable USB on TAM3517 boards
Igor Grinberg
- [U-Boot] [PATCH] ARM: omap3: temporary disable USB on TAM3517 boards
Stefano Babic
- [U-Boot] [PATCH] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load
Marek Vasut
- [U-Boot] [PATCH] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load
Marek Vasut
- [U-Boot] [PATCH] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load
Tom Warren
- [U-Boot] [PATCH] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load
Tom Warren
- [U-Boot] [PATCH] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load
Simon Glass
- [U-Boot] [PATCH] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load
Tom Warren
- [U-Boot] [PATCH] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load
Tom Warren
- [U-Boot] [PATCH] arm:fix:cleanup: Volatile keyword removal
Albert ARIBAUD
- [U-Boot] [PATCH] arm:fix:cleanup: Volatile keyword removal
Lukasz Majewski
- [U-Boot] [PATCH] ARM:OMAP+:MMC: Add parameters to MMC init
Jonathan Solnit
- [U-Boot] [PATCH] ARM:OMAP+:MMC: Add parameters to MMC init
Tom Rini
- [U-Boot] [PATCH] ARM:OMAP+:MMC: Add parameters to MMC init
Jonathan Solnit
- [U-Boot] [PATCH] ARM:OMAP+:MMC: Add parameters to MMC init
Jonathan Solnit
- [U-Boot] [PATCH] ARM:OMAP+:MMC: Add parameters to MMC init
Tom Rini
- [U-Boot] [PATCH] ARM:OMAP+:MMC: Add parameters to MMC init
Jonathan Solnit
- [U-Boot] [PATCH] ARM:OMAP+:MMC: Add parameters to MMC init
Jonathan Solnit
- [U-Boot] [PATCH] Armada100: gplugD: Add FAT & EXT2 command support
Ajay Bhargav
- [U-Boot] [PATCH] ARMV7/Vexpress: add missing get_ticks() and get_tbclk()
Liming Wang
- [U-Boot] [PATCH] ARMV7/Vexpress: add missing get_ticks() and get_tbclk()
walimis
- [U-Boot] [PATCH] ARMV7/Vexpress: add missing get_ticks() and get_tbclk()
Marek Vasut
- [U-Boot] [PATCH] ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition.
Peter Barada
- [U-Boot] [PATCH] ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition.
Peter Barada
- [U-Boot] [PATCH] ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition.
Tom Rini
- [U-Boot] [PATCH] armv7: omap3: leave outer cache enabled
Aneesh V
- [U-Boot] [PATCH] ARMv7: OMAP: Add init function for TWL4030 GBPR1 register
Jonathan Solnit
- [U-Boot] [PATCH] AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Alexandre Belloni
- [U-Boot] [PATCH] AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Albert ARIBAUD
- [U-Boot] [PATCH] Avoid using GNU basename
Keith Mok
- [U-Boot] [PATCH] Avoid using GNU basename
Mike Frysinger
- [U-Boot] [PATCH] AVR32 removal due to lack of custodian.
Wolfgang Denk
- [U-Boot] [PATCH] AVR32 removal due to lack of custodian.
Jerry Van Baren
- [U-Boot] [PATCH] AVR32 removal due to lack of custodian.
Paul Gortmaker
- [U-Boot] [PATCH] AVR32 removal due to lack of custodian.
Andreas Bießmann
- [U-Boot] [PATCH] AVR32 removal due to lack of custodian.
Marek Vasut
- [U-Boot] [PATCH] AVR32 removal due to lack of custodian.
Andreas Bießmann
- [U-Boot] [PATCH] AVR32 removal due to lack of custodian.
Marek Vasut
- [U-Boot] [PATCH] beagle: enable DVI_PUP
Peter Meerwald
- [U-Boot] [PATCH] beagle: fix typos
Peter Meerwald
- [U-Boot] [PATCH] Blackfin: bfin_nand: mark local func static
Mike Frysinger
- [U-Boot] [PATCH] Blackfin: gd_t: relocate volatile markings
Mike Frysinger
- [U-Boot] [PATCH] Blackfin: pata_bfin: fix printf warning
Mike Frysinger
- [U-Boot] [PATCH] bugfix: all Marvell specific build fails due to undefined reference to `get_ticks'
Prafulla Wadaskar
- [U-Boot] [PATCH] bugfix: all Marvell specific build fails due to undefined reference to `get_ticks'
Graeme Russ
- [U-Boot] [PATCH] bugfix: all Marvell specific build fails due to undefined reference to `get_ticks'
Prafulla Wadaskar
- [U-Boot] [PATCH] cam_enc_4xx: Rename 'images' to 'imgs'
Tom Rini
- [U-Boot] [PATCH] cam_enc_4xx: Rename 'images' to 'imgs'
Heiko Schocher
- [U-Boot] [PATCH] cfi: fix the incomplete erased status check in buffer write
htbegin
- [U-Boot] [PATCH] cmd_nand.c: Fix 'nand dump' after latest MTD resync
Tom Rini
- [U-Boot] [PATCH] cmd_nand.c: Fix 'nand dump' after latest MTD resync
Scott Wood
- [U-Boot] [PATCH] cmd_nand.c: Fix 'nand dump' after latest MTD resync
Tom Rini
- [U-Boot] [PATCH] command, log: print with "log show" a full logbuffer
Heiko Schocher
- [U-Boot] [PATCH] command, log: print with "log show" a full logbuffer
Detlev Zundel
- [U-Boot] [PATCH] config.mk:Update DBGFLAGS with dwarf information
Prabhakar Kushwaha
- [U-Boot] [PATCH] davinci: cleanup davinci_sync_env_enetaddr() fucntion
Manjunath Hadli
- [U-Boot] [PATCH] davinci: cleanup davinci_sync_env_enetaddr() fucntion
Mike Frysinger
- [U-Boot] [PATCH] dm6467Tevm: Use a common configuration file for davinci_dm6467evm and davinci_dm6467Tevm
Prabhakar Lad
- [U-Boot] [PATCH] doc: fix typos
Peter Meerwald
- [U-Boot] [PATCH] Elimintated magic numbers for scratch register addresses
Robert Deliën
- [U-Boot] [PATCH] Elimintated magic numbers for scratch register addresses
robert at delien.nl
- [U-Boot] [PATCH] Elimintated magic numbers for scratch register addresses
Fabio Estevam
- [U-Boot] [PATCH] Elimintated magic numbers for scratch register addresses
Marek Vasut
- [U-Boot] [PATCH] Elimintated magic numbers for scratch register addresses
Robert Deliën
- [U-Boot] [PATCH] Enable high speed support for USB device framework and usbtty
Marek Vasut
- [U-Boot] [PATCH] Enable high speed support for USB device framework and usbtty
Marek Vasut
- [U-Boot] [PATCH] Enable high speed support for USB device framework and usbtty
Amit Virdi
- [U-Boot] [PATCH] Enable high speed support for USB device framework and usbtty
Amit Virdi
- [U-Boot] [PATCH] env: Add the ability to merge the saved env with the default.
Doug Anderson
- [U-Boot] [PATCH] eth: remove usb-ethernet devices before re-enumerating them
Marek Vasut
- [U-Boot] [PATCH] Ethernut 5: fix build error for board_mmc_getcd()
Thierry Reding
- [U-Boot] [PATCH] Ethernut 5: fix build error for board_mmc_getcd()
Albert ARIBAUD
- [U-Boot] [PATCH] Ethernut 5: fix build error for board_mmc_getcd()
Prabhakar Lad
- [U-Boot] [PATCH] Ethernut 5: fix build error for board_mmc_getcd()
Prabhakar Lad
- [U-Boot] [PATCH] EXYNOS: SMDK5250: Add support for DDR3 memory.
Hatim Ali
- [U-Boot] [PATCH] EXYNOS: SMDK5250: Add support for DDR3 memory.
Chander Kashyap
- [U-Boot] [PATCH] EXYNOS: SMDK5250: Add support for DDR3 memory.
Doug Anderson
- [U-Boot] [PATCH] EXYNOS: SMDK5250: Add support for DDR3 memory.
Hatim Rv
- [U-Boot] [PATCH] EXYNOS: SMDK5250: Add support for DDR3 memory.
Doug Anderson
- [U-Boot] [PATCH] EXYNOS: SMDK5250: Support all 4 UARTs
Doug Anderson
- [U-Boot] [PATCH] EXYNOS: SMDK5250: Support all 4 UARTs
Marek Vasut
- [U-Boot] [PATCH] EXYNOS: SMDK5250: Support all 4 UARTs
Mike Frysinger
- [U-Boot] [PATCH] EXYNOS: SMDK5250: Support all 4 UARTs
Doug Anderson
- [U-Boot] [PATCH] fw_env.c: use default env values if config file cannot be opened
Wolfgang Denk
- [U-Boot] [PATCH] fw_env.h: fix comment
Wolfgang Denk
- [U-Boot] [PATCH] i.MX28: digctrl registers added
robert at delien.nl
- [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup
robert at delien.nl
- [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup
Marek Vasut
- [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup
Robert Deliën
- [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup
Robert Deliën
- [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup
Robert Deliën
- [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup
Stefano Babic
- [U-Boot] [PATCH] i.mx: i.mx5: update imx_get_mac_from_fuse function
Stefano Babic
- [U-Boot] [PATCH] i2c: Add support for designware i2c controller
Amit Virdi
- [U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset
Dirk Behme
- [U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset
Stefano Babic
- [U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset
Dirk Behme
- [U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset
Stefano Babic
- [U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset
Dirk Behme
- [U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset
Stefano Babic
- [U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset
Dirk Behme
- [U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset
stefano babic
- [U-Boot] [PATCH] integrator: rewrite the AP PCI driver
Albert ARIBAUD
- [U-Boot] [PATCH] integrator: rewrite the AP PCI driver
Albert ARIBAUD
- [U-Boot] [PATCH] integrator: rewrite the AP PCI driver
Albert ARIBAUD
- [U-Boot] [PATCH] integrator: rewrite the AP PCI driver
Linus Walleij
- [U-Boot] [PATCH] integrator: stop calling pci_init() twice
Albert ARIBAUD
- [U-Boot] [PATCH] integrator: update the Integrator/CP config
Albert ARIBAUD
- [U-Boot] [PATCH] kirkwood: add support for D-Link DNS-325
Prafulla Wadaskar
- [U-Boot] [PATCH] kirkwood_spi: correct access to irq_mask register
Prafulla Wadaskar
- [U-Boot] [PATCH] kirkwood_spi: correct access to irq_mask register
Ian Campbell
- [U-Boot] [PATCH] lmb: do not export anything without CONFIG_LMB
Mike Frysinger
- [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl
Michael Walle
- [U-Boot] [PATCH] MAKEALL: display SPL size if present
Wolfgang Denk
- [U-Boot] [PATCH] mcx: Enable command line editing
Detlev Zundel
- [U-Boot] [PATCH] microblaze: avoid interrupt race conditions
Stephan Linz
- [U-Boot] [PATCH] microblaze: avoid interrupt race conditions
Michal Simek
- [U-Boot] [PATCH] microblaze: avoid interrupt race conditions
Stephan Linz
- [U-Boot] [PATCH] microblaze: avoid interrupt race conditions
Michal Simek
- [U-Boot] [PATCH] microblaze: Enable phylib and mii support
Stephan Linz
- [U-Boot] [PATCH] microblaze: fix build failure due to undefined reference to `get_ticks'
Stephan Linz
- [U-Boot] [PATCH] microblaze: fix build failure due to undefined reference to `get_ticks'
Michal Šimek
- [U-Boot] [PATCH] microblaze: fix build failure due to undefined reference to `get_ticks'
Stephan Linz
- [U-Boot] [PATCH] microblaze: fix build failure due to undefined reference to `get_ticks'
Stephan Linz
- [U-Boot] [PATCH] microblaze: fix build failure due to undefined reference to `get_ticks'
Stephan Linz
- [U-Boot] [PATCH] microblaze: fix build failure due to undefined reference to `get_ticks'
Michal Simek
- [U-Boot] [PATCH] microblaze: fix build failure due to undefined reference to `get_ticks'
Stephan Linz
- [U-Boot] [PATCH] microblaze: fix build failure due to undefined reference to `get_ticks'
Michal Simek
- [U-Boot] [PATCH] mtd, nand: move some printfs to debug output.
Heiko Schocher
- [U-Boot] [PATCH] mtd/nand:Fix wrong usage of is_blank() in fsl_ifc_run_command
Scott Wood
- [U-Boot] [PATCH] MX27: add missing get_tbclk()
Stefano Babic
- [U-Boot] [PATCH] MX27: add missing get_tbclk()
Marek Vasut
- [U-Boot] [PATCH] MX27: add missing get_tbclk()
Stefano Babic
- [U-Boot] [PATCH] MX28: Fix get_timer() / get_tbclk() issue
Marek Vasut
- [U-Boot] [PATCH] MX28: Fix get_timer() / get_tbclk() issue
Stefano Babic
- [U-Boot] [PATCH] mx28: fix SPL code to make USB booting work
Matthias Fuchs
- [U-Boot] [PATCH] mx28: fix SPL code to make USB booting work
Marek Vasut
- [U-Boot] [PATCH] mx28: fix SPL code to make USB booting work
Matthias Fuchs
- [U-Boot] [PATCH] mx28: fix SPL code to make USB booting work
Marek Vasut
- [U-Boot] [PATCH] mx28: fix SPL code to make USB booting work
Marek Vasut
- [U-Boot] [PATCH] mx31: add "ARM11P power gating" to get_reset_cause
Helmut Raiger
- [U-Boot] [PATCH] mx31: Setup AIPS registers
Fabio Estevam
- [U-Boot] [PATCH] mx31: Setup AIPS registers
Fabio Estevam
- [U-Boot] [PATCH] mx31: Setup AIPS registers
stefano babic
- [U-Boot] [PATCH] mx6q: mx6qsabrelite: setup_spi() should be called in board_init to allow use for environment
Eric Nelson
- [U-Boot] [PATCH] mx6q: mx6qsabrelite: Update the README
Dirk Behme
- [U-Boot] [PATCH] mx6q: mx6qsabrelite: Update the README
Stefano Babic
- [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
Prabhakar Lad
- [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
Dirk Behme
- [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
Prabhakar Lad
- [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
Thierry Reding
- [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
Prabhakar Lad
- [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
Thierry Reding
- [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
Prabhakar Lad
- [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
Thierry Reding
- [U-Boot] [PATCH] nand: reinstate lazy bad block scanning
Scott Wood
- [U-Boot] [PATCH] nand: reinstate lazy bad block scanning
Heiko Schocher
- [U-Boot] [PATCH] nds32/board.c: add PCI prompt at boot up
Macpaul Lin
- [U-Boot] [PATCH] net: calxedaxgmac: fix build due to missing __aligned definition
Rob Herring
- [U-Boot] [PATCH] net: sh_eth: Add support SH7734 Ethernet device
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] net: sh_eth: Collect up EDMR_INIT_CNT to TIMEOUT_CNT
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] net: sh_eth: Fix build warnings and whitespace for sh_eth
Mike Frysinger
- [U-Boot] [PATCH] net: sh_eth: Fix build warnings and whitespace for sh_eth
Mike Frysinger
- [U-Boot] [PATCH] net: sh_eth: Fix build warnings and whitespace for sh_eth
Mike Frysinger
- [U-Boot] [PATCH] net: sh_eth: Fix build warnings and whitespace for sh_eth
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] net: sh_eth: Fix build warnings and whitespace for sh_eth
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] net: sh_eth: Fix build warnings and whitespace for sh_eth
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] net: sh_eth: Remove SH_ETH_PHY_DELAY
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] net: sh_eth: Remove unnecessary return
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] OMAP SPL: Fix missing timer_init() call in OMAP4 s_init()
Tom Rini
- [U-Boot] [PATCH] omap3: fix comment typos
Peter Meerwald
- [U-Boot] [PATCH] OMAP3: Remove unused CONFIG_SYS_NAND_ECCSTEPS/TOTAL
Thomas Weber
- [U-Boot] [PATCH] OMAP3: TAM3517: update ehci interface
Stefano Babic
- [U-Boot] [PATCH] OMAP3: TAM3517: update ehci interface
Igor Grinberg
- [U-Boot] [PATCH] OMAP3: TAM3517: update ehci interface
Stefano Babic
- [U-Boot] [PATCH] OMAP3: TAM3517: update ehci interface
Stefano Babic
- [U-Boot] [PATCH] OMAP3: TAM3517: update ehci interface
Govindraj
- [U-Boot] [PATCH] OMAP3: TAM3517: update ehci interface
Stefano Babic
- [U-Boot] [PATCH] omap3_beagle: Change MAINTAINERS entry
Tom Rini
- [U-Boot] [PATCH] omap3_beagle: Change MAINTAINERS entry
Dirk Behme
- [U-Boot] [PATCH] OMAP4460: Reduce MPU clock speed from 920 to 700
Aneesh V
- [U-Boot] [PATCH] openrisc: implement get_ticks and get_tbclk
Stefan Kristiansson
- [U-Boot] [PATCH] post: new parallel nor flash test
Vaibhav Kothari
- [U-Boot] [PATCH] post: new parallel nor flash test
Mike Frysinger
- [U-Boot] [PATCH] powerpc/85xx:Add PSC9131 RDB Support
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/85xx:Add PSC9131 RDB Support
Wolfgang Denk
- [U-Boot] [PATCH] powerpc/85xx:Add PSC9131 RDB Support
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/85xx:Avoid vector table compilation for nand_spl
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/mpc8xxx: Fix CONFIG_DDR_RAW_TIMING for two boards
York Sun
- [U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when missing USB PHY clock
Marek Vasut
- [U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when missing USB PHY clock
Shengzhou Liu
- [U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when missing USB PHY clock
Liu Shengzhou-B36685
- [U-Boot] [PATCH] PSC9131/PSC9130/PSC9231 Processor Support Added
Prabhakar Kushwaha
- [U-Boot] [PATCH] PXA: Fix missing get_tbclk() breaking vpac boards
Marek Vasut
- [U-Boot] [PATCH] PXA: Fix warning in zipitz2
Marek Vasut
- [U-Boot] [PATCH] PXA: Remove PXA PCMCIA support
Marek Vasut
- [U-Boot] [PATCH] Remove execute permissions from source files
Thomas Weber
- [U-Boot] [PATCH] Remove execute permissions from source files
Mike Frysinger
- [U-Boot] [PATCH] Remove execute permissions from source files
Marek Vasut
- [U-Boot] [PATCH] Remove execute permissions from source files
Stefano Babic
- [U-Boot] [PATCH] Remove execute permissions from source files
Mike Frysinger
- [U-Boot] [PATCH] Remove execute permissions from source files
Marek Vasut
- [U-Boot] [PATCH] Remove execute permissions from source files
Wolfgang Denk
- [U-Boot] [PATCH] Revert "ARM: I2C: I2C Multi byte address support"
Simon Glass
- [U-Boot] [PATCH] Revert "ARM: I2C: I2C Multi byte address support"
Tom Rini
- [U-Boot] [PATCH] Revert "ARM: I2C: I2C Multi byte address support"
Simon Glass
- [U-Boot] [PATCH] Revert "ARM: I2C: I2C Multi byte address support"
Graeme Russ
- [U-Boot] [PATCH] Revert "ARM: I2C: I2C Multi byte address support"
Tom Rini
- [U-Boot] [PATCH] Revert "nand: make 1-bit software ECC configurable"
Scott Wood
- [U-Boot] [PATCH] sandbox: add get_{tbclk,ticks}
Mike Frysinger
- [U-Boot] [PATCH] sandbox: disable fortification
Mike Frysinger
- [U-Boot] [PATCH] sandbox: disable fortification
Simon Glass
- [U-Boot] [PATCH] sandbox: mark os_exit as noreturn
Mike Frysinger
- [U-Boot] [PATCH] sandbox: tweak style in linker script
Mike Frysinger
- [U-Boot] [PATCH] sandbox: tweak style in linker script
Simon Glass
- [U-Boot] [PATCH] sh: Add bit control functions
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] sh: Add bit control functions
Heiko Schocher
- [U-Boot] [PATCH] sh: Add bit control functions
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] sh: Add bit control functions
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] sh: Add support for r0p7734 board
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] sh: Fix sh7264 clock speed and related serial setting
Phil Edworthy
- [U-Boot] [PATCH] sh: Fix sh7264 clock speed and related serial setting
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734
Heiko Schocher
- [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734
Mike Frysinger
- [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734
Marek Vasut
- [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734
Mike Frysinger
- [U-Boot] [PATCH] sh: r0p7734: Add support I2C and set MAC address
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] SMDK5250: Add ethernet support
Chander Kashyap
- [U-Boot] [PATCH] SMDK5250: Add ethernet support
Chander Kashyap
- [U-Boot] [PATCH] SPEAr: Add ARM relocation support
Amit Virdi
- [U-Boot] [PATCH] SPEAr: Add ARM relocation support
Marek Vasut
- [U-Boot] [PATCH] SPEAr: Add ARM relocation support
Amit Virdi
- [U-Boot] [PATCH] SPEAr: Add ARM relocation support
Marek Vasut
- [U-Boot] [PATCH] SPEAr: Add ARM relocation support
Albert ARIBAUD
- [U-Boot] [PATCH] SPEAr: Add ARM relocation support
Amit Virdi
- [U-Boot] [PATCH] SPEAr: Add ARM relocation support
Amit Virdi
- [U-Boot] [PATCH] SPEAr: Add ARM relocation support
Marek Vasut
- [U-Boot] [PATCH] Tegra: mmc: Fixed handling of interrupts in timeouts.
Tom Warren
- [U-Boot] [PATCH] to correct Issue with PowerPc implementation of resetting the watchdog in the decrementer exception handler
Wolfgang Denk
- [U-Boot] [PATCH] to correct Issue with PowerPc implementation of resetting the watchdog in the decrementer exception handler
Eric Olsen
- [U-Boot] [PATCH] tools: checkstack.pl from Linux added to tools
Tom Rini
- [U-Boot] [PATCH] TRATS: set gpio of UART correctly
Minkyu Kang
- [U-Boot] [PATCH] Tricorder: Fix boot after making software ecc configurable
Thomas Weber
- [U-Boot] [PATCH] Tricorder: Fix boot after making software ecc configurable
Tom Rini
- [U-Boot] [PATCH] Tricorder: Fix boot after making software ecc configurable
Scott Wood
- [U-Boot] [PATCH] Tricorder: Fix boot after making software ecc configurable
Scott Wood
- [U-Boot] [PATCH] Tricorder: Store ecc data on stack
Thomas Weber
- [U-Boot] [PATCH] Tricorder: Store ecc data on stack
Tom Rini
- [U-Boot] [PATCH] Tricorder: Switch env to generic mmc driver
Thomas Weber
- [U-Boot] [PATCH] Tricorder: Switch env to generic mmc driver
Tom Rini
- [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed
Bernhard Walle
- [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed
Detlev Zundel
- [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed
Detlev Zundel
- [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed
Bernhard Walle
- [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed
Bernhard Walle
- [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed
Albert ARIBAUD
- [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed
Bernhard Walle
- [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed
Albert ARIBAUD
- [U-Boot] [PATCH] usb: add numeric keypad support to HID driver
Marek Vasut
- [U-Boot] [PATCH] usb: align buffers at cache boundary
Puneet Saxena
- [U-Boot] [PATCH] usb: align buffers at cache boundary
Mike Frysinger
- [U-Boot] [PATCH] USB: fix USB keyboard polling parameter
Marek Vasut
- [U-Boot] [PATCH] USB: move keyboard polling into kbd driver
Marek Vasut
- [U-Boot] [PATCH] usb: musb: fix printf warning
Mike Frysinger
- [U-Boot] [PATCH] usb: musb: fix printf warning
Marek Vasut
- [U-Boot] [PATCH] usb: musb: fix printf warning
Mike Frysinger
- [U-Boot] [PATCH] usb: musb: fix printf warning
Marek Vasut
- [U-Boot] [PATCH] usb: musb: fix printf warning
Mike Frysinger
- [U-Boot] [PATCH] usb: musb: fix printf warning
Marek Vasut
- [U-Boot] [PATCH] USB: reevaluate iomux stdin on USB kbd detect
Marek Vasut
- [U-Boot] [PATCH] USB: reevaluate iomux stdin on USB kbd detect
Allen Martin
- [U-Boot] [PATCH] USB: reevaluate iomux stdin on USB kbd detect
Marek Vasut
- [U-Boot] [PATCH] USB: relax usbcore reset timings
Marek Vasut
- [U-Boot] [PATCH] USB: relax usbcore reset timings
Wolfgang Grandegger
- [U-Boot] [PATCH] USB: relax usbcore reset timings
Marek Vasut
- [U-Boot] [PATCH] USB: Staticize internal functions
Marek Vasut
- [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures
Amit Virdi
- [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures
Mike Frysinger
- [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures
Marek Vasut
- [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures
Mike Frysinger
- [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures
Mike Frysinger
- [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures
Marek Vasut
- [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures
Mike Frysinger
- [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures
Albert ARIBAUD
- [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures
Vipin Kumar
- [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures
Amit Virdi
- [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures
Amit Virdi
- [U-Boot] [PATCH] usbtty: adapt buffers for large packet support
Amit Virdi
- [U-Boot] [PATCH] WIP: fdt: Add serial port controlled by device tree
Mike Frysinger
- [U-Boot] [PATCH] WIP: fdt: Add serial port controlled by device tree
Simon Glass
- [U-Boot] [PATCH][v2]powerpc/8xxx:Add MPH controller support in USB device-tree fixup
Ramneek Mehresh
- [U-Boot] [PATCH][v2]powerpc/8xxx:Add MPH controller support in USB device-tree fixup
Tabi Timur-B04825
- [U-Boot] [PATCH][v3]powerpc/8xxx:Add MPH controller support in USB device-tree fixup
Ramneek Mehresh
- [U-Boot] [PATCH]powerpc/8xxx: Cleanup USB device-tree fixup
Ramneek Mehresh
- [U-Boot] [PATCH]powerpc/8xxx: Cleanup USB device-tree fixup
Marek Vasut
- [U-Boot] [PATCH]powerpc/8xxx:Add MPH controller support in USB device-tree fixup
Marek Vasut
- [U-Boot] [PATCH]powerpc/8xxx:Add MPH controller support in USB device-tree fixup
Marek Vasut
- [U-Boot] [PATCH]powerpc/8xxx:Add MPH controller support in USB device-tree fixup
Mehresh Ramneek-B31383
- [U-Boot] [PATCHv2] OMAP3: Add Corscience Tricorder board
Tom Rini
- [U-Boot] [PATCHv5 1/7] mkenvimage: correct and clarify comments and error messages
David Wagner
- [U-Boot] [PING] Re: [PATCH V3] ARM: fix s3c2410 timer code
"David Müller (ELSOFT AG)"
- [U-Boot] [PING] Re: [PATCH] ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board
Albert ARIBAUD
- [U-Boot] [PING] Re: [PATCH] ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board
Minkyu Kang
- [U-Boot] [PREVIEW] LL TEMAC v10 refactored -- for evaluation only
Michal Simek
- [U-Boot] [PREVIEW] LL TEMAC v10 refactored -- for evaluation only
Stephan Linz
- [U-Boot] [PULL] u-boot-pxa / fix
Marek Vasut
- [U-Boot] [PULL] u-boot-pxa / fix
Albert ARIBAUD
- [U-Boot] [PULL] u-boot-pxa / fix
Marek Vasut
- [U-Boot] [PULL] u-boot-pxa / fix
Albert ARIBAUD
- [U-Boot] [PULL] u-boot-pxa / fix
Marek Vasut
- [U-Boot] [RFC PATCH 0/2] fdt: Deal correctly with alias nodes
Marek Vasut
- [U-Boot] [RFC PATCH 0/2] fdt: Deal correctly with alias nodes
Tom Warren
- [U-Boot] [RFC PATCH 0/2] fdt: Deal correctly with alias nodes
Marek Vasut
- [U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms
Aneesh V
- [U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms
Aneesh V
- [U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms
Aneesh V
- [U-Boot] [RFC PATCH 1/4] ARM: enable Thumb build
Aneesh V
- [U-Boot] [RFC PATCH 1/4] ARM: enable Thumb build
Tom Rini
- [U-Boot] [RFC PATCH 1/4] ARM: enable Thumb build
Aneesh V
- [U-Boot] [RFC PATCH 2/4] OMAP3+: fix issues with Thumb build
Aneesh V
- [U-Boot] [RFC PATCH 2/4] OMAP3+: fix issues with Thumb build
Albert ARIBAUD
- [U-Boot] [RFC PATCH 2/4] OMAP3+: fix issues with Thumb build
Aneesh V
- [U-Boot] [RFC PATCH 2/4] OMAP3+: fix issues with Thumb build
Aneesh V
- [U-Boot] [RFC PATCH 3/4] OMAP3+: Use -march=armv7-a and thereby enable Thumb-2
Aneesh V
- [U-Boot] [RFC PATCH 4/4] OMAP4: enable Thumb build
Aneesh V
- [U-Boot] [RFC PATCH v2 0/28] Create generic board init for ARM, x86, PPC
Simon Glass
- [U-Boot] [RFC PATCH v2 0/28] Create generic board init for ARM, x86, PPC
Graeme Russ
- [U-Boot] [RFC PATCH v2 0/28] Create generic board init for ARM, x86, PPC
Simon Glass
- [U-Boot] [RFC PATCH v2 0/28] Create generic board init for ARM, x86, PPC
Wolfgang Denk
- [U-Boot] [RFC PATCH v2 03/28] arm: Only display frame buffer info if there is LCD/video support
Simon Glass
- [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement
Simon Glass
- [U-Boot] [RFC} [PATCH] Feature removal due to lack of custodians
Wolfgang Denk
- [U-Boot] [RFC} [PATCH] Feature removal due to lack of custodians
Albert ARIBAUD
- [U-Boot] [RFC} [PATCH] Feature removal due to lack of custodians
Marek Vasut
- [U-Boot] [RFC} [PATCH] Feature removal due to lack of custodians
Albert ARIBAUD
- [U-Boot] [RFC} [PATCH] Feature removal due to lack of custodians
Wolfgang Denk
- [U-Boot] [RFC} [PATCH] Feature removal due to lack of custodians
Wolfgang Denk
- [U-Boot] [RFC} [PATCH] Feature removal due to lack of custodians
Simon Glass
- [U-Boot] [RFC} [PATCH] Feature removal due to lack of custodians
Mike Frysinger
- [U-Boot] [Samsung] [PATCH v7 4/4] EXYNOS: SMDK5250: Add MMC SPL support
Chander Kashyap
- [U-Boot] [Samsung] [PATCH v7 4/4] EXYNOS: SMDK5250: Add MMC SPL support
Mike Frysinger
- [U-Boot] [STATUS] [ARM]
Albert ARIBAUD
- [U-Boot] [STATUS] [ARM]
Marek Vasut
- [U-Boot] [STATUS] [ARM]
Dirk Behme
- [U-Boot] [STATUS] [ARM]
Albert ARIBAUD
- [U-Boot] [STATUS] [ARM]
Sughosh Ganu
- [U-Boot] [STATUS] [ARM]
Marek Vasut
- [U-Boot] [STATUS] [ARM]
Tom Rini
- [U-Boot] [STATUS] [ARM]
Albert ARIBAUD
- [U-Boot] [STATUS] [ARM]
Tom Rini
- [U-Boot] [STATUS] [ARM]
Stefano Babic
- [U-Boot] [STATUS] [ARM]
Sughosh Ganu
- [U-Boot] [STATUS] [ARM]
Rob Herring
- [U-Boot] [STATUS] [ARM]
Albert ARIBAUD
- [U-Boot] [STATUS] [ARM]
Rob Herring
- [U-Boot] [U-Boot-Users]-boot monitor function
periyasamy samy
- [U-Boot] [UPDATED] Pull request: u-boot-imx
Stefano Babic
- [U-Boot] [UPDATED] Pull request: u-boot-imx
Albert ARIBAUD
- [U-Boot] [v2 1/4] USB: Armada100: Add UTMI PHY interface driver
Ajay Bhargav
- [U-Boot] [v2 1/4] USB: Armada100: Add UTMI PHY interface driver
Marek Vasut
- [U-Boot] [v2 1/4] USB: Armada100: Add UTMI PHY interface driver
Ajay Bhargav
- [U-Boot] [v2 2/4] USB: Armada100: ECHI Driver for Armada100 SOCs
Ajay Bhargav
- [U-Boot] [v2 2/4] USB: Armada100: ECHI Driver for Armada100 SOCs
Marek Vasut
- [U-Boot] [v2 2/4] USB: Armada100: ECHI Driver for Armada100 SOCs
Ajay Bhargav
- [U-Boot] [v2 3/4] Armada100: gplugD: Add USB command support
Ajay Bhargav
- [U-Boot] [v2 3/4] Armada100: gplugD: Add USB command support
Marek Vasut
- [U-Boot] [v2 4/4] Armada100: gplugD: Add FAT & EXT2 command support
Marek Vasut
- [U-Boot] [v2 4/4] Armada100: gplugD: Add FAT & EXT2 command support
Prafulla Wadaskar
- [U-Boot] [v2 4/4] Armada100: gplugD: Add FAT & EXT2 command support
Ajay Bhargav
- [U-Boot] [v2 4/4] Armada100: gplugD: Add FAT & EXT2 command support
Ajay Bhargav
- [U-Boot] [v3 1/3] USB: Armada100: Add UTMI PHY interface driver
Ajay Bhargav
- [U-Boot] [v3 1/3] USB: Armada100: Add UTMI PHY interface driver
Ajay Bhargav
- [U-Boot] [v3 2/3] USB: Armada100: EHCI Driver for Armada100 SOCs
Ajay Bhargav
- [U-Boot] [v3 3/3] Armada100: gplugD: Add USB command support
Ajay Bhargav
- [U-Boot] Add SPL support
Prabhakar Lad
- [U-Boot] adding a new command to help menu
Érico Porto
- [U-Boot] adding a new command to help menu
Érico Porto
- [U-Boot] ARM ld: .bss overlaps section .rel.dyn
Amit Virdi
- [U-Boot] ARM ld: .bss overlaps section .rel.dyn
Amit Virdi
- [U-Boot] ARM ld: .bss overlaps section .rel.dyn
Amit Virdi
- [U-Boot] ARM ld: .bss overlaps section .rel.dyn
Albert ARIBAUD
- [U-Boot] ARM ld: .bss overlaps section .rel.dyn
viresh kumar
- [U-Boot] ARM ld: .bss overlaps section .rel.dyn
Amit Virdi
- [U-Boot] ARM ld: .bss overlaps section .rel.dyn
Albert ARIBAUD
- [U-Boot] ARM ld: .bss overlaps section .rel.dyn
Amit Virdi
- [U-Boot] ARM926: U-Boot crash while relocating
Amit Virdi
- [U-Boot] ARM926: U-Boot crash while relocating
Albert ARIBAUD
- [U-Boot] ARM926: U-Boot crash while relocating
Amit Virdi
- [U-Boot] ARM: Update mach-types
Troy Kisky
- [U-Boot] ARM: Update mach-types
Marek Vasut
- [U-Boot] ARM: Update mach-types
Troy Kisky
- [U-Boot] ARM: Update mach-types
Marek Vasut
- [U-Boot] ARM: Update mach-types
Dirk Behme
- [U-Boot] ARM: Update mach-types
Fabio Estevam
- [U-Boot] ARM: Update mach-types
Eric Nelson
- [U-Boot] ARM: Update mach-types
stefano babic
- [U-Boot] ARM: Update mach-types
Troy Kisky
- [U-Boot] Atmel spi flash
Ran Shalit
- [U-Boot] Avoiding reload on ARM U-BOOT
yehuda80
- [U-Boot] Avoiding reload on ARM U-BOOT
Marek Vasut
- [U-Boot] Avoiding reload on ARM U-BOOT
Marek Vasut
- [U-Boot] Avoiding reload on ARM U-BOOT
yehuda yitchak
- [U-Boot] Avoiding reload on ARM U-BOOT
Marek Vasut
- [U-Boot] Avoiding reload on ARM U-BOOT
Stefano Babic
- [U-Boot] BDM4GDB
Andrew Hakman
- [U-Boot] BDM4GDB
Wolfgang Denk
- [U-Boot] Broken ecc.size when switching between sw and hw ecc (beagleboard)
Orjan Friberg
- [U-Boot] Broken ecc.size when switching between sw and hw ecc (beagleboard)
Scott Wood
- [U-Boot] Build u-Boot for NAND boot on i.MX53x platform
Bud Miljkovic
- [U-Boot] Build u-Boot for NAND boot on i.MX53x platform
Charles Manning
- [U-Boot] Build u-Boot for NAND boot on i.MX53x platform
Scott Wood
- [U-Boot] Build u-Boot for NAND boot on i.MX53x platform
Stefano Babic
- [U-Boot] Build u-Boot for NAND boot on i.MX53x platform
Fabio Estevam
- [U-Boot] Build u-Boot for NAND boot on i.MX53x platform
Stefano Babic
- [U-Boot] Can u-Boot Ran from RAM?
Charles Manning
- [U-Boot] Can u-Boot Ran from RAM?
Marek Vasut
- [U-Boot] Can u-Boot Ran from RAM?
Marek Vasut
- [U-Boot] Can u-Boot Ran from RAM?
Wolfgang Denk
- [U-Boot] Can u-Boot Ran from RAM?
Wolfgang Denk
- [U-Boot] Can u-Boot Ran from RAM?
Marek Vasut
- [U-Boot] Can u-Boot Ran from RAM?
Bud Miljkovic
- [U-Boot] compile the u-boot
Albert ARIBAUD
- [U-Boot] Configuration settings for Freescale i.MX53x demo boards
Charles Manning
- [U-Boot] Configuration settings for Freescale i.MX53x demo boards
Scott Wood
- [U-Boot] Configuration settings for Freescale i.MX53x demo boards
Bud Miljkovic
- [U-Boot] Craneboard with Uboot and xloader
Mohamed HAMZAOUI
- [U-Boot] Craneboard with Uboot and xloader
Tom Rini
- [U-Boot] Craneboard with Uboot and xloader
Mohamed HAMZAOUI
- [U-Boot] Craneboard with Uboot and xloader
Tom Rini
- [U-Boot] Craneboard with Uboot and xloader
Mohamed HAMZAOUI
- [U-Boot] Craneboard with Uboot and xloader
Tom Rini
- [U-Boot] Craneboard with Uboot and xloader
Mohamed HAMZAOUI
- [U-Boot] Craneboard with Uboot and xloader
Tom Rini
- [U-Boot] Craneboard with Uboot and xloader
Mohamed HAMZAOUI
- [U-Boot] Craneboard with Uboot and xloader
Mohamed HAMZAOUI
- [U-Boot] Deprecation (planned removal) of 'maintainer-less' code
Graeme Russ
- [U-Boot] Deprecation (planned removal) of 'maintainer-less' code
Marek Vasut
- [U-Boot] Deprecation (planned removal) of 'maintainer-less' code
Graeme Russ
- [U-Boot] Deprecation (planned removal) of 'maintainer-less' code
Marek Vasut
- [U-Boot] do mx28evk/m28evk start with battery?
lau
- [U-Boot] do mx28evk/m28evk start with battery?
Marek Vasut
- [U-Boot] do mx28evk/m28evk start with battery?
lau
- [U-Boot] do mx28evk/m28evk start with battery?
Marek Vasut
- [U-Boot] Does U-boot support ASLR?
Jason Markley (ggsg)
- [U-Boot] Does U-boot support ASLR?
Wolfgang Denk
- [U-Boot] Does U-boot support ASLR?
Mike Frysinger
- [U-Boot] Does U-boot support ASLR?
Mike Frysinger
- [U-Boot] Does U-boot support ASLR?
Scott Wood
- [U-Boot] Does U-boot support ASLR?
Mike Frysinger
- [U-Boot] Does U-boot support ASLR?
Jason Markley
- [U-Boot] Does U-boot support ASLR?
Jason Markley (ggsg)
- [U-Boot] Does U-boot support ASLR?
Jason Markley (ggsg)
- [U-Boot] Does U-boot support ASLR?
Scott Wood
- [U-Boot] Does U-boot support ASLR?
Mike Frysinger
- [U-Boot] Does U-boot support ASLR?
Mike Frysinger
- [U-Boot] Does U-boot support ASLR?
Jason Markley (ggsg)
- [U-Boot] Does U-boot support ASLR?
Graeme Russ
- [U-Boot] Does U-boot support ASLR?
Jason Markley (ggsg)
- [U-Boot] Does U-boot support ASLR?
Graeme Russ
- [U-Boot] Does U-boot support ASLR?
Wolfgang Denk
- [U-Boot] Does U-boot support ASLR?
Wolfgang Denk
- [U-Boot] Does U-boot support ASLR?
Jason Markley (ggsg)
- [U-Boot] Does U-boot support ASLR?
Wolfgang Denk
- [U-Boot] Enabling Cache in SPL - how to speed up booting from SPL
Marek Vasut
- [U-Boot] Enabling Cache in SPL - how to speed up booting from SPL
Stefano Babic
- [U-Boot] Enabling Cache in SPL - how to speed up booting from SPL
Stefano Babic
- [U-Boot] error compiling U-boot tools
Kopac Drago
- [U-Boot] error compiling U-boot tools
Mike Frysinger
- [U-Boot] exports.h and the GPL
Michael Walle
- [U-Boot] exports.h and the GPL
Mike Frysinger
- [U-Boot] exports.h and the GPL
Michael Walle
- [U-Boot] exports.h and the GPL
Mike Frysinger
- [U-Boot] exports.h and the GPL
Wolfgang Denk
- [U-Boot] Facing the problem with yaffs2 from uboot
VISWANADHULA BALAJI
- [U-Boot] Facing the problem with yaffs2 from uboot
Graeme Russ
- [U-Boot] Fastboot gadget, v2
Marek Vasut
- [U-Boot] Fastboot gadget, v2
Sebastian Andrzej Siewior
- [U-Boot] Fastboot gadget, v2
Marek Vasut
- [U-Boot] Flash not erased problem.
Sanjoy Saha - ERS, HCL Tech
- [U-Boot] Flash not erased problem.
Stefan Roese
- [U-Boot] flash post test
Albert ARIBAUD
- [U-Boot] flash post test
vaibhav kothari
- [U-Boot] flash post test
Albert ARIBAUD
- [U-Boot] flash post test
Scott Wood
- [U-Boot] flash post test
Albert ARIBAUD
- [U-Boot] flash post test
Scott Wood
- [U-Boot] flash post test
vaibhav kothari
- [U-Boot] Formatting bootable SD, freescale platform
Joe Kulikauskas
- [U-Boot] Formatting bootable SD, freescale platform
Marek Vasut
- [U-Boot] Formatting bootable SD, freescale platform
McClintock Matthew-B29882
- [U-Boot] fsl_esdhc.c: eMMC 4.4 support?
Dirk Behme
- [U-Boot] fsl_esdhc.c: eMMC 4.4 support?
Andy Fleming
- [U-Boot] fsl_esdhc.c: eMMC 4.4 support?
Dirk Behme
- [U-Boot] fsl_esdhc.c: eMMC 4.4 support?
stefano babic
- [U-Boot] How to Change the DDR3 Speed to low in U-boot
Balaji Sivakumar, ERS, HCLTech
- [U-Boot] how to controll pixel clock
siddharth baisane
- [U-Boot] How to use external fdt file with kernel+initramfs uimage?
Howard, Marc
- [U-Boot] http://patchwork.ozlabs.org/patch/136415/ seems to break HUSH parser?
Albert ARIBAUD
- [U-Boot] http://patchwork.ozlabs.org/patch/136415/ seems to break HUSH parser?
Prafulla Wadaskar
- [U-Boot] http://patchwork.ozlabs.org/patch/136415/ seems to break HUSH parser?
Prafulla Wadaskar
- [U-Boot] http://patchwork.ozlabs.org/patch/136415/ seems to break HUSH parser?
Stefano Babic
- [U-Boot] http://patchwork.ozlabs.org/patch/136415/ seems to break HUSH parser?
Heiko Schocher
- [U-Boot] hush saveenv problem
Alex Zeffertt
- [U-Boot] hush saveenv problem
Simon Glass
- [U-Boot] i.MX5/6 U-Boot: Cache enabling
Aneesh V
- [U-Boot] i.MX5/6 U-Boot: Cache enabling
Dirk Behme
- [U-Boot] i.MX5/6 U-Boot: Cache enabling
Marek Vasut
- [U-Boot] i.MX5/6 U-Boot: Cache enabling (was: Re: Skipping relocation RAM to RAM, esp. on i.MX6?)
Marek Vasut
- [U-Boot] i.MX5/6 U-Boot: Cache enabling (was: Re: Skipping relocation RAM to RAM, esp. on i.MX6?)
Dirk Behme
- [U-Boot] i.MX6Q USB host support for mainline Linux (was: Re: [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q)
Marek Vasut
- [U-Boot] i.MX6Q USB host support for mainline Linux (was: Re: [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q)
Dirk Behme
- [U-Boot] imximage: Create i.MX6 NOR flash images (was: [PATCH v5 1/1] imximage: Add MX53 boot image support)
Dirk Behme
- [U-Boot] Integity validation (checksum) of a squashfs root file system
Pascal Levesque
- [U-Boot] Integity validation (checksum) of a squashfs root file system
Pascal Levesque
- [U-Boot] Integity validation (checksum) of a squashfs root file system
Marek Vasut
- [U-Boot] Integity validation (checksum) of a squashfs root file system
Pascal Levesque
- [U-Boot] Integity validation (checksum) of a squashfs root file system
Marek Vasut
- [U-Boot] Integity validation (checksum) of a squashfs root file system
Pascal Levesque
- [U-Boot] IPv6 Support in U-BOOT
yehuda yitchak
- [U-Boot] IPv6 Support in U-BOOT
yehuda yitchak
- [U-Boot] Luna Pier u-boot addition
Stojsavljevic, Zoran
- [U-Boot] M29W256GL + WEIM in uboot
Francisco Muñoz
- [U-Boot] M29W256GL + WEIM in uboot
Marek Vasut
- [U-Boot] M29W256GL + WEIM in uboot
Marek Vasut
- [U-Boot] M29W256GL + WEIM in uboot
Fabio Estevam
- [U-Boot] M29W256GL + WEIM in uboot
Francisco Muñoz
- [U-Boot] M29W256GL + WEIM in uboot
Fabio Estevam
- [U-Boot] M29W256GL + WEIM in uboot
Francisco Muñoz
- [U-Boot] M29W256GL + WEIM in uboot
Fabio Estevam
- [U-Boot] Marvell Alaska Phy loopback mode support using RGMII interface
Prafulla Wadaskar
- [U-Boot] Marvell Alaska Phy loopback mode support using RGMII interface
amruth vamadev
- [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc
Mike Frysinger
- [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc
Mike Frysinger
- [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc
Alex Hornung
- [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc
Albert ARIBAUD
- [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc
Graeme Russ
- [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc
Albert ARIBAUD
- [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc
Graeme Russ
- [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc
Albert ARIBAUD
- [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc
Graeme Russ
- [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc
Graeme Russ
- [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc
Graeme Russ
- [U-Boot] Memory testing of flash
vaibhav kothari
- [U-Boot] MPC8313 DDR2 configuration
Scott Larson
- [U-Boot] MPC8313 DDR2 configuration
Paul Gortmaker
- [U-Boot] MPC8313 DDR2 configuration
Scott Larson
- [U-Boot] mx28: booting u-boot via USB
Matthias Fuchs
- [U-Boot] mx28: booting u-boot via USB
Matthias Fuchs
- [U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs
Marek Vasut
- [U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs
Liu Hui-R64343
- [U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs
Marek Vasut
- [U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs
Wolfgang Grandegger
- [U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs
Wolfgang Grandegger
- [U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs
Stefano Babic
- [U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs
Wolfgang Grandegger
- [U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs
Marek Vasut
- [U-Boot] Nand dump and nand bad block disagree
jean-philippe francois
- [U-Boot] Nand dump and nand bad block disagree
Scott Wood
- [U-Boot] Nand dump and nand bad block disagree
jean-philippe francois
- [U-Boot] Nand dump and nand bad block disagree
Mike Frysinger
- [U-Boot] Nand dump and nand bad block disagree
Scott Wood
- [U-Boot] Nand dump and nand bad block disagree
Scott Wood
- [U-Boot] Nand dump and nand bad block disagree
Mike Frysinger
- [U-Boot] Nand dump and nand bad block disagree
Scott Wood
- [U-Boot] Nand dump and nand bad block disagree
Mike Frysinger
- [U-Boot] nand: current mainline show "new" startup output
Heiko Schocher
- [U-Boot] nand: current mainline show "new" startup output
Scott Wood
- [U-Boot] nand: current mainline show "new" startup output
Heiko Schocher
- [U-Boot] nand: current mainline show "new" startup output
Scott Wood
- [U-Boot] net: re-enumerating usb-ethernet devices hangs the system
Marek Vasut
- [U-Boot] OMAP USB, beagle-xm fail
Peter Meerwald
- [U-Boot] OMAP USB, beagle-xm fail
Govindraj
- [U-Boot] OMAP USB, beagle-xm fail
Peter Meerwald
- [U-Boot] OMAP USB, beagle-xm fail
Patil, Rachna
- [U-Boot] OMAP USB, beagle-xm fail
Tom Rini
- [U-Boot] OMAP USB, beagle-xm fail
T Krishnamoorthy, Balaji
- [U-Boot] Password protection of U-Boot command line
Graeme Russ
- [U-Boot] Password protection of U-Boot command line
Wolfgang Denk
- [U-Boot] Password protection of U-Boot command line
Graeme Russ
- [U-Boot] Password protection of U-Boot command line
Marek Vasut
- [U-Boot] Password protection of U-Boot command line
Wolfgang Denk
- [U-Boot] Password protection of U-Boot command line
Wolfgang Denk
- [U-Boot] Password protection of U-Boot command line
Frans Meulenbroeks
- [U-Boot] Password protection of U-Boot command line
Wolfgang Denk
- [U-Boot] Password protection of U-Boot command line
Mike Frysinger
- [U-Boot] Password protection of U-Boot command line
Mike Frysinger
- [U-Boot] Password protection of U-Boot command line
Frans Meulenbroeks
- [U-Boot] Password protection of U-Boot command line
Wolfgang Denk
- [U-Boot] Password protection of U-Boot command line
Graeme Russ
- [U-Boot] Password protection of U-Boot command line
Frans Meulenbroeks
- [U-Boot] Password protection of U-Boot command line
Wolfgang Denk
- [U-Boot] Password protection of U-Boot command line
Wolfgang Denk
- [U-Boot] Password protection of U-Boot command line
Graeme Russ
- [U-Boot] Password protection of U-Boot command line
Graeme Russ
- [U-Boot] Password protection of U-Boot command line
Mike Frysinger
- [U-Boot] Password protection of U-Boot command line
Wolfgang Denk
- [U-Boot] Password protection of U-Boot command line
Graeme Russ
- [U-Boot] Password protection of U-Boot command line
Wolfgang Denk
- [U-Boot] Password protection of U-Boot command line
Graeme Russ
- [U-Boot] Password protection of U-Boot command line
Wolfgang Denk
- [U-Boot] Patch: Fix device enumeration through API.
Tim Kientzle
- [U-Boot] Please pick up pending Integrator patches
Linus Walleij
- [U-Boot] Please pull u-boot-cfi-flash
Stefan Roese
- [U-Boot] Please pull u-boot-cfi-flash
Wolfgang Denk
- [U-Boot] Please pull u-boot-mmc
Wolfgang Denk
- [U-Boot] Please pull u-boot-mpc85xx.git
Wolfgang Denk
- [U-Boot] please pull u-boot-samsung/master
Minkyu Kang
- [U-Boot] please pull u-boot-samsung/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Tom Rini
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Wolfgang Denk
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Porting YAFFS2 to U-boot
Bud Miljkovic
- [U-Boot] Porting YAFFS2 to U-boot
Mike Frysinger
- [U-Boot] Porting YAFFS2 to U-boot
Charles Manning
- [U-Boot] Porting YAFFS2 to U-boot
Peter Barada
- [U-Boot] Porting YAFFS2 to U-boot
Wolfgang Denk
- [U-Boot] powerpc/85xx:debugger support patch
Prabhakar Kushwaha
- [U-Boot] powerpc/usb: fix bug of CPU halt when missing USB PHY clock
Andy Fleming
- [U-Boot] powerpc/usb: fix bug of CPU halt when missing USB PHY clock
Liu Shengzhou-B36685
- [U-Boot] PR1-Appliance UART Boot Issue
Amber and Sarosh
- [U-Boot] PR1-Appliance UART Boot Issue
Mike Frysinger
- [U-Boot] PR1-Appliance UART Boot Issue
Amber and Sarosh
- [U-Boot] PR1-Appliance UART Boot Issue
Mike Frysinger
- [U-Boot] PR1-Appliance UART Boot Issue
Amber and Sarosh
- [U-Boot] Problem in loading rootfs
Tahir Rauf
- [U-Boot] Pull request - microblaze
Michal Simek
- [U-Boot] Pull request - microblaze
Wolfgang Denk
- [U-Boot] Pull request for u-boot-marvell.git
Prafulla Wadaskar
- [U-Boot] Pull request for u-boot-marvell.git
Albert ARIBAUD
- [U-Boot] Pull request u-boot-blackfin.git (master branch)
Mike Frysinger
- [U-Boot] Pull request u-boot-blackfin.git (master branch)
Wolfgang Denk
- [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Mike Frysinger
- [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Wolfgang Denk
- [U-Boot] Pull request: nand flash
Wolfgang Denk
- [U-Boot] Pull request: nand flash
Scott Wood
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Wolfgang Denk
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-nds32/master
Macpaul Lin
- [U-Boot] Pull request: u-boot-nios/master
Thomas Chou
- [U-Boot] Pull request: u-boot-x86
Graeme Russ
- [U-Boot] Pull request: u-boot-x86
Wolfgang Denk
- [U-Boot] Q: Bad bits in Nand Write
Ran Shalit
- [U-Boot] Q: Bad bits in Nand Write
Scott Wood
- [U-Boot] Q: Bad bits in Nand Write
Ran Shalit
- [U-Boot] Refactoring eth_write_hwaddr() and friends (was: Re: [PATCH v2] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back)
Dirk Behme
- [U-Boot] REg : EIM Registers Configuration Required or Not to access NOR Flash in Flash_Header.s File
Balaji Sivakumar, ERS, HCLTech
- [U-Boot] Regarding bootscreen /splash screen
Sathishkumar Duraisamy
- [U-Boot] reminder for [PATCH 0/5] Support for qualcomm msm7630 board
Mohamed Haneef
- [U-Boot] serial : Device tree support for multiple serial devices.
Simon Glass
- [U-Boot] sh: build warnings in clock code
Mike Frysinger
- [U-Boot] sh: build warnings in clock code
Nobuhiro Iwamatsu
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Dirk Behme
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Stefano Babic
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Dirk Behme
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Stefano Babic
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Mike Frysinger
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Aneesh V
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Albert ARIBAUD
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Aneesh V
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Albert ARIBAUD
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Simon Glass
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Aneesh V
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Tom Rini
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Albert ARIBAUD
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Wolfgang Denk
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Graeme Russ
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Aneesh V
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Wolfgang Denk
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Aneesh V
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Wolfgang Denk
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Aneesh V
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Wolfgang Denk
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Aneesh V
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Wolfgang Denk
- [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
Aneesh V
- [U-Boot] SPL Linux Boot
Stefano Babic
- [U-Boot] SPL Linux Boot V13
Stefano Babic
- [U-Boot] SRIO patches
Andy Fleming
- [U-Boot] SRIO patches
Liu Gang
- [U-Boot] state of LL TEMAC evaluation
Stephan Linz
- [U-Boot] U-boot environment variables keep disappearing
andyjjones
- [U-Boot] u-boot for SPEAr1310
Pavel Machek
- [U-Boot] u-boot for SPEAr1310
Stefan Roese
- [U-Boot] u-boot for SPEAr1310
Marek Vasut
- [U-Boot] u-boot for SPEAr1310
Stefan Roese
- [U-Boot] u-boot for SPEAr1310
Marek Vasut
- [U-Boot] u-boot for SPEAr1310
Vipin Kumar
- [U-Boot] u-boot for SPEAr1310
Pavel Machek
- [U-Boot] u-boot for SPEAr1310
Stefan Roese
- [U-Boot] u-boot for SPEAr1310
Marek Vasut
- [U-Boot] u-boot for SPEAr1310
Stefan Roese
- [U-Boot] u-boot for SPEAr1310
Vipin Kumar
- [U-Boot] u-boot in debug mode P2020
Ivan Neskorodev
- [U-Boot] U-boot running on DDR fails to detect the CFI compliant flash
Francisco
- [U-Boot] u-boot-2011.12-r3 build fails without CONFIG_CMD_NET
Maxim Podbereznyy
- [U-Boot] u-boot-2011.12-r3 build fails without CONFIG_CMD_NET
Tom Rini
- [U-Boot] udc usb driver in imx-uboot
alex
- [U-Boot] Unable to run scripts with autoscr command
Asif Sulikeri
- [U-Boot] Unable to run scripts with autoscr command
Detlev Zundel
- [U-Boot] Unable to run scripts with autoscr command
Asif Sulikeri
- [U-Boot] Unable to run scripts with autoscr command
Asif Sulikeri
- [U-Boot] Unable to run scripts with autoscr command
Graeme Russ
- [U-Boot] Unable to run scripts with autoscr command
Asif Sulikeri
- [U-Boot] Unable to run scripts with autoscr command
Graeme Russ
- [U-Boot] Unable to run scripts with autoscr command
Asif Sulikeri
- [U-Boot] Unable to run scripts with autoscr command
Graeme Russ
- [U-Boot] Unable to run scripts with autoscr command
Asif Sulikeri
- [U-Boot] Unable to run scripts with autoscr command
Graeme Russ
- [U-Boot] Unable to run scripts with autoscr command
Asif Sulikeri
- [U-Boot] Unable to run scripts with autoscr command
Graeme Russ
- [U-Boot] usb ethernet working on panda?
Kumar Gala
- [U-Boot] usb ethernet working on panda?
Govindraj
- [U-Boot] USB support in U-boot for MX23EVK board
Shilpa Budhihal
- [U-Boot] USB support in U-boot for MX23EVK board
Wolfgang Denk
- [U-Boot] USB support in U-boot for MX23EVK board
Marek Vasut
- [U-Boot] USB support in U-boot for MX23EVK board
Wolfgang Denk
- [U-Boot] USB support in U-boot for MX23EVK board
Marek Vasut
Last message date:
Wed Feb 29 23:54:36 CET 2012
Archived on: Wed Feb 29 23:54:49 CET 2012
This archive was generated by
Pipermail 0.09 (Mailman edition).