[U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q

[Marek Vasut]

> even i'm new to u-boot. So didnt know. And I just asked if the present USB
> driver in u-boot can be enabled for mx23evk board?
> 

DO NOT TOP-POST!!!
DO NOT DROP CC!!!

And to answer your question, if you add support for mx23evk, yes.

M

> 
> Thanks and Regards,
> Shilpa
> ________________________________________
> From: Marek Vasut [marek.vasut at gmail.com]
> Sent: 12 February, 2012 2:27 PM
> To: Shilpa Budhihal
> Cc: Dirk Behme; Fabio Estevam; u-boot at lists.denx.de; Wolfgang Grandegger
> Subject: Re: [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q
> 
> > Atleast could that driver be enabled by any means? Please let me know if
> > any such procedure is der to enable the driver. I'm very much confused as
> > to start with it.
> 
> DO NOT TOP-POST!!!
> 
> What do you mean by "enabled by any means"?
> 
> M
> 
> > Thanks and Regards,
> > Shilpa
> > ________________________________________
> > From: u-boot-bounces at lists.denx.de [u-boot-bounces at lists.denx.de] on
> > behalf of Marek Vasut [marek.vasut at gmail.com] Sent: 12 February, 2012
> > 2:16 PM To: Dirk Behme
> > Cc: Fabio Estevam; u-boot at lists.denx.de; Wolfgang Grandegger
> > Subject: Re: [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the
> > MX6Q
> > 
> > > On 11.02.2012 19:46, Fabio Estevam wrote:
> > > > On Sat, Feb 11, 2012 at 5:12 AM, Marek Vasut<marek.vasut at gmail.com>
> 
> wrote:
> > > >> btw Fabio, do we support mx6q USB host in mainline Linux ?
> > > > 
> > > > Not yet, Marek.
> > > 
> > > Linaro has it working with
> > > 
> > > http://git.linaro.org/gitweb?p=bsp/freescale/linux-linaro.git;a=commit;
> > > h= de 941f9ac0b59c34053618e90e3c1f1d8b5a2d22
> > > 
> > > http://git.linaro.org/gitweb?p=bsp/freescale/linux-linaro.git;a=commit;
> > > h= 40 26cfa27332f2e53cfbf72cc98cf4db8c2f2127
> > > 
> > > It shouldn't be that hard to apply these to plain mainline Linux (?).
> > 
> > Do you believe this will be accepted into mainline Linux if basically the
> > same stuff, except for mx28 did NOT get accepted? The shape of the code
> > was almost identical, maybe better. Actually, even the file names are the
> > same here and in the old FSL BSP for mx28.
> > 
> > M
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot
> > 
> > ________________________________
> > 
> > DISCLAIMER:
> > 
> > This email may contain confidential information and is intended only for
> > the use of the specific individual(s) to which it is addressed. If you
> > are not the intended recipient of this email, you are hereby notified
> > that any unauthorized use, dissemination or copying of this email or the
> > information contained in it or attached to it is strictly prohibited. If
> > you received this message in error, please immediately notify the sender
> > at Infotech or Mail.Admin at infotech-enterprises.com and delete the
> > original message.