February 2012 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Feb 1 00:04:31 CET 2012
Ending: Wed Feb 29 23:54:36 CET 2012
Messages: 2068

• [U-Boot] Does U-boot support ASLR?   Jason Markley (ggsg)
• [U-Boot] Does U-boot support ASLR?   Jason Markley (ggsg)
• [U-Boot] Does U-boot support ASLR?   Jason Markley (ggsg)
• [U-Boot] Does U-boot support ASLR?   Jason Markley (ggsg)
• [U-Boot] Does U-boot support ASLR?   Jason Markley (ggsg)
• [U-Boot] Does U-boot support ASLR?   Jason Markley (ggsg)
• [U-Boot] [PATCH] add STM29F400BB to table of supported legacy flashs   "David Müller (ELSOFT AG)"
• [U-Boot] [PING] Re: [PATCH V3] ARM: fix s3c2410 timer code   "David Müller (ELSOFT AG)"
• [U-Boot] ARM ld: .bss overlaps section .rel.dyn   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script   Albert ARIBAUD
• [U-Boot] [PING] Re: [PATCH] ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board   Albert ARIBAUD
• [U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script   Albert ARIBAUD
• [U-Boot] [PATCH V4] nand_spl_simple: store ecc data on the stack   Albert ARIBAUD
• [U-Boot] compile the u-boot   Albert ARIBAUD
• [U-Boot] [PATCH v2] skat91: add support for SK-AT91SAM9/SIM508 board   Albert ARIBAUD
• [U-Boot] [PATCH v4] arm, arm-kirkwood: disable l2c before linux boot   Albert ARIBAUD
• [U-Boot] flash post test   Albert ARIBAUD
• [U-Boot] [PATCH v3 0/6] Introduce generic relocation feature   Albert ARIBAUD
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Albert ARIBAUD
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Albert ARIBAUD
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] ARM ld: .bss overlaps section .rel.dyn   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Albert ARIBAUD
• [U-Boot] [RFC PATCH 2/4] OMAP3+: fix issues with Thumb build   Albert ARIBAUD
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Albert ARIBAUD
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Albert ARIBAUD
• [U-Boot] [UPDATED] Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board   Albert ARIBAUD
• [U-Boot] [patch] ARM: Faraday SoC support   Albert ARIBAUD
• [U-Boot] flash post test   Albert ARIBAUD
• [U-Boot] http://patchwork.ozlabs.org/patch/136415/ seems to break HUSH parser?   Albert ARIBAUD
• [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number   Albert ARIBAUD
• [U-Boot] flash post test   Albert ARIBAUD
• [U-Boot] [PATCH 1/3 v8] arm926ejs: add NXP LPC32x0 cpu series support   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Albert ARIBAUD
• [U-Boot] [PATCH V2] edminiv2: add hush parser, cmdline editing and long help   Albert ARIBAUD
• [U-Boot] Pull request for u-boot-marvell.git   Albert ARIBAUD
• [U-Boot] please pull u-boot-samsung/master   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: Convert spear3xx and spear6xx boards to boards.cfg   Albert ARIBAUD
• [U-Boot] [PATCH 1/3 v8] arm926ejs: add NXP LPC32x0 cpu series support   Albert ARIBAUD
• [U-Boot] [PATCH 10/17] arm: Add control over cachability of memory regions   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [STATUS] [ARM]   Albert ARIBAUD
• [U-Boot] [STATUS] [ARM]   Albert ARIBAUD
• [U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script   Albert ARIBAUD
• [U-Boot] [STATUS] [ARM]   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Albert ARIBAUD
• [U-Boot] [PATCH V13 12/12] arm: Add Prep subcommand support to bootm   Albert ARIBAUD
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [STATUS] [ARM]   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/7] Tidy up ARM link scripts   Albert ARIBAUD
• [U-Boot] [PATCH] SPEAr: Add ARM relocation support   Albert ARIBAUD
• [U-Boot] ARM926: U-Boot crash while relocating   Albert ARIBAUD
• [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/7] Tidy up ARM link scripts   Albert ARIBAUD
• [U-Boot] [PATCH v2 6/7] arm: add a common .lds link script   Albert ARIBAUD
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Albert ARIBAUD
• [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number   Albert ARIBAUD
• [U-Boot] [PATCH] arm:fix:cleanup: Volatile keyword removal   Albert ARIBAUD
• [U-Boot] [PATCH] integrator: stop calling pci_init() twice   Albert ARIBAUD
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Albert ARIBAUD
• [U-Boot] [PATCH v4 04/20] arm: fdt: Ensure that an embedded fdt is word-aligned   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] at91: modified NAND flash timing on meesc board   Albert ARIBAUD
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Albert ARIBAUD
• [U-Boot] [PATCH v2] Change kernel address in dataflash to match u-boot's size   Albert ARIBAUD
• [U-Boot] [PATCH] integrator: rewrite the AP PCI driver   Albert ARIBAUD
• [U-Boot] [PATCH] integrator: rewrite the AP PCI driver   Albert ARIBAUD
• [U-Boot] [PATCH 1/2 V4] arm926: Flush the data cache before disabling it   Albert ARIBAUD
• [U-Boot] [PATCH] integrator: update the Integrator/CP config   Albert ARIBAUD
• [U-Boot] [PATCH 0/6] Highbank platform updates   Albert ARIBAUD
• [U-Boot] [PATCH v2] Change kernel address in dataflash to match u-boot's size   Albert ARIBAUD
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Albert ARIBAUD
• [U-Boot] [PATCH] integrator: rewrite the AP PCI driver   Albert ARIBAUD
• [U-Boot] [PATCH v4 04/20] arm: fdt: Ensure that an embedded fdt is word-aligned   Albert ARIBAUD
• [U-Boot] [PATCH 1/2 V3] arm926: Flush the data cache before disabling it   Albert ARIBAUD
• [U-Boot] [PATCH v6 1/7] arm, davinci: Add lowlevel_init for SoCs other than DM644X   Albert ARIBAUD
• [U-Boot] [PATCH v6 0/7] Change ARM926EJ-S startup code, hawkboard and calimain   Albert ARIBAUD
• [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup   Albert ARIBAUD
• [U-Boot] [PATCH] Ethernut 5: fix build error for board_mmc_getcd()   Albert ARIBAUD
• [U-Boot] [PATCH V3] ARM: fix s3c2410 timer code   Albert ARIBAUD
• [U-Boot] [PATCH v4 04/20] arm: fdt: Ensure that an embedded fdt is word-aligned   Albert ARIBAUD
• [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup   Albert ARIBAUD
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] at91: modified NAND flash timing on meesc board   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] at91: modified NAND flash timing on otc570 board   Albert ARIBAUD
• [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed   Albert ARIBAUD
• [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed   Albert ARIBAUD
• [U-Boot] [PATCH v2] Change kernel address in dataflash to match u-boot's size   Albert ARIBAUD
• [U-Boot] [PATCH] AT91SAM9*: Change kernel address in dataflash to match u-boot's size   Albert ARIBAUD
• [U-Boot] [PATCH v2 6/7] arm: add a common .lds link script   Albert ARIBAUD
• [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script   Albert ARIBAUD
• [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script   Albert ARIBAUD
• [U-Boot] [PATCH v4 04/13] arm: Add start_call_board_init_r() to each start.S   Albert ARIBAUD
• [U-Boot] [PATCH v4 02/13] Add generic relocation feature   Albert ARIBAUD
• [U-Boot] [PATCH v4 0/13] Introduce generic relocation feature   Albert ARIBAUD
• [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script   Albert ARIBAUD
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Albert ARIBAUD
• [U-Boot] [RFC} [PATCH] Feature removal due to lack of custodians   Albert ARIBAUD
• [U-Boot] [RFC} [PATCH] Feature removal due to lack of custodians   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-pxa / fix   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-pxa / fix   Albert ARIBAUD
• [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: Add .data/.rodata/.bss section starts to gd_t   Albert ARIBAUD
• [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard   Albert ARIBAUD
• [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc   Albert ARIBAUD
• [U-Boot] [PATCH 0/2] Highbank fixes for 2012.03   Albert ARIBAUD
• [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: Define change_bit routine   Albert ARIBAUD
• [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc   Albert ARIBAUD
• [U-Boot] [PATCH 1/5] msm7x30: Add support for low speed uart on msm7x30   Albert ARIBAUD
• [U-Boot] [PATCH 2/5] msm7x30: Add support for interprocessor communication   Albert ARIBAUD
• [U-Boot] [PATCH 3/5] msm7x30: Add support for Qualcomm msm7630 soc   Albert ARIBAUD
• [U-Boot] [PATCH 4/5] Add support for mmc read and writes   Albert ARIBAUD
• [U-Boot] [PATCH v2] Ethernut 5: fix build error   Albert ARIBAUD
• [U-Boot] [PATCH] EXYNOS: SMDK5250: Add support for DDR3 memory.   Hatim Ali
• [U-Boot] [PATCH v2 0/4] Add DDR3 memory support for SMDK5250.   Hatim Ali
• [U-Boot] [PATCH 1/4] SMDK5250: LPDDR2: Renaming the dmc_init.c file to dmc_init_lpddr2.c   Hatim Ali
• [U-Boot] [PATCH 2/4] SMDK5250: LPDDR2: Renaming the PHY_RESET_VAL macro and fixing a minor typo.   Hatim Ali
• [U-Boot] [PATCH 3/4] SMDK5250: Creating a common file to be used by all variants of DDR   Hatim Ali
• [U-Boot] [PATCH 4/4] SMDK5250: DDR3: Add memory initialization code for DDR3.   Hatim Ali
• [U-Boot] [PATCH v3 0/5] Add DDR3 memory support for SMDK5250   Hatim Ali
• [U-Boot] [PATCH 1/5] SMDK5250: LPDDR2: Renaming the dmc_init.c file to dmc_init_lpddr2.c   Hatim Ali
• [U-Boot] [PATCH 2/5] SMDK5250: LPDDR2: Renaming the PHY_RESET_VAL macro and fixing a minor typo.   Hatim Ali
• [U-Boot] [PATCH 3/5] SMDK5250: Creating a common file to be used by all variants of DDR   Hatim Ali
• [U-Boot] [PATCH 4/5] SMDK5250: DDR3: Add memory initialization code for DDR3.   Hatim Ali
• [U-Boot] [PATCH 5/5] SMDK5250: Selecting DDR3 memory by default.   Hatim Ali
• [U-Boot] [PATCH v7 4/4] EXYNOS: SMDK5250: Add MMC SPL support   Doug Anderson
• [U-Boot] [PATCH] EXYNOS: SMDK5250: Add support for DDR3 memory.   Doug Anderson
• [U-Boot] [PATCH] EXYNOS: SMDK5250: Support all 4 UARTs   Doug Anderson
• [U-Boot] [PATCH] EXYNOS: SMDK5250: Add support for DDR3 memory.   Doug Anderson
• [U-Boot] [PATCH v2] EXYNOS: SMDK5250: Support all 4 UARTs   Doug Anderson
• [U-Boot] [PATCH] env: Add the ability to merge the saved env with the default.   Doug Anderson
• [U-Boot] [PATCH] EXYNOS: SMDK5250: Support all 4 UARTs   Doug Anderson
• [U-Boot] Facing the problem with yaffs2 from uboot   VISWANADHULA BALAJI
• [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Stefano Babic
• [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects   Stefano Babic
• [U-Boot] [PATCH] i.mx: i.mx5: update imx_get_mac_from_fuse function   Stefano Babic
• [U-Boot] SPL Linux Boot   Stefano Babic
• [U-Boot] [PATCH] AM3517: Changed default clock rate for AM3517   Stefano Babic
• [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects   Stefano Babic
• [U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO   Stefano Babic
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Stefano Babic
• [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects   Stefano Babic
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Stefano Babic
• [U-Boot] [PATCH 00/28] Add link-local addressing support   Stefano Babic
• [U-Boot] [PATCH] OMAP3: TAM3517: update ehci interface   Stefano Babic
• [U-Boot] [PATCH V4] ARM: omap3: Added Teejet mt_ventoux   Stefano Babic
• [U-Boot] SPL Linux Boot V13   Stefano Babic
• [U-Boot] [PATCH V13 01/12] Add cmd_spl command   Stefano Babic
• [U-Boot] [PATCH V13 02/12] devkit8000: add config for spl command   Stefano Babic
• [U-Boot] [PATCH V13 03/12] omap-common: Add NAND SPL linux booting   Stefano Babic
• [U-Boot] [PATCH V13 04/12] devkit8000/spl: init GPMC for dm9000 in SPL   Stefano Babic
• [U-Boot] [PATCH V13 05/12] omap-common/spl: Add linux boot to SPL   Stefano Babic
• [U-Boot] [PATCH V13 06/12] omap/spl: change output of spl_parse_image_header   Stefano Babic
• [U-Boot] [PATCH V13 07/12] devkit8000: Implement and activate direct OS boot   Stefano Babic
• [U-Boot] [PATCH V13 08/12] Add cache functions to SPL for armv7   Stefano Babic
• [U-Boot] [PATCH V13 09/12] OMAP3: SPL: do not call I2C init if no I2C is set.   Stefano Babic
• [U-Boot] [PATCH V13 10/12] SPL: call cleanup_before_linux() before booting Linux   Stefano Babic
• [U-Boot] [PATCH V13 11/12] OMAP3: twister: add support to boot Linux from SPL   Stefano Babic
• [U-Boot] [PATCH V13 12/12] arm: Add Prep subcommand support to bootm   Stefano Babic
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
• [U-Boot] [UPDATED] Pull request: u-boot-imx   Stefano Babic
• [U-Boot] [PATCH V7] mcx: support for HTKW mcx board   Stefano Babic
• [U-Boot] Avoiding reload on ARM U-BOOT   Stefano Babic
• [U-Boot] [PATCH v4 1/5] net: fec_mxc: add 1000 Mbps selection   Stefano Babic
• [U-Boot] [PATCH 1/3] MX35: add missing get_ticks() and get_tbclk()   Stefano Babic
• [U-Boot] [PATCH 2/3] MX31: add missing get_tbclk()   Stefano Babic
• [U-Boot] [PATCH 3/3] MX5/MX6: add missing get_ticks() and get_tbclk()   Stefano Babic
• [U-Boot] [PATCH 1/3] mx28evk: add RTC support   Stefano Babic
• [U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO   Stefano Babic
• [U-Boot] [PATCH 1/3] mx28evk: add RTC support   Stefano Babic
• [U-Boot] [PATCH 2/3] mx28evk: add USB support   Stefano Babic
• [U-Boot] [PATCH 3/3] mx28evk: add SPI support   Stefano Babic
• [U-Boot] http://patchwork.ozlabs.org/patch/136415/ seems to break HUSH parser?   Stefano Babic
• [U-Boot] [PATCH] OMAP3: TAM3517: update ehci interface   Stefano Babic
• [U-Boot] [PATCH] OMAP3: TAM3517: update ehci interface   Stefano Babic
• [U-Boot] [PATCH V3] mx28: fix SPL code to make USB booting work   Stefano Babic
• [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup   Stefano Babic
• [U-Boot] [PATCH V3] mx28: fix SPL code to make USB booting work   Stefano Babic
• [U-Boot] [PATCH] MX28: Fix get_timer() / get_tbclk() issue   Stefano Babic
• [U-Boot] [PATCH] MX27: add missing get_tbclk()   Stefano Babic
• [U-Boot] [PATCH] MX27: add missing get_tbclk()   Stefano Babic
• [U-Boot] [PATCH] OMAP3: TAM3517: update ehci interface   Stefano Babic
• [U-Boot] [PATCH v4 4/7] ehci-omap: Clean up added ehci-omap.c   Stefano Babic
• [U-Boot] [PATCH v4 5/7] OMAP3+: Clock: Adding ehci clock enabling   Stefano Babic
• [U-Boot] [PATCH v4 6/7] OMAP4: clock-common: Move the usb dppl configuration to new func   Stefano Babic
• [U-Boot] [PATCH v4 7/7] OMAP4: ehci-omap: enable ehci-omap for panda boards   Stefano Babic
• [U-Boot] [PATCH v4 3/7] ehci-omap: driver for EHCI host on OMAP3   Stefano Babic
• [U-Boot] [PATCH V2] MX27: add missing get_tbclk()   Stefano Babic
• [U-Boot] [PATCH V2] OMAP3: TAM3517: update ehci interface   Stefano Babic
• [U-Boot] [PATCH V5] ARM: omap3: Added Teejet mt_ventoux   Stefano Babic
• [U-Boot] [PATCH V8] mcx: support for HTKW mcx board   Stefano Babic
• [U-Boot] [PATCH V6 - Part 2 - 3/3] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform   Stefano Babic
• [U-Boot] [PATCH V6 - Part 5 - 1/1] mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash   Stefano Babic
• [U-Boot] [PATCH V6 - Part 4 - 1/1] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select   Stefano Babic
• [U-Boot] [PATCH V6 - Part 1 - 1/1] mx6q: define GPIO macros for translating between ordinals and port:index   Stefano Babic
• [U-Boot] [PATCH V6 - Part 2 - 1/3] mxc_spi: move machine specifics into CPU headers   Stefano Babic
• [U-Boot] [PATCH V6 - Part 2 - 2/3] mx6q: Add support for ECSPI through mxc_spi driver   Stefano Babic
• [U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high   Stefano Babic
• [U-Boot] [PATCH 1/5] mx53loco: Use gpio_direction_input prior to gpio_get_value   Stefano Babic
• [U-Boot] [PATCH 1/5] mx53loco: Use gpio_direction_input prior to gpio_get_value   Stefano Babic
• [U-Boot] [PATCH 2/5] mx53ard: Use gpio_direction_input prior to gpio_get_value   Stefano Babic
• [U-Boot] [PATCH 5/5] mx51evk: Use gpio_direction_input prior to gpio_get_value   Stefano Babic
• [U-Boot] [PATCH 4/5] mx53smd: Use gpio_direction_input prior to gpio_get_value   Stefano Babic
• [U-Boot] [PATCH 1/5] mx53loco: Use gpio_direction_input prior to gpio_get_value   Stefano Babic
• [U-Boot] [PATCH 3/5] mx53evk: Use gpio_direction_input prior to gpio_get_value   Stefano Babic
• [U-Boot] Enabling Cache in SPL - how to speed up booting from SPL   Stefano Babic
• [U-Boot] Enabling Cache in SPL - how to speed up booting from SPL   Stefano Babic
• [U-Boot] Build u-Boot for NAND boot on i.MX53x platform   Stefano Babic
• [U-Boot] Build u-Boot for NAND boot on i.MX53x platform   Stefano Babic
• [U-Boot] [PATCH 1/2] mx35pdk: Remove duplicate CPU revision and reset cause information   Stefano Babic
• [U-Boot] [PATCH 1/2] mx35pdk: Remove duplicate CPU revision and reset cause information   Stefano Babic
• [U-Boot] [PATCH 2/2] mx35: generic: Let get_reset_cause be defined only when CONFIG_DISPLAY_CPUINFO is selected   Stefano Babic
• [U-Boot] [PATCH v2 1/2] mx35pdk: Remove duplicate CPU revision and reset cause information   Stefano Babic
• [U-Boot] [PATCH V13 12/12] arm: Add Prep subcommand support to bootm   Stefano Babic
• [U-Boot] [STATUS] [ARM]   Stefano Babic
• [U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high   Stefano Babic
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
• [U-Boot] [PATCH v5 5/5] i.mx6q: mx6qsabrelite: Update the network configuration   Stefano Babic
• [U-Boot] [PATCH 2/5] mx35pdk: Provide proper range for memtest   Stefano Babic
• [U-Boot] [PATCH V13 01/12] Add cmd_spl command   Stefano Babic
• [U-Boot] [PATCH] Remove execute permissions from source files   Stefano Babic
• [U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs   Stefano Babic
• [U-Boot] [PATCH 3/3] imx31: tt01: fix hush parser config, add release config   Stefano Babic
• [U-Boot] [PATCH 2/3] tt01: add video support   Stefano Babic
• [U-Boot] [PATCH 3/3] tt01: fix hush parser config, add release config   Stefano Babic
• [U-Boot] [PATCH 1/3] tt01: fix environment size   Stefano Babic
• [U-Boot] [PATCH V2 2/3] tt01: add video support   Stefano Babic
• [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup   Stefano Babic
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
• [U-Boot] [PATCH V13 04/12] devkit8000/spl: init GPMC for dm9000 in SPL   Stefano Babic
• [U-Boot] [PATCH 0/2] i.mx28: Elimintated magic numbers for scratch register addresses   Stefano Babic
• [U-Boot] [PATCH 1/2] i.mx28: Added register definitions for DIGCTL registers   Stefano Babic
• [U-Boot] [PATCH 2/2] i.mx28: Replaced magic numbers for scratch register addresses with register definitions   Stefano Babic
• [U-Boot] [PATCH] mx6q: mx6qsabrelite: Update the README   Stefano Babic
• [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q   Stefano Babic
• [U-Boot] [PATCH v2 2/2] mx6qsabrelite: add and enable USB Host 1 support   Stefano Babic
• [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Stefano Babic
• [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Stefano Babic
• [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Stefano Babic
• [U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset   Stefano Babic
• [U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset   Stefano Babic
• [U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset   Stefano Babic
• [U-Boot] [PATCH 1/9] Define UART4 and UART5 base addresses   Stefano Babic
• [U-Boot] [PATCH 2/9] NET: fec_mxc.c: Add support for MII for MX5 SOCs   Stefano Babic
• [U-Boot] [PATCH 3/9] NET: fec_mxc.c: Add a way to disable auto negotiation   Stefano Babic
• [U-Boot] [PATCH 4/9] MX5: Add definitions for SATA controller   Stefano Babic
• [U-Boot] [PATCH 5/9] SATA: check for return value from sata functions   Stefano Babic
• [U-Boot] [PATCH 6/9] MX53: add function to set SATA clock to internal   Stefano Babic
• [U-Boot] [PATCH 7/9] SATA: add driver for MX5 / MX6 SOCs   Stefano Babic
• [U-Boot] [PATCH 8/9] MX53: Add support to ESG ima3 board   Stefano Babic
• [U-Boot] [PATCH 9/9] MX53: mx53loco: Add SATA support   Stefano Babic
• [U-Boot] [PATCH 8/9] MX53: Add support to ESG ima3 board   Stefano Babic
• [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Stefano Babic
• [U-Boot] [PATCH 7/9] Remove CONFIG_SYS_EXTBDINFO from snapper9260.h   Stefano Babic
• [U-Boot] [PATCH 9/9] ppc: Change memsz variable to signed char   Stefano Babic
• [U-Boot] [PATCH 8/9] m68k: Change memsz to a signed char to avoid warning   Stefano Babic
• [U-Boot] [PATCH v2] imximage: Remove overwriting of flash_offset   Stefano Babic
• [U-Boot] [PATCH] ARM: omap3: temporary disable USB on TAM3517 boards   Stefano Babic
• [U-Boot] How to Change the DDR3 Speed to low in U-boot   Balaji Sivakumar, ERS, HCLTech
• [U-Boot] REg : EIM Registers Configuration Required or Not to access NOR Flash in Flash_Header.s File   Balaji Sivakumar, ERS, HCLTech
• [U-Boot] Porting YAFFS2 to U-boot   Peter Barada
• [U-Boot] [PATCH] ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition.   Peter Barada
• [U-Boot] [PATCH] ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition.   Peter Barada
• [U-Boot] [PATCH v2] ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition   Peter Barada
• [U-Boot] [PATCH 2/2] omap3logic: Add missing GPMC pinmux for LAN92xx access   Peter Barada
• [U-Boot] [PATCH v2] ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition   Peter Barada
• [U-Boot] [PATCH v3] ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition   Peter Barada
• [U-Boot] [PATCH] [OMAP3] Pass timings structure pointer to board_get_mem_timings()   Peter Barada
• [U-Boot] [PATCH] ARM: Add .data/.rodata/.bss section starts to gd_t   Peter Barada
• [U-Boot] [PATCH] ARM: Add .data/.rodata/.bss section starts to gd_t   Peter Barada
• [U-Boot] [PATCH] AVR32 removal due to lack of custodian.   Jerry Van Baren
• [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects   Dirk Behme
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Dirk Behme
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Dirk Behme
• [U-Boot] i.MX5/6 U-Boot: Cache enabling (was: Re: Skipping relocation RAM to RAM, esp. on i.MX6?)   Dirk Behme
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Dirk Behme
• [U-Boot] [PATCH v4 1/5] net: fec_mxc: add 1000 Mbps selection   Dirk Behme
• [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()   Dirk Behme
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Dirk Behme
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Dirk Behme
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Dirk Behme
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Dirk Behme
• [U-Boot] [PATCH v2] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Dirk Behme
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Dirk Behme
• [U-Boot] i.MX5/6 U-Boot: Cache enabling   Dirk Behme
• [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects   Dirk Behme
• [U-Boot] [PATCH 2/2] mx6qsabrelite: add and enable USB Host 1 support   Dirk Behme
• [U-Boot] [PATCH 1/2] usb/ehci: Add USB support for the MX6Q   Dirk Behme
• [U-Boot] Refactoring eth_write_hwaddr() and friends (was: Re: [PATCH v2] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back)   Dirk Behme
• [U-Boot] [PATCH v2 0/2] usb/mx6q: USB EHCI support for MX6Q boards   Dirk Behme
• [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q   Dirk Behme
• [U-Boot] i.MX6Q USB host support for mainline Linux (was: Re: [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q)   Dirk Behme
• [U-Boot] [STATUS] [ARM]   Dirk Behme
• [U-Boot] [PATCH] mx6q: mx6qsabrelite: Update the README   Dirk Behme
• [U-Boot] imximage: Create i.MX6 NOR flash images (was: [PATCH v5 1/1] imximage: Add MX53 boot image support)   Dirk Behme
• [U-Boot] [PATCH] omap3_beagle: Change MAINTAINERS entry   Dirk Behme
• [U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset   Dirk Behme
• [U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset   Dirk Behme
• [U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset   Dirk Behme
• [U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset   Dirk Behme
• [U-Boot] [PATCH 8/9] MX53: Add support to ESG ima3 board   Dirk Behme
• [U-Boot] [PATCH 8/9] MX53: Add support to ESG ima3 board   Dirk Behme
• [U-Boot] [PATCH v2] imximage: Remove overwriting of flash_offset   Dirk Behme
• [U-Boot] fsl_esdhc.c: eMMC 4.4 support?   Dirk Behme
• [U-Boot] [PATCH v2] imximage: Remove overwriting of flash_offset   Dirk Behme
• [U-Boot] fsl_esdhc.c: eMMC 4.4 support?   Dirk Behme
• [U-Boot] ARM: Update mach-types   Dirk Behme
• [U-Boot] [PATCH v2] mx31: Setup AIPS registers   Dirk Behme
• [U-Boot] [PATCH v2] Change kernel address in dataflash to match u-boot's size   Alexandre Belloni
• [U-Boot] [PATCH] AT91SAM9*: Change kernel address in dataflash to match u-boot's size   Alexandre Belloni
• [U-Boot] [PATCH v2] Change kernel address in dataflash to match u-boot's size   Alexandre Belloni
• [U-Boot] [PATCH v3] AT91SAM9*: Change kernel address in dataflash to match u-boot's size   Alexandre Belloni
• [U-Boot] [PATCH v3] AT91SAM9*: Change kernel address in dataflash to match u-boot's size   Alexandre Belloni
• [U-Boot] [PATCH v3] AT91SAM9*: Change kernel address in dataflash to match u-boot's size   Alexandre Belloni
• [U-Boot] [v2 1/4] USB: Armada100: Add UTMI PHY interface driver   Ajay Bhargav
• [U-Boot] [v2 2/4] USB: Armada100: ECHI Driver for Armada100 SOCs   Ajay Bhargav
• [U-Boot] [v2 3/4] Armada100: gplugD: Add USB command support   Ajay Bhargav
• [U-Boot] [v2 4/4] Armada100: gplugD: Add FAT & EXT2 command support   Ajay Bhargav
• [U-Boot] [v2 1/4] USB: Armada100: Add UTMI PHY interface driver   Ajay Bhargav
• [U-Boot] [v2 2/4] USB: Armada100: ECHI Driver for Armada100 SOCs   Ajay Bhargav
• [U-Boot] [v2 4/4] Armada100: gplugD: Add FAT & EXT2 command support   Ajay Bhargav
• [U-Boot] [v3 1/3] USB: Armada100: Add UTMI PHY interface driver   Ajay Bhargav
• [U-Boot] [v3 2/3] USB: Armada100: EHCI Driver for Armada100 SOCs   Ajay Bhargav
• [U-Boot] [v3 3/3] Armada100: gplugD: Add USB command support   Ajay Bhargav
• [U-Boot] [PATCH] Armada100: gplugD: Add FAT & EXT2 command support   Ajay Bhargav
• [U-Boot] [v3 1/3] USB: Armada100: Add UTMI PHY interface driver   Ajay Bhargav
• [U-Boot] [PATCH v4] tools/env: add posibility to inject configuration   Andreas Bießmann
• [U-Boot] [PATCH] AVR32 removal due to lack of custodian.   Andreas Bießmann
• [U-Boot] [PATCH] AVR32 removal due to lack of custodian.   Andreas Bießmann
• [U-Boot] [PATCH 1/2] arm/km: speed up i2c access for keymile boards   Holger Brunck
• [U-Boot] USB support in U-boot for MX23EVK board   Shilpa Budhihal
• [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q   Shilpa Budhihal
• [U-Boot] [PATCH v4] arm, arm-kirkwood: disable l2c before linux boot   Ian Campbell
• [U-Boot] [PATCH] kirkwood_spi: correct access to irq_mask register   Ian Campbell
• [U-Boot] [PATCH] ARM: dreamplug: Enable FDT support   Ian Campbell
• [U-Boot] [PATCH] ARM: dreamplug: Enable FDT support   Ian Campbell
• [U-Boot] [PATCH 2/2] nios2: implement get_ticks and get_tbclk   Thomas Chou
• [U-Boot] [PATCH 1/2] nios2-generic: Fix logic around choosing UART   Thomas Chou
• [U-Boot] [PATCH 1/1] nios2 - adjust gbl data off to account for bd_info   Thomas Chou
• [U-Boot] Pull request: u-boot-nios/master   Thomas Chou
• [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup   Robert Deliën
• [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup   Robert Deliën
• [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH 2/2] i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH] Elimintated magic numbers for scratch register addresses   Robert Deliën
• [U-Boot] [PATCH 1/2] i.mx28: Added register definitions for DIGCTL registers   Robert Deliën
• [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL   Robert Deliën
• [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL   Robert Deliën
• [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL   Robert Deliën
• [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL   Robert Deliën
• [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL   Robert Deliën
• [U-Boot] [PATCH 4/4] Added NAND flash pin configuration   Robert Deliën
• [U-Boot] [PATCH 4/4] Added NAND flash pin configuration   Robert Deliën
• [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH] Elimintated magic numbers for scratch register addresses   Robert Deliën
• [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup   Robert Deliën
• [U-Boot] [PATCH 1/4 v5] Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8   Robert Deliën
• [U-Boot] [PATCH 4/4] Added NAND flash pin configuration   Robert Deliën
• [U-Boot] [PATCH v2] arm, arm-kirkwood: disable l2c before linux boot   Wolfgang Denk
• [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support   Wolfgang Denk
• [U-Boot] Can u-Boot Ran from RAM?   Wolfgang Denk
• [U-Boot] Can u-Boot Ran from RAM?   Wolfgang Denk
• [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support   Wolfgang Denk
• [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support   Wolfgang Denk
• [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support   Wolfgang Denk
• [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support   Wolfgang Denk
• [U-Boot] [PATCH 2/2] da850evm: read mac address from I2C EEPROM on AM18x EVM   Wolfgang Denk
• [U-Boot] Porting YAFFS2 to U-boot   Wolfgang Denk
• [U-Boot] [PATCH 2/2] da850evm: read mac address from I2C EEPROM on AM18x EVM   Wolfgang Denk
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Wolfgang Denk
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Wolfgang Denk
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Wolfgang Denk
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Wolfgang Denk
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Wolfgang Denk
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Wolfgang Denk
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Wolfgang Denk
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Wolfgang Denk
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Wolfgang Denk
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Wolfgang Denk
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Wolfgang Denk
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Wolfgang Denk
• [U-Boot] Does U-boot support ASLR?   Wolfgang Denk
• [U-Boot] Does U-boot support ASLR?   Wolfgang Denk
• [U-Boot] Password protection of U-Boot command line   Wolfgang Denk
• [U-Boot] Does U-boot support ASLR?   Wolfgang Denk
• [U-Boot] Password protection of U-Boot command line   Wolfgang Denk
• [U-Boot] Password protection of U-Boot command line   Wolfgang Denk
• [U-Boot] Does U-boot support ASLR?   Wolfgang Denk
• [U-Boot] Password protection of U-Boot command line   Wolfgang Denk
• [U-Boot] Password protection of U-Boot command line   Wolfgang Denk
• [U-Boot] Password protection of U-Boot command line   Wolfgang Denk
• [U-Boot] Password protection of U-Boot command line   Wolfgang Denk
• [U-Boot] [i2c] Pull request   Wolfgang Denk
• [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] Please pull u-boot-cfi-flash   Wolfgang Denk
• [U-Boot] [PATCH] fw_env.h: fix comment   Wolfgang Denk
• [U-Boot] [PATCH] MAKEALL: display SPL size if present   Wolfgang Denk
• [U-Boot] Password protection of U-Boot command line   Wolfgang Denk
• [U-Boot] [PATCH] fw_env.c: use default env values if config file cannot be opened   Wolfgang Denk
• [U-Boot] Pull request: u-boot-arm/master   Wolfgang Denk
• [U-Boot] Password protection of U-Boot command line   Wolfgang Denk
• [U-Boot] [PATCH V13 01/12] Add cmd_spl command   Wolfgang Denk
• [U-Boot] USB support in U-boot for MX23EVK board   Wolfgang Denk
• [U-Boot] [PATCH v2] fix CFI flash driver for 8-bit bus support   Wolfgang Denk
• [U-Boot] Password protection of U-Boot command line   Wolfgang Denk
• [U-Boot] USB support in U-boot for MX23EVK board   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git (master branch)   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git (sf branch)   Wolfgang Denk
• [U-Boot] [PATCH 3/6] arm: Check for -fstack-usage support   Wolfgang Denk
• [U-Boot] [PATCH] to correct Issue with PowerPc implementation of resetting the watchdog in the decrementer exception handler   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/85xx:Add PSC9131 RDB Support   Wolfgang Denk
• [U-Boot] [PATCH] Remove execute permissions from source files   Wolfgang Denk
• [U-Boot] [PATCH 2/2] Allow newlines within command environment vars   Wolfgang Denk
• [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup   Wolfgang Denk
• [U-Boot] [PATCH 1/4 v5] Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8   Wolfgang Denk
• [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup   Wolfgang Denk
• [U-Boot] [PATCH 1/4 v5] Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8   Wolfgang Denk
• [U-Boot] [PATCH 2/2] Allow newlines within command environment vars   Wolfgang Denk
• [U-Boot] [RFC PATCH v2 0/28] Create generic board init for ARM, x86, PPC   Wolfgang Denk
• [U-Boot] Pull request: u-boot-x86   Wolfgang Denk
• [U-Boot] Please pull u-boot-staging/trini at ti.com   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-mmc   Wolfgang Denk
• [U-Boot] exports.h and the GPL   Wolfgang Denk
• [U-Boot] [RFC} [PATCH] Feature removal due to lack of custodians   Wolfgang Denk
• [U-Boot] [PATCH] AVR32 removal due to lack of custodian.   Wolfgang Denk
• [U-Boot] [RFC} [PATCH] Feature removal due to lack of custodians   Wolfgang Denk
• [U-Boot] [RFC} [PATCH] Feature removal due to lack of custodians   Wolfgang Denk
• [U-Boot] BDM4GDB   Wolfgang Denk
• [U-Boot] [i2c] Pull request   Wolfgang Denk
• [U-Boot] Pull request - microblaze   Wolfgang Denk
• [U-Boot] [PATCH v3] AVR32: fix timer_init() function   Wolfgang Denk
• [U-Boot] error compiling U-boot tools   Kopac Drago
• [U-Boot] Regarding bootscreen /splash screen   Sathishkumar Duraisamy
• [U-Boot] [PATCH] sh: Fix sh7264 clock speed and related serial setting   Phil Edworthy
• [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup   Fabio Estevam
• [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup   Fabio Estevam
• [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup   Fabio Estevam
• [U-Boot] [PATCH 1/3] mx28evk: add RTC support   Fabio Estevam
• [U-Boot] [PATCH 4/4 v3] i.MX28: Fix ref_cpu clock setup   Fabio Estevam
• [U-Boot] [PATCH] Elimintated magic numbers for scratch register addresses   Fabio Estevam
• [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL   Fabio Estevam
• [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL   Fabio Estevam
• [U-Boot] [PATCH 1/5] mx53loco: Use gpio_direction_input prior to gpio_get_value   Fabio Estevam
• [U-Boot] [PATCH 2/5] mx53ard: Use gpio_direction_input prior to gpio_get_value   Fabio Estevam
• [U-Boot] [PATCH 3/5] mx53evk: Use gpio_direction_input prior to gpio_get_value   Fabio Estevam
• [U-Boot] [PATCH 4/5] mx53smd: Use gpio_direction_input prior to gpio_get_value   Fabio Estevam
• [U-Boot] [PATCH 5/5] mx51evk: Use gpio_direction_input prior to gpio_get_value   Fabio Estevam
• [U-Boot] [PATCH 1/5] mx53loco: Use gpio_direction_input prior to gpio_get_value   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6qsabrelite: add and enable USB Host 1 support   Fabio Estevam
• [U-Boot] [PATCH 1/5] mx31pdk: Fix CONFIG_SYS_MEMTEST_END   Fabio Estevam
• [U-Boot] [PATCH 2/5] mx51evk: Fix CONFIG_SYS_MEMTEST_END   Fabio Estevam
• [U-Boot] [PATCH 3/5] mx53evk: Fix CONFIG_SYS_MEMTEST_END   Fabio Estevam
• [U-Boot] [PATCH 4/5] mx53smd: Fix CONFIG_SYS_MEMTEST_END   Fabio Estevam
• [U-Boot] [PATCH 5/5] efikamx: Fix CONFIG_SYS_MEMTEST_END   Fabio Estevam
• [U-Boot] Build u-Boot for NAND boot on i.MX53x platform   Fabio Estevam
• [U-Boot] [PATCH 1/2] mx35pdk: Remove duplicate CPU revision and reset cause information   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx35: generic: Let get_reset_cause be defined only when CONFIG_DISPLAY_CPUINFO is selected   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] mx35pdk: Remove duplicate CPU revision and reset cause information   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q   Fabio Estevam
• [U-Boot] [PATCH 1/5] mx31ads: Provide proper range for memtest   Fabio Estevam
• [U-Boot] [PATCH 2/5] mx35pdk: Provide proper range for memtest   Fabio Estevam
• [U-Boot] [PATCH 3/5] flea3: Provide proper range for memtest   Fabio Estevam
• [U-Boot] [PATCH 4/5] imx31_litekit: Provide proper range for memtest   Fabio Estevam
• [U-Boot] [PATCH 5/5] imx31_phycore: Provide proper range for memtest   Fabio Estevam
• [U-Boot] M29W256GL + WEIM in uboot   Fabio Estevam
• [U-Boot] M29W256GL + WEIM in uboot   Fabio Estevam
• [U-Boot] M29W256GL + WEIM in uboot   Fabio Estevam
• [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup   Fabio Estevam
• [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup   Fabio Estevam
• [U-Boot] ARM: Update mach-types   Fabio Estevam
• [U-Boot] [PATCH] mx31: Setup AIPS registers   Fabio Estevam
• [U-Boot] [PATCH] mx31: Setup AIPS registers   Fabio Estevam
• [U-Boot] [PATCH v2] mx31: Setup AIPS registers   Fabio Estevam
• [U-Boot] [PATCH v2] mx31: Setup AIPS registers   Fabio Estevam
• [U-Boot] [PATCH 2/4] net: fec_mxc: add PHYLIB support   Andy Fleming
• [U-Boot] 85xx custodianship   Andy Fleming
• [U-Boot] SRIO patches   Andy Fleming
• [U-Boot] powerpc/usb: fix bug of CPU halt when missing USB PHY clock   Andy Fleming
• [U-Boot] fsl_esdhc.c: eMMC 4.4 support?   Andy Fleming
• [U-Boot] U-boot running on DDR fails to detect the CFI compliant flash   Francisco
• [U-Boot] Broken ecc.size when switching between sw and hw ecc (beagleboard)   Orjan Friberg
• [U-Boot] [PATCH] post: new parallel nor flash test   Mike Frysinger
• [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects   Mike Frysinger
• [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects   Mike Frysinger
• [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects   Mike Frysinger
• [U-Boot] 85xx custodianship   Mike Frysinger
• [U-Boot] [PATCH v7 4/4] EXYNOS: SMDK5250: Add MMC SPL support   Mike Frysinger
• [U-Boot] Porting YAFFS2 to U-boot   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: bfin_nand: mark local func static   Mike Frysinger
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Mike Frysinger
• [U-Boot] [PATCH] net: sh_eth: Fix build warnings and whitespace for sh_eth   Mike Frysinger
• [U-Boot] [PATCH 1/5 v2] sandbox: add lseek helper   Mike Frysinger
• [U-Boot] [PATCH 1/5 v2.1] sandbox: add lseek helper   Mike Frysinger
• [U-Boot] [PATCH 00/28] Add link-local addressing support   Mike Frysinger
• [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface   Mike Frysinger
• [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface   Mike Frysinger
• [U-Boot] [PATCH 02/28] net: cosmetic: checkpatch compliance   Mike Frysinger
• [U-Boot] [PATCH 03/28] net: Move mv64x6x_eth_initialize() to board_eth_init()   Mike Frysinger
• [U-Boot] [PATCH 04/28] net: Make the MAC-seeded random number generator available to /net   Mike Frysinger
• [U-Boot] [PATCH 05/28] net: Move CDP out of net.c   Mike Frysinger
• [U-Boot] [PATCH 06/28] net: Move ARP out of net.c   Mike Frysinger
• [U-Boot] [PATCH 07/28] net: Move PING out of net.c   Mike Frysinger
• [U-Boot] [PATCH 07/28] net: Move PING out of net.c   Mike Frysinger
• [U-Boot] [PATCH 08/28] net: Move RARP receive logic out of net.c   Mike Frysinger
• [U-Boot] [PATCH 09/28] net: cosmetic: Un-typedef variables in net   Mike Frysinger
• [U-Boot] [PATCH 07/28] net: Move PING out of net.c   Mike Frysinger
• [U-Boot] [PATCH 14/28] net: Refactor ping recieve handler   Mike Frysinger
• [U-Boot] [PATCH 10/28] net: cosmetic: Improve variable names and code readability   Mike Frysinger
• [U-Boot] [PATCH 10/28] net: cosmetic: Improve variable names and code readability   Mike Frysinger
• [U-Boot] [PATCH 11/28] net: Refactor IP, UPD, and ICMP header writing functions   Mike Frysinger
• [U-Boot] [PATCH 12/28] net: Refactor packet length computations   Mike Frysinger
• [U-Boot] [PATCH 13/28] net: Refactor bootp packet length computations   Mike Frysinger
• [U-Boot] [PATCH 15/28] net: Refactor to call NetSendPacket() instead of calling eth_send()   Mike Frysinger
• [U-Boot] [PATCH 16/28] net: Refactor to protect access to the NetState variable   Mike Frysinger
• [U-Boot] [PATCH 17/28] net: Refactor to separate the UDP handler from the ARP handler   Mike Frysinger
• [U-Boot] [PATCH 18/28] net: Add NetUpdateEther() to handle ARP or Ping replies (VLAN or SNAP)   Mike Frysinger
• [U-Boot] [PATCH 19/28] net: Don't write the "serverip" env var if told not to in the config   Mike Frysinger
• [U-Boot] [PATCH 20/28] net: Fix compile warning if CONFIG_BOOTP_SERVERIP is not defined   Mike Frysinger
• [U-Boot] [PATCH 21/28] net: Remove unneeded static allocation for MAC address in PingSend()   Mike Frysinger
• [U-Boot] [PATCH 22/28] net: Fix net buffer initialization   Mike Frysinger
• [U-Boot] [PATCH 25/28] net: Add option CONFIG_BOOTP_CAN_FAIL   Mike Frysinger
• [U-Boot] [PATCH 26/28] net: Add link-local addressing support   Mike Frysinger
• [U-Boot] [PATCH 27/28] net: Work-around for brain-damaged Cisco routers with arp-proxy   Mike Frysinger
• [U-Boot] [PATCH 28/28] net: Allow filtering on debug traces in the net subsystem   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: fix printf warning   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: pata_bfin: fix printf warning   Mike Frysinger
• [U-Boot] [PATCH 1/2] da850evm: add support to read mac address from spi flash   Mike Frysinger
• [U-Boot] [PATCH v8 4/4] EXYNOS: SMDK5250: Add MMC SPL support   Mike Frysinger
• [U-Boot] [PATCH 00/28] Add link-local addressing support   Mike Frysinger
• [U-Boot] [PATCH 1/2] easylogo: add lzma support   Mike Frysinger
• [U-Boot] [PATCH 2/2] Blackfin: easylogo: add lzma logos   Mike Frysinger
• [U-Boot] [PATCH 2/2] Blackfin: easylogo: add lzma logos   Mike Frysinger
• [U-Boot] [PATCH v4 2/9] Rename run_command() to builtin_run_command()   Mike Frysinger
• [U-Boot] [PATCH v4 5/9] Don't include standard parser if hush is used   Mike Frysinger
• [U-Boot] [PATCH v4 6/9] Create a single cmd_call() function to handle command execution   Mike Frysinger
• [U-Boot] [PATCH v4 4/9] Stop using builtin_run_command()   Mike Frysinger
• [U-Boot] [PATCH v4 7/9] Remove interleave of non-U-Boot code in hush   Mike Frysinger
• [U-Boot] [PATCH 2/2] Blackfin: easylogo: add lzma logos   Mike Frysinger
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Mike Frysinger
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Mike Frysinger
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Mike Frysinger
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Mike Frysinger
• [U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds   Mike Frysinger
• [U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds   Mike Frysinger
• [U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds   Mike Frysinger
• [U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds   Mike Frysinger
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Mike Frysinger
• [U-Boot] [PATCH] davinci: cleanup davinci_sync_env_enetaddr() fucntion   Mike Frysinger
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Mike Frysinger
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Mike Frysinger
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Mike Frysinger
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Mike Frysinger
• [U-Boot] [PATCH 17/28] net: Refactor to separate the UDP handler from the ARP handler   Mike Frysinger
• [U-Boot] [PATCH 1/6] .gitignore: Add .su files   Mike Frysinger
• [U-Boot] [PATCH 1/3] doc: complete, typos   Mike Frysinger
• [U-Boot] [PATCH 2/3] cmd_eeprom: typo   Mike Frysinger
• [U-Boot] [PATCH 3/3] usb_ether: fix typo   Mike Frysinger
• [U-Boot] [PATCH V2] bugfix: all Marvell specific build fails due to undefined reference to `get_ticks'   Mike Frysinger
• [U-Boot] [PATCH v7 4/4] EXYNOS: SMDK5250: Add MMC SPL support   Mike Frysinger
• [U-Boot] [PATCH v2] davinci: cleanup davinci_sync_env_enetaddr() fucntion   Mike Frysinger
• [U-Boot] [Samsung] [PATCH v7 4/4] EXYNOS: SMDK5250: Add MMC SPL support   Mike Frysinger
• [U-Boot] [PATCH v2] SMDK5250: Add ethernet support   Mike Frysinger
• [U-Boot] [PATCH v2] davinci: cleanup davinci_sync_env_enetaddr() fucntion   Mike Frysinger
• [U-Boot] Does U-boot support ASLR?   Mike Frysinger
• [U-Boot] Does U-boot support ASLR?   Mike Frysinger
• [U-Boot] Does U-boot support ASLR?   Mike Frysinger
• [U-Boot] Does U-boot support ASLR?   Mike Frysinger
• [U-Boot] Does U-boot support ASLR?   Mike Frysinger
• [U-Boot] [PATCH v3] davinci: cleanup davinci_sync_env_enetaddr() fucntion   Mike Frysinger
• [U-Boot] Password protection of U-Boot command line   Mike Frysinger
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Mike Frysinger
• [U-Boot] Password protection of U-Boot command line   Mike Frysinger
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Mike Frysinger
• [U-Boot] [PATCH v2 1/2] da850evm: add support to read mac address from SPI flash   Mike Frysinger
• [U-Boot] Password protection of U-Boot command line   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git (master branch)   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git (sf branch)   Mike Frysinger
• [U-Boot] [PATCH 1/4] USB: Staticize internal functions   Mike Frysinger
• [U-Boot] [PATCH 2/4] USB: Separate out USB hub driver   Mike Frysinger
• [U-Boot] [PATCH 3/4] USB: Make struct devrequest setup_packet local   Mike Frysinger
• [U-Boot] [PATCH 4/4] USB: Staticize usb_storage.c   Mike Frysinger
• [U-Boot] [PATCH v2 3/6] config.mk: Check for -fstack-usage support   Mike Frysinger
• [U-Boot] [PATCH v2 4/6] spl.c: Use __noreturn decorator   Mike Frysinger
• [U-Boot] [PATCH v2 5/6] README: Add more SPL config options   Mike Frysinger
• [U-Boot] [PATCH v2 2/6] config.mk: Make cc-option create a file under include/generated   Mike Frysinger
• [U-Boot] [PATCH] Remove execute permissions from source files   Mike Frysinger
• [U-Boot] [PATCH 26/28] net: Add link-local addressing support   Mike Frysinger
• [U-Boot] [PATCH 04/28] net: Make the MAC-seeded random number generator available to /net   Mike Frysinger
• [U-Boot] [PATCH 07/28] net: Move PING out of net.c   Mike Frysinger
• [U-Boot] [PATCH] EXYNOS: SMDK5250: Support all 4 UARTs   Mike Frysinger
• [U-Boot] [PATCH 09/14] New command clear: Clear the ANSI terminal   Mike Frysinger
• [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR   Mike Frysinger
• [U-Boot] [PATCH 13/14] New command bootmenu: ANSI terminal Boot Menu support   Mike Frysinger
• [U-Boot] [PATCH 10/14] New config variable CONFIG_MENUCMD   Mike Frysinger
• [U-Boot] [PATCH] Remove execute permissions from source files   Mike Frysinger
• [U-Boot] [PATCH v3 6/6] SPL: Add README.omap3   Mike Frysinger
• [U-Boot] [PATCH] net: sh_eth: Fix build warnings and whitespace for sh_eth   Mike Frysinger
• [U-Boot] sh: build warnings in clock code   Mike Frysinger
• [U-Boot] [PATCH v3 7/8] sandbox: Add flags for open() call   Mike Frysinger
• [U-Boot] [PATCH] lmb: do not export anything without CONFIG_LMB   Mike Frysinger
• [U-Boot] [PATCH v4 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL   Mike Frysinger
• [U-Boot] [PATCH v4 2/8] sandbox: config: Enable fdt and snprintf() options   Mike Frysinger
• [U-Boot] [PATCH v4 7/8] sandbox: Add flags for open() call   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: gd_t: relocate volatile markings   Mike Frysinger
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Mike Frysinger
• [U-Boot] [PATCH] usb: align buffers at cache boundary   Mike Frysinger
• [U-Boot] [PATCH 1/3 v2] common: add possibility for readline_into_buffer timeout   Mike Frysinger
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Mike Frysinger
• [U-Boot] error compiling U-boot tools   Mike Frysinger
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Mike Frysinger
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Mike Frysinger
• [U-Boot] [PATCH v5 7/9] sandbox: Add flags for open() call   Mike Frysinger
• [U-Boot] [PATCH] sandbox: add get_{tbclk,ticks}   Mike Frysinger
• [U-Boot] [PATCH 1/5 v2.2] sandbox: add lseek helper   Mike Frysinger
• [U-Boot] [PATCH v2 2/8] sandbox: config: Enable fdt and snprintf() options   Mike Frysinger
• [U-Boot] [PATCH v4 3/8] sandbox: gpio: Add basic driver for simulating GPIOs   Mike Frysinger
• [U-Boot] [PATCH v2 2/8] sandbox: config: Enable fdt and snprintf() options   Mike Frysinger
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Mike Frysinger
• [U-Boot] [PATCH] WIP: fdt: Add serial port controlled by device tree   Mike Frysinger
• [U-Boot] [PATCH v4 3/8] sandbox: gpio: Add basic driver for simulating GPIOs   Mike Frysinger
• [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Mike Frysinger
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Mike Frysinger
• [U-Boot] [PATCH v4 3/8] sandbox: gpio: Add basic driver for simulating GPIOs   Mike Frysinger
• [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734   Mike Frysinger
• [U-Boot] [PATCH v5] sandbox: gpio: Add basic driver for simulating GPIOs   Mike Frysinger
• [U-Boot] [PATCH] net: sh_eth: Fix build warnings and whitespace for sh_eth   Mike Frysinger
• [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Mike Frysinger
• [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734   Mike Frysinger
• [U-Boot] PR1-Appliance UART Boot Issue   Mike Frysinger
• [U-Boot] [PATCH v5] sandbox: gpio: Add basic driver for simulating GPIOs   Mike Frysinger
• [U-Boot] PR1-Appliance UART Boot Issue   Mike Frysinger
• [U-Boot] [PATCH 1/2] openrisc/bitops: add hweightX defines   Mike Frysinger
• [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build   Mike Frysinger
• [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux   Mike Frysinger
• [U-Boot] [PATCH v3 2/6] armv7: add appropriate headers for assembly functions   Mike Frysinger
• [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__))   Mike Frysinger
• [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__))   Mike Frysinger
• [U-Boot] [PATCH v3 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2   Mike Frysinger
• [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux   Mike Frysinger
• [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build   Mike Frysinger
• [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build   Mike Frysinger
• [U-Boot] [PATCH 1/2] usb: align buffers at cacheline   Mike Frysinger
• [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux   Mike Frysinger
• [U-Boot] [PATCH 1/1] nios2 - adjust gbl data off to account for bd_info   Mike Frysinger
• [U-Boot] exports.h and the GPL   Mike Frysinger
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Mike Frysinger
• [U-Boot] exports.h and the GPL   Mike Frysinger
• [U-Boot] [PATCH] sandbox: tweak style in linker script   Mike Frysinger
• [U-Boot] [PATCH] sandbox: disable fortification   Mike Frysinger
• [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing   Mike Frysinger
• [U-Boot] [PATCH 1/3] sandbox: add concept of sandbox state   Mike Frysinger
• [U-Boot] [PATCH 2/3] sandbox: allow processing before main loop   Mike Frysinger
• [U-Boot] [PATCH 3/3] sandbox: add getopt support   Mike Frysinger
• [U-Boot] [PATCH] sandbox: mark os_exit as noreturn   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: fix printf warning   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: fix printf warning   Mike Frysinger
• [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing   Mike Frysinger
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Mike Frysinger
• [U-Boot] [PATCH 3/3] sandbox: add getopt support   Mike Frysinger
• [U-Boot] [PATCH 05/15] common/main.c: Fix function readline   Mike Frysinger
• [U-Boot] [PATCH 3/3] sandbox: add getopt support   Mike Frysinger
• [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing   Mike Frysinger
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Mike Frysinger
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Mike Frysinger
• [U-Boot] [PATCH v2 2/2] usb: Add CONFIG to fetch string descriptor   Mike Frysinger
• [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing   Mike Frysinger
• [U-Boot] [PATCH 05/15] common/main.c: Fix function readline   Mike Frysinger
• [U-Boot] [PATCH 04/14] Fix function readline in main.c   Mike Frysinger
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Mike Frysinger
• [U-Boot] [RFC} [PATCH] Feature removal due to lack of custodians   Mike Frysinger
• [U-Boot] [PATCH] Avoid using GNU basename   Mike Frysinger
• [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc   Mike Frysinger
• [U-Boot] Nand dump and nand bad block disagree   Mike Frysinger
• [U-Boot] [PATCH 1/7] net/designware: Fix to restore hw mac address   Mike Frysinger
• [U-Boot] [PATCH 5/7] net/designware: Try configuring phy on each dw_eth_init   Mike Frysinger
• [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc   Mike Frysinger
• [U-Boot] Nand dump and nand bad block disagree   Mike Frysinger
• [U-Boot] Nand dump and nand bad block disagree   Mike Frysinger
• [U-Boot] mx28: booting u-boot via USB   Matthias Fuchs
• [U-Boot] mx28: booting u-boot via USB   Matthias Fuchs
• [U-Boot] [PATCH] mx28: fix SPL code to make USB booting work   Matthias Fuchs
• [U-Boot] [PATCH] mx28: fix SPL code to make USB booting work   Matthias Fuchs
• [U-Boot] [PATCH V2] mx28: fix SPL code to make USB booting work   Matthias Fuchs
• [U-Boot] [PATCH V2] mx28: fix SPL code to make USB booting work   Matthias Fuchs
• [U-Boot] [PATCH V3] mx28: fix SPL code to make USB booting work   Matthias Fuchs
• [U-Boot] [PATCH 4/4] Added NAND flash pin configuration   Matthias Fuchs
• [U-Boot] [PATCH 4/4] Added NAND flash pin configuration   Matthias Fuchs
• [U-Boot] [PATCH 0/2] i.mx28: Elimintated magic numbers for scratch register addresses   Matthias Fuchs
• [U-Boot] [PATCH 0/2] i.mx28: Elimintated magic numbers for scratch register addresses   Matthias Fuchs
• [U-Boot] usb ethernet working on panda?   Kumar Gala
• [U-Boot] SRIO patches   Liu Gang
• [U-Boot] [PATCH v5 0/7] Change ARM926EJ-S startup code, hawkboard and calimain   Sughosh Ganu
• [U-Boot] [PATCH 1/3] davinci: move clock related functions to new file   Sughosh Ganu
• [U-Boot] [STATUS] [ARM]   Sughosh Ganu
• [U-Boot] [STATUS] [ARM]   Sughosh Ganu
• [U-Boot] [PATCH v4 09/13] hawkboard: Modify to work with generic relocation   Sughosh Ganu
• [U-Boot] [PATCH v4 09/13] hawkboard: Modify to work with generic relocation   Sughosh Ganu
• [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata   Sughosh Ganu
• [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata   Sughosh Ganu
• [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata   Sughosh Ganu
• [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata   Sughosh Ganu
• [U-Boot] [PATCH 1/5 v2] sandbox: add lseek helper   Simon Glass
• [U-Boot] [PATCH v5 08/18] tegra: fdt: Add additional USB binding   Simon Glass
• [U-Boot] [PATCH v5 10/18] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
• [U-Boot] [PATCH v5 18/18] tegra: fdt: Enable FDT support for Seaboard   Simon Glass
• [U-Boot] [PATCH v6 10/18] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
• [U-Boot] [PATCH v6 11/18] tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard   Simon Glass
• [U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script   Simon Glass
• [U-Boot] [PATCH v6 10/18] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
• [U-Boot] [PATCH 4/7] tegra: Add I2C driver   Simon Glass
• [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard   Simon Glass
• [U-Boot] [PATCH v2 4/7] tegra: Add I2C driver   Simon Glass
• [U-Boot] [PATCH v2 3/7] tegra: fdt: Add extra I2C bindings for U-Boot   Simon Glass
• [U-Boot] [PATCH v2 18/20] tegra: i2c: Add function to find DVC bus   Simon Glass
• [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard   Simon Glass
• [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard   Simon Glass
• [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard   Simon Glass
• [U-Boot] [PATCH v3 0/9] tegra: Add I2C driver and associated parts   Simon Glass
• [U-Boot] [PATCH v3 1/9] tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE   Simon Glass
• [U-Boot] [PATCH v3 2/9] fdt: Add function to allow aliases to refer to multiple nodes   Simon Glass
• [U-Boot] [PATCH v3 3/9] tegra: Enhance clock support to handle 16-bit clock divisors   Simon Glass
• [U-Boot] [PATCH v3 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot   Simon Glass
• [U-Boot] [PATCH v3 5/9] tegra: i2c: Add I2C driver   Simon Glass
• [U-Boot] [PATCH v3 6/9] tegra: i2c: Initialise I2C on Nvidia boards   Simon Glass
• [U-Boot] [PATCH v3 7/9] tegra: i2c: Select I2C ordering for Seaboard   Simon Glass
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Select number of controllers for Tegra2 boards   Simon Glass
• [U-Boot] [PATCH v3 9/9] tegra: i2c: Enable I2C on Seaboard   Simon Glass
• [U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script   Simon Glass
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Simon Glass
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Simon Glass
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Simon Glass
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Simon Glass
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Simon Glass
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Simon Glass
• [U-Boot] hush saveenv problem   Simon Glass
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Simon Glass
• [U-Boot] [PATCH v2] SMDK5250: Add ethernet support   Simon Glass
• [U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high   Simon Glass
• [U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high   Simon Glass
• [U-Boot] [PATCH v2 4/7] tegra: Add I2C driver   Simon Glass
• [U-Boot] [PATCH v2] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Simon Glass
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Simon Glass
• [U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high   Simon Glass
• [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement   Simon Glass
• [U-Boot] [PATCH v4 12/15] bootstage: Replace show_boot_progress/error() with bootstage_...()   Simon Glass
• [U-Boot] [PATCH v4 13/15] bootstage: Implement core microsecond boot time measurement   Simon Glass
• [U-Boot] [PATCH v4 15/15] bootstage: arm: Add bootstage calls in board and bootm   Simon Glass
• [U-Boot] [PATCH v4 2/9] Rename run_command() to builtin_run_command()   Simon Glass
• [U-Boot] [PATCH v4 5/9] Don't include standard parser if hush is used   Simon Glass
• [U-Boot] [PATCH v4 6/9] Create a single cmd_call() function to handle command execution   Simon Glass
• [U-Boot] [PATCH v4 4/9] Stop using builtin_run_command()   Simon Glass
• [U-Boot] [PATCH v4 4/9] Stop using builtin_run_command()   Simon Glass
• [U-Boot] [PATCH v5 0/9] Unified command execution in one place   Simon Glass
• [U-Boot] [PATCH v5 1/9] Remove CMD_PXE's static on run_command()   Simon Glass
• [U-Boot] [PATCH v5 2/9] Rename run_command() to builtin_run_command()   Simon Glass
• [U-Boot] [PATCH v5 3/9] Rename run_command2() to run_command()   Simon Glass
• [U-Boot] [PATCH v5 4/9] Stop using builtin_run_command()   Simon Glass
• [U-Boot] [PATCH v5 5/9] Don't include standard parser if hush is used   Simon Glass
• [U-Boot] [PATCH v5 6/9] Create a single cmd_call() function to handle command execution   Simon Glass
• [U-Boot] [PATCH v5 7/9] Remove interleave of non-U-Boot code in hush   Simon Glass
• [U-Boot] [PATCH v5 8/9] Add cmd_process() to process commands in one place   Simon Glass
• [U-Boot] [PATCH v5 9/9] Convert cmd_usage() calls in common to use a return value   Simon Glass
• [U-Boot] [PATCH v4 4/9] Stop using builtin_run_command()   Simon Glass
• [U-Boot] [PATCH 1/2] Add run_command_list() to run a list of commands   Simon Glass
• [U-Boot] [PATCH 2/2] Allow newlines within command environment vars   Simon Glass
• [U-Boot] [PATCH v2 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL   Simon Glass
• [U-Boot] [PATCH v2 2/8] sandbox: config: Enable fdt and snprintf() options   Simon Glass
• [U-Boot] [PATCH 1/5 v2.1] sandbox: add lseek helper   Simon Glass
• [U-Boot] [PATCH 2/2] Allow newlines within command environment vars   Simon Glass
• [U-Boot] [PATCH v4 4/9] Stop using builtin_run_command()   Simon Glass
• [U-Boot] [PATCH 1/2] Add run_command_list() to run a list of commands   Simon Glass
• [U-Boot] [PATCH v2 3/8] sandbox: gpio: Add basic driver for simulating GPIOs   Simon Glass
• [U-Boot] [PATCH v3 5/8] sandbox: Add concept of sandbox state   Simon Glass
• [U-Boot] [PATCH v3 7/8] sandbox: Add flags for open() call   Simon Glass
• [U-Boot] [PATCH v4 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL   Simon Glass
• [U-Boot] [PATCH v4 2/8] sandbox: config: Enable fdt and snprintf() options   Simon Glass
• [U-Boot] [PATCH v4 3/8] sandbox: gpio: Add basic driver for simulating GPIOs   Simon Glass
• [U-Boot] [PATCH v4 4/8] sandbox: Enable GPIO driver   Simon Glass
• [U-Boot] [PATCH v4 5/8] sandbox: Add concept of sandbox state   Simon Glass
• [U-Boot] [PATCH v4 6/8] sandbox: Allow processing instead of or before main loop   Simon Glass
• [U-Boot] [PATCH v4 7/8] sandbox: Add flags for open() call   Simon Glass
• [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing   Simon Glass
• [U-Boot] [PATCH 1/2] Add run_command_list() to run a list of commands   Simon Glass
• [U-Boot] [PATCH 2/2] Allow newlines within command environment vars   Simon Glass
• [U-Boot] [RFC PATCH v2 0/28] Create generic board init for ARM, x86, PPC   Simon Glass
• [U-Boot] [RFC PATCH v2 03/28] arm: Only display frame buffer info if there is LCD/video support   Simon Glass
• [U-Boot] [RFC PATCH v2 0/28] Create generic board init for ARM, x86, PPC   Simon Glass
• [U-Boot] [PATCH v3 0/28] Create generic board init for ARM, x86, PPC   Simon Glass
• [U-Boot] [PATCH v3 01/28] arm: Change board baud_rate to ulong   Simon Glass
• [U-Boot] [PATCH v3 02/28] x86: Change board baud_rate to ulong   Simon Glass
• [U-Boot] [PATCH v3 03/28] arm: Only display frame buffer info if there is LCD/video support   Simon Glass
• [U-Boot] [PATCH v3 04/28] x86: Remove compiler warning in sc520_timer.c   Simon Glass
• [U-Boot] [PATCH v3 05/28] x86: Remove dead code in eNET   Simon Glass
• [U-Boot] [PATCH v3 06/28] x86: Add initial memory barrier macros   Simon Glass
• [U-Boot] [PATCH v3 07/28] ppc: Add initial memory barrier macros   Simon Glass
• [U-Boot] [PATCH v3 08/28] Introduce generic global_data   Simon Glass
• [U-Boot] [PATCH v3 09/28] Introduce generic u-boot.h file   Simon Glass
• [U-Boot] [PATCH v3 10/28] Introduce generic link symbol file   Simon Glass
• [U-Boot] [PATCH v3 11/28] arm: Use sections header to obtain link symbols   Simon Glass
• [U-Boot] [PATCH v3 12/28] x86: Change stub example to use asm-generic/sections.h   Simon Glass
• [U-Boot] [PATCH v3 13/28] Introduce a basic initcall implementation   Simon Glass
• [U-Boot] [PATCH v3 14/28] Define CONFIG_SYS_LEGACY_BOARD everywhere   Simon Glass
• [U-Boot] [PATCH v3 15/28] Introduce generic pre-relocation board_f.c   Simon Glass
• [U-Boot] [PATCH v3 16/28] Introduce generic post-relocation board_r.c   Simon Glass
• [U-Boot] [PATCH v3 17/28] Add spl load feature   Simon Glass
• [U-Boot] [PATCH v3 18/28] arm: Enable generic board support   Simon Glass
• [U-Boot] [PATCH v3 19/28] Add CONFIG_SYS_SYM_OFFSETS to support offset symbols   Simon Glass
• [U-Boot] [PATCH v3 20/28] x86: Use sections header to obtain link symbols   Simon Glass
• [U-Boot] [PATCH v3 21/28] Add x86 fields to generic global_data   Simon Glass
• [U-Boot] [PATCH v3 22/28] x86: Enable generic board support   Simon Glass
• [U-Boot] [PATCH v3 23/28] Add ppc fields to generic global data   Simon Glass
• [U-Boot] [PATCH v3 24/28] Adjust board_f for ppc   Simon Glass
• [U-Boot] [PATCH v3 25/28] Adjust board_r.c for PowerPC   Simon Glass
• [U-Boot] [PATCH v3 26/28] ppc: Enable generic board board   Simon Glass
• [U-Boot] [PATCH v3 27/28] tegra: Mark board init files for ARMv4t   Simon Glass
• [U-Boot] [PATCH v3 28/28] tegra: Enable generic board for Seaboard.   Simon Glass
• [U-Boot] [PATCH v4 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL   Simon Glass
• [U-Boot] [PATCH] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load   Simon Glass
• [U-Boot] [PATCH v4 04/20] arm: fdt: Ensure that an embedded fdt is word-aligned   Simon Glass
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Simon Glass
• [U-Boot] [PATCH v4 04/20] arm: fdt: Ensure that an embedded fdt is word-aligned   Simon Glass
• [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Simon Glass
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Simon Glass
• [U-Boot] [PATCH v3 0/6] Introduce generic relocation feature   Simon Glass
• [U-Boot] [PATCH] Revert "ARM: I2C: I2C Multi byte address support"   Simon Glass
• [U-Boot] [PATCH] Revert "ARM: I2C: I2C Multi byte address support"   Simon Glass
• [U-Boot] [PATCH v4 0/13] Introduce generic relocation feature   Simon Glass
• [U-Boot] [PATCH v4 01/13] Define CONFIG_SYS_SKIP_RELOC for all archs   Simon Glass
• [U-Boot] [PATCH v4 02/13] Add generic relocation feature   Simon Glass
• [U-Boot] [PATCH v4 03/13] arm: Export and promote relocation symbols   Simon Glass
• [U-Boot] [PATCH v4 04/13] arm: Add start_call_board_init_r() to each start.S   Simon Glass
• [U-Boot] [PATCH v4 05/13] Move memcpy(), memset() into new lib/membasic.c   Simon Glass
• [U-Boot] [PATCH v4 06/13] arm: Add explicit __image_copy_end symbol for ARM926EJ-S   Simon Glass
• [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata   Simon Glass
• [U-Boot] [PATCH v4 08/13] tx25: Modify to work with generic relocation   Simon Glass
• [U-Boot] [PATCH v4 09/13] hawkboard: Modify to work with generic relocation   Simon Glass
• [U-Boot] [PATCH v4 10/13] mx31pdk: Modify to work with generic relocation   Simon Glass
• [U-Boot] [PATCH v4 11/13] smdk6400: Modify to work with generic relocation   Simon Glass
• [U-Boot] [PATCH v4 12/13] arm: Move over to generic relocation   Simon Glass
• [U-Boot] [PATCH v4 13/13] arm: Remove unused code in start.S   Simon Glass
• [U-Boot] [PATCH v2 0/7] Tidy up ARM link scripts   Simon Glass
• [U-Boot] [PATCH v2 6/7] arm: add a common .lds link script   Simon Glass
• [U-Boot] [PATCH v4 7/8] sandbox: Add flags for open() call   Simon Glass
• [U-Boot] [PATCH v5 7/9] sandbox: Add flags for open() call   Simon Glass
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Simon Glass
• [U-Boot] [PATCH v2 2/8] sandbox: config: Enable fdt and snprintf() options   Simon Glass
• [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script   Simon Glass
• [U-Boot] [PATCH v3 7/7] arm: Use common .lds file where possible   Simon Glass
• [U-Boot] [PATCH v4 3/8] sandbox: gpio: Add basic driver for simulating GPIOs   Simon Glass
• [U-Boot] [PATCH] WIP: fdt: Add serial port controlled by device tree   Simon Glass
• [U-Boot] serial : Device tree support for multiple serial devices.   Simon Glass
• [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script   Simon Glass
• [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Simon Glass
• [U-Boot] [PATCH v4 04/13] arm: Add start_call_board_init_r() to each start.S   Simon Glass
• [U-Boot] [PATCH v4 02/13] Add generic relocation feature   Simon Glass
• [U-Boot] [PATCH v4 0/13] Introduce generic relocation feature   Simon Glass
• [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script   Simon Glass
• [U-Boot] [PATCH v4 0/13] Introduce generic relocation feature   Simon Glass
• [U-Boot] [PATCH v4 3/8] sandbox: gpio: Add basic driver for simulating GPIOs   Simon Glass
• [U-Boot] [PATCH v4 3/8] sandbox: gpio: Add basic driver for simulating GPIOs   Simon Glass
• [U-Boot] [PATCH v5] sandbox: gpio: Add basic driver for simulating GPIOs   Simon Glass
• [U-Boot] [PATCH v5 03/14] Add generic relocation feature   Simon Glass
• [U-Boot] [PATCH v5 05/14] arm: Add pivot_to_board_init_r() to each start.S   Simon Glass
• [U-Boot] [PATCH v4 04/13] arm: Add start_call_board_init_r() to each start.S   Simon Glass
• [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script   Simon Glass
• [U-Boot] [PATCH v4 6/7] arm: add a common .lds link script   Simon Glass
• [U-Boot] [PATCH 1/2] usb: align buffers at cacheline   Simon Glass
• [U-Boot] [PATCH v2] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load   Simon Glass
• [U-Boot] [RFC} [PATCH] Feature removal due to lack of custodians   Simon Glass
• [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata   Simon Glass
• [U-Boot] [PATCH v4 09/13] hawkboard: Modify to work with generic relocation   Simon Glass
• [U-Boot] [PATCH 2/3] sandbox: allow processing before main loop   Simon Glass
• [U-Boot] [PATCH 1/3] sandbox: add concept of sandbox state   Simon Glass
• [U-Boot] [PATCH 3/3] sandbox: add getopt support   Simon Glass
• [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing   Simon Glass
• [U-Boot] [PATCH v3 0/16] tegra: Add fdt definitions and USB driver   Simon Glass
• [U-Boot] [PATCH] sandbox: tweak style in linker script   Simon Glass
• [U-Boot] [PATCH] sandbox: disable fortification   Simon Glass
• [U-Boot] [PATCH v5 0/18] tegra: Add fdt definitions and USB driver   Simon Glass
• [U-Boot] [PATCH 3/3] sandbox: add getopt support   Simon Glass
• [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing   Simon Glass
• [U-Boot] [PATCH 3/3] sandbox: add getopt support   Simon Glass
• [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing   Simon Glass
• [U-Boot] [PATCH v2 1/2] usb: align buffers at cacheline   Simon Glass
• [U-Boot] [PATCH v2 1/2] usb: align buffers at cacheline   Simon Glass
• [U-Boot] [PATCH v4 04/20] arm: fdt: Ensure that an embedded fdt is word-aligned   Simon Glass
• [U-Boot] [PATCH v5 0/18] tegra: Add fdt definitions and USB driver   Simon Glass
• [U-Boot] [PATCH v6 0/20] tegra: Add fdt definitions and USB driver   Simon Glass
• [U-Boot] [PATCH v6 01/20] fdt: Tidy up a few fdtdec problems   Simon Glass
• [U-Boot] [PATCH v6 02/20] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• [U-Boot] [PATCH v6 03/20] fdt: Add basic support for decoding GPIO definitions   Simon Glass
• [U-Boot] [PATCH v6 04/20] arm: fdt: Add skeleton device tree file from kernel   Simon Glass
• [U-Boot] [PATCH v6 05/20] tegra: fdt: Add Tegra2x device tree file from kernel   Simon Glass
• [U-Boot] [PATCH v6 06/20] tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel   Simon Glass
• [U-Boot] [PATCH v6 07/20] fdt: Add staging area for device tree binding documentation   Simon Glass
• [U-Boot] [PATCH v6 08/20] fdt: Add tegra-usb bindings file from linux   Simon Glass
• [U-Boot] [PATCH v6 09/20] tegra: fdt: Add additional USB binding   Simon Glass
• [U-Boot] [PATCH v6 10/20] tegra: fdt: Add clock bindings   Simon Glass
• [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard   Simon Glass
• [U-Boot] [PATCH v6 12/20] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
• [U-Boot] [PATCH v6 13/20] tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard   Simon Glass
• [U-Boot] [PATCH v6 14/20] usb: Add support for txfifo threshold   Simon Glass
• [U-Boot] [PATCH v6 15/20] tegra: fdt: Add function to return peripheral/clock ID   Simon Glass
• [U-Boot] [PATCH v6 16/20] tegra: usb: Add support for Tegra USB peripheral   Simon Glass
• [U-Boot] [PATCH v6 17/20] tegra: usb: Add USB support to nvidia boards   Simon Glass
• [U-Boot] [PATCH v6 18/20] tegra: usb: Add common USB defines for tegra2 boards   Simon Glass
• [U-Boot] [PATCH v6 19/20] tegra: usb: Enable USB on Seaboard   Simon Glass
• [U-Boot] [PATCH v6 20/20] tegra: fdt: Enable FDT support for Seaboard   Simon Glass
• [U-Boot] [PATCH v4 8/8] sandbox: Add basic command line parsing   Simon Glass
• [U-Boot] [PATCH v5 0/18] tegra: Add fdt definitions and USB driver   Simon Glass
• [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard   Simon Glass
• [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard   Simon Glass
• [U-Boot] [PATCH v6 15/20] tegra: fdt: Add function to return peripheral/clock ID   Simon Glass
• [U-Boot] [PATCH v7 09/20] tegra: fdt: Add additional USB binding   Simon Glass
• [U-Boot] [PATCH v7 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard   Simon Glass
• [U-Boot] [PATCH v7 15/20] tegra: fdt: Add function to return peripheral/clock ID   Simon Glass
• [U-Boot] [PATCH v6 0/20] tegra: Add fdt definitions and USB driver   Simon Glass
• [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard   Simon Glass
• [U-Boot] [PATCH v6 15/20] tegra: fdt: Add function to return peripheral/clock ID   Simon Glass
• [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard   Simon Glass
• [U-Boot] [PATCH v7 09/20] tegra: fdt: Add additional USB binding   Simon Glass
• [U-Boot] [PATCH v7 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard   Simon Glass
• [U-Boot] [PATCH v6 15/20] tegra: fdt: Add function to return peripheral/clock ID   Simon Glass
• [U-Boot] [PATCH v4 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot   Simon Glass
• [U-Boot] [PATCH v4 5/9] tegra: i2c: Add I2C driver   Simon Glass
• [U-Boot] [PATCH v4 7/9] tegra: i2c: Select I2C ordering for Seaboard   Simon Glass
• [U-Boot] [PATCH v6 0/20] tegra: Add fdt definitions and USB driver   Simon Glass
• [U-Boot] [PATCH v4 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot   Simon Glass
• [U-Boot] [PATCH 1/2] at91: modified NAND flash timing on meesc board   Daniel Gorsulowski
• [U-Boot] MPC8313 DDR2 configuration   Paul Gortmaker
• [U-Boot] [PATCH] AVR32 removal due to lack of custodian.   Paul Gortmaker
• [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Govindraj
• [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Govindraj
• [U-Boot] [PATCH v3 6/7] usb: ulpi: Extend the existing ulpi framework.   Govindraj
• [U-Boot] [PATCH v3 3/7] OMAP3+: Clock: Adding ehci clock enabling   Govindraj
• [U-Boot] [PATCH] OMAP3: TAM3517: update ehci interface   Govindraj
• [U-Boot] [PATCH v4 4/7] ehci-omap: Clean up added ehci-omap.c   Govindraj
• [U-Boot] [PATCH v3 6/7] usb: ulpi: Extend the existing ulpi framework.   Govindraj
• [U-Boot] OMAP USB, beagle-xm fail   Govindraj
• [U-Boot] [PATCH v2 0/4] Clean up ehci-omap and extend support for omap3/4 socs   Govindraj
• [U-Boot] usb ethernet working on panda?   Govindraj
• [U-Boot] [PATCH v3 0/7] Clean up ehci-omap and extend support for omap3/4 socs   Govindraj.R
• [U-Boot] [PATCH v3 1/7] ehci-omap: driver for EHCI host on OMAP3   Govindraj.R
• [U-Boot] [PATCH v3 2/7] ehci-omap: Clean up added ehci-omap.c   Govindraj.R
• [U-Boot] [PATCH v3 3/7] OMAP3+: Clock: Adding ehci clock enabling   Govindraj.R
• [U-Boot] [PATCH v3 4/7] OMAP4: clock-common: Move the usb dppl configuration to new func   Govindraj.R
• [U-Boot] [PATCH v3 5/7] OMAP3+: ehci-omap: enable usb host ports for beagle/panda   Govindraj.R
• [U-Boot] [PATCH v3 6/7] usb: ulpi: Extend the existing ulpi framework.   Govindraj.R
• [U-Boot] [PATCH v3 7/7] usb: ulpi: Add omap-ulpi-view port support   Govindraj.R
• [U-Boot] [PATCH v4 0/7] Add and Clean up ehci-omap and extend support for omap3/4 socs   Govindraj.R
• [U-Boot] [PATCH v4 1/7] usb: ulpi: Extend the existing ulpi framework.   Govindraj.R
• [U-Boot] [PATCH v4 2/7] usb: ulpi: Add omap-ulpi-view port support   Govindraj.R
• [U-Boot] [PATCH v4 3/7] ehci-omap: driver for EHCI host on OMAP3   Govindraj.R
• [U-Boot] [PATCH v4 4/7] ehci-omap: Clean up added ehci-omap.c   Govindraj.R
• [U-Boot] [PATCH v4 5/7] OMAP3+: Clock: Adding ehci clock enabling   Govindraj.R
• [U-Boot] [PATCH v4 6/7] OMAP4: clock-common: Move the usb dppl configuration to new func   Govindraj.R
• [U-Boot] [PATCH v4 7/7] OMAP4: ehci-omap: enable ehci-omap for panda boards   Govindraj.R
• [U-Boot] [PATCH 0/2] usb/mx6q: USB EHCI support for MX6Q boards   Wolfgang Grandegger
• [U-Boot] [PATCH 1/2] usb/ehci: Add USB support for the MX6Q   Wolfgang Grandegger
• [U-Boot] [PATCH 2/2] mx6qsabrelite: add and enable USB Host 1 support   Wolfgang Grandegger
• [U-Boot] [PATCH 2/2] mx6qsabrelite: add and enable USB Host 1 support   Wolfgang Grandegger
• [U-Boot] [PATCH v2 0/2] usb/mx6q: USB EHCI support for MX6Q boards   Wolfgang Grandegger
• [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q   Wolfgang Grandegger
• [U-Boot] [PATCH v2 2/2] mx6qsabrelite: add and enable USB Host 1 support   Wolfgang Grandegger
• [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q   Wolfgang Grandegger
• [U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs   Wolfgang Grandegger
• [U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs   Wolfgang Grandegger
• [U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs   Wolfgang Grandegger
• [U-Boot] [PATCH] USB: relax usbcore reset timings   Wolfgang Grandegger
• [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Igor Grinberg
• [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Igor Grinberg
• [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Igor Grinberg
• [U-Boot] [PATCH v3 6/7] usb: ulpi: Extend the existing ulpi framework.   Igor Grinberg
• [U-Boot] [PATCH v3 7/7] usb: ulpi: Add omap-ulpi-view port support   Igor Grinberg
• [U-Boot] [PATCH v3 6/7] usb: ulpi: Extend the existing ulpi framework.   Igor Grinberg
• [U-Boot] [PATCH v3 2/7] ehci-omap: Clean up added ehci-omap.c   Igor Grinberg
• [U-Boot] [PATCH v3 3/7] OMAP3+: Clock: Adding ehci clock enabling   Igor Grinberg
• [U-Boot] [PATCH v3 5/7] OMAP3+: ehci-omap: enable usb host ports for beagle/panda   Igor Grinberg
• [U-Boot] [PATCH v3 3/7] OMAP3+: Clock: Adding ehci clock enabling   Igor Grinberg
• [U-Boot] [PATCH V7] mcx: support for HTKW mcx board   Igor Grinberg
• [U-Boot] [PATCH] OMAP3: TAM3517: update ehci interface   Igor Grinberg
• [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number   Igor Grinberg
• [U-Boot] [PATCH V8] mcx: support for HTKW mcx board   Igor Grinberg
• [U-Boot] [PATCH V2] OMAP3: TAM3517: update ehci interface   Igor Grinberg
• [U-Boot] [PATCH V5] ARM: omap3: Added Teejet mt_ventoux   Igor Grinberg
• [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number   Igor Grinberg
• [U-Boot] [PATCH] ARM: omap3: temporary disable USB on TAM3517 boards   Igor Grinberg
• [U-Boot] [PATCH] [OMAP3] Pass timings structure pointer to board_get_mem_timings()   Igor Grinberg
• [U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high   Shawn Guo
• [U-Boot] Craneboard with Uboot and xloader   Mohamed HAMZAOUI
• [U-Boot] Craneboard with Uboot and xloader   Mohamed HAMZAOUI
• [U-Boot] Craneboard with Uboot and xloader   Mohamed HAMZAOUI
• [U-Boot] Craneboard with Uboot and xloader   Mohamed HAMZAOUI
• [U-Boot] Craneboard with Uboot and xloader   Mohamed HAMZAOUI
• [U-Boot] Craneboard with Uboot and xloader   Mohamed HAMZAOUI
• [U-Boot] [PATCH 0/2] da850evm: add board specific functions   Manjunath Hadli
• [U-Boot] [PATCH 1/2] da850evm: add support to read mac address from spi flash   Manjunath Hadli
• [U-Boot] [PATCH 2/2] da850evm: read mac address from I2C EEPROM on AM18x EVM   Manjunath Hadli
• [U-Boot] [PATCH 0/3] addition of clocks command for davinci   Manjunath Hadli
• [U-Boot] [PATCH 1/3] davinci: move clock related functions to new file   Manjunath Hadli
• [U-Boot] [PATCH 2/3] davinci: remove macro CONFIG_DISPLAY_CPUINFO   Manjunath Hadli
• [U-Boot] [PATCH 3/3] davinci: add clocks command   Manjunath Hadli
• [U-Boot] [PATCH 3/3] davinci: add clocks command   Hadli, Manjunath
• [U-Boot] [PATCH 2/2] da850evm: read mac address from I2C EEPROM on AM18x EVM   Hadli, Manjunath
• [U-Boot] [PATCH 0/2] da850evm: add board specific functions   Hadli, Manjunath
• [U-Boot] [PATCH] davinci: cleanup davinci_sync_env_enetaddr() fucntion   Manjunath Hadli
• [U-Boot] [PATCH v2 0/2] add support for printing of clock information as part of 'bdinfo' command   Manjunath Hadli
• [U-Boot] [PATCH v2 1/2] davinci: remove macro CONFIG_DISPLAY_CPUINFO   Manjunath Hadli
• [U-Boot] [PATCH v2 2/2] davinci: add support for printing clock frequency   Manjunath Hadli
• [U-Boot] [PATCH v2] davinci: cleanup davinci_sync_env_enetaddr() fucntion   Manjunath Hadli
• [U-Boot] [PATCH v2] davinci: cleanup davinci_sync_env_enetaddr() fucntion   Hadli, Manjunath
• [U-Boot] [PATCH v3] davinci: cleanup davinci_sync_env_enetaddr() fucntion   Manjunath Hadli
• [U-Boot] [PATCH v2 0/2] da850evm: add board specific functions   Manjunath Hadli
• [U-Boot] [PATCH v2 1/2] da850evm: add support to read mac address from SPI flash   Manjunath Hadli
• [U-Boot] [PATCH v2 2/2] da850evm: read mac address from I2C EEPROM on AM18x EVM   Manjunath Hadli
• [U-Boot] [PATCH v2 1/2] da850evm: add support to read mac address from SPI flash   Hadli, Manjunath
• [U-Boot] BDM4GDB   Andrew Hakman
• [U-Boot] reminder for [PATCH 0/5] Support for qualcomm msm7630 board   Mohamed Haneef
• [U-Boot] [PATCH] net: calxedaxgmac: fix build due to missing __aligned definition   Rob Herring
• [U-Boot] [PATCH v3] net: allow setting env enetaddr from net device setting   Rob Herring
• [U-Boot] [PATCH 0/6] Highbank platform updates   Rob Herring
• [U-Boot] [PATCH 1/6] ARM: highbank: fix us_to_tick calculation   Rob Herring
• [U-Boot] [PATCH 2/6] ARM: highbank: change TEXT_BASE to 0x8000   Rob Herring
• [U-Boot] [PATCH 3/6] ARM: highbank: Add boot counter support   Rob Herring
• [U-Boot] [PATCH 4/6] ARM: highbank: add reset support   Rob Herring
• [U-Boot] [PATCH 5/6] ARM: highbank: change env config to use nvram   Rob Herring
• [U-Boot] [PATCH 6/6] ARM: highbank: setup env from boot source register   Rob Herring
• [U-Boot] [STATUS] [ARM]   Rob Herring
• [U-Boot] [STATUS] [ARM]   Rob Herring
• [U-Boot] [PATCH 0/2] Highbank fixes for 2012.03   Rob Herring
• [U-Boot] [PATCH 1/2] ARM: highbank: fix warning for calxedaxgmac_initialize   Rob Herring
• [U-Boot] [PATCH 2/2] ARM: highbank: add missing get_tbclk   Rob Herring
• [U-Boot] [PATCH 0/6] Highbank platform updates   Rob Herring
• [U-Boot] [PATCH 0/2] Highbank fixes for 2012.03   Rob Herring
• [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface   Joe Hershberger
• [U-Boot] [PATCH 17/28] net: Refactor to separate the UDP handler from the ARP handler   Joe Hershberger
• [U-Boot] [PATCH 09/28] net: cosmetic: Un-typedef variables in net   Joe Hershberger
• [U-Boot] [PATCH 18/28] net: Add NetUpdateEther() to handle ARP or Ping replies (VLAN or SNAP)   Joe Hershberger
• [U-Boot] [PATCH 22/28] net: Fix net buffer initialization   Joe Hershberger
• [U-Boot] [PATCH 04/28] net: Make the MAC-seeded random number generator available to /net   Joe Hershberger
• [U-Boot] [PATCH 26/28] net: Add link-local addressing support   Joe Hershberger
• [U-Boot] [PATCH 07/28] net: Move PING out of net.c   Joe Hershberger
• [PATCH 1/1] nios2-generic: Fix logic around choosing UART   Alex Hornung
• [U-Boot] [PATCH 1/2] nios2-generic: Fix logic around choosing UART   Alex Hornung
• [U-Boot] [PATCH 2/2] nios2: implement get_ticks and get_tbclk   Alex Hornung
• [U-Boot] [PATCH 1/2] nios2-generic: Fix logic around choosing UART   Alex Hornung
• [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc   Alex Hornung
• [U-Boot] [PATCH 1/1] nios2 - adjust gbl data off to account for bd_info   Alex Hornung
• [U-Boot] [PATCH 1/1] nios2 - adjust gbl data off to account for bd_info   Alex Hornung
• [U-Boot] How to use external fdt file with kernel+initramfs uimage?   Howard, Marc
• [U-Boot] [PATCH 0/3] mxc_spi refactoring (for mx6q and mx6qsabrelite)   Jason Hui
• [U-Boot] [PATCH V6 - Part 2 - 1/3] mxc_spi: move machine specifics into CPU headers   Jason Hui
• [U-Boot] [PATCH V6 - Part 2 - 2/3] mx6q: Add support for ECSPI through mxc_spi driver   Jason Hui
• [U-Boot] [PATCH V6 - Part 2 - 3/3] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform   Jason Hui
• [U-Boot] [PATCH V6 - Part 3 - 1/2] sf command: allow default bus and chip selects   Jason Hui
• [U-Boot] [PATCH V6 - Part 2 - 2/2] README: Add description of SPI Flash (SF) command configuration   Jason Hui
• [U-Boot] [PATCH V6 - Part 4 - 1/1] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select   Jason Hui
• [U-Boot] [PATCH V6 - Part 5 - 1/1] mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash   Jason Hui
• [U-Boot] [PATCH v3 5/5] i.mx6q: mx6qsabrelite: Update the network configuration   Jason Hui
• [U-Boot] [PATCH 9/9] MX53: mx53loco: Add SATA support   Jason Hui
• [U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs   Liu Hui-R64343
• [U-Boot] [PATCH] net: sh_eth: Remove SH_ETH_PHY_DELAY   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] net: sh_eth: Collect up EDMR_INIT_CNT to TIMEOUT_CNT   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] net: sh_eth: Remove unnecessary return   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] net: sh_eth: Add support SH7734 Ethernet device   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: Add support for r0p7734 board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] net: sh_eth: Fix build warnings and whitespace for sh_eth   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: r0p7734: Add support I2C and set MAC address   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2] sh: i2c: Add support I2C controller of SH7734   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: Add bit control functions   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] net: sh_eth: Fix build warnings and whitespace for sh_eth   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: Fix sh7264 clock speed and related serial setting   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2] sh: i2c: Add support I2C controller of SH7734   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: Add bit control functions   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: Add bit control functions   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] net: sh_eth: Fix build warnings and whitespace for sh_eth   Nobuhiro Iwamatsu
• [U-Boot] sh: build warnings in clock code   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] ARM: dreamplug: Enable FDT support   Jason
• [U-Boot] [PATCH 1/1] arm: mmc: omap: spl size reduction by removing write/erase ops   Balaji T K
• [U-Boot] [PING] Re: [PATCH] ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board   Minkyu Kang
• [U-Boot] [PATCH] TRATS: set gpio of UART correctly   Minkyu Kang
• [U-Boot] [PATCH v9 0/4] Add SMDK5250 board support   Minkyu Kang
• [U-Boot] [PATCH v2] SMDK5250: Add ethernet support   Minkyu Kang
• [U-Boot] please pull u-boot-samsung/master   Minkyu Kang
• [U-Boot] [PATCH V3] ARM: fix s3c2410 timer code   Minkyu Kang
• [U-Boot] [PATCH v6 3/4] EXYNOS: Add SMDK5250 board support   Chander Kashyap
• [U-Boot] [PATCH v7 0/4] Add SMDK5250 board support   Chander Kashyap
• [U-Boot] [PATCH v7 1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro   Chander Kashyap
• [U-Boot] [PATCH v7 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs   Chander Kashyap
• [U-Boot] [PATCH v7 3/4] EXYNOS: Add SMDK5250 board support   Chander Kashyap
• [U-Boot] [PATCH v7 4/4] EXYNOS: SMDK5250: Add MMC SPL support   Chander Kashyap
• [U-Boot] [PATCH v7 4/4] EXYNOS: SMDK5250: Add MMC SPL support   Chander Kashyap
• [U-Boot] [PATCH v8 0/4] Add SMDK5250 board support   Chander Kashyap
• [U-Boot] [PATCH v8 1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro   Chander Kashyap
• [U-Boot] [PATCH v8 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs   Chander Kashyap
• [U-Boot] [PATCH v8 3/4] EXYNOS: Add SMDK5250 board support   Chander Kashyap
• [U-Boot] [PATCH v8 4/4] EXYNOS: SMDK5250: Add MMC SPL support   Chander Kashyap
• [U-Boot] [PATCH v8 4/4] EXYNOS: SMDK5250: Add MMC SPL support   Chander Kashyap
• [U-Boot] [PATCH v9 0/4] Add SMDK5250 board support   Chander Kashyap
• [U-Boot] [PATCH v9 1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro   Chander Kashyap
• [U-Boot] [PATCH v9 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs   Chander Kashyap
• [U-Boot] [PATCH v9 3/4] EXYNOS: Add SMDK5250 board support   Chander Kashyap
• [U-Boot] [PATCH v9 4/4] EXYNOS: SMDK5250: Add MMC SPL support   Chander Kashyap
• [U-Boot] [Samsung] [PATCH v7 4/4] EXYNOS: SMDK5250: Add MMC SPL support   Chander Kashyap
• [U-Boot] [PATCH] SMDK5250: Add ethernet support   Chander Kashyap
• [U-Boot] [PATCH] SMDK5250: Add ethernet support   Chander Kashyap
• [U-Boot] [PATCH v2] SMDK5250: Add ethernet support   Chander Kashyap
• [U-Boot] [PATCH] EXYNOS: SMDK5250: Add support for DDR3 memory.   Chander Kashyap
• [U-Boot] [PATCH v2] EXYNOS: SMDK5250: Support all 4 UARTs   Chander Kashyap
• [U-Boot] Patch: Fix device enumeration through API.   Tim Kientzle
• [U-Boot] [PATCH 2/4] net: fec_mxc: add PHYLIB support   Troy Kisky
• [U-Boot] [PATCH v3 1/5] net: fec_mxc: add 1000 Mbps selection   Troy Kisky
• [U-Boot] [PATCH v3 2/5] net: fec_mxc: add PHYLIB support   Troy Kisky
• [U-Boot] [PATCH v3 3/5] net: phy: add support for Micrel's KSZ9021   Troy Kisky
• [U-Boot] [PATCH v3 4/5] net: phy: make board_phy_config responsible for calling drv->config   Troy Kisky
• [U-Boot] [PATCH v3 5/5] i.mx6q: mx6qsabrelite: Update the network configuration   Troy Kisky
• [U-Boot] [PATCH v3 1/5] net: fec_mxc: add 1000 Mbps selection   Troy Kisky
• [U-Boot] [PATCH v3 5/5] i.mx6q: mx6qsabrelite: Update the network configuration   Troy Kisky
• [U-Boot] [PATCH v4 1/5] net: fec_mxc: add 1000 Mbps selection   Troy Kisky
• [U-Boot] [PATCH v4 2/5] net: fec_mxc: add PHYLIB support   Troy Kisky
• [U-Boot] [PATCH v4 3/5] net: phy: add support for Micrel's KSZ9021   Troy Kisky
• [U-Boot] [PATCH v4 4/5] net: phy: make board_phy_config responsible for calling drv->config   Troy Kisky
• [U-Boot] [PATCH v4 5/5] i.mx6q: mx6qsabrelite: Update the network configuration   Troy Kisky
• [U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds   Troy Kisky
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Troy Kisky
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Troy Kisky
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Troy Kisky
• [U-Boot] [PATCH 2/2] RFC: Let linker create phy array   Troy Kisky
• [U-Boot] [PATCH v4 1/5] net: fec_mxc: add 1000 Mbps selection   Troy Kisky
• [U-Boot] [PATCH v5 1/5] net: fec_mxc: add 1000 Mbps selection   Troy Kisky
• [U-Boot] [PATCH v5 2/5] net: fec_mxc: add PHYLIB support   Troy Kisky
• [U-Boot] [PATCH v5 3/5] net: phy: add support for Micrel's KSZ9021   Troy Kisky
• [U-Boot] [PATCH v5 4/5] net: phy: make board_phy_config responsible for calling drv->config   Troy Kisky
• [U-Boot] [PATCH v5 5/5] i.mx6q: mx6qsabrelite: Update the network configuration   Troy Kisky
• [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds   Troy Kisky
• [U-Boot] [PATCH v2 2/2] RFC: Let linker create phy array   Troy Kisky
• [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds   Troy Kisky
• [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds   Troy Kisky
• [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds   Troy Kisky
• [U-Boot] [PATCH v5 5/5] i.mx6q: mx6qsabrelite: Update the network configuration   Troy Kisky
• [U-Boot] ARM: Update mach-types   Troy Kisky
• [U-Boot] ARM: Update mach-types   Troy Kisky
• [U-Boot] ARM: Update mach-types   Troy Kisky
• [U-Boot] [PATCH 0/2] mmc: card status polling fixes   Jan Kloetzke
• [U-Boot] [PATCH 1/2] mmc: fix card busy polling   Jan Kloetzke
• [U-Boot] [PATCH 2/2] mmc: make mmc_send_status() more reliable   Jan Kloetzke
• [U-Boot] [PATCH] post: new parallel nor flash test   Vaibhav Kothari
• [U-Boot] [PATCH 1/2] openrisc/bitops: add hweightX defines   Stefan Kristiansson
• [U-Boot] [PATCH] openrisc: implement get_ticks and get_tbclk   Stefan Kristiansson
• [U-Boot] [PATCH 1/2] openrisc/bitops: add hweightX defines   Stefan Kristiansson
• [U-Boot] Formatting bootable SD, freescale platform   Joe Kulikauskas
• [U-Boot] u-boot for SPEAr1310   Vipin Kumar
• [U-Boot] u-boot for SPEAr1310   Vipin Kumar
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Vipin Kumar
• [U-Boot] [PATCH] PSC9131/PSC9130/PSC9231 Processor Support Added   Prabhakar Kushwaha
• [U-Boot] [PATCH] powerpc/85xx:Add PSC9131 RDB Support   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/2] powerpc/85xx:Avoid hardcoded vector address for IVORs   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/2] powerpc/85xx:Fix IVORs addr after vector table relocation   Prabhakar Kushwaha
• [U-Boot] [PATCH] powerpc/85xx:Avoid vector table compilation for nand_spl   Prabhakar Kushwaha
• [U-Boot] powerpc/85xx:debugger support patch   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/4] doc: Add documentation for mpc85xx debugger support   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/4] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/4] powerpc/85xx:Update NOR code base to support debugger   Prabhakar Kushwaha
• [U-Boot] [PATCH 4/4] powerpc/85xx:Update NAND code base to support debugger   Prabhakar Kushwaha
• [U-Boot] [PATCH] config.mk:Update DBGFLAGS with dwarf information   Prabhakar Kushwaha
• [U-Boot] [PATCH] powerpc/85xx:Add PSC9131 RDB Support   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/2][v2] powerpc/85xx:Add PSC9131 RDB Support   Prabhakar Kushwaha
• [U-Boot] [PATCH] Ethernut 5: fix build error for board_mmc_getcd()   Prabhakar Lad
• [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()   Prabhakar Lad
• [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()   Prabhakar Lad
• [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()   Prabhakar Lad
• [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()   Prabhakar Lad
• [U-Boot] Add SPL support   Prabhakar Lad
• [U-Boot] [PATCH] dm6467Tevm: Use a common configuration file for davinci_dm6467evm and davinci_dm6467Tevm   Prabhakar Lad
• [U-Boot] [PATCH] Ethernut 5: fix build error for board_mmc_getcd()   Prabhakar Lad
• [U-Boot] [PATCH v2] Ethernut 5: fix build error   Prabhakar Lad
• [U-Boot] MPC8313 DDR2 configuration   Scott Larson
• [U-Boot] MPC8313 DDR2 configuration   Scott Larson
• [U-Boot] Integity validation (checksum) of a squashfs root file system   Pascal Levesque
• [U-Boot] Integity validation (checksum) of a squashfs root file system   Pascal Levesque
• [U-Boot] Integity validation (checksum) of a squashfs root file system   Pascal Levesque
• [U-Boot] Integity validation (checksum) of a squashfs root file system   Pascal Levesque
• [U-Boot] [PATCH v2 2/2] nds32/ag101/watchdog.S: add linkage support   Macpaul Lin
• [U-Boot] [PATCH] nds32/board.c: add PCI prompt at boot up   Macpaul Lin
• [U-Boot] Pull request: u-boot-nds32/master   Macpaul Lin
• [U-Boot] [PATCH v3 1/4] nds32/ag102: add header support of ag102 soc   Macpaul Lin
• [U-Boot] [PATCH v3 2/4] nds32/ag102: add ag102 soc support   Macpaul Lin
• [U-Boot] [PATCH v3 3/4] board/adp-ag102: add board specific files   Macpaul Lin
• [U-Boot] [PATCH v3 4/4] board/adp-ag102: add configuration of adp-ag102   Macpaul Lin
• [U-Boot] [PATCH v2 4/7] tegra: Add I2C driver   Yen Lin
• [U-Boot] [PATCH v3 5/9] tegra: i2c: Add I2C driver   Yen Lin
• [U-Boot] [PATCH 1/3 v2] common: add possibility for readline_into_buffer timeout   Stephan Linz
• [U-Boot] [PATCH] microblaze: avoid interrupt race conditions   Stephan Linz
• [U-Boot] [PATCH] microblaze: fix build failure due to undefined reference to `get_ticks'   Stephan Linz
• [U-Boot] [PATCH] microblaze: fix build failure due to undefined reference to `get_ticks'   Stephan Linz
• [U-Boot] [PATCH] microblaze: fix build failure due to undefined reference to `get_ticks'   Stephan Linz
• [U-Boot] [PATCH] microblaze: avoid interrupt race conditions   Stephan Linz
• [U-Boot] [PATCH] microblaze: fix build failure due to undefined reference to `get_ticks'   Stephan Linz
• [U-Boot] state of LL TEMAC evaluation   Stephan Linz
• [U-Boot] [PATCH] microblaze: fix build failure due to undefined reference to `get_ticks'   Stephan Linz
• [U-Boot] [PATCH 8/8] microblaze: ll_temac: export xilinx_ll_temac_eth_init() for evaluation   Stephan Linz
• [U-Boot] [PREVIEW] LL TEMAC v10 refactored -- for evaluation only   Stephan Linz
• [U-Boot] [PATCH] microblaze: Enable phylib and mii support   Stephan Linz
• [U-Boot] [PATCH 1/4] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
• [U-Boot] [PATCH 2/4] microblaze: Enable several ethernet driver compilation   Stephan Linz
• [U-Boot] [PATCH 3/4] microblaze: Add faked LL_TEMAC driver configuration   Stephan Linz
• [U-Boot] [PATCH 4/4] microblaze: Wire up LL_TEMAC driver initialization   Stephan Linz
• [U-Boot] [PATCH 2/4] microblaze: Enable several ethernet driver compilation   Stephan Linz
• [U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO   Jason Liu
• [U-Boot] [PATCH 1/5] mx53loco: Use gpio_direction_input prior to gpio_get_value   Jason Liu
• [U-Boot] [PATCH 3/5] mx53evk: Use gpio_direction_input prior to gpio_get_value   Jason Liu
• [U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when missing USB PHY clock   Shengzhou Liu
• [U-Boot] [PATCH v3 6/7] usb: ulpi: Extend the existing ulpi framework.   SUBHASHINI MANNE
• [U-Boot] u-boot for SPEAr1310   Pavel Machek
• [U-Boot] u-boot for SPEAr1310   Pavel Machek
• [U-Boot] [PATCH] arm:fix:cleanup: Volatile keyword removal   Lukasz Majewski
• [U-Boot] Can u-Boot Ran from RAM?   Charles Manning
• [U-Boot] Porting YAFFS2 to U-boot   Charles Manning
• [U-Boot] Build u-Boot for NAND boot on i.MX53x platform   Charles Manning
• [U-Boot] Configuration settings for Freescale i.MX53x demo boards   Charles Manning
• [U-Boot] Does U-boot support ASLR?   Jason Markley
• [U-Boot] [PATCH] USB: reevaluate iomux stdin on USB kbd detect   Allen Martin
• [U-Boot] Formatting bootable SD, freescale platform   McClintock Matthew-B29882
• [U-Boot] [PATCH] beagle: fix typos   Peter Meerwald
• [U-Boot] [PATCH] omap3: fix comment typos   Peter Meerwald
• [U-Boot] [PATCH] doc: fix typos   Peter Meerwald
• [U-Boot] [PATCH] beagle: enable DVI_PUP   Peter Meerwald
• [U-Boot] [PATCH 1/3] doc: complete, typos   Peter Meerwald
• [U-Boot] [PATCH 2/3] cmd_eeprom: typo   Peter Meerwald
• [U-Boot] [PATCH 3/3] usb_ether: fix typo   Peter Meerwald
• [U-Boot] [PATCH 6/6] SPL: Add README.omap3   Peter Meerwald
• [U-Boot] OMAP USB, beagle-xm fail   Peter Meerwald
• [U-Boot] OMAP USB, beagle-xm fail   Peter Meerwald
• [U-Boot] [PATCH]powerpc/8xxx: Cleanup USB device-tree fixup   Ramneek Mehresh
• [U-Boot] [PATCH][v2]powerpc/8xxx:Add MPH controller support in USB device-tree fixup   Ramneek Mehresh
• [U-Boot] [PATCH][v3]powerpc/8xxx:Add MPH controller support in USB device-tree fixup   Ramneek Mehresh
• [U-Boot] Password protection of U-Boot command line   Frans Meulenbroeks
• [U-Boot] Password protection of U-Boot command line   Frans Meulenbroeks
• [U-Boot] Password protection of U-Boot command line   Frans Meulenbroeks
• [U-Boot] Porting YAFFS2 to U-boot   Bud Miljkovic
• [U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO   Bud Miljkovic
• [U-Boot] Can u-Boot Ran from RAM?   Bud Miljkovic
• [U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO   Bud Miljkovic
• [U-Boot] Build u-Boot for NAND boot on i.MX53x platform   Bud Miljkovic
• [U-Boot] Configuration settings for Freescale i.MX53x demo boards   Bud Miljkovic
• [U-Boot] [PATCH] Avoid using GNU basename   Keith Mok
• [U-Boot] M29W256GL + WEIM in uboot   Francisco Muñoz
• [U-Boot] M29W256GL + WEIM in uboot   Francisco Muñoz
• [U-Boot] M29W256GL + WEIM in uboot   Francisco Muñoz
• [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects   Eric Nelson
• [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects   Eric Nelson
• [U-Boot] [PATCH] mx6q: mx6qsabrelite: setup_spi() should be called in board_init to allow use for environment   Eric Nelson
• [U-Boot] ARM: Update mach-types   Eric Nelson
• [U-Boot] u-boot in debug mode P2020   Ivan Neskorodev
• [U-Boot] [PATCH] to correct Issue with PowerPc implementation of resetting the watchdog in the decrementer exception handler   Eric Olsen
• [U-Boot] OMAP USB, beagle-xm fail   Patil, Rachna
• [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support   Patil, Rachna
• [U-Boot] [PATCH v2] fix CFI flash driver for 8-bit bus support   Luka Perkov
• [U-Boot] [PATCH v2] fix CFI flash driver for 8-bit bus support   Luka Perkov
• [U-Boot] u-boot-2011.12-r3 build fails without CONFIG_CMD_NET   Maxim Podbereznyy
• [U-Boot] adding a new command to help menu   Érico Porto
• [U-Boot] adding a new command to help menu   Érico Porto
• [U-Boot] [PATCH 11/17] OMAP5: defconfig: Align the defconfig for 5430 ES1.0   R, Sricharan
• [U-Boot] [PATCH 04/17] OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.   R, Sricharan
• [U-Boot] [PATCH 15/17] power: twl6035: add palmas PMIC support   R, Sricharan
• [U-Boot] [PATCH 11/17] OMAP5: defconfig: Align the defconfig for 5430 ES1.0   R, Sricharan
• [U-Boot] [PATCH 3/3] imx31: tt01: fix hush parser config, add release config   Helmut Raiger
• [U-Boot] [PATCH V2 2/3] tt01: add video support   Helmut Raiger
• [U-Boot] [PATCH] mx31: add "ARM11P power gating" to get_reset_cause   Helmut Raiger
• [U-Boot] [PATCH]powerpc/8xxx:Add MPH controller support in USB device-tree fixup   Mehresh Ramneek-B31383
• [U-Boot] Problem in loading rootfs   Tahir Rauf
• [U-Boot] [PATCH] Ethernut 5: fix build error for board_mmc_getcd()   Thierry Reding
• [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()   Thierry Reding
• [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()   Thierry Reding
• [U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()   Thierry Reding
• [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support   Christian Riesch
• [U-Boot] [PATCH v5 4/7] arm, arm926ejs: Do not clear the V bit on DA850 SoCs   Christian Riesch
• [U-Boot] [PATCH v6 0/7] Change ARM926EJ-S startup code, hawkboard and calimain   Christian Riesch
• [U-Boot] [PATCH v6 1/7] arm, davinci: Add lowlevel_init for SoCs other than DM644X   Christian Riesch
• [U-Boot] [PATCH v6 2/7] arm, arm926ejs: Do cpu critical inits only for boards that require it   Christian Riesch
• [U-Boot] [PATCH v6 3/7] arm, arm926ejs: Flush the data cache before disabling it   Christian Riesch
• [U-Boot] [PATCH v6 4/7] arm, arm926ejs: Add option CONFIG_SYS_EXCEPTION_VECTORS_HIGH   Christian Riesch
• [U-Boot] [PATCH v6 5/7] arm, arm926ejs: Enable icache only if CONFIG_SYS_ICACHE_OFF is not defined   Christian Riesch
• [U-Boot] [PATCH v6 6/7] Changes to move hawkboard to the new spl infrastructure   Christian Riesch
• [U-Boot] [PATCH v6 7/7] arm, davinci: Add support for the Calimain board from OMICRON electronics   Christian Riesch
• [U-Boot] [PATCH 0/2] da850evm: add board specific functions   Christian Riesch
• [U-Boot] [PATCH 1/2 V3] arm926: Flush the data cache before disabling it   Christian Riesch
• [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata   Christian Riesch
• [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata   Christian Riesch
• [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support   Tom Rini
• [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support   Tom Rini
• [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support   Tom Rini
• [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support   Tom Rini
• [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support   Tom Rini
• [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support   Tom Rini
• [U-Boot] [PATCH 1/1] arm: mmc: omap: spl size reduction by removing write/erase ops   Tom Rini
• [U-Boot] [PATCH 3/3] davinci: add clocks command   Tom Rini
• [U-Boot] [PATCH 1/1] arm: mmc: omap: spl size reduction by removing write/erase ops   Tom Rini
• [U-Boot] [PATCHv2] OMAP3: Add Corscience Tricorder board   Tom Rini
• [U-Boot] [PATCH] OMAP SPL: Fix missing timer_init() call in OMAP4 s_init()   Tom Rini
• [U-Boot] [PATCH v2] arm, davinci: cam_enc_4xx board updates   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH] tools: checkstack.pl from Linux added to tools   Tom Rini
• [U-Boot] [PATCH v3 0/7] Clean up ehci-omap and extend support for omap3/4 socs   Tom Rini
• [U-Boot] [PATCH V4] nand_spl_simple: store ecc data on the stack   Tom Rini
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Tom Rini
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Tom Rini
• [U-Boot] [RFC PATCH 1/4] ARM: enable Thumb build   Tom Rini
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Tom Rini
• [U-Boot] [PATCH] ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition.   Tom Rini
• [U-Boot] [PATCH 1/2] image: add support for Android's boot image format   Tom Rini
• [U-Boot] [PATCH 1/6] .gitignore: Add .su files   Tom Rini
• [U-Boot] [PATCH 2/6] config.mk: Make cc-option create a file under include/generated   Tom Rini
• [U-Boot] [PATCH 3/6] arm: Check for -fstack-usage support   Tom Rini
• [U-Boot] [PATCH 4/6] spl.c: Use __noreturn decorator   Tom Rini
• [U-Boot] [PATCH 5/6] README: Add more SPL config options   Tom Rini
• [U-Boot] [PATCH 6/6] SPL: Add README.omap3   Tom Rini
• [U-Boot] [PATCH 6/6] SPL: Add README.omap3   Tom Rini
• [U-Boot] [PATCH V13 01/12] Add cmd_spl command   Tom Rini
• [U-Boot] [PATCH V13 01/12] Add cmd_spl command   Tom Rini
• [U-Boot] [PATCH V13 01/12] Add cmd_spl command   Tom Rini
• [U-Boot] [PATCH] cam_enc_4xx: Rename 'images' to 'imgs'   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [STATUS] [ARM]   Tom Rini
• [U-Boot] [STATUS] [ARM]   Tom Rini
• [U-Boot] [PATCH V13 12/12] arm: Add Prep subcommand support to bootm   Tom Rini
• [U-Boot] [PATCH V13 12/12] arm: Add Prep subcommand support to bootm   Tom Rini
• [U-Boot] OMAP USB, beagle-xm fail   Tom Rini
• [U-Boot] [PATCH] am33xx: ddr_defs.h: Change DDR timings   Tom Rini
• [U-Boot] [PATCH 0/1] am335x_evm: Change MAINTAINERS   Tom Rini
• [U-Boot] [PATCH] am335x_evm: Change MAINTAINERS entry   Tom Rini
• [U-Boot] [PATCH] omap3_beagle: Change MAINTAINERS entry   Tom Rini
• [U-Boot] [PATCH] Tricorder: Store ecc data on stack   Tom Rini
• [U-Boot] [PATCH] Tricorder: Fix boot after making software ecc configurable   Tom Rini
• [U-Boot] [PATCH v2 0/6] SPL-related documentation / checking   Tom Rini
• [U-Boot] [PATCH v2 1/6] .gitignore: Add .su files   Tom Rini
• [U-Boot] [PATCH v2 2/6] config.mk: Make cc-option create a file under include/generated   Tom Rini
• [U-Boot] [PATCH v2 3/6] config.mk: Check for -fstack-usage support   Tom Rini
• [U-Boot] [PATCH v2 4/6] spl.c: Use __noreturn decorator   Tom Rini
• [U-Boot] [PATCH v2 5/6] README: Add more SPL config options   Tom Rini
• [U-Boot] [PATCH v2 6/6] SPL: Add README.omap3   Tom Rini
• [U-Boot] [PATCH v2 2/6] config.mk: Make cc-option create a file under include/generated   Tom Rini
• [U-Boot] [PATCH v3 0/6] SPL-related documentation / checking   Tom Rini
• [U-Boot] [PATCH v3 1/6] .gitignore: Add .su files   Tom Rini
• [U-Boot] [PATCH v3 2/6] config.mk: Make cc-option create a file under include/generated   Tom Rini
• [U-Boot] [PATCH v3 3/6] config.mk: Check for -fstack-usage support   Tom Rini
• [U-Boot] [PATCH v3 4/6] spl.c: Use __noreturn decorator   Tom Rini
• [U-Boot] [PATCH v3 5/6] README: document more SPL config options   Tom Rini
• [U-Boot] [PATCH v3 6/6] SPL: Add README.omap3   Tom Rini
• [U-Boot] [PATCH] Tricorder: Switch env to generic mmc driver   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] Please pull u-boot-staging/trini at ti.com   Tom Rini
• [U-Boot] [PATCH v3 6/6] SPL: Add README.omap3   Tom Rini
• [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number   Tom Rini
• [U-Boot] [PATCH v2 2/2] davinci: add support for printing clock frequency   Tom Rini
• [U-Boot] [PATCH 04/17] OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.   Tom Rini
• [U-Boot] [PATCH 11/17] OMAP5: defconfig: Align the defconfig for 5430 ES1.0   Tom Rini
• [U-Boot] [PATCH 15/17] power: twl6035: add palmas PMIC support   Tom Rini
• [U-Boot] [PATCH 16/17] omap5: pbias ldo9 turn on   Tom Rini
• [U-Boot] u-boot-2011.12-r3 build fails without CONFIG_CMD_NET   Tom Rini
• [U-Boot] [PATCH] ARM:OMAP+:MMC: Add parameters to MMC init   Tom Rini
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Tom Rini
• [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support   Tom Rini
• [U-Boot] [PATCH] Revert "ARM: I2C: I2C Multi byte address support"   Tom Rini
• [U-Boot] [PATCH v4 6/6] SPL: Add README.omap3   Tom Rini
• [U-Boot] [PATCH v4 3/6] config.mk: Check for -fstack-usage support   Tom Rini
• [U-Boot] [PATCH] Revert "ARM: I2C: I2C Multi byte address support"   Tom Rini
• [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support   Tom Rini
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Tom Rini
• [U-Boot] [PATCH 11/17] OMAP5: defconfig: Align the defconfig for 5430 ES1.0   Tom Rini
• [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata   Tom Rini
• [U-Boot] [PATCH v4 09/13] hawkboard: Modify to work with generic relocation   Tom Rini
• [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__))   Tom Rini
• [U-Boot] [PATCH 2/2] usb: Add quirk "USB_QUIRK_STRING_FETCH_255"   Tom Rini
• [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH v2] MAKEALL: display SPL size if present   Tom Rini
• [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build   Tom Rini
• [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build   Tom Rini
• [U-Boot] [PATCH] cmd_nand.c: Fix 'nand dump' after latest MTD resync   Tom Rini
• [U-Boot] [PATCH] cmd_nand.c: Fix 'nand dump' after latest MTD resync   Tom Rini
• [U-Boot] Craneboard with Uboot and xloader   Tom Rini
• [U-Boot] [PATCH] ARM:OMAP+:MMC: Add parameters to MMC init   Tom Rini
• [U-Boot] Craneboard with Uboot and xloader   Tom Rini
• [U-Boot] Craneboard with Uboot and xloader   Tom Rini
• [U-Boot] Craneboard with Uboot and xloader   Tom Rini
• [U-Boot] [PATCH v2 0/4] Clean up ehci-omap and extend support for omap3/4 socs   Tom Rini
• [U-Boot] [PATCH 01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only   Tom Rini
• [U-Boot] [PATCH 03/28] net: Move mv64x6x_eth_initialize() to board_eth_init()   Stefan Roese
• [U-Boot] [PATCH] * Fix: watchdog timed out, if flash blank (0xFF) blocks   Stefan Roese
• [U-Boot] [PATCH] add STM29F400BB to table of supported legacy flashs   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash   Stefan Roese
• [U-Boot] [PATCH] ARM: Convert spear3xx and spear6xx boards to boards.cfg   Stefan Roese
• [U-Boot] Flash not erased problem.   Stefan Roese
• [U-Boot] u-boot for SPEAr1310   Stefan Roese
• [U-Boot] u-boot for SPEAr1310   Stefan Roese
• [U-Boot] u-boot for SPEAr1310   Stefan Roese
• [U-Boot] u-boot for SPEAr1310   Stefan Roese
• [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface   Stefan Roese
• [U-Boot] [PATCH 03/11] st_smi: Return error in case TFF is not set   Stefan Roese
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Pali Rohár
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Pali Rohár
• [U-Boot] [PATCH 05/15] common/main.c: Fix function readline   Pali Rohár
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Pali Rohár
• [U-Boot] [PATCH 01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only   Pali Rohár
• [U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds   Graeme Russ
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Graeme Russ
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Graeme Russ
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Graeme Russ
• [U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds   Graeme Russ
• [U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds   Graeme Russ
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Graeme Russ
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Graeme Russ
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Graeme Russ
• [U-Boot] Pull request: u-boot-x86   Graeme Russ
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Graeme Russ
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Graeme Russ
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Graeme Russ
• [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds   Graeme Russ
• [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds   Graeme Russ
• [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds   Graeme Russ
• [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds   Graeme Russ
• [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds   Graeme Russ
• [U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds   Graeme Russ
• [U-Boot] [PATCH] bugfix: all Marvell specific build fails due to undefined reference to `get_ticks'   Graeme Russ
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Graeme Russ
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Graeme Russ
• [U-Boot] Does U-boot support ASLR?   Graeme Russ
• [U-Boot] Does U-boot support ASLR?   Graeme Russ
• [U-Boot] Password protection of U-Boot command line   Graeme Russ
• [U-Boot] Password protection of U-Boot command line   Graeme Russ
• [U-Boot] Password protection of U-Boot command line   Graeme Russ
• [U-Boot] Password protection of U-Boot command line   Graeme Russ
• [U-Boot] Password protection of U-Boot command line   Graeme Russ
• [U-Boot] Password protection of U-Boot command line   Graeme Russ
• [U-Boot] Password protection of U-Boot command line   Graeme Russ
• [U-Boot] [RFC PATCH v2 0/28] Create generic board init for ARM, x86, PPC   Graeme Russ
• [U-Boot] [PATCH] Revert "ARM: I2C: I2C Multi byte address support"   Graeme Russ
• [U-Boot] [PATCH 1/1] nios2 - adjust gbl data off to account for bd_info   Graeme Russ
• [U-Boot] [PATCH v4 0/13] Introduce generic relocation feature   Graeme Russ
• [U-Boot] [PATCH 1/2] openrisc/bitops: add hweightX defines   Graeme Russ
• [U-Boot] [PATCH 1/1] nios2 - adjust gbl data off to account for bd_info   Graeme Russ
• [U-Boot] Unable to run scripts with autoscr command   Graeme Russ
• [U-Boot] Unable to run scripts with autoscr command   Graeme Russ
• [U-Boot] Deprecation (planned removal) of 'maintainer-less' code   Graeme Russ
• [U-Boot] Deprecation (planned removal) of 'maintainer-less' code   Graeme Russ
• [U-Boot] Facing the problem with yaffs2 from uboot   Graeme Russ
• [U-Boot] Unable to run scripts with autoscr command   Graeme Russ
• [U-Boot] Unable to run scripts with autoscr command   Graeme Russ
• [U-Boot] Unable to run scripts with autoscr command   Graeme Russ
• [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc   Graeme Russ
• [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc   Graeme Russ
• [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc   Graeme Russ
• [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc   Graeme Russ
• [U-Boot] memory corruption on nios2 due to overlap of gbl data and malloc   Graeme Russ
• [U-Boot] [PATCH] EXYNOS: SMDK5250: Add support for DDR3 memory.   Hatim Rv
• [U-Boot] [PATCH v3] AT91SAM9*: Change kernel address in dataflash to match u-boot's size   Ulf Samuelsson
• [U-Boot] [PATCH v3] AT91SAM9*: Change kernel address in dataflash to match u-boot's size   Ulf Samuelsson
• [U-Boot] [PATCH v3] AT91SAM9*: Change kernel address in dataflash to match u-boot's size   Ulf Samuelsson
• [U-Boot] Flash not erased problem.   Sanjoy Saha - ERS, HCL Tech
• [U-Boot] PR1-Appliance UART Boot Issue   Amber and Sarosh
• [U-Boot] PR1-Appliance UART Boot Issue   Amber and Sarosh
• [U-Boot] PR1-Appliance UART Boot Issue   Amber and Sarosh
• [U-Boot] [PATCH] usb: align buffers at cache boundary   Puneet Saxena
• [U-Boot] [PATCH 1/2] usb: align buffers at cacheline   Puneet Saxena
• [U-Boot] [PATCH 2/2] usb: Add quirk "USB_QUIRK_STRING_FETCH_255"   Puneet Saxena
• [U-Boot] [PATCH v2 1/2] usb: align buffers at cacheline   Puneet Saxena
• [U-Boot] [PATCH v2 2/2] usb: Add CONFIG to fetch string descriptor   Puneet Saxena
• [U-Boot] [PATCH v3 1/2] usb: align buffers at cacheline   Puneet Saxena
• [U-Boot] [PATCH v3 2/2] usb: Add CONFIG to fetch string descriptor   Puneet Saxena
• [U-Boot] [PATCH v3] AVR32: fix timer_init() function   Sven Schnelle
• [U-Boot] [PATCH v5 4/7] arm, arm926ejs: Do not clear the V bit on DA850 SoCs   Heiko Schocher
• [U-Boot] [PATCH v5 1/7] arm, davinci: Add lowlevel_init for SoCs other than DM644X   Heiko Schocher
• [U-Boot] [PATCH v5 2/7] arm, arm926ejs: Do cpu critical inits only for boards that require it   Heiko Schocher
• [U-Boot] [PATCH v5 3/7] arm, arm926ejs: Flush the data cache before disabling it   Heiko Schocher
• [U-Boot] [PATCH v5 4/7] arm, arm926ejs: Do not clear the V bit on DA850 SoCs   Heiko Schocher
• [U-Boot] [PATCH v5 5/7] arm, arm926ejs: Enable icache only if CONFIG_SYS_ICACHE_OFF is not defined   Heiko Schocher
• [U-Boot] [PATCH v5 4/7] arm, arm926ejs: Do not clear the V bit on DA850 SoCs   Heiko Schocher
• [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734   Heiko Schocher
• [U-Boot] [PATCH v2 18/20] tegra: i2c: Add function to find DVC bus   Heiko Schocher
• [U-Boot] http://patchwork.ozlabs.org/patch/136415/ seems to break HUSH parser?   Heiko Schocher
• [U-Boot] [PATCH v3 0/9] tegra: Add I2C driver and associated parts   Heiko Schocher
• [U-Boot] [PATCH v3 0/9] tegra: Add I2C driver and associated parts   Heiko Schocher
• [U-Boot] [PATCH v3 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot   Heiko Schocher
• [U-Boot] [PATCH v3 5/9] tegra: i2c: Add I2C driver   Heiko Schocher
• [U-Boot] [PATCH v3 6/9] tegra: i2c: Initialise I2C on Nvidia boards   Heiko Schocher
• [U-Boot] [PATCH v3 7/9] tegra: i2c: Select I2C ordering for Seaboard   Heiko Schocher
• [U-Boot] [PATCH v3 8/9] tegra: i2c: Select number of controllers for Tegra2 boards   Heiko Schocher
• [U-Boot] [PATCH v3 9/9] tegra: i2c: Enable I2C on Seaboard   Heiko Schocher
• [U-Boot] [PATCH] cam_enc_4xx: Rename 'images' to 'imgs'   Heiko Schocher
• [U-Boot] [PATCH V13 01/12] Add cmd_spl command   Heiko Schocher
• [U-Boot] nand: current mainline show "new" startup output   Heiko Schocher
• [U-Boot] nand: current mainline show "new" startup output   Heiko Schocher
• [U-Boot] [PATCH v2] sh: i2c: Add support I2C controller of SH7734   Heiko Schocher
• [U-Boot] [PATCH] sh: Add bit control functions   Heiko Schocher
• [U-Boot] [PATCH 1/2] command, log: Coding Style cleanup   Heiko Schocher
• [U-Boot] [PATCH 2/2] command, log: print log->v2.con value in the "log info" command   Heiko Schocher
• [U-Boot] [PATCH] mtd, nand: move some printfs to debug output.   Heiko Schocher
• [U-Boot] [PATCH] command, log: print with "log show" a full logbuffer   Heiko Schocher
• [U-Boot] [PATCH 1/2] command, log: Coding Style cleanup   Heiko Schocher
• [U-Boot] [PATCH v2 1/2] cosmetic: command, log: Coding Style cleanup   Heiko Schocher
• [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support   Heiko Schocher
• [U-Boot] [PATCH 1/2] Revert "ARM: AM33XX: Add AM33XX I2C driver support"   Heiko Schocher
• [U-Boot] [PATCH 2/2] Revert "ARM: I2C: I2C Multi byte address support"   Heiko Schocher
• [U-Boot] [PATCH] nand: reinstate lazy bad block scanning   Heiko Schocher
• [U-Boot] [i2c] Pull request   Heiko Schocher
• [U-Boot] Q: Bad bits in Nand Write   Ran Shalit
• [U-Boot] Q: Bad bits in Nand Write   Ran Shalit
• [U-Boot] Atmel spi flash   Ran Shalit
• [U-Boot] powerpc/usb: fix bug of CPU halt when missing USB PHY clock   Liu Shengzhou-B36685
• [U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when missing USB PHY clock   Liu Shengzhou-B36685
• [U-Boot] Fastboot gadget, v2   Sebastian Andrzej Siewior
• [U-Boot] [PATCH] microblaze: avoid interrupt race conditions   Michal Simek
• [U-Boot] [PATCH] microblaze: fix build failure due to undefined reference to `get_ticks'   Michal Simek
• [U-Boot] [PATCH] microblaze: fix build failure due to undefined reference to `get_ticks'   Michal Simek
• [U-Boot] [PATCH] microblaze: avoid interrupt race conditions   Michal Simek
• [U-Boot] Pull request - microblaze   Michal Simek
• [U-Boot] [PATCH 2/8] microblaze: Enable several ethernet driver compilation   Michal Simek
• [U-Boot] [PATCH 4/8] microblaze: Enable TFTP put command   Michal Simek
• [U-Boot] [PATCH 3/8] microblaze: Enable phylib and mii support   Michal Simek
• [U-Boot] [PATCH 6/8] microblaze: Add faked LL_TEMAC driver configuration   Michal Simek
• [U-Boot] [PATCH 8/8] microblaze: ll_temac: export xilinx_ll_temac_eth_init() for evaluation   Michal Simek
• [U-Boot] [PATCH 1/8] net: ll_temac: Add LL TEMAC driver to u-boot   Michal Simek
• [U-Boot] [PREVIEW] LL TEMAC v10 refactored -- for evaluation only   Michal Simek
• [U-Boot] [PATCH] ARM:OMAP+:MMC: Add parameters to MMC init   Jonathan Solnit
• [U-Boot] [PATCH] ARM:OMAP+:MMC: Add parameters to MMC init   Jonathan Solnit
• [U-Boot] [PATCH] ARM:OMAP+:MMC: Add parameters to MMC init   Jonathan Solnit
• [U-Boot] [PATCH] ARM:OMAP+:MMC: Add parameters to MMC init   Jonathan Solnit
• [U-Boot] [PATCH v2] ARM:OMAP+:MMC: Add parameters to MMC init   Jonathan Solnit
• [U-Boot] [PATCH] ARM:OMAP+:MMC: Add parameters to MMC init   Jonathan Solnit
• [U-Boot] [PATCH] ARMv7: OMAP: Add init function for TWL4030 GBPR1 register   Jonathan Solnit
• [U-Boot] [PATCH 00/17] OMAP5: Add the Changes required for OMAP5 ES1.0 silicon.   R Sricharan
• [U-Boot] [PATCH 01/17] OMAP5: clocks: Change clock settings as required for ES1.0 silicon.   R Sricharan
• [U-Boot] [PATCH 02/17] OMAP5: board: Add pinmux data for omap5_evm board.   R Sricharan
• [U-Boot] [PATCH 03/17] omap5: io: Configure the io settings for omap5430 sevm board.   R Sricharan
• [U-Boot] [PATCH 04/17] OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.   R Sricharan
• [U-Boot] [PATCH 05/17] OMAP5: palmas: Configure nominal opp vdd values   R Sricharan
• [U-Boot] [PATCH 06/17] OMAP5: hwinit: Add the missing break statement   R Sricharan
• [U-Boot] [PATCH 07/17] OMAP4/5: Make the silicon revision variable common.   R Sricharan
• [U-Boot] [PATCH 08/17] OMAP5: SRAM: Change the SRAM base address.   R Sricharan
• [U-Boot] [PATCH 09/17] OMAP4/5: Make the sysctrl structure common   R Sricharan
• [U-Boot] [PATCH 10/17] OMAP4/5: device: Add support to get the device type.   R Sricharan
• [U-Boot] [PATCH 11/17] OMAP5: defconfig: Align the defconfig for 5430 ES1.0   R Sricharan
• [U-Boot] [PATCH 12/17] OMAP5: ddr: Change the ddr device name.   R Sricharan
• [U-Boot] [PATCH 13/17] OMAP4/5: emif: Correct the emif power mgt shadow register bit fields.   R Sricharan
• [U-Boot] [PATCH 14/17] arm: omap5: correct boot device mode7 for eMMC   R Sricharan
• [U-Boot] [PATCH 15/17] power: twl6035: add palmas PMIC support   R Sricharan
• [U-Boot] [PATCH 16/17] omap5: pbias ldo9 turn on   R Sricharan
• [U-Boot] [PATCH 17/17] mmc: omap5evm: Add eMMC saveenv support   R Sricharan
• [U-Boot] Luna Pier u-boot addition   Stojsavljevic, Zoran
• [U-Boot] Unable to run scripts with autoscr command   Asif Sulikeri
• [U-Boot] Unable to run scripts with autoscr command   Asif Sulikeri
• [U-Boot] Unable to run scripts with autoscr command   Asif Sulikeri
• [U-Boot] Unable to run scripts with autoscr command   Asif Sulikeri
• [U-Boot] Unable to run scripts with autoscr command   Asif Sulikeri
• [U-Boot] Unable to run scripts with autoscr command   Asif Sulikeri
• [U-Boot] Unable to run scripts with autoscr command   Asif Sulikeri
• [U-Boot] [PATCH] powerpc/mpc8xxx: Fix CONFIG_DDR_RAW_TIMING for two boards   York Sun
• [U-Boot] OMAP USB, beagle-xm fail   T Krishnamoorthy, Balaji
• [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support   T Krishnamoorthy, Balaji
• [U-Boot] [PATCH][v2]powerpc/8xxx:Add MPH controller support in USB device-tree fixup   Tabi Timur-B04825
• [U-Boot] [PATCH 1/2] image: add support for Android's boot image format   Aneesh V
• [U-Boot] [PATCH 1/1] arm: mmc: omap: spl size reduction by removing write/erase ops   Aneesh V
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Aneesh V
• [U-Boot] i.MX5/6 U-Boot: Cache enabling   Aneesh V
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Aneesh V
• [U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms   Aneesh V
• [U-Boot] [RFC PATCH 1/4] ARM: enable Thumb build   Aneesh V
• [U-Boot] [RFC PATCH 2/4] OMAP3+: fix issues with Thumb build   Aneesh V
• [U-Boot] [RFC PATCH 3/4] OMAP3+: Use -march=armv7-a and thereby enable Thumb-2   Aneesh V
• [U-Boot] [RFC PATCH 4/4] OMAP4: enable Thumb build   Aneesh V
• [U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms   Aneesh V
• [U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms   Aneesh V
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Aneesh V
• [U-Boot] [PATCH] OMAP4460: Reduce MPU clock speed from 920 to 700   Aneesh V
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Aneesh V
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Aneesh V
• [U-Boot] [RFC PATCH 1/4] ARM: enable Thumb build   Aneesh V
• [U-Boot] [RFC PATCH 2/4] OMAP3+: fix issues with Thumb build   Aneesh V
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Aneesh V
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Aneesh V
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Aneesh V
• [U-Boot] [RFC PATCH 2/4] OMAP3+: fix issues with Thumb build   Aneesh V
• [U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?   Aneesh V
• [U-Boot] [PATCH 0/4] Enable Thumb build for ARM platforms   Aneesh V
• [U-Boot] [PATCH 1/4] ARM: enable Thumb build   Aneesh V
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Aneesh V
• [U-Boot] [PATCH 3/4] armv7: Use -march=armv7-a and thereby enable Thumb-2   Aneesh V
• [U-Boot] [PATCH 4/4] OMAP4: enable Thumb build   Aneesh V
• [U-Boot] [PATCH] armv7: omap3: leave outer cache enabled   Aneesh V
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Aneesh V
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Aneesh V
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Aneesh V
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Aneesh V
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Aneesh V
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Aneesh V
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Aneesh V
• [U-Boot] [PATCH 2/4] arm: add %function attribute to assembly functions   Aneesh V
• [U-Boot] [PATCH v2 1/5] arm: adapt asm/linkage.h from Linux   Aneesh V
• [U-Boot] [PATCH v2 2/5] armv7: add appropriate headers for assembly functions   Aneesh V
• [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build   Aneesh V
• [U-Boot] [PATCH v2 4/5] armv7: Use -march=armv7-a and thereby enable Thumb-2   Aneesh V
• [U-Boot] [PATCH v2 5/5] OMAP4: enable Thumb build   Aneesh V
• [U-Boot] [PATCH v2 1/5] arm: adapt asm/linkage.h from Linux   Aneesh V
• [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux   Aneesh V
• [U-Boot] [PATCH v3 2/6] armv7: add appropriate headers for assembly functions   Aneesh V
• [U-Boot] [PATCH v3 3/6] ARM: enable Thumb build   Aneesh V
• [U-Boot] [PATCH v3 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2   Aneesh V
• [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__))   Aneesh V
• [U-Boot] [PATCH v3 6/6] OMAP4: enable Thumb build   Aneesh V
• [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__))   Aneesh V
• [U-Boot] [PATCH v3 5/6] omap4+: Avoid using __attribute__ ((__packed__))   Aneesh V
• [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build   Aneesh V
• [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux   Aneesh V
• [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build   Aneesh V
• [U-Boot] [PATCH v3 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2   Aneesh V
• [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build   Aneesh V
• [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build   Aneesh V
• [U-Boot] [PATCH v2 3/5] ARM: enable Thumb build   Aneesh V
• [U-Boot] [PATCH v3 1/6] arm: adapt asm/linkage.h from Linux   Aneesh V
• [U-Boot] Can u-Boot Ran from RAM?   Marek Vasut
• [U-Boot] Can u-Boot Ran from RAM?   Marek Vasut
• [U-Boot] Can u-Boot Ran from RAM?   Marek Vasut
• [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH 2/2] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] Avoiding reload on ARM U-BOOT   Marek Vasut
• [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] Avoiding reload on ARM U-BOOT   Marek Vasut
• [U-Boot] [PATCH 2/2] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH] mx28: fix SPL code to make USB booting work   Marek Vasut
• [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH 1/2] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH] mx28: fix SPL code to make USB booting work   Marek Vasut
• [U-Boot] i.MX5/6 U-Boot: Cache enabling (was: Re: Skipping relocation RAM to RAM, esp. on i.MX6?)   Marek Vasut
• [U-Boot] [PATCH] mx28: fix SPL code to make USB booting work   Marek Vasut
• [U-Boot] [PATCH 2/2] Blackfin: easylogo: add lzma logos   Marek Vasut
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Marek Vasut
• [U-Boot] [PATCH 2/2] Blackfin: easylogo: add lzma logos   Marek Vasut
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Marek Vasut
• [U-Boot] [PATCH] arm: Add option to disable code relocation   Marek Vasut
• [U-Boot] Avoiding reload on ARM U-BOOT   Marek Vasut
• [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH 1/2] v2 i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH V2] mx28: fix SPL code to make USB booting work   Marek Vasut
• [U-Boot] [PATCH 2/4 v3] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH 3/4 v3] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH 4/4 v3] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] Integity validation (checksum) of a squashfs root file system   Marek Vasut
• [U-Boot] [PATCH] Elimintated magic numbers for scratch register addresses   Marek Vasut
• [U-Boot] Integity validation (checksum) of a squashfs root file system   Marek Vasut
• [U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO   Marek Vasut
• [U-Boot] [PATCH] MX28: Fix get_timer() / get_tbclk() issue   Marek Vasut
• [U-Boot] [PATCH 1/2] i.mx28: Added register definitions for DIGCTL registers   Marek Vasut
• [U-Boot] [PATCH 2/2] i.mx28: Replaced magic numbers for scratch register addresses with register definitions   Marek Vasut
• [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL   Marek Vasut
• [U-Boot] [PATCH V3] mx28: fix SPL code to make USB booting work   Marek Vasut
• [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH 4/4] Added NAND flash pin configuration   Marek Vasut
• [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH] MX27: add missing get_tbclk()   Marek Vasut
• [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL   Marek Vasut
• [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL   Marek Vasut
• [U-Boot] [PATCH 1/2] i.MX28: Reformat the DRAM memory configuration data   Marek Vasut
• [U-Boot] [PATCH 2/2] i.MX28: Enable additional DRAM address bits   Marek Vasut
• [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH 1/3] doc: complete, typos   Marek Vasut
• [U-Boot] i.MX5/6 U-Boot: Cache enabling   Marek Vasut
• [U-Boot] [PATCH 5/5] efikamx: Fix CONFIG_SYS_MEMTEST_END   Marek Vasut
• [U-Boot] Formatting bootable SD, freescale platform   Marek Vasut
• [U-Boot] Enabling Cache in SPL - how to speed up booting from SPL   Marek Vasut
• [U-Boot] Password protection of U-Boot command line   Marek Vasut
• [U-Boot] [PATCH] EXYNOS: SMDK5250: Support all 4 UARTs   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q   Marek Vasut
• [U-Boot] i.MX6Q USB host support for mainline Linux (was: Re: [PATCH v2 1/2] usb/ehci: Add USB support for the MX6Q)   Marek Vasut
• [U-Boot] [STATUS] [ARM]   Marek Vasut
• [U-Boot] [STATUS] [ARM]   Marek Vasut
• [U-Boot] [PATCH 1/5] mx31ads: Provide proper range for memtest   Marek Vasut
• [U-Boot] [PATCH] PXA: Remove PXA PCMCIA support   Marek Vasut
• [U-Boot] [v2 1/4] USB: Armada100: Add UTMI PHY interface driver   Marek Vasut
• [U-Boot] [v2 2/4] USB: Armada100: ECHI Driver for Armada100 SOCs   Marek Vasut
• [U-Boot] [v2 3/4] Armada100: gplugD: Add USB command support   Marek Vasut
• [U-Boot] [v2 4/4] Armada100: gplugD: Add FAT & EXT2 command support   Marek Vasut
• [U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs   Marek Vasut
• [U-Boot] USB support in U-boot for MX23EVK board   Marek Vasut
• [U-Boot] USB support in U-boot for MX23EVK board   Marek Vasut
• [U-Boot] M29W256GL + WEIM in uboot   Marek Vasut
• [U-Boot] M29W256GL + WEIM in uboot   Marek Vasut
• [U-Boot] [PATCH] USB: Staticize internal functions   Marek Vasut
• [U-Boot] [PATCH 0/4] USB cleanup   Marek Vasut
• [U-Boot] [PATCH 1/4] USB: Staticize internal functions   Marek Vasut
• [U-Boot] [PATCH 2/4] USB: Separate out USB hub driver   Marek Vasut
• [U-Boot] [PATCH 3/4] USB: Make struct devrequest setup_packet local   Marek Vasut
• [U-Boot] [PATCH 4/4] USB: Staticize usb_storage.c   Marek Vasut
• [U-Boot] [PATCH 2/4] USB: Separate out USB hub driver   Marek Vasut
• [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH] Remove execute permissions from source files   Marek Vasut
• [U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs   Marek Vasut
• [U-Boot] mx6: consolidating and extending anadig/analog/anatop register defs   Marek Vasut
• [U-Boot] [PATCH] Remove execute permissions from source files   Marek Vasut
• [U-Boot] do mx28evk/m28evk start with battery?   Marek Vasut
• [U-Boot] do mx28evk/m28evk start with battery?   Marek Vasut
• [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH v4 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL   Marek Vasut
• [U-Boot] [PATCH] SPEAr: Add ARM relocation support   Marek Vasut
• [U-Boot] [PATCH] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load   Marek Vasut
• [U-Boot] [PATCH] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load   Marek Vasut
• [U-Boot] [PATCH] SPEAr: Add ARM relocation support   Marek Vasut
• [U-Boot] [PATCH v2 0/7] Tidy up ARM link scripts   Marek Vasut
• [U-Boot] [PATCH] SPEAr: Add ARM relocation support   Marek Vasut
• [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH 0/2] i.mx28: Elimintated magic numbers for scratch register addresses   Marek Vasut
• [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup   Marek Vasut
• [U-Boot] [PATCH v2 0/7] Tidy up ARM link scripts   Marek Vasut
• [U-Boot] [PATCH v3 6/7] arm: add a common .lds link script   Marek Vasut
• [U-Boot] [PATCH] ARMV7/Vexpress: add missing get_ticks() and get_tbclk()   Marek Vasut
• [U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734   Marek Vasut
• [U-Boot] [PATCH 1/2] openrisc/bitops: add hweightX defines   Marek Vasut
• [U-Boot] [PATCH 1/2] openrisc/bitops: add hweightX defines   Marek Vasut
• [U-Boot] u-boot for SPEAr1310   Marek Vasut
• [U-Boot] u-boot for SPEAr1310   Marek Vasut
• [U-Boot] u-boot for SPEAr1310   Marek Vasut
• [U-Boot] [RFC} [PATCH] Feature removal due to lack of custodians   Marek Vasut
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Marek Vasut
• [U-Boot] [PATCH 0/7] Set of various i.MX28 patches   Marek Vasut
• [U-Boot] [PATCH 1/7] M28: Fix LCD PINMUX   Marek Vasut
• [U-Boot] [PATCH 2/7] M28: Support for the old M28 SoM v1.0   Marek Vasut
• [U-Boot] [PATCH 3/7] i.MX28: Reformat the DRAM memory configuration data   Marek Vasut
• [U-Boot] [PATCH 4/7] i.MX28: Enable additional DRAM address bits   Marek Vasut
• [U-Boot] [PATCH 5/7] Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8   Marek Vasut
• [U-Boot] [PATCH 6/7] Introducing 8-bit wide register, mx28_register_8   Marek Vasut
• [U-Boot] [PATCH 7/7] Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1 registers   Marek Vasut
• [U-Boot] Deprecation (planned removal) of 'maintainer-less' code   Marek Vasut
• [U-Boot] [PATCH v2 0/3] Enable access to FAT filesystem in an ISO9660 El-Torito volume   Marek Vasut
• [U-Boot] Fastboot gadget, v2   Marek Vasut
• [U-Boot] net: re-enumerating usb-ethernet devices hangs the system   Marek Vasut
• [U-Boot] [PATCH v3 0/16] tegra: Add fdt definitions and USB driver   Marek Vasut
• [U-Boot] [RFC PATCH 0/2] fdt: Deal correctly with alias nodes   Marek Vasut
• [U-Boot] [PATCH] USB: relax usbcore reset timings   Marek Vasut
• [U-Boot] [PATCH] eth: remove usb-ethernet devices before re-enumerating them   Marek Vasut
• [U-Boot] [PATCH] USB: fix USB keyboard polling parameter   Marek Vasut
• [U-Boot] [PATCH] usb: add numeric keypad support to HID driver   Marek Vasut
• [U-Boot] [PATCH] ARM: omap3: temporary disable USB on TAM3517 boards   Marek Vasut
• [U-Boot] [PATCH] USB: move keyboard polling into kbd driver   Marek Vasut
• [U-Boot] [PATCH] USB: reevaluate iomux stdin on USB kbd detect   Marek Vasut
• [U-Boot] [PATCH]powerpc/8xxx:Add MPH controller support in USB device-tree fixup   Marek Vasut
• [U-Boot] [PATCH 1/3] USB: Armada100: Add UTMI PHY interface driver   Marek Vasut
• [U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when missing USB PHY clock   Marek Vasut
• [U-Boot] [PATCH v2 0/4] Clean up ehci-omap and extend support for omap3/4 socs   Marek Vasut
• [U-Boot] [PATCH v5 0/18] tegra: Add fdt definitions and USB driver   Marek Vasut
• [U-Boot] [PATCH] usb: musb: fix printf warning   Marek Vasut
• [U-Boot] [PATCH v6 10/18] tegra: usb: fdt: Add additional device tree definitions for USB ports   Marek Vasut
• [U-Boot] [PATCH]powerpc/8xxx: Cleanup USB device-tree fixup   Marek Vasut
• [U-Boot] Deprecation (planned removal) of 'maintainer-less' code   Marek Vasut
• [U-Boot] [PATCH] usb: musb: fix printf warning   Marek Vasut
• [U-Boot] [PATCH] Enable high speed support for USB device framework and usbtty   Marek Vasut
• [U-Boot] [PATCH] PXA: Fix warning in zipitz2   Marek Vasut
• [U-Boot] [PATCH] PXA: Fix missing get_tbclk() breaking vpac boards   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa / fix   Marek Vasut
• [U-Boot] [PATCH] AVR32 removal due to lack of custodian.   Marek Vasut
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Marek Vasut
• [U-Boot] [PATCH] usb: musb: fix printf warning   Marek Vasut
• [U-Boot] [PATCH v3 0/16] tegra: Add fdt definitions and USB driver   Marek Vasut
• [U-Boot] [PATCH] AVR32 removal due to lack of custodian.   Marek Vasut
• [U-Boot] [PATCH] USB: relax usbcore reset timings   Marek Vasut
• [U-Boot] [PATCH v2 0/4] Clean up ehci-omap and extend support for omap3/4 socs   Marek Vasut
• [U-Boot] [PATCH] ARM: omap3: temporary disable USB on TAM3517 boards   Marek Vasut
• [U-Boot] [PATCH]powerpc/8xxx:Add MPH controller support in USB device-tree fixup   Marek Vasut
• [U-Boot] [PATCH v2 0/4] Clean up ehci-omap and extend support for omap3/4 socs   Marek Vasut
• [U-Boot] [RFC PATCH 0/2] fdt: Deal correctly with alias nodes   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa / fix   Marek Vasut
• [U-Boot] [PATCH v5 0/18] tegra: Add fdt definitions and USB driver   Marek Vasut
• [U-Boot] [PATCH 00/14] Nokia RX-51 support   Marek Vasut
• [U-Boot] ARM: Update mach-types   Marek Vasut
• [U-Boot] ARM: Update mach-types   Marek Vasut
• [U-Boot] [PATCH] USB: reevaluate iomux stdin on USB kbd detect   Marek Vasut
• [U-Boot] [PATCH] Enable high speed support for USB device framework and usbtty   Marek Vasut
• [U-Boot] [PATCH v3 2/2] usb: Add CONFIG to fetch string descriptor   Marek Vasut
• [U-Boot] [PATCH v3 1/2] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] [PATCH 01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa / fix   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb: align buffers at cacheline   Marek Vasut
• [U-Boot] Fastboot gadget, v2   Marek Vasut
• [U-Boot] ARM ld: .bss overlaps section .rel.dyn   Amit Virdi
• [U-Boot] ARM ld: .bss overlaps section .rel.dyn   Amit Virdi
• [U-Boot] ARM ld: .bss overlaps section .rel.dyn   Amit Virdi
• [U-Boot] ARM ld: .bss overlaps section .rel.dyn   Amit Virdi
• [U-Boot] ARM ld: .bss overlaps section .rel.dyn   Amit Virdi
• [U-Boot] [PATCH] ARM: Convert spear3xx and spear6xx boards to boards.cfg   Amit Virdi
• [U-Boot] ARM926: U-Boot crash while relocating   Amit Virdi
• [U-Boot] [PATCH] SPEAr: Add ARM relocation support   Amit Virdi
• [U-Boot] [PATCH 0/4] USB: Add support for designware UDC   Amit Virdi
• [U-Boot] [PATCH 1/4] USB:gadget:designware USB device controller (UDC) implementation   Amit Virdi
• [U-Boot] [PATCH 2/4] USB:gadget:designware Device controller bugfixes   Amit Virdi
• [U-Boot] [PATCH 3/4] USB:gadget:designware Support high speed   Amit Virdi
• [U-Boot] [PATCH 4/4] USB:gadget:designware Fix memory nonalignment issue   Amit Virdi
• [U-Boot] [PATCH] SPEAr: Add ARM relocation support   Amit Virdi
• [U-Boot] ARM926: U-Boot crash while relocating   Amit Virdi
• [U-Boot] [PATCH] SPEAr: Add ARM relocation support   Amit Virdi
• [U-Boot] [PATCH] SPEAr: Add ARM relocation support   Amit Virdi
• [U-Boot] [PATCH 0/4] USB: Add support for designware UDC   Amit Virdi
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Amit Virdi
• [U-Boot] [PATCH] usbtty: adapt buffers for large packet support   Amit Virdi
• [U-Boot] [PATCH 00/11] mtd/SMI: Add support for ST SMI controller   Amit Virdi
• [U-Boot] [PATCH 01/11] st_smi: Add support for SPEAr SMI driver   Amit Virdi
• [U-Boot] [PATCH 02/11] st_smi: Remove compilation warning   Amit Virdi
• [U-Boot] [PATCH 03/11] st_smi: Return error in case TFF is not set   Amit Virdi
• [U-Boot] [PATCH 04/11] st_smi: Change SMI timeout values   Amit Virdi
• [U-Boot] [PATCH 05/11] st_smi: Enhance the error handling   Amit Virdi
• [U-Boot] [PATCH 06/11] st_smi: Read status until timeout happens   Amit Virdi
• [U-Boot] [PATCH 07/11] st_smi: Move status register read before modifying ctrl register   Amit Virdi
• [U-Boot] [PATCH 08/11] st_smi: Fix smi read status   Amit Virdi
• [U-Boot] [PATCH 09/11] st_smi: Removed no needed dependency on ST_M25Pxx_ID   Amit Virdi
• [U-Boot] [PATCH 10/11] st_smi: Change the flash probing method   Amit Virdi
• [U-Boot] [PATCH 11/11] st_smi: Fix bug in flash_print_info()   Amit Virdi
• [U-Boot] [PATCH] i2c: Add support for designware i2c controller   Amit Virdi
• [U-Boot] [PATCH] ARM: Define change_bit routine   Amit Virdi
• [U-Boot] [PATCH] Enable high speed support for USB device framework and usbtty   Amit Virdi
• [U-Boot] [PATCH 0/3] mtd/NAND: Support for FSMC controller   Amit Virdi
• [U-Boot] [PATCH 1/3] mtd/NAND: Add FSMC driver support   Amit Virdi
• [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface   Amit Virdi
• [U-Boot] [PATCH 3/3] mtd/NAND: Remove obsolete SPEAr specific NAND drivers   Amit Virdi
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Amit Virdi
• [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface   Amit Virdi
• [U-Boot] [PATCH] ARM: Define change_bit routine   Amit Virdi
• [U-Boot] [PATCH 03/11] st_smi: Return error in case TFF is not set   Amit Virdi
• [U-Boot] [PATCH] Enable high speed support for USB device framework and usbtty   Amit Virdi
• [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface   Amit Virdi
• [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface   Amit Virdi
• [U-Boot] [PATCH] USB:host: Attribute packed removed from usb structures   Amit Virdi
• [U-Boot] [PATCH 0/7] net/designware: Bug fixes   Amit Virdi
• [U-Boot] [PATCH 1/7] net/designware: Fix to restore hw mac address   Amit Virdi
• [U-Boot] [PATCH 2/7] net/designware: Fix the max frame length size   Amit Virdi
• [U-Boot] [PATCH 3/7] net/designware: Phy address fix   Amit Virdi
• [U-Boot] [PATCH 4/7] net/designware: Consecutive writes must have delay   Amit Virdi
• [U-Boot] [PATCH 5/7] net/designware: Try configuring phy on each dw_eth_init   Amit Virdi
• [U-Boot] [PATCH 6/7] net/designware: Program phy registers when auto-negotiation is ON   Amit Virdi
• [U-Boot] [PATCH 7/7] net/designware: Set ANAR to 0x1e1   Amit Virdi
• [U-Boot] [PATCH v3] arm, arm-kirkwood: disable l2c before linux boot   Prafulla Wadaskar
• [U-Boot] http://patchwork.ozlabs.org/patch/136415/ seems to break HUSH parser?   Prafulla Wadaskar
• [U-Boot] http://patchwork.ozlabs.org/patch/136415/ seems to break HUSH parser?   Prafulla Wadaskar
• [U-Boot] [PATCH] bugfix: all Marvell specific build fails due to undefined reference to `get_ticks'   Prafulla Wadaskar
• [U-Boot] [PATCH] bugfix: all Marvell specific build fails due to undefined reference to `get_ticks'   Prafulla Wadaskar
• [U-Boot] [PATCH 1/2] arm/km: speed up i2c access for keymile boards   Prafulla Wadaskar
• [U-Boot] [PATCH V2] bugfix: all Marvell specific build fails due to undefined reference to `get_ticks'   Prafulla Wadaskar
• [U-Boot] [PATCH v4] arm, arm-kirkwood: disable l2c before linux boot   Prafulla Wadaskar
• [U-Boot] [PATCH V2] edminiv2: add hush parser, cmdline editing and long help   Prafulla Wadaskar
• [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2   Prafulla Wadaskar
• [U-Boot] [PATCH] kirkwood: add support for D-Link DNS-325   Prafulla Wadaskar
• [U-Boot] [PATCH] kirkwood_spi: correct access to irq_mask register   Prafulla Wadaskar
• [U-Boot] Pull request for u-boot-marvell.git   Prafulla Wadaskar
• [U-Boot] [PATCH V2] bugfix: all Marvell specific build fails due to undefined reference to `get_ticks'   Prafulla Wadaskar
• [U-Boot] [PATCH V2] bugfix: all Marvell specific build fails due to undefined reference to `get_ticks'   Prafulla Wadaskar
• [U-Boot] Marvell Alaska Phy loopback mode support using RGMII interface   Prafulla Wadaskar
• [U-Boot] [v2 4/4] Armada100: gplugD: Add FAT & EXT2 command support   Prafulla Wadaskar
• [U-Boot] [PATCH] ARM: dreamplug: Enable FDT support   Prafulla Wadaskar
• [U-Boot] [PATCHv5 1/7] mkenvimage: correct and clarify comments and error messages   David Wagner
• [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed   Bernhard Walle
• [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed   Bernhard Walle
• [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed   Bernhard Walle
• [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed   Bernhard Walle
• [U-Boot] [PATCH v3] arm, arm-kirkwood: disable l2c before linux boot   Michael Walle
• [U-Boot] [PATCH v4] arm, arm-kirkwood: disable l2c before linux boot   Michael Walle
• [U-Boot] [PATCH 1/2] Add run_command_list() to run a list of commands   Michael Walle
• [U-Boot] [PATCH v4 4/9] Stop using builtin_run_command()   Michael Walle
• [U-Boot] [PATCH 1/2] Add run_command_list() to run a list of commands   Michael Walle
• [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl   Michael Walle
• [U-Boot] exports.h and the GPL   Michael Walle
• [U-Boot] exports.h and the GPL   Michael Walle
• [U-Boot] Please pick up pending Integrator patches   Linus Walleij
• [U-Boot] [PATCH] integrator: rewrite the AP PCI driver   Linus Walleij
• [U-Boot] [PATCH] ARMV7/Vexpress: add missing get_ticks() and get_tbclk()   Liming Wang
• [U-Boot] [PATCH v5 08/18] tegra: fdt: Add additional USB binding   Stephen Warren
• [U-Boot] [PATCH v5 10/18] tegra: usb: fdt: Add additional device tree definitions for USB ports   Stephen Warren
• [U-Boot] [PATCH v5 18/18] tegra: fdt: Enable FDT support for Seaboard   Stephen Warren
• [U-Boot] [PATCH v6 11/18] tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard   Stephen Warren
• [U-Boot] [PATCH v6 10/18] tegra: usb: fdt: Add additional device tree definitions for USB ports   Stephen Warren
• [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard   Stephen Warren
• [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard   Stephen Warren
• [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard   Stephen Warren
• [U-Boot] [PATCH v6 09/20] tegra: fdt: Add additional USB binding   Stephen Warren
• [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard   Stephen Warren
• [U-Boot] [PATCH v6 15/20] tegra: fdt: Add function to return peripheral/clock ID   Stephen Warren
• [U-Boot] [PATCH v6 0/20] tegra: Add fdt definitions and USB driver   Stephen Warren
• [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard   Stephen Warren
• [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard   Stephen Warren
• [U-Boot] [PATCH v6 15/20] tegra: fdt: Add function to return peripheral/clock ID   Stephen Warren
• [U-Boot] [PATCH v6 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard   Stephen Warren
• [U-Boot] [PATCH v7 09/20] tegra: fdt: Add additional USB binding   Stephen Warren
• [U-Boot] [PATCH v7 11/20] tegra: fdt: Add clock bindings for Tegra2 Seaboard   Stephen Warren
• [U-Boot] [PATCH v7 15/20] tegra: fdt: Add function to return peripheral/clock ID   Stephen Warren
• [U-Boot] [PATCH v7 09/20] tegra: fdt: Add additional USB binding   Stephen Warren
• [U-Boot] [PATCH v6 15/20] tegra: fdt: Add function to return peripheral/clock ID   Stephen Warren
• [U-Boot] [PATCH v6 15/20] tegra: fdt: Add function to return peripheral/clock ID   Stephen Warren
• [U-Boot] [PATCH v4 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot   Stephen Warren
• [U-Boot] [PATCH v4 5/9] tegra: i2c: Add I2C driver   Stephen Warren
• [U-Boot] [PATCH v4 7/9] tegra: i2c: Select I2C ordering for Seaboard   Stephen Warren
• [U-Boot] [PATCH v4 4/9] tegra: fdt: i2c: Add extra I2C bindings for U-Boot   Stephen Warren
• [U-Boot] [PATCH] Tegra: mmc: Fixed handling of interrupts in timeouts.   Tom Warren
• [U-Boot] [PATCH v3 0/9] tegra: Add I2C driver and associated parts   Tom Warren
• [U-Boot] [PATCH v3 3/9] tegra: Enhance clock support to handle 16-bit clock divisors   Tom Warren
• [U-Boot] [PATCH] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load   Tom Warren
• [U-Boot] [PATCH] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load   Tom Warren
• [U-Boot] [PATCH] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load   Tom Warren
• [U-Boot] [PATCH v2] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load   Tom Warren
• [U-Boot] [PATCH] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load   Tom Warren
• [U-Boot] [PATCH 2/2] usb: Add quirk "USB_QUIRK_STRING_FETCH_255"   Tom Warren
• [U-Boot] [PATCH v2] arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load   Tom Warren
• [U-Boot] [RFC PATCH 0/2] fdt: Deal correctly with alias nodes   Tom Warren
• [U-Boot] [PATCH v5 0/18] tegra: Add fdt definitions and USB driver   Tom Warren
• [U-Boot] [PATCH] Tricorder: Fix boot after making software ecc configurable   Thomas Weber
• [U-Boot] [PATCH] Tricorder: Store ecc data on stack   Thomas Weber
• [U-Boot] [PATCH] Tricorder: Switch env to generic mmc driver   Thomas Weber
• [U-Boot] [PATCH] OMAP3: Remove unused CONFIG_SYS_NAND_ECCSTEPS/TOTAL   Thomas Weber
• [U-Boot] [PATCH] Remove execute permissions from source files   Thomas Weber
• [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support   Thomas Weber
• [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support   Thomas Weber
• [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support   Thomas Weber
• [U-Boot] [PATCH V13 04/12] devkit8000/spl: init GPMC for dm9000 in SPL   Thomas Weber
• [U-Boot] [PATCH V13 01/12] Add cmd_spl command   Thomas Weber
• [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support   Thomas Weber
• [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support   Thomas Weber
• [U-Boot] [PATCH v2 2/2] davinci: add support for printing clock frequency   Laurence Withers
• [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support   Scott Wood
• [U-Boot] flash post test   Scott Wood
• [U-Boot] flash post test   Scott Wood
• [U-Boot] Does U-boot support ASLR?   Scott Wood
• [U-Boot] Does U-boot support ASLR?   Scott Wood
• [U-Boot] Build u-Boot for NAND boot on i.MX53x platform   Scott Wood
• [U-Boot] Configuration settings for Freescale i.MX53x demo boards   Scott Wood
• [U-Boot] nand: current mainline show "new" startup output   Scott Wood
• [U-Boot] [PATCH] Tricorder: Fix boot after making software ecc configurable   Scott Wood
• [U-Boot] [PATCH] Revert "nand: make 1-bit software ECC configurable"   Scott Wood
• [U-Boot] [PATCH] Tricorder: Fix boot after making software ecc configurable   Scott Wood
• [U-Boot] nand: current mainline show "new" startup output   Scott Wood
• [U-Boot] Q: Bad bits in Nand Write   Scott Wood
• [U-Boot] [PATCH] nand: reinstate lazy bad block scanning   Scott Wood
• [U-Boot] [PATCH] [v2] mtd/nand: Fix IFC driver to support 2K NAND page   Scott Wood
• [U-Boot] [PATCH] mtd/nand:Fix wrong usage of is_blank() in fsl_ifc_run_command   Scott Wood
• [U-Boot] [PATCH v2] MAKEALL: display SPL size if present   Scott Wood
• [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface   Scott Wood
• [U-Boot] [PATCH] cmd_nand.c: Fix 'nand dump' after latest MTD resync   Scott Wood
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] [PATCH v4 07/13] davinci: Use correct #ifdef around gdata/bdata   Scott Wood
• [U-Boot] Nand dump and nand bad block disagree   Scott Wood
• [U-Boot] [PATCH 2/3] SPEAr: Configure FSMC driver for NAND interface   Scott Wood
• [U-Boot] Nand dump and nand bad block disagree   Scott Wood
• [U-Boot] Nand dump and nand bad block disagree   Scott Wood
• [U-Boot] Broken ecc.size when switching between sw and hw ecc (beagleboard)   Scott Wood
• [U-Boot] Nand dump and nand bad block disagree   Scott Wood
• [U-Boot] [PATCH 1/2] powerpc/p2041rdb: add NAND and NAND boot support   Shaohui Xie
• [U-Boot] [PATCH 2/2] powerpc/p2041rdb: add env in NAND support   Shaohui Xie
• [U-Boot] [PATCH V4] AT91: pio: Add PIO3 features   Hong Xu
• [U-Boot] [PATCH 1/3 v8] arm926ejs: add NXP LPC32x0 cpu series support   Vladimir Zapolskiy
• [U-Boot] hush saveenv problem   Alex Zeffertt
• [U-Boot] [PATCH] mcx: Enable command line editing   Detlev Zundel
• [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed   Detlev Zundel
• [U-Boot] [PATCH 1/2] command, log: Coding Style cleanup   Detlev Zundel
• [U-Boot] [PATCH 2/2] command, log: print log->v2.con value in the "log info" command   Detlev Zundel
• [U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed   Detlev Zundel
• [U-Boot] [PATCH] command, log: print with "log show" a full logbuffer   Detlev Zundel
• [U-Boot] Unable to run scripts with autoscr command   Detlev Zundel
• [U-Boot] udc usb driver in imx-uboot   alex
• [U-Boot] U-boot environment variables keep disappearing   andyjjones
• [U-Boot] [PATCH] imximage: header v2: Remove overwriting of flash_offset   stefano babic
• [U-Boot] fsl_esdhc.c: eMMC 4.4 support?   stefano babic
• [U-Boot] ARM: Update mach-types   stefano babic
• [U-Boot] [PATCH] mx31: Setup AIPS registers   stefano babic
• [U-Boot] how to controll pixel clock   siddharth baisane
• [U-Boot] [PATCH 1/4 v3] i.MX28: Fix ref_cpu clock setup   robert at delien.nl
• [U-Boot] [PATCH 2/4 v3] i.MX28: Fix ref_cpu clock setup   robert at delien.nl
• [U-Boot] [PATCH 3/4 v3] i.MX28: Fix ref_cpu clock setup   robert at delien.nl
• [U-Boot] [PATCH 4/4 v3] i.MX28: Fix ref_cpu clock setup   robert at delien.nl
• [U-Boot] [PATCH] i.MX28: digctrl registers added   robert at delien.nl
• [U-Boot] [PATCH] Elimintated magic numbers for scratch register addresses   robert at delien.nl
• [U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup   robert at delien.nl
• [U-Boot] [PATCH 1/4 v4] Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8   robert at delien.nl
• [U-Boot] [PATCH 2/4 v4] Introducing 8-bit wide register, mx28_register_8   robert at delien.nl
• [U-Boot] [PATCH 3/4 v4] Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1 registers   robert at delien.nl
• [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL   robert at delien.nl
• [U-Boot] [PATCH 0/2] i.mx28: Elimintated magic numbers for scratch register addresses   robert at delien.nl
• [U-Boot] [PATCH 1/2] i.mx28: Added register definitions for DIGCTL registers   robert at delien.nl
• [U-Boot] [PATCH 2/2] i.mx28: Replaced magic numbers for scratch register addresses with register definitions   robert at delien.nl
• [U-Boot] [PATCH 0/4] i.MX28: Small correction to pin configuration   robert at delien.nl
• [U-Boot] [PATCH 1/4] Debug UART pins configured to 3v3, instead of 1v8   robert at delien.nl
• [U-Boot] [PATCH 2/4] Correction to SSP0 drive strengths   robert at delien.nl
• [U-Boot] [PATCH 3/4] SSP1 pins configured for MMC1   robert at delien.nl
• [U-Boot] [PATCH 4/4] Added NAND flash pin configuration   robert at delien.nl
• [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup   Robert at domain.unknown
• [U-Boot] [PATCH 1/4 v5] Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8   Robert at domain.unknown
• [U-Boot] [PATCH 2/4 v5] Introducing 8-bit wide register, mx28_register_8   Robert at domain.unknown
• [U-Boot] [PATCH 3/4 v5] Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1 registers   Robert at domain.unknown
• [U-Boot] [PATCH 4/4 v5] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL   Robert at domain.unknown
• [U-Boot] Nand dump and nand bad block disagree   jean-philippe francois
• [U-Boot] Nand dump and nand bad block disagree   jean-philippe francois
• [U-Boot] [PATCH 1/2] Revert "ARM: AM33XX: Add AM33XX I2C driver support"   tom.rini at gmail.com
• [U-Boot] [PATCH 2/2] Revert "ARM: I2C: I2C Multi byte address support"   tom.rini at gmail.com
• [U-Boot] [PATCH] cfi: fix the incomplete erased status check in buffer write   htbegin
• [U-Boot] Memory testing of flash   vaibhav kothari
• [U-Boot] flash post test   vaibhav kothari
• [U-Boot] flash post test   vaibhav kothari
• [U-Boot] ARM ld: .bss overlaps section .rel.dyn   viresh kumar
• [U-Boot] do mx28evk/m28evk start with battery?   lau
• [U-Boot] do mx28evk/m28evk start with battery?   lau
• [U-Boot] [PATCH 0/5] Support for qualcomm msm7630 board   mohamed.haneef at lntinfotech.com
• [U-Boot] [PATCH 1/5] msm7x30: Add support for low speed uart on msm7x30   mohamed.haneef at lntinfotech.com
• [U-Boot] [PATCH 2/5] msm7x30: Add support for interprocessor communication   mohamed.haneef at lntinfotech.com
• [U-Boot] [PATCH 3/5] msm7x30: Add support for Qualcomm msm7630 soc   mohamed.haneef at lntinfotech.com
• [U-Boot] [PATCH 4/5] Add support for mmc read and writes   mohamed.haneef at lntinfotech.com
• [U-Boot] [PATCH 5/5] msm7x30: Add support for msm7630_surf board   mohamed.haneef at lntinfotech.com
• [U-Boot] [PATCH 2/2] usb: Add quirk "USB_QUIRK_STRING_FETCH_255"   puneets
• [U-Boot] [PATCH 1/2] usb: align buffers at cacheline   puneets
• [U-Boot] [PATCH 1/2] usb: align buffers at cacheline   puneets
• [U-Boot] [PATCH v2 1/2] usb: align buffers at cacheline   puneets
• [U-Boot] [U-Boot-Users]-boot monitor function   periyasamy samy
• [U-Boot] Marvell Alaska Phy loopback mode support using RGMII interface   amruth vamadev
• [U-Boot] [PATCH] ARMV7/Vexpress: add missing get_ticks() and get_tbclk()   walimis
• [U-Boot] [PATCH resend] ARMV7/Vexpress: add missing get_ticks() and get_tbclk()   walimis
• [U-Boot] Avoiding reload on ARM U-BOOT   yehuda80
• [U-Boot] Avoiding reload on ARM U-BOOT   yehuda yitchak
• [U-Boot] IPv6 Support in U-BOOT   yehuda yitchak
• [U-Boot] IPv6 Support in U-BOOT   yehuda yitchak
• [U-Boot] [PATCH] microblaze: fix build failure due to undefined reference to `get_ticks'   Michal Šimek