[U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup

[Marek Vasut]

> From: Robert Delien <robert at delien.nl>

Why did you repost? Fix that "domain.unknown"

M

> 
> This set of patches fixes ref_cpu clock setup.
> 
> Robert Delien (4):
>   Renamed mx28_register to mx28_register_32 to prepare for
>     mx28_register_8
>   Introducing 8-bit wide register, mx28_register_8
>   Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1
>     registers
>   Preventing needless switching on and off PLL bypass mode, allowing
>     allow single-stepping through the SPL
> 
>  arch/arm/cpu/arm926ejs/mx28/clock.c           |   74 +++-----
>  arch/arm/cpu/arm926ejs/mx28/iomux.c           |    6 +-
>  arch/arm/cpu/arm926ejs/mx28/mx28.c            |    6 +-
>  arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c    |   30 ++--
>  arch/arm/cpu/arm926ejs/mx28/spl_power_init.c  |   24 ---
>  arch/arm/include/asm/arch-mx28/regs-apbh.h    |  254
> ++++++++++++------------ arch/arm/include/asm/arch-mx28/regs-bch.h     |  
> 42 ++--
>  arch/arm/include/asm/arch-mx28/regs-clkctrl.h |   98 ++++------
>  arch/arm/include/asm/arch-mx28/regs-common.h  |   28 ++-
>  arch/arm/include/asm/arch-mx28/regs-gpmi.h    |   26 ++--
>  arch/arm/include/asm/arch-mx28/regs-i2c.h     |   28 ++--
>  arch/arm/include/asm/arch-mx28/regs-ocotp.h   |   86 ++++----
>  arch/arm/include/asm/arch-mx28/regs-pinctrl.h |  168 ++++++++--------
>  arch/arm/include/asm/arch-mx28/regs-power.h   |   28 ++--
>  arch/arm/include/asm/arch-mx28/regs-rtc.h     |   28 ++--
>  arch/arm/include/asm/arch-mx28/regs-ssp.h     |   40 ++--
>  arch/arm/include/asm/arch-mx28/regs-timrot.h  |   38 ++--
>  arch/arm/include/asm/arch-mx28/regs-usbphy.h  |   20 +-
>  arch/arm/include/asm/arch-mx28/sys_proto.h    |   10 +-
>  drivers/gpio/mxs_gpio.c                       |   16 +-
>  drivers/usb/host/ehci-mxs.c                   |    8 +-
>  21 files changed, 507 insertions(+), 551 deletions(-)