[U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
albert.u.boot at aribaud.net
Sun Feb 12 10:10:57 CET 2012
Hi Tom,
Le 10/02/2012 23:56, Tom Rini a écrit :
> Hello,
>
> The following changes since commit ca849aa4b86b282f837c58a0b129460ebfad2239:
> David Müller (ELSOFT AG) (1):
> ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-ti.git master
>
> Aneesh V (1):
> OMAP4460: Reduce MPU clock speed from 920 to 700
>
> Christian Riesch (5):
> arm, davinci: Add lowlevel_init for SoCs other than DM644X
> arm, arm926ejs: Do cpu critical inits only for boards that require it
> arm, arm926ejs: Add option CONFIG_SYS_EXCEPTION_VECTORS_HIGH
> arm, arm926ejs: Enable icache only if CONFIG_SYS_ICACHE_OFF is not defined
> arm, davinci: Add support for the Calimain board from OMICRON electronics
>
> Govindraj.R (6):
> usb: ulpi: Extend the existing ulpi framework.
> usb: ulpi: Add omap-ulpi-view port support
> ehci-omap: Clean up added ehci-omap.c
> OMAP3+: Clock: Adding ehci clock enabling
> OMAP4: clock-common: Move the usb dppl configuration to new func
> OMAP4: ehci-omap: enable ehci-omap for panda boards
>
> Hadli, Manjunath (2):
> davinci: remove macro CONFIG_DISPLAY_CPUINFO
> davinci: add support for printing clock frequency
>
> Ilya Yanok (2):
> ehci-omap: driver for EHCI host on OMAP3
> mcx: support for HTKW mcx board
>
> Peter Barada (2):
> omap3logic: Add missing GPMC pinmux for LAN92xx access
> ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition
>
> Peter Meerwald (3):
> beagle: fix typos
> omap3: fix comment typos
> doc: fix typos
>
> Schuyler Patton (1):
> AM3517: Changed default clock rate for AM3517
>
> Stefano Babic (2):
> OMAP3: TAM3517: update ehci interface
> ARM: omap3: Added Teejet mt_ventoux
>
> Sughosh Ganu (2):
> arm, arm926ejs: Flush the data cache before disabling it
> Changes to move hawkboard to the new spl infrastructure
>
> MAINTAINERS | 10 +
> README | 6 +
> arch/arm/cpu/arm926ejs/davinci/cpu.c | 76 ++--
> arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 24 +-
> arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S | 4 +
> arch/arm/cpu/arm926ejs/davinci/spl.c | 4 +-
> arch/arm/cpu/arm926ejs/start.S | 28 +-
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 54 ++-
> arch/arm/cpu/armv7/omap3/board.c | 8 +-
> arch/arm/cpu/armv7/omap3/clock.c | 20 +
> arch/arm/cpu/armv7/omap4/clocks.c | 27 +-
> arch/arm/include/asm/arch-davinci/da850_lowlevel.h | 9 +
> arch/arm/include/asm/arch-omap3/clocks_omap3.h | 2 +-
> .../asm/arch-omap3/{ehci_omap3.h => ehci.h} | 45 +--
> arch/arm/include/asm/arch-omap3/mem.h | 57 ++--
> arch/arm/include/asm/arch-omap3/sys_proto.h | 1 +
> arch/arm/include/asm/arch-omap4/ehci.h | 49 +++
> arch/arm/include/asm/ehci-omap.h | 142 +++++++
> arch/arm/include/asm/u-boot.h | 3 +
> arch/arm/lib/board.c | 10 +-
> board/davinci/da8xxevm/da850evm.c | 4 +-
> board/davinci/da8xxevm/hawkboard.c | 23 +
> board/davinci/da8xxevm/hawkboard_nand_spl.c | 115 ------
> .../{u-boot-spl.lds => u-boot-spl-da850evm.lds} | 0
> .../davinci/da8xxevm/u-boot-spl-hawk.lds | 22 +-
> board/efikamx/efikamx-usb.c | 24 +-
> board/enbw/enbw_cmc/enbw_cmc.c | 13 +-
> board/htkw/mcx/Makefile | 38 ++
> board/htkw/mcx/mcx.c | 112 +++++
> board/htkw/mcx/mcx.h | 408 +++++++++++++++++++
> board/logicpd/omap3som/omap3logic.c | 15 +
> board/omicron/calimain/Makefile | 45 ++
> board/omicron/calimain/calimain.c | 188 +++++++++
> board/technexion/twister/twister.c | 22 +
> board/teejet/mt_ventoux/Makefile | 38 ++
> board/teejet/mt_ventoux/mt_ventoux.c | 233 +++++++++++
> board/teejet/mt_ventoux/mt_ventoux.h | 429 ++++++++++++++++++++
> board/ti/beagle/beagle.c | 109 +-----
> board/ti/beagle/beagle.h | 4 +-
> board/ti/panda/panda.c | 38 ++
> board/ti/panda/panda_mux_data.h | 16 +-
> boards.cfg | 4 +-
> common/cmd_bdinfo.c | 9 +
> doc/README.SPL | 4 +-
> doc/README.hawkboard | 43 +-
> doc/README.omap-ulpi-viewport | 27 ++
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ehci-omap.c | 255 ++++++++++++
> drivers/usb/ulpi/Makefile | 1 +
> drivers/usb/ulpi/omap-ulpi-viewport.c | 105 +++++
> drivers/usb/ulpi/ulpi-viewport.c | 32 +-
> drivers/usb/ulpi/ulpi.c | 54 ++--
> include/common.h | 1 +
> include/configs/calimain.h | 363 +++++++++++++++++
> include/configs/cam_enc_4xx.h | 11 +-
> include/configs/da830evm.h | 4 +
> include/configs/da850evm.h | 11 +-
> include/configs/davinci_dm355evm.h | 5 +-
> include/configs/davinci_dm355leopard.h | 5 +-
> include/configs/davinci_dm365evm.h | 4 +
> include/configs/davinci_dm6467Tevm.h | 5 +-
> include/configs/davinci_dm6467evm.h | 5 +-
> include/configs/davinci_dvevm.h | 6 +-
> include/configs/davinci_schmoogie.h | 5 +-
> include/configs/davinci_sffsdr.h | 5 +-
> include/configs/davinci_sonata.h | 5 +-
> include/configs/ea20.h | 4 +
> include/configs/enbw_cmc.h | 11 +-
> include/configs/hawkboard.h | 28 ++-
> include/configs/mcx.h | 378 +++++++++++++++++
> include/configs/mt_ventoux.h | 58 +++
> include/configs/omap3_beagle.h | 8 +
> include/configs/omap4_panda.h | 26 ++-
> include/configs/tam3517-common.h | 6 +-
> include/usb/ulpi.h | 36 ++-
> nand_spl/board/davinci/da8xxevm/Makefile | 155 -------
> 76 files changed, 3496 insertions(+), 659 deletions(-)
> rename arch/arm/include/asm/arch-omap3/{ehci_omap3.h => ehci.h} (51%)
> create mode 100644 arch/arm/include/asm/arch-omap4/ehci.h
> create mode 100644 arch/arm/include/asm/ehci-omap.h
> delete mode 100644 board/davinci/da8xxevm/hawkboard_nand_spl.c
> rename board/davinci/da8xxevm/{u-boot-spl.lds => u-boot-spl-da850evm.lds} (100%)
> rename nand_spl/board/davinci/da8xxevm/u-boot.lds => board/davinci/da8xxevm/u-boot-spl-hawk.lds (86%)
> create mode 100644 board/htkw/mcx/Makefile
> create mode 100644 board/htkw/mcx/mcx.c
> create mode 100644 board/htkw/mcx/mcx.h
> create mode 100644 board/omicron/calimain/Makefile
> create mode 100644 board/omicron/calimain/calimain.c
> create mode 100644 board/teejet/mt_ventoux/Makefile
> create mode 100644 board/teejet/mt_ventoux/mt_ventoux.c
> create mode 100644 board/teejet/mt_ventoux/mt_ventoux.h
> create mode 100644 doc/README.omap-ulpi-viewport
> create mode 100644 drivers/usb/host/ehci-omap.c
> create mode 100644 drivers/usb/ulpi/omap-ulpi-viewport.c
> create mode 100644 include/configs/calimain.h
> create mode 100644 include/configs/mcx.h
> create mode 100644 include/configs/mt_ventoux.h
> delete mode 100644 nand_spl/board/davinci/da8xxevm/Makefile
>
> I've tested the USB changes on Beagleboard xM and Pandaboard ES.
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
More information about the U-Boot
mailing list