[U-Boot] [PATCH 1/7] net/designware: Fix to restore hw mac address

[Amit Virdi]

From: Vipin KUMAR <vipin.kumar at st.com>

The network controller mac resets hardware address stored in MAC_HI and MAC_LO
registers if mac is resetted. So, hw mac address needs to be restored in case
mac is explicitly resetted from driver.

Signed-off-by: Vipin Kumar <vipin.kumar at st.com>
Signed-off-by: Amit Virdi <amit.virdi at st.com>
---
 drivers/net/designware.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index 1e34436..754ffae 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -148,6 +148,8 @@ static int dw_eth_init(struct eth_device *dev, bd_t *bis)
 	if (mac_reset(dev) < 0)
 		return -1;
 
+	dw_write_hwaddr(dev);
+
 	writel(FIXEDBURST | PRIORXTX_41 | BURST_16,
 			&dma_p->busmode);
 
@@ -300,8 +302,10 @@ static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val)
 	writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
 
 	do {
-		if (!(readl(&mac_p->miiaddr) & MII_BUSY))
+		if (!(readl(&mac_p->miiaddr) & MII_BUSY)) {
 			ret = 0;
+			break;
+		}
 		udelay(1000);
 	} while (timeout--);
 
-- 
1.7.2.2