[U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO

[Stefano Babic]

On 03/02/2012 06:58, Jason Liu wrote:
Hi Bud,

>> I have cloned yesterday http://git.denx.de/u-boot.git on to my local
>> machine and from there selected the v2011.12-rc3 tag.  Then I configured
>> the mx53loco board and successfully build u-boot.imx, copied the image
>> to a SD card and powered it up.  What I then got on the serial port
>> terminal was as follows:

> I have fixed this issue by a recent commit which is queened in
> u-boot-imx and you can refer to
> the patch here: http://patchwork.ozlabs.org/patch/138761/
> 

You can also clone from http://git.denx.de/u-boot-imx.git, Jason's patch
was already merged.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================