[U-Boot] [PATCH v4 7/7] OMAP4: ehci-omap: enable ehci-omap for panda boards

[Govindraj.R]

From: "Govindraj.R" <govindraj.raja at ti.com>

For panda initialise the mux pins for ehci usage and
enable ehci in omap4_panda config file.

Signed-off-by: Govindraj.R <govindraj.raja at ti.com>
---
 board/ti/panda/panda_mux_data.h |   16 ++++++++--------
 include/configs/omap4_panda.h   |   23 ++++++++++++++++++++++-
 2 files changed, 30 insertions(+), 9 deletions(-)

diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h
index 2970ccd..5b66a14 100644
--- a/board/ti/panda/panda_mux_data.h
+++ b/board/ti/panda/panda_mux_data.h
@@ -136,14 +136,14 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
 	{CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},		/* cam_shutter */
 	{CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},		/* cam_strobe */
 	{CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_83 */
-	{USBB1_ULPITLL_CLK, (IEN | OFF_EN | OFF_IN | M1)},		/* hsi1_cawake */
-	{USBB1_ULPITLL_STP, (IEN | OFF_EN | OFF_IN | M1)},		/* hsi1_cadata */
-	{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_IN | M1)},		/* hsi1_caflag */
-	{USBB1_ULPITLL_NXT, (OFF_EN | M1)},				/* hsi1_acready */
-	{USBB1_ULPITLL_DAT0, (OFF_EN | M1)},				/* hsi1_acwake */
-	{USBB1_ULPITLL_DAT1, (OFF_EN | M1)},				/* hsi1_acdata */
-	{USBB1_ULPITLL_DAT2, (OFF_EN | M1)},				/* hsi1_acflag */
-	{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_IN | M1)},		/* hsi1_caready */
+	{USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
+	{USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)},		/* usbb1_ulpiphy_stp */
+	{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dir */
+	{USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_nxt */
+	{USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat0 */
+	{USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat1 */
+	{USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat2 */
+	{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat3 */
 	{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat4 */
 	{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat5 */
 	{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat6 */
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index 416eb39..b4756be 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -31,12 +31,33 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_PANDA		1	/* working with Panda */
+#define CONFIG_PANDA	/* working with Panda */
+
+/* USB UHH support options */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_HOST
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
+#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62
+
+/* USB Networking options */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
+#define CONFIG_UBOOT_ENABLE_PADS_ALL
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
 
 #define CONFIG_USB_ULPI
 #define CONFIG_USB_ULPI_VIEWPORT_OMAP
 
 #include <configs/omap4_common.h>
+#define CONFIG_CMD_NET
 
 /* GPIO */
 #define CONFIG_CMD_GPIO
-- 
1.7.5.4