[U-Boot] USB support in U-boot for MX23EVK board

[Wolfgang Denk]

Dear Marek Vasut,

In message <201202131335.42773.marek.vasut at gmail.com> you wrote:
>
> > But usb_init function call is not made in
> > board_init function in the corresponding board specific file
> > (evk23_evk.c). Could you help me finding what could be done for enabling
> > USB support in u-boot to support for ARM based mx23evk board.
> 
> Yes, use the above, for the reference, you can use board/denx/m28evk

...but only as a starting point for a new port. i.MX23 is similar to
i.MX28 in many areas, but sufficiently different to cause enough
problems to a newbie.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
One possible reason that things aren't going  according  to  plan  is
that there never was a plan in the first place.