[U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO

[Jason Liu]

Bud,

2012/2/3 Bud Miljkovic <Bud_Miljkovic at trimble.com>:
> Hi Stefano,
>
>
>
> I have cloned yesterday http://git.denx.de/u-boot.git on to my local
> machine and from there selected the v2011.12-rc3 tag.  Then I configured
> the mx53loco board and successfully build u-boot.imx, copied the image
> to a SD card and powered it up.  What I then got on the serial port
> terminal was as follows:
>
>
>
> U-Boot 2011.12-00201-g137703b (Feb 03 2012 - 11:12:00)
>
>
>
> CPU:   Freescale i.MX53 family rev2.1 at 800 MHz
>
> Reset cause: POR
>
> Board: MX53 LOCO
>
> DRAM:  1 GiB
>
> WARNING: Caches not enabled
>
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
>
> *** Warning - bad CRC, using default environment
>
>
>
> In:    serial
>
> Out:   serial
>
> Err:   serial
>
> Net:
>
>
>
> At this point, having printed Net:  the program hags.
>

I have fixed this issue by a recent commit which is queened in
u-boot-imx and you can refer to
the patch here: http://patchwork.ozlabs.org/patch/138761/

Jason
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>