[U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO

[Bud Miljkovic]

Hi Stefano,

I cloned from http://git.denx.de/u-boot-imx.git into local directory
"/home/budm/Mamaku-Boot/". Then configured for mx53loco_config without a
problem but the make failed.

I am using the same tools as the previous case when I was successful in
building but could not get it to run, etc.

The command line I use is: make ARCH=arm CROSS_COMPILE=arm-none-eabi-
u-boot.imx

I am attaching two log files: 

	1. bould.log 		- containing all output just before the
error
	2. build_failure.log	- containing the error output

Any suggestion is appreciated.

-bud

-----Original Message-----
From: Stefano Babic [mailto:sbabic at denx.de] 
Sent: Friday, 3 February 2012 7:30 p.m.
To: Bud Miljkovic
Cc: Jason Liu; sbabic at denx.de; u-boot at lists.denx.de
Subject: Re: [U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale
MX53LOCO

On 03/02/2012 06:58, Jason Liu wrote:
Hi Bud,

>> I have cloned yesterday http://git.denx.de/u-boot.git on to my local
>> machine and from there selected the v2011.12-rc3 tag.  Then I
configured
>> the mx53loco board and successfully build u-boot.imx, copied the
image
>> to a SD card and powered it up.  What I then got on the serial port
>> terminal was as follows:

> I have fixed this issue by a recent commit which is queened in
> u-boot-imx and you can refer to
> the patch here: http://patchwork.ozlabs.org/patch/138761/
> 

You can also clone from http://git.denx.de/u-boot-imx.git, Jason's patch
was already merged.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
-------------- next part --------------
A non-text attachment was scrubbed...
Name: build.log
Type: application/octet-stream
Size: 62104 bytes
Desc: build.log
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120207/fdd4086b/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: build_failure.log
Type: application/octet-stream
Size: 2353 bytes
Desc: build_failure.log
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120207/fdd4086b/attachment-0001.obj>